Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CEOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Pressure-induced shift of effective Ce valence, Fermi energy and phase boundaries in CeOs 4 Sb 12

Abstract CeOs 4 Sb 12 , a member of the skutterudite family, has an unusual semimetallic low-temperature L -phase that inhabits a wedge-like area of the field H —temperature T phase diagram. We have conducted measurements of electrical transport and megahertz conductivity on CeOs 4 Sb 12 single crystals under pressures of up to 3 GPa and in high magnetic fields of up to 41 T to investigate the influence of pressure on the different H – T phase boundaries. While the high-temperature valence transition between the metallic H -phase and the L -phase is shifted to higher T by pressures of the order of 1 GPa, we observed only a marginal suppression of the S -phase that is found below 1 K for pressures of up to 1.91 GPa. High-field quantum oscillations have been observed for pressures up to 3.0 GPa and the Fermi surface of the high-field side of the H -phase is found to show a surprising decrease in size with increasing pressure, implying a change in electronic structure rather than a mere contraction of lattice parameters. We evaluate the field-dependence of the effective masses for different pressures and also reflect on the sample dependence of some of the properties of CeOs 4 Sb 12 which appears to be limited to the low-field region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fermi-surface topologies and low-temperature phases of the filled skutterudite compounds CeOs 4 Sb 12 and NdOs 4 Sb 12

We use MHz conductivity, torque magnetometer, and magnetization measurements to report on single crystals of CeOs 4 Sb 12 and NdOs 4 Sb 12 using temperatures down to 0.5 K and magnetic fields of up to 60 tesla. The field-orientation dependence of the de Haas-van Alphen and Shubnikov-de Haas oscillations is deduced by rotating the samples about the [ 010 ] and [ 0 $\bar{1}$ 1 1 ] directions. Our results indicate that NdOs 4 Sb 12 has a similar Fermi surface topology to that of the unusual superconductor PrOs 4 Sb 12 , but with significantly smaller effective masses, supporting the importance of local phonon modes in contributing to the low-temperature heat capacity of NdOs 4 Sb 12 . By contrast, CeOs 4 Sb 12 undergoes a field-induced transition from an unusual semimetal into a high-field, high-temperature state characterized by a single, almost spherical Fermi-surface section. Furthermore, the behavior of the phase boundary and comparisons with models of the band structure lead us to propose that the field-induced phase transition in CeOs 4 Sb 12 is similar in origin to the well-known α - γ transition in Ce and its alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CeO 2 Doping of Hf 0.5 Zr 0.5 O 2 Thin Films for High Endurance Ferroelectric Memories

Ferroelectric switching is demonstrated in CeO 2 -doped Hf 0.5 Zr 0.5 O 2 (HZCO) thin films with application in back-end-of-line compatible embedded memories. At low cerium oxide doping concentrations (2.0–5.6 mol%), the ferroelectric orthorhombic phase is stabilized after annealing at temperatures below 400 °C. HZCO ferroelectrics show reliable switching characteristics beyond 10 11 cycles in TiN/HZCO/TiN capacitors, several orders of magnitude greater than identically processed Hf 0.5 Zr 0.5 O 2 (HZO) capacitors, without sacrificing polarization and retention. Internal photoemission and photoconductivity experiments show that CeO 2 -doping introduces in-gap states in HZCO that are nearly aligned with TiN Fermi level, facilitating electron injection through these states. Furthermore, the enhanced average bulk conduction, which may lead to more uniform thermal dissipation in the HZCO films, delays irreversible degradation via breakdown that leads to device failure after repeated programming cycles.

36 MATERIALS SCIENCE↗

Structure of Nano-sized CeO 2 Materials: Combined Scattering and Spectroscopic Investigations

Here, the nature of nano-sized ceria, CeO 2 , systems were investigated using neutron and X-ray diffraction and X-ray absorption spectroscopy. Whilst both diffraction andtotal pair distribution functions (PDFs) revealed that in all the samples the occupancy of both Ce 4+ and O 2- are very close to the ideal stoichiometry, the analysis using reverse Monte Carlo technique revealedsignificant disorder around oxygen atoms in the nano sized ceria samples in comparison to the highly crystalline NIST standard.In addition, the analysis reveal that the main differences observed in the pair correlations from various X-ray and neutron diffraction techniques were attributed to the particle size of the CeO 2 prepared by the reported three methods. Furthermore, detailed analysis of the Ce L 3– and K-edge EXAFS data support this finding; in particular the decrease in higher shell coordination numbers with respect to the NIST standard, are attributed to differences in particle size.

36 MATERIALS SCIENCE↗

In situ growth, structure, and real-time chemical reactivity of well-defined CeO x -Ru(0001) model surfaces

Ceria is an important material for chemical conversion processes in catalysis. Its intrinsic properties as a reducible oxide can be exploited to achieve catalytic selectivity and activity. However, numerous phenomenological characteristics of ceria remain unknown and its active nature is ever slowly being unraveled. Well defined models of ceria (111) are an important way to systematically study these properties and take advantage of new in situ methods that require pristine materials that allow for the interrogation of the most fundamental traits of this material. The ceria-Ru(0001) model is now the most well studied model surface with numerous aspects of its preparation, atomic structure and reactivity studied by several groups. The preparation of CeO x structures oriented with a (111) surface termination can be achieved through molecular beam deposition, facilitating the growth of well-defined nanostructures, microparticles, and films on the Ru(0001) surface. The growth mechanism exploits the epitaxial relationship between CeOx and Ru to form a carpet mode of well oriented layers of Osingle bondCesingle bondO. These models can be studied to unravel the atomic structure and the oxidation state (Ce 4+ and Ce 3+ ), as prepared and under redox conditions (reduction/oxidation) or with reaction using reactants (e.g., H 2 , methanol). Here, we present a discussion of these most recent observations pertaining to the growth mode, arrangement of atoms on the surface, characteristic chemical state, and redox chemistry of the CeO x -Ru surface. As a result, with insights from these studies we propose new strategies to further unravel the chemistry of ceria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Activity and stability of mesoporous CeO 2 and ZrO 2 catalysts for the self-condensation of cyclopentanone

Metal oxides containing acid-base pairs are widely used as catalysts for aldol condensation reactions, but they are often prone to secondary condensation and fast deactivation. In this contribution, high-surface area mesoporous CeO 2 and ZrO 2 have been synthesized and tested as catalysts for the self-condensation of cyclopentanone, an attractive molecular building block for several biomass upgrading strategies. Here, the catalytic activity, stability, and overall kinetics behavior of these two catalysts have been compared in the liquid phase. A detailed kinetics analysis shows that on both oxides, the reaction is controlled by the initial unimolecular α-H abstraction step, in which cyclopentanone forms the crucial enolate intermediate. Subsequently, the enolate couples with another cyclopentanone molecule in a bimolecular C-C coupling step. CO 2 -TPD analysis and site titration with probe molecules indicate that initially the most active catalyst is the mesoporous ZrO 2 sample with strong base character. However, this catalyst exhibits a very rapid deactivation. By contrast, the mesoporous CeO 2 prepared in this study has lower basicity strength, which results in lower initial activity, but enhanced stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Irradiation-induced defect formation and damage accumulation in single crystal CeO 2

Here, the accumulation of irradiation-induced disorder in single crystal CeO 2 has been investigated over a wide range of ion fluences. Room temperature irradiations of epitaxial CeO 2 thin films using 2 MeV Au 2+ ions were carried out up to a total fluence of 1.3 x 10 16 cm –2 Post-irradiation disorder was characterized using ion channeling Rutherford backscattering spectrometry (RBS/C) and confocal Raman spectroscopy. The Raman measurements were interpreted by means of a phonon confinement model, which employed rigid ion calculations to determine the phonon correlation length in the irradiated material. Comparison between the dose dependent changes in correlation length of the Raman measurements and the Ce disorder fraction from RBS/C provides complementary quantitative details on the rate of point and extended defect formation on the Ce and O sub-lattices over a broad range of ion fluences. Raman measurements, which are significantly more sensitive than RBS/C at low doses, reveal that the nucleation rate of defects is highest below 0.1 displacements per atom (dpa). Comparison between Raman and RBS/C measurements suggests that between 0.1 and 10 dpa the damage evolution is characterized by modest growth of point defects and/or small clusters, while above 10 dpa the preexisting defects rapidly grow into extended clusters and/or loops.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Synthesis of morphology-controllable mesoporous Co{sub 3}O{sub 4} and CeO{sub 2}

Recently, extensive works have been devoted to the morphology control of mesoporous materials with respect to their use in various applications. In this paper, we used two kinds of mesoporous silica, SBA-15 rods and spheres as hard templates to synthesize morphology-controllable mesoporous metal oxides. By carefully controlling the loading of metal precursors in the mesopores of the hard template, mesoporous Co{sub 3}O{sub 4} and CeO{sub 2} with different morphologies, such as micrometer-sized rod, hollow sphere, saucer-like sphere, and solid sphere were conveniently obtained. The structural properties of these materials were characterized by XRD, BET, SEM and TEM. In addition, it is found that the differences observed in the textural properties of the two mesoporous metal oxides nanocasted from the same template can be attributed to the properties of metal precursors and the interaction between metal oxide and SiO{sub 2}. Thus-obtained mesoporous metal oxides with such special morphologies may have a potential application in the field of environmental catalytic oxidation. - Graphical Abstract: Mesoporous Co{sub 3}O{sub 4} and CeO{sub 2} with different morphologies, such as micrometer-sized rod, hollow sphere, saucer-like sphere, and solid sphere were synthesized by nanocasting.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of single-crystalline Ce(CO{sub 3})(OH) with novel dendrite morphology and their thermal conversion to CeO{sub 2}

Single-crystalline cerium carbonate hydroxide (Ce(CO{sub 3})(OH)) with dendrite morphologies have been successfully synthesized by hydrothermal method at 150 {sup o}C using Ce(NO{sub 3}){sub 3}.6H{sub 2}O as the cerium source, aqueous carbamide as both an alkaline and carbon source and poly(vinyl pyrrolidone) (PVP) as surfactant. Ceria (CeO{sub 2}) with dendrite morphologies have been fabricated by a thermal decomposition-oxidation process at 500 {sup o}C for 6 h using single-crystalline Ce(CO{sub 3})(OH) dendrites as the precursor. The dendrite morphologies of Ce(CO{sub 3})(OH) was sustained after thermal decomposition-oxidation to CeO{sub 2}. The as-prepared products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM), and thermogravimetric analysis (TG).

36 MATERIALS SCIENCE↗

Application of nanostructured Ca doped CeO{sub 2} for ultraviolet filtration

Calcium doped CeO{sub 2} nanoparticles with doping concentrations between 0 and 50 mol% were synthesized by a co-precipitation method for ultraviolet filtration application. Below 20 mol% doping concentration, the samples were single-phase. From 30 mol%, CaCO{sub 3} appears as a secondary phase. The calculated CeO{sub 2} mean crystallite size was 9.3 nm for the pure and 5.7 nm for the 50 mol% Ca-doped sample. Between 250 and 330 nm, the absorbance increased for the 10, 30, and 40 mol% Ca-doped samples compared to the pure one. The band-gap was found to be 3.20 eV for the undoped, and between 3.36 and 3.51 eV for the doped samples. The blue shifts are attributed to the quantum confinement effect. X-ray photoelectron spectroscopy showed that the Ce{sup 3+} atomic concentration in the pure sample was higher than that of the 20 mol% Ca-doped sample.

36 MATERIALS SCIENCE↗

Signature of room temperature ferromagnetism in Mn doped CeO{sub 2} nanoparticles

We report structural and magnetic properties of Mn doped CeO{sub 2} nanoparticles using X-ray diffraction (XRD), field emission transmission electron microscopy (FE-TEM) and dc magnetization measurements. XRD results infer that all the samples have single phase nature and lattice parameters decrease with Mn doping. The particle size calculated using XRD and TEM analysis was found to decrease with Mn doping. Field cooled magnetization measurement shows that the transition temperature is above room temperature. Magnetic hysteresis loop studies indicate that undoped and Mn doped CeO{sub 2} nanoparticles show weak ferromagnetic behavior at room temperature.

36 MATERIALS SCIENCE↗

Electronic structure analysis and properties of Sr{sub 2}CeO{sub 4} grown by sol–gel method

Highlights: ► Sr{sub 2}CeO{sub 4} nanopowders were obtained by sol–gel method. ► SEM/EDX imaging and chemical analysis have been done. ► XPS electronic structure was examined and discussed. ► The terminal and equatorial Ce-O bonds contributions were determined in O2p states. ► The energy gap was estimated by valence band and electrical measurements. -- Abstract: Sr{sub 2}CeO{sub 4} is a very promising material due to its various industrial applications, e.g. for the construction of field emission displays and light emitting diodes. In this work, the phosphor was synthesized by the sol–gel method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) methods. They proved to be very good structural properties of the material and identified negligible impurities from the technological process. The decomposition of the surface of the nanocrystals was found but this did not decrease the spectral features of the compound. The analysis of the XPS O2p lines revealed contributions of two kinds of bonds: terminal and equatorial ones, in the ratio of 2/4. They are separated by 1.2 eV what is in agreement with the observed absorption spectra. A presence of the decomposed layers may produce asymmetric widening of the emission spectra towards a lower energy.

36 MATERIALS SCIENCE↗

Microstructure characterization and electrical transport of nanocrystalline ZrO{sub 2}–CeO{sub 2} solid solution

Graphical abstract: - Highlights: • Monoclinic ZrO{sub 2} phase has been changed to cubic ZrO{sub 2} phase within a short milling. • Conductivity increases due to change of phase from monoclinic to cubic. • A maximum has been observed in the s–T curve. • A transformation from −ve to +ve ac magnetoconductance has been observed. - Abstract: Nanocrystalline ZrO{sub 2}–CeO{sub 2} (ZC) solid solution is synthesized by high energy ball-milling the powder mixture of monoclinic (m) ZrO{sub 2}–10 mol% CeO{sub 2} in air medium. X-ray powder diffraction (XRD) patterns show that the method IS effective to synthesize cubic (c) ZrO{sub 2} phase within a short milling time. Formation mechanism, structural and microstructural changes of different phases and relative phase abundances have been estimated by Rietveld analysis of XRD patterns. The dc conductivity has been enhanced due to monoclinic to cubic phase transformation. A transformation from small polaron hopping to correlated barrier hoping has been observed from the of temperature dependence frequency exponent study. A crossover from negative to positive ac magnetoconductance has been observed at temperature T = 280 K and 230 K for unmilled (ZC0H) and 8 h (ZC8H) milled samples, respectively.

36 MATERIALS SCIENCE↗

A 17 O paramagnetic NMR study of Sm 2 O 3 , Eu 2 O 3 , and Sm/Eu-substituted CeO 2

We report that paramagnetic solid-state NMR of lanthanide ( Ln ) containing materials can be challenging due to the high electron spin states possible for the Ln ƒ electrons, which result in large paramagnetic shifts, and these difficulties are compounded for 17 O due to the low natural abundance and quadrupolar character. In this work, we present examples of 17 O NMR experiments for lanthanide oxides and strategies to overcome these difficulties. In particular, we record and assign the 17 O NMR spectra of monoclinic Sm 2 O 3 and Eu 2 O 3 for the first time, as well as performing density functional theory (DFT) calculations to gain further insight into the spectra. The temperature dependence of the Sm 3+ and Eu 3+ magnetic susceptibilities are investigated by measuring the 17 O shift of the cubic sesquioxides over a wide temperature range, which reveal non-Curie temperature dependence due to the presence of low-lying electronic states. This behaviour is reproduced by calculating the electron spin as a function of temperature, yielding shifts which agree well with the experimental values. Using the understanding of the magnetic behaviour gained from the sesquioxides, we then explore the local oxygen environments in 15 at% Sm- and Eu-substituted CeO 2 , with the 17 O NMR spectrum exhibiting signals due to environments with zero, one and two nearest neighbour Ln ions, as well as further splitting due to oxygen vacancies. Finally, we extract an activation energy for oxygen vacancy motion in these systems of 0.35 ± 0.02 eV from the Arrhenius temperature dependence of the 17 O T1 relaxation constants, which is found to be independent of the Ln ion within error. Finally, the relation of this activation energy to literature values for oxygen diffusion in Ln -substituted CeO 2 is discussed to infer mechanistic information which can be applied to further develop these materials as solid-state oxide-ion conductors.

36 MATERIALS SCIENCE↗

Tuning the Placement of Pt “Single Atoms” on a Mixed CeO 2 –TiO 2 Support

Defect sites on the oxide supports can be used to anchor and activate "single-atoms" catalysts (SACs). By engineering the anchoring sites for supporting SACs, one can alter their electronic and atomic structures which, in turn, define their activity, selectivity, and stability for catalytic reactions. To create and tune unique sites for Pt SACs on CeO 2 support, in this work, we synthesized a system consisting of CeO 2 decorated on TiO 2 nano-oxides for supporting the Pt SACs and investigated the effect of Pt weight loading. Here, a combination of multiple structural characterization methods including diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) were employed to characterize the distribution of charge states of single atoms and evaluate the heterogeneity of their binding sites. We have found that the placement of Pt atoms can be tuned on a mixed oxide surface by changing the weight loading of Pt.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Theoretical Study of Trimethylacetic Acid Adsorption on CeO 2 (111) Surface

We investigated trimethylacetic acid (TMAA) adsorption on stoichiometric and oxygen-deficient CeO 2 (111) surfaces using density functional theory that accounts for the on-site Coulomb interaction via a Hubbard term (DFT+U) and long-range dispersion correction. Both the molecular state and dissociative state (TMAA → TMA– + H + ) were identified on stoichiometric and oxygen-deficient CeO 2 (111) surfaces. For the stoichiometric surface, two thermodynamically favorable configurations with adsorption energies of the order of -30 kcal/mol are identified; one is a molecule adsorption state, and the other one is a dissociative state. For the oxygen-deficient surface, dissociative states are more favorable than molecular states. Moreover, the most favorable configuration is the dissociative adsorption of TMAA with the adsorption energy of the order of -77 kcal/mol. The dissociated TMA moiety takes the position of oxygen vacancy, forming three Ce–O bonds. The signature vibrational frequencies for these thermodynamically stable structures are reported as well as their electronic structures. The effects of long-range dispersion interactions are found to be negligible for geometries but important for adsorption energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupling of Acetaldehyde to Crotonaldehyde on CeO 2– x (111): Bifunctional Mechanism and Role of Oxygen Vacancies

Selective C–C coupling of oxygenates is pertinent to the manufacture of fuel and chemical products from biomass and from derivatives of C 1 compounds (i.e., oxygenates produced from methane and CO 2 ). Here we report a combined experimental and theoretical study on the temperature-programmed reaction (TPR) of acetaldehyde (AcH) on a partially reduced CeO 2– x (111) thin film surface. The experiments have been carried out under ultra-high-vacuum conditions without continuous gas exposure, allowing better isolation of active sites and reactive intermediates than in flow reaction conditions. AcH does not undergo aldol condensation in a typical TPR procedure, even though the enolate form of AcH (CH 2 CHO) is readily produced on CeO 2– x (111) with oxygen vacancies. We find however that a tailored “double-ramp” TPR procedure is able to successfully produce an aldol adduct, crotonaldehyde (CrA). Using density functional theory calculations and microkinetic modeling we explore several possible C–C coupling pathways. We conclude that the double-ramp procedure allows surface oxygen vacancy dimers, stabilized by adsorbate occupation, to form dynamically during the TPR. The vacancy dimers in turn enable C–C coupling to occur between an enolate and an adjacent AcH molecule via a bifunctional enolate–keto mechanism that is distinct from conventional acid- or base-catalyzed aldol condensation reactions. Here, the proposed mechanism indicates that CrA desorption is rate-limiting while C–C coupling is facile.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗