Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boundary layer flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Report of secondary flows, boundary layers, turbulence and wave team, report 1

General criteria for a flight test option are that: (1) there be a good opportunity for comparison with other measurement techniques; (2) the flow to be measured is of considerable scientific or practical interest; and (3) the airborne laser Doppler system is well suited to measure the required quantities. The requirement for comparison, i.e., ground truth, is particularly important because this is the first year of operation for the system. It is necessary to demonstrate that the system does actually measure the winds and compare the results with other methods to provide a check on the system error analysis. The uniqueness of the laser Doppler system precludes any direct comparison, but point measurements from tower mounted wind sensors and two dimensional fields obtained from radars with substantially different sampling volumes are quite useful.

Scoggins, J. R.↗
NASA NTRS1980

A new coordinate transformation for turbulent boundary layer flows

The transformation permits a uniform mesh to be used in the computational coordinate which extends across the layer. This coordinate transformation uses the local value of the skin friction coefficient to scale the thickness of the wall layer region, and the local maximum value of turbulent viscosity to scale the boundary-layer thickness. Results are presented for two dimensional boundary layers in both positive and negative pressure gradients and comparisons are made with experimental data and conventional variable-grid results for low speed turbulent boundary-layers. The cases chosen illustrate the capability of this new transformation to capture the boundary layer growth over the full extent of laminar, transitional, and turbulent flow with no grid adjustment as well as its ability to consistently enlarge the wall layer region for accurate shear stress representation. Results of mesh refinement studies using the new coordinate transformation are presented.

Carter, J. E.↗
NASA NTRS1976

Low temperature simulation of subliming boundary layer flow in Jupiter atmosphere

A low-temperature approximate simulation for the sublimation of a graphite heat shield under Jovian entry conditions is studied. A set of algebraic equations is derived to approximate the governing equation and boundary conditions, based on order-of-magnitude analysis. Characteristic quantities such as the wall temperature and the subliming velocity are predicted. Similarity parameters that are needed to simulate the most dominant phenomena of the Jovian entry flow are also given. An approximate simulation of the sublimation of the graphite heat shield is performed with an air-dry-ice model. The simulation with the air-dry-ice model may be carried out experimentally at a lower temperature of 3000 to 6000 K instead of the entry temperature of 14,000 K. The rate of graphite sublimation predicted by the present algebraic approximation agrees to the order of magnitude with extrapolated data. The limitations of the simulation method and its utility are discussed.

Chen, C. J.↗
NASA NTRS1991

Modeling of the heat transfer in bypass transitional boundary-layer flows

A low Reynolds number k-epsilon turbulence model and conditioned momentum, energy and turbulence equations were used to predict bypass transition heat transfer on a flat plate in a high-disturbance environment with zero pressure gradient. The use of conditioned equations was demonstrated to be an improvement over the use of the global-time-averaged equations for the calculation of velocity profiles and turbulence intensity profiles in the transition region of a boundary layer. The approach of conditioned equations is extended to include heat transfer and a modeling of transition events is used to predict transition onset and the extent of transition on a flat plate. The events, which describe the boundary layer at the leading edge, result in boundary-layer regions consisting of: (1) the laminar, (2) pseudolaminar, (3) transitional, and (4) turbulent boundary layers. The modeled transition events were incorporated into the TEXSTAN 2-D boundary-layer code which is used to numerically predict the heat transfer. The numerical predictions in general compared well with the experimental data and revealed areas where additional experimental information is needed.

Simon, Frederick F.↗
NASA NTRS1978

Flight-measured pressure characteristics of aft-facing steps in thick boundary layer flow for transonic and supersonic Mach numbers

Aft-facing step base pressure flight data were obtained for three step heights for nominal transonic Mach numbers of 0.80, 0.90, and 0.95, and for supersonic Mach numbers of 2.2, 2.5, and 2.8 with a Reynolds number, based on the fuselage length ahead of the step, of about 10 to the 8th power. Surface static pressures were measured ahead of the step, behind the step, and on the step face (base), and a boundary layer rake was used to obtain boundary layer reference conditions. A comparison of the data from the present and previous experiments shows the same trend of increasing base pressure ratio (decreasing drag) with increasing values of momentum thickness to step height ratios. However, the absolute level of these data does not always agree at the supersonic Mach numbers. For momentum thickness to height ratios near 1.0, the differences in the base pressure ratios appear to be primarily a function of Reynolds number based on the momentum thickness. Thus, for Mach numbers above 2, the data analyzed show that the base pressure ratio decreases (drag increases) as Reynolds number based on momentum thickness increases for a given momentum thickness and step height.

Powers, S. G.↗
NASA NTRS1959

The Fluorescent-Oil Film Method and Other Techniques for Boundary-Layer Flow Visualization

A flow-visualization technique, known as the fluorescent-oil film method, has been developed which appears to be generally simpler and to require less experience and development of technique than previously published methods. The method is especially adapted to use in the large high-powered wind tunnels which require considerable time to reach the desired test conditions. The method consists of smearing a film of fluorescent oil over a surface and observing where the thickness is affected by the shearing action of the boundary layer. These films are detected and identified, and their relative thicknesses are determined by use of ultraviolet light. Examples are given of the use of this technique. Other methods that show promise in the study of boundary-layer conditions are described. These methods include the use of a temperature-sensitive fluorescent paint and the use of a radiometer that is sensitive to the heat radiation from a surface. Some attention is also given to methods that can be used with a spray apparatus in front of the test model.

Loving, Donald L.↗
NASA NTRS2012

Numerical Investigation of PLIF Gas Seeding for Hypersonic Boundary Layer Flows

Numerical simulations of gas-seeding strategies required for planar laser-induced fluorescence (PLIF) in a Mach 10 air flow were performed. The work was performed to understand and quantify adverse effects associated with gas seeding and to compare different flow rates and different types of seed gas. The gas was injected through a slot near the leading edge of a flat plate wedge model used in NASA Langley Research Center's 31- Inch Mach 10 Air Tunnel facility. Nitric oxide, krypton, and iodine gases were simulated at various injection rates. Simulation results showing the deflection of the velocity field for each of the cases are presented. Streamwise distributions of velocity and concentration boundary layer thicknesses as well as vertical distributions of velocity, temperature, and mass distributions are presented for each of the cases. Relative merits of the different seeding strategies are discussed.

Johanson, Craig T.↗
NASA NTRS1973

On local inflexional instability in boundary-layer flows.

Development of a linearized theory of the two- and three-dimensional incompressible viscous flows ensuing from locally unstable velocity profiles. Indications of the theory with respect to the instability of the two-dimensional separation bubble and the mechanisms underlying formation of the turbulence wedge behind a fixed roughness element are pointed out. In connection with the aforementioned mechanisms, a theoretically based argument is advanced that, as a result of local inflectional instability of the velocity profile in a succession of skewed planes, a corresponding succession of stationary vortices is induced, the induction process terminating at the boundaries of the turbulence wedge when the velocity profiles along the boundaries themselves become unstable. It is suggested that a rational method of predicting the occurrence of roughness-induced turbulence wedges might be possible if a theory were available for the steady laminar flow caused by the roughness at a stage just prior to transition.

Tobak, M.↗
NASA NTRS1979

A theoretical investigation of forebody shapes designed for natural laminar boundary-layer flow

The design of forebody shapes for natural laminar flow is discussed. For subsonic flow, computed results for three shapes of different fineness ratios indicate that laminar flow can be attained under conditions that approximate those on the forebody of a cruise missile flying at a low altitude at a high subsonic Mach number. For supersonic (Mach 2.00) design, a one-parameter family of hyperbolic arcs was used to generate forebody shapes having a favorable pressure gradient over the forebody length. Computed results for these shapes indicated laminar and transitional flow over the range of Reynolds numbers considered.

Barger, R. L.↗
NASA NTRS1979

Secondary instability in boundary-layer flows

The stability of a secondary Tollmien-Schlichting wave, whose wavenumber and frequency are nearly one half those of a fundamental Tollmien-Schlichting instability wave is analyzed using the method of multiple scales. Under these conditions, the fundamental wave acts as a parametric exciter for the secondary wave. The results show that the amplitude of the fundamental wave must exceed a critical value to trigger this parametric instability. This value is proportional to a detuning parameter which is the real part of k - 2K, where k and K are the wavenumbers of the fundamental and its subharmonic, respectively. For Blasius flow, the critical amplitude is approximately 29% of the mean flow, and hence many other secondary instabilities take place before this parametric instability becomes significant. For other flows where the detuning parameter is small, such as free-shear layer flows, the critical amplitude can be small, thus the parametric instability might play a greater role.

Nayfeh, A. H.↗
NASA NTRS1980

Report of secondary flows, boundary layers, turbulence and wave team

Correspondence concerning the comparison of horizontal wind fields, two dimensional spectra, heat flux, mesoscale divergence and deformation in the prestorm environment, and thunderstorm gust front winds is presented. Other subjects include the use of radar to determine heating rate and evaporation near the Earth's surface for an unstable boundary layer and statistical considerations in the estimation of wind fields from single Doppler radar and application to prestorm boundary layer observations.

Doviak, R.↗
NASA NTRS1981

Multiple-scale turbulence modeling of boundary layer flows for scramjet applications

As part of an investigation into the application of turbulence models to the computation of flows in advanced scramjet combustors, the multiple-scale turbulence model was applied to a variety of flowfield predictions. The model appears to have a potential for improved predictions in a variety of areas relevant to combustor problems. This potential exists because of the partition of the turbulence energy spectrum that is the major feature of the model and which allows the turbulence energy dissipation rate to be out of phase with turbulent energy production. The computations were made using a consistent method of generating experimentally unavailable initial conditions. An appreciable overall improvement in the generality of the predictions is observed, as compared to those of the basic two-equation turbulence model. A Mach number-related correction is found to be necessary to satisfactorily predict the spreading rate of the supersonic jet and mixing layer.

Fabris, G.↗
NASA NTRS1982

Stability of compressible three-dimensional boundary-layer flows

For compressible three-dimensional flow, the method of multiple scales to formulate the three-dimensional stability problem and determine the partial-differential equations governing variations of the amplitude and complex wavenumbers is used. A method for following one specific wave along its trajectory to ascertain the characteristics of the most unstable disturbance is proposed. Numerical results using the flow over the X-21 wing as calculated from the Kaups-Cebeci code will be presented.

Reed, H. L.↗