Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Beam interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Measurement of the positron-electron reaction which produces a gamma ray pair in the region psi/3684/

An experiment was conducted to measure gamma ray pairs produced in the electron-positron reaction in the region of psi(3684) resonance. The apparatus consisted of two identical spectrometers mounted in a collinear configuration about the beam interaction region. Graphs are presented for the coplanarity angle between reconstructed gamma ray directions, for the scattering and energy deposition of gamma rays in the two crystals used, and for the observed rate of annihilation reactions as a function of center of mass energy.

Hughes, E. B.↗
NASA NTRS1978

Environmental considerations for the microwave beam from a solar power satellite

Solar power satellite (SPS) systems in geosynchronous orbit are possible future energy sources. The SPS concept uses a highly focused microwave beam to transmit the energy to the earth. The microwave power transmission system parameters are summarized, emphasizing those parameters which may affect the earth's environment. Environmental impacts of the microwave beam are discussed. The power levels for the main beam, sidelobes, grating lobes, and ground receiving antenna reradiation patterns are presented. Ionospheric/microwave beam interaction studies, experimental and theoretical, are reviewed. Possible radio frequency interference sources and the magnitude of expected interference levels are discussed.

Arndt, G. D.↗
NASA NTRS1985

Objectives and design of the Echo 6 electron beam experiment - Large ionospheric perturbations and energetic particle patterns

The data from the March 30, 1983 launching of Echo 6 are presented. Echo 6 contained duplex accelerators and a system of four throw away detectors to detect and analyze conjugate electron echoes. The model used to calculate the proper trajectory of the rocket and the reason for not detecting echoes are discussed. The components of the plasma diagnostic package which was used to study the electron beam interactions with the ionospheric plasma, and the functions of the two controllable electron guns and the two sets of orthogonal electric probes are described. The signal-mode potentials between each probe and the plasma diagnostic payload are investigated. The signals produced by the gun pulses are analyzed and the interpretation of the electric field probe response is examined.

Winckler, J. R.↗
NASA NTRS1986

Optical digital logic operations by two-beam coupling in photorefractive material

The nonlinear phenomena of signal beam saturation, pump beam depletion, and optically controlled coupling coefficient of two-beam interaction in photorefractive materials are analyzed. Applications of these phenomena to digital logic operations is discussed and supported by experimental results obtained in photorefractive BaTiO3.

Fainman, Y.↗
NASA NTRS1990

Current collection model on tether satellite system

Results are reported from numerical simulations of current collection by a tethered satellite moving in the earth magnetic field. The focus is on the instruments of the Research on Orbital Plasma Electrodynamics (ROPE) experiment planned for the TSS-1 mission (scheduled launch 1991). The derivation of the governing equations is outlined, and the results of simulations with and without the geomagnetic field are presented in graphs. It is predicted that beam-beam interaction will occur when no magnetic effect is present, especially when the instrument bias is lower than the local potential; with the magnetic effect, there should be complex multiple-stream interactions, magnetic-field shielding covering 30 percent or more of the satellite surface when the B field is greater than 0.35 G, and nearly complete collection of the electrons by the instrument arm.

Hwang, K. S.↗
NASA NTRS1990

Properties and applications of photorefractive GaAs

Photorefractive semiconductors have the attractive features of fast response times and operation at near-infrared wavelengths. This has opened some new research opportunities in the field of photorefractive nonlinear optics which is significant for applications in real-time image processing and optical computing. This paper presents recent experimental demonstrations of several basic optical information processing techniques using photorefractive GaAs crystals. The results of these demonstrations illustrate that photorefractive compound semiconductors has a great potential as a new medium for light beam interaction based on the dynamic holographic principle.

Cheng, Li-Jen↗
NASA NTRS1992

Plasma wave profiles of earth's bow shock at low Mach numbers - ISEE 3 observations on the far flank

A survey of selected crossings far downstream from the subsolar shock is presented in which the overall plasma wave (PW) behavior of a selected set of nearly perpendicular crossings and another set of limited Mach number but broad geometry are delinated. The result is a generalizable PW signature, or signatures, of low Mach number shocks and some likely implications of those signatures for the weak shock's plasma physical processes on the flank. The data are found to be consistent with the presence of ion beam interactions producing noise ahead of the shock in the ion acoustic frequency range. The presence or absence, and the amplitudes, of PW activity are explainable by the presence or absence of a population of upstream ions controlled by the component of the interplanetary magnetic field normal to the solar wind flow.

Greenstadt, E. W.↗
NASA NTRS1993

Simulation of TunneLadder traveling-wave tube cold-test characteristics: Implementation of the three-dimensional, electromagnetic circuit analysis code micro-SOS

The three-dimensional, electromagnetic circuit analysis code, Micro-SOS, can be used to reduce expensive time-consuming experimental 'cold-testing' of traveling-wave tube (TWT) circuits. The frequency-phase dispersion characteristics and beam interaction impedance of a TunneLadder traveling-wave tube slow-wave structure were simulated using the code. When reasonable dimensional adjustments are made, computer results agree closely with experimental data. Modifications to the circuit geometry that would make the TunneLadder TWT easier to fabricate for higher frequency operation are explored.

Kory, Carol L.↗
NASA NTRS1992

On the termination of the closed field line region of the magnetotail

Experimental models and global computer simulations are used to study the field structure and location of the site where the closed plasma sheet terminates. The site - also called the 'distant neutral line' - is described with references to several solar-wind parameters that can change its characteristic properties. A laboratory experiment is then conducted in which a flowing magnetized plasma beam interacts with a dipole field. High-latitude nightside reconnection is supported by the simulation results comparing the effects of northward and southward interplanetary fields. The results support the models by Dungey (1961, 1963) that predict high-latitude nightside reconnection and an open magnetosphere. A significant finding is that a magnetic neutral line at the closed-field line region is not a necessary component of the region.

Birn, J.↗
NASA NTRS1993

Artificial auroras in the upper atmosphere. II - Imaging results

On the ATLAS 1 mission (STS-45, launched March 24, 1992) two experiments, AEPI (Atmospheric Emissions Photometric Imaging) and SEPAC (Space Experiments with Particle Accelerators) performed the first of a series of active experiments intended to probe the atmosphere, ionosphere and magnetosphere with electron beams. The luminous artificial aurora generated by the electron beam interaction was detected and measured by AEPI both in white light and in a narrow wavelength band at 427.8 nm (peak intensity 5 kR). Modelling calculation showed that there was a significant contribution from emissions originating near the spacecraft. The spatial intensity distribution of the observed auroral patch is consistent with emission contribution from both high and low altitude regions. An extended tail in the direction of the shuttle wake was observed in the 427.8 nm channel, consistent with a decay time associated with the dissipation of the hot electron plasma.

Mende, S. B.↗
NASA NTRS1997

Computer Simulation of Microwave Devices

The accurate simulation of cold-test results including dispersion, on-axis beam interaction impedance, and attenuation of a helix traveling-wave tube (TWT) slow-wave circuit using the three-dimensional code MAFIA (Maxwell's Equations Solved by the Finite Integration Algorithm) was demonstrated for the first time. Obtaining these results is a critical step in the design of TWT's. A well-established procedure to acquire these parameters is to actually build and test a model or a scale model of the circuit. However, this procedure is time-consuming and expensive, and it limits freedom to examine new variations to the basic circuit. These limitations make the need for computational methods crucial since they can lower costs, reduce tube development time, and lessen limitations on novel designs. Computer simulation has been used to accurately obtain cold-test parameters for several slow-wave circuits. Although the helix slow-wave circuit remains the mainstay of the TWT industry because of its exceptionally wide bandwidth, until recently it has been impossible to accurately analyze a helical TWT using its exact dimensions because of the complexity of its geometrical structure. A new computer modeling technique developed at the NASA Lewis Research Center overcomes these difficulties. The MAFIA three-dimensional mesh for a C-band helix slow-wave circuit is shown.

Kory, Carol L.↗
NASA NTRS2007

Nonlinear Optics and Applications

Nonlinear optics is the result of laser beam interaction with materials and started with the advent of lasers in the early 1960s. The field is growing daily and plays a major role in emerging photonic technology. Nonlinear optics play a major role in many of the optical applications such as optical signal processing, optical computers, ultrafast switches, ultra-short pulsed lasers, sensors, laser amplifiers, and many others. This special review volume on Nonlinear Optics and Applications is intended for those who want to be aware of the most recent technology. This book presents a survey of the recent advances of nonlinear optical applications. Emphasis will be on novel devices and materials, switching technology, optical computing, and important experimental results. Recent developments in topics which are of historical interest to researchers, and in the same time of potential use in the fields of all-optical communication and computing technologies, are also included. Additionally, a few new related topics which might provoke discussion are presented. The book includes chapters on nonlinear optics and applications; the nonlinear Schrodinger and associated equations that model spatio-temporal propagation; the supercontinuum light source; wideband ultrashort pulse fiber laser sources; lattice fabrication as well as their linear and nonlinear light guiding properties; the second-order EO effect (Pockels), the third-order (Kerr) and thermo-optical effects in optical waveguides and their applications in optical communication; and, the effect of magnetic field and its role in nonlinear optics, among other chapters.

Abdeldayem, Hossin A.↗
DOE OSTI2024

Designing Track for Electrospinning Unit and Cost-Effective Laser Scanning System

Nanofibers are produced in the Targeted Systems Department (TSD) by applying a large voltage to the nanofiber fluid and the collection apparatus known as the electrospinner. The fiber is then shot out of nozzles and collected onto the electrospinner into a nanofiber mat. The problem is that since the nozzle heads are stationary, there is non-uniform deposition of nanofiber on the collection drum leading to variation in thickness of the produced nanofiber mat. To mitigate this issue, a reciprocating mechanism is designed to move the nozzle along the drum collector along with the ability to vary its stroke length. This design was realized using Siemens NX and several parts were printed using a 3D printer, but is, as of writing, untested. Second project involved providing an alternative method to scan a large sample that had undergone certain surface deformation by beam interaction and detect out of plane deformation such as micro-scale swelling and surface roughness. Systems to carry out this scanning already exist; however, they are expensive and produce many files that need to be stitched together and are cumbersome to deal with. The solution is to create a scanning system using an already purchased scanning laser and linear stage motor. The laser and stage motor were combined to produce length results that aligned with a digital microscope but differing height results.

Ruffolo, Leopoldo↗
DOE OSTI2024

Designing a track for an electrospinning unit and cost-effective laser scanning system

Nanofibers are produced in the Targeted Systems Department (TSD) by applying a large voltage to the nanofiber fluid and the collection apparatus known as the electrospinner. The fiber is then shot out of nozzles and collected onto the electrospinner into a nanofiber mat. The problem is that since the nozzle heads are stationary, there is non-uniform deposition of nanofiber on the collection drum leading to variation in thickness of the produced nanofiber mat. To mitigate this issue, a reciprocating mechanism is designed to move the nozzle along the drum collector along with the ability to vary its stroke length. This design was realized using Siemens NX and several parts were printed using a 3D printer, but is, as of writing, untested. Second project involved providing an alternative method to scan a large sample that had undergone certain surface deformation by beam interaction and detect out of plane deformation such as micro-scale swelling and surface roughness. Systems to carry out this scanning already exist; however, they are expensive and produce many files that need to be stitched together and are cumbersome to deal with. The solution is to create a scanning system using an already purchased scanning laser and linear stage motor. The laser and stage motor were combined to produce length results that aligned with a digital microscope but differing height results.

Ruffolo, Leopoldo↗
NASA NTRS1982

Space Experiments with Particle Accelerators (SEPAC)

Plans for SEPAC, an instrument array to be used on Spacelab 1 to study vehicle charging and neutralization, beam-plasma interaction in space, beam-atmospheric interaction exciting artificial aurora and airglow, and the electromagnetic-field configuration of the magnetosphere, are presented. The hardware, consisting of electron beam accelerator, magnetoplasma arcjet, neutral-gas plume generator, power supply, diagnostic package (photometer, plasma probes, particle analyzers, and plasma-wave package), TV monitor, and control and data-management unit, is described. The individual SEPAC experiments, the typical operational sequence, and the general outline of the SEPAC follow-on mission are discussed. Some of the experiments are to be joint ventures with AEPI (INS 003) and will be monitored by low-light-level TV.

Obayashi, T.↗