Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aqueous solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Aqueous solution-based synthesis approach for carbon-disordered rocksalt composite cathode development and its limitations

Disordered rocksalt cathodes exhibit high specific capacities and high energy density; however, their low electronic conductivity poses a great challenge. Herein, we explored an aqueous-solution-based synthesis route that involves controlling the surface charges of Li 1.2 Mn 0.6 Ti 0.2 O 1.8 F 0.2 (LMTOF) to be anchored by a few-layer reduced graphene oxide (rGO) for the first time. The uniform rGO wrapping on the surface of the LMTOF particles is achieved by electrostatic attraction between the negatively charged rGO and positively charged LMTOF particles. Although the initial specific capacity of rGO-LMTOF composite increased by 58 % compared to the pristine LMTOF, the composite experienced a severe capacity fade over cycling. The synthesis process in an aqueous medium resulted in Li + /H + exchange and TM dissolution as evidenced from inductively coupled plasmon analysis and X-ray diffraction analysis. Therefore, this work suggests the search for alternative media or conditions for the synthesis of carbon-disordered rock salt cathode composite.

25 ENERGY STORAGE↗
DOE OSTI2026

Stabilization of Miscible Aqueous Phases via Diffusion‐Controlled Multifunctional Nanoparticle‐Ligand Complexation

Liquid‐in‐liquid structuring by harnessing miscible aqueous domains can be achieved by inducing thermodynamically defined phase separation using aqueous solutions of incompatible solutes, where immiscibility is dictated by the concentrations of the solutes. For instance, in aqueous two‐phase systems (ATPSs), the interfacial tension between the two different aqueous solutions is so small that it stabilizes the phase‐separated domains, but not their shape, thus falling short of designing tunable, robust structures. Here, we introduce a diffusion‐controlled strategy that enables liquid‐in‐liquid compartmentalization absent a thermodynamically defined interface or bulk liquid‐liquid phase separation using a barrier formed in situ at the initial contact boundary of an aqueous dispersion of multifunctional nanoparticles and a solution of multifunctional ligands in pure water or a water/alcohol mixture. The nanoparticles and ligands are entropically driven to disperse uniformly but interact at the initial contact boundary more rapidly than bulk mixing, forming a layer that establishes a barrier akin to a semi‐permeable membrane and allows the formation of tubular compartments. A wealth of opportunities is enabled by the proposed technique, where examples in separations, soft electronic devices, and ultralight porous electromagnetic shielding materials are shown.

cryogels↗
DOE OSTI2023

Iodine Capture by Ag-Loaded Solid Sorbents Followed by Ag Recycling and Iodine Immobilization: An End-to-End Process

Here, this article demonstrates the complete process of I 2(g) capture using Ag-exchanged faujasite (AgX) and Ag-exchanged mordenite (AgZ) zeolite sorbents, the recovery of Ag for recyclability of iodine capture, and the immobilization of iodide (from the elution process) into an iodosodalite waste form, which is chemically and environmentally stable. The gaseous iodine, I 2(g) , was captured in the AgX via chemisorption by Ag and converted to AgI within the aluminosilicate zeolite frameworks. The elution reaction in Na 2 S resulted in the precipitation of Ag 2 S and dissolution of I – and Na + into the aqueous solution, where powdered sorbent showed higher conversion efficiency than the granular form, which is attributed to Na 2 S-solution diffusion limitations in the granules. The Ag 2 S-containing aluminosilicate precipitates were filtered out of the solution, and the filtrate (aqueous solution) was used to synthesize iodosodalite to immobilize iodide. The iodine capture using the recovered Ag 2 S-containing sorbents shows equivalent iodine loadings to the AgX starting material of Q e = 0.355 g/g for powdered material and 0.255 g/g for granular material, demonstrating the potential recycling of Ag for iodine capture as Ag 2 S-based sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Simulations of activities, solubilities, transport properties, and nucleation rates for aqueous electrolyte solutions

This article reviews recent molecular simulation studies of "collective" properties of aqueous electrolyte solutions, specifically free energies and activity coefficients, solubilities, nucleation rates of crystals, and transport coefficients. These are important fundamental properties for biology and geoscience, but also relevant for many technological applications. Their determination from molecular-scale calculations requires large systems and long sampling times, as well as specialized sampling algorithms. As a result, such properties have not typically been taken into account during optimization of force field parameters; thus, they provide stringent tests for the transferability and range of applicability of proposed molecular models. There has been significant progress on simulation algorithms to enable the determination of these properties with good statistical uncertainties. Comparisons of simulation results to experimental data reveal deficiencies shared by many commonly used models. Moreover, there appear to exist specific tradeoffs within existing modeling frameworks, so that good prediction of some properties is linked to poor prediction for specific other properties. For example, non-polarizable models that utilize full charges on the ions generally fail to predict accurately both activity coefficients and solubilities; the concentration dependence of viscosity and diffusivity for these models is also incorrect. Scaled-charge models improve the dynamic properties and could also perform well for solubilities, but fail in the prediction of nucleation rates. Even models that do well at room temperature for some properties generally fail to capture their experimentally observed temperature dependence. Finally, the main conclusion from the present review is that qualitatively new physics will need to be incorporated in future models of electrolyte solutions to allow description of collective properties for broad ranges of concentrations, temperatures, and solvent conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

An investigation of the physical and chemical changes of Pd nanoparticles on carbon supports in response to the release of hydrogen from aqueous formate solutions

Palladium nanoparticles on carbon supports (Pd/C) are effective for catalyzing hydrogen release from aqueous formate solutions but typically suffer from a gradual decrease of activity. This study finds two primary factors influencing activity: (i) the number of available surface Pd sites, and (ii) metal-support interactions which depend on the nature of the C support. We propose that the Pd/C catalyst is structure insensitive and undergoes Ostwald ripening to yield an active ‘conditioned’ catalyst with dispersion plateauing between ca. 15–20 %. Contrary to earlier studies, in-situ XANES experiments show that PdO is not an active catalyst for formate dehydrogenation. Calcination of Pd/C before dehydrogenation increases the catalytic activity which suggests a beneficial, albeit temporary, modification of the metal support interaction. N-containing supports minimize nanoparticle growth and also increase activity through a metal-support interaction. In conclusion, these findings advance our understanding of catalyst evolution and stability in formate dehydrogenation systems.

Formate dehydrogenation↗
DOE OSTI2026

Data for 3-Hydroxypropionic Acid Recovery from Fermentation Broth through Novel Downstream Processing: Technoeconomic Analysis

This study develops and validates a simplified, fully solvent-free downstream processing (DSP) strategy for high-purity recovery of 3-hydroxypropionic acid (3-HP) from real fermentation broth containing 62.3 g/L of 3-HP. Optimized activated carbon treatment achieved 98% color removal, while Amberlite IRA-67 was operated at pH 4.5 and 30 °C to minimize product loss. This is the first integrated demonstration of a fully solvent-free DSP enabling recovery of bio-based 3-HP as both a solid sodium salt and a concentrated aqueous solution, supported by techno-economic analysis. At lab scale, the process achieved 77.3% recovery of sodium 3-HP with 83.2% (w/w) purity and produced a 30% (w/v) aqueous solution. Techno-economic analysis yielded minimum selling prices of $0.551/kg for the solution and $0.892/kg for the salt, both below target thresholds for cost-competitive bio-acrylic acid production. Overall, these results demonstrate an efficient, scalable, and economically viable industrial pathway for 3-HP recovery.

Bioproducts↗
DOE OSTI2020

Stabilizing Aqueous Three-Dimensional Printed Constructs Using Chitosan-Cellulose Nanocrystal Assemblies

The assembly and binding of nanoparticles at the interfaces of aqueous two-phase systems enable the three-dimensional (3D) printing of all-aqueous naturally occurring materials. When a dispersion of cellulose nanocrystals (CNCs) in an aqueous solution of polyethylene glycol (PEG) is brought into contact with chitosan dissolved in an aqueous solution of dextran, the CNCs and chitosan diffuse to the interface between the two immiscible aqueous solutions, electrostatically interact, and form a solid, membranous layer sufficiently rapidly to 3D print tubules of one liquid in the other. Additionally, the diameter, length, spatial arrangement, and stability of the printed tubules can be broadly controlled. Adsorption and directional diffusion of ionic species across the membranous layer make heavy metal ion removal possible. The results present a platform for fabricating and developing all-aqueous compartmentalized systems where function can be independently coupled to the inherent functionality of the nanoparticles or ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effective Storage of Electrons in Water by the Formation of Highly Reduced Polyoxometalate Clusters

Aqueous solutions of polyoxometalates (POMs) have been shown to have potential as high-capacity energy storage materials due to their potential for multi-electron redox processes, yet the mechanism of reduction and practical limits are currently unknown. Herein, we explore the mechanism of multi-electron redox processes that allow the highly reduced POM clusters of the form {MO 3 } y to absorb y electrons in aqueous solution, focusing mechanistically on the Wells-Dawson structure X 6 [P 2 W 18 O 62 ], which comprises 18 metal centers and can uptake up to 18 electrons reversibly (y = 18) per cluster in aqueous solution when the countercations are lithium. This unconventional redox activity is rationalized by density functional theory, molecular dynamics simulations, UV-vis, electron paramagnetic resonance spectroscopy, and small-angle X-ray scattering spectra. These data point to a new phenomenon showing that cluster protonation and aggregation allow the formation of highly electron-rich meta-stable systems in aqueous solution, which produce H 2 when the solution is diluted. Finally, we show that this understanding is transferrable to other salts of [P 5 W 30 O 110 ] 15- and [P 8 W 48 O 184 ] 40- anions, which can be charged to 23 and 27 electrons per cluster, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Non-Equilibrium Nucleation of Rare Earth Metals at Aqueous Interfaces

We conducted mechanical and electrical perturbation experiments on several systems of NdCl 3 aqueous solutions with two phosphonic acids, one as a stable surfactant with high surface activity and another that was fully soluble in aqueous solution. We also conducted experiments with solely the salt in aqueous solution. Our goal was to stimulate surface aggregation at the air/aqueous solution interface that was observable by Brewster angle microscopy, surface tension, and/or surface spectroscopy. We observed changes only with the surface active phosphonic acid. Additional work is needed to further explore confined environments to stimulate surface aggregation events.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Guanidine compounds for carbon dioxide capture

A method for removing carbon dioxide from a gaseous source, the method comprising: (i) contacting said gaseous source with an aqueous solution of a carbon dioxide sorbent that reacts with carbon dioxide to form an aqueous-soluble carbonate or bicarbonate salt of said carbon dioxide sorbent; (ii) contacting the aqueous solution from step (i) with a bis-iminoguanidine carbon dioxide complexing compound, which is different from the carbon dioxide sorbent, to result in precipitation of a carbonate or bicarbonate salt of said carbon dioxide complexing compound and regeneration of the carbon dioxide sorbent; and (iii) removing the precipitated carbonate or bicarbonate salt from the aqueous solution in step (ii) to result in a solid form of said carbonate or bicarbonate salt of the carbon dioxide complexing compound. The method may further include a step (iv) of regenerating the carbon dioxide complexing compound by subjecting the precipitated salt to sufficient heat and/or vacuum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Experimental Steps toward a Density Law for Chlorine-Crediting Criticality Models of Aqueous Plutonium solutions

Criticality accident prevention is an essential safety consideration for all operations involving fissionable and fissile materials. Predictive criticality calculations using advanced neutron transport codes, such as Monte Carlo N-Particle Transport (MCNP), are invaluable tools for designing and implementing operational limits. While indispensable, these tools are limited by the quality and accuracy of the inputs that the user provides to define the modeled system. Parameters such as atomic composition, shape, and material density must be accurately defined to obtain a meaningful result. In the case of material property details for a plutonium model, accurate material characterization data is sometimes sparse. Thus limitations in calculation accuracy can be reduced by improving our knowledge of material properties in the targeted fissile systems. One of the biggest remaining challenges to accurately defining fissile systems is the description of aqueous fissile solutions. Even simple properties, such as density, are not well-known for fissile solutions relevant to nuclear energy and security. Described here are initial efforts undertaken to improve criticality calculation inputs for fissile plutonium chloride solutions in water. This effort is focused on experimentally determining accurate solution characteristics for ternary plutonium chloride/hydrochloric acid/water systems, by measurement of water activity and solution density. The effect of inputting experimental densities for these solutions into MCNP criticality calculations is compared to the traditional approach of modeling an idealized (and fictitious) plutonium-water mixture. Expansion of these efforts to a working density law for aqueous plutonium chloride solutions is also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Hydration Mimicry by Membrane Ion Channels

Ions transiting biomembranes might pass readily from water through ion-specific membrane proteins if these protein channels provide environments similar to the aqueous solution hydration environment. In fact, bulk aqueous solution is an important reference condition for the ion permeation process. Assessment of this hydration mimicry concept depends on understanding the hydration structure and free energies of metal ions in water in order to provide a comparison for the membrane channel environment. To refine these considerations, we review local hydration structures of ions in bulk water and the molecular quasi-chemical theory that provides hydration free energies. In doing so, we note some current views of ion binding to membrane channels and suggest new physical chemical calculations and experiments that might further clarify the hydration mimicry concept.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Biosorption of Uranium by Bone Meal

The treatment of aqueous solution waste containing organic compounds and radionuclides has always been a great concern since the processes available are usually expensive and unfeasible for the low volume of radioactive liquid waste recovered. In view of a more efficient and low cost treatment, biosorption-based technologies for the removal of this hazardous radionuclides, heavy metals, and organic substances from contaminated matrices have been studied as an alternative process. In this context, bone meal is the material of choice, and contains calcium phosphate in the form of hydroxyapatite. Previous studies with hydroxyapatite showed that this material is efficient in removing heavy metals from polluted soils due to its adsorbing ability. In this context, uranium biosorption capacity by using bone meal was evaluated by different experimental conditions. This study aims at analyzing the capacity of bone meal to remove uranium from aqueous solution through biosorption process, considering that this nuclide is radiotoxic and may cause serious environmental problems and risks to human life if not correctly disposed. The biosorption capacity of U by bone meal was evaluated under different experimental conditions. The results suggested that adsorption with this material can be applied in the treatment of aqueous solutions as a low-cost and highly efficient alternative to remove U. Therefore, we believe that our results are useful for other investigators dealing with similar problems. Further work is required to evaluate this material as a potential adsorbent concerning the treatment of liquid organic radioactive waste containing uranium. Next studies are crucial to ascertain the biosorption efficiency, by analyzing other variables, such as adsorbent dosage, pH and temperature.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Stress Corrosion Cracking of NaSICON Membranes in Aqueous Electrolytes for Redox-Flow Batteries

The sodium super-ionic conductor (NaSICON) has versatile applications as a ceramic electrolyte for energy storage, where it can serve as an impermeable separator in solid-state batteries and redox flow systems. In particular, NaSICON systems have been proposed to be relatively stable in contact with water, making them compatible with aqueous battery chemistries. However, owing to their brittle nature and metal oxide constituents, stress-corrosion cracking (SCC) is an important failure mechanism that has not been previously explored. In this study, we assess the fracture toughness of NaSICON membranes in contact with aqueous solutions that are relevant to redox flow systems. Microindentation was performed to generate visible surface cracks and residual stress, which were observed to grow in length after exposure to aqueous solutions. This allows for a quantitative measurement of fracture toughness, which decreases after exposure to water. To contextualize these results, we develop a simplified model of the fracture behavior in aqueous redox-flow batteries that incorporate NaSICON membranes, illustrating the importance of SCC in cell design. This work provides quantitative insights into SCC as a failure mode in NaSICON, enhancing our understanding of the chemo-mechanical behavior of ceramic electrolytes in contact with aqueous solutions.

Zhang, Mengyao↗
DOE OSTI2025

Insights into determining pore size properties of ultrafiltration membranes

The selectivity of porous membranes is often characterized using solute rejection tests, where membranes are challenged with dilute aqueous solutions of neutral solutes at operating conditions that minimize concentration polarization and fouling. In single solute tests, a membrane is challenged with one molecular weight (MW) solute at a time from low to high MW. Since single solute methods are time-intensive, mixed solute tests have become more common, where a mixture of several MW solutes challenges a membrane at once. However, the presence of large solutes in a mixture increases the rejection of smaller solutes. Furthermore, there are no universally accepted operating conditions or standard methods used by membrane manufacturers or researchers for the experiments, leading to difficulty in pore size and pore characteristic comparisons. In this paper, commercial ultrafiltration membranes were challenged with single and mixed solute polyethylene glycol (PEG) and dextran aqueous solutions. First, rejection values determined using total organic carbon (TOC) and high-performance liquid chromatography (HPLC) from single solute filtration experiments are compared. Differences in rejection curves obtained by the two techniques are attributed to solute polydispersity. Mixed solute filtration experiments with binary mixtures of solutes showcased co-solute interactions, which increase with both the size and weight percent of large solute in the mixture. Mixed solute filtration experiments at varying operating conditions (i.e., stir speed and flux) were conducted to determine operating conditions that mitigate co-solute interactions. Stir speed had a minimal effect on co-solute interactions. In contrast, low flux conditions can help minimize co-solute interactions, leading to pore size distributions that closely resemble results observed in single solute filtration using narrowly dispersed solutes. Additionally, at low flux conditions, the predicted membrane pore size distributions utilizing mixed solute experiments with PEG and dextran were similar.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electrocatalysts, and fuel cells containing them

Provided are electrocatalysts, fuel cells, methods of making fuel cells, and methods of generating an electric current, each featuring a platinum (Pt)-containing substrate in contact with an aqueous solution comprising Pb2+. Electrocatalysts of the invention are formed via underpotential deposition (UPD) when a trace amount of Pb2+ is present in the electrolyte of a half anodic cell for oxidizing formic acid using Pt as the anode. Surprisingly, the UPD process dramatically enhances the activity of formic acid oxidation, at least as much as 10-fold compared with palladium (Pd) black. In an embodiment, the electrocatalyst comprises a Pt-containing substrate, a submonolayer of lead (Pb) adsorbed onto the Pt-containing substrate, and an aqueous solution comprising Pb2+, wherein the concentration of Pb2+ in the aqueous solution is 10 to 500 μm.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

A new capability for investigating the structure and dynamics of liquids at high pressures

Water and aqueous solutions are critical to many areas of science and technology. As a result, tremendous effort has been devoted to understanding them in detail. Despite over a century of research, fundamental questions about water and aqueous solutions remain unanswered. However, an intriguing possibility – that liquid water can exist in two thermodynamically distinct states – has emerged as the most likely explanation. The problem is that experimental confirmation of this hypothesis requires experiments on water at high pressures and low temperatures, conditions in which liquid water only exists briefly before turning into crystalline ice. This project investigated the feasibility of developing a new capability for study water and aqueous solutions under these challenging conditions. The physical constraints, such as the timescales for crystallization and thermal diffusion in supercooled water, were evaluated along with their impact on the design criteria for the instrument. Several basic design options were considered that could meet the technical requirements. The options were also evaluated with respect to their use of commercially available equipment versus the need for custom designs or in-house development. The project identified two viable options to pursue. The first option would use a high-pressure syringe pump in conjunction with fused silica (or sapphire) capillaries. The second option would use a diamond anvil cell. These options can both be used with optical spectroscopies, such as Raman or Infrared.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗