Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Approximate boundary”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Numerical Investigation of Film Coefficient Approximation for Chemically Reacting Boundary-Layer Flows

Aerothermal analysis of spacecraft planetary entry is heavily dependent on heritage engineering models. The film coefficient heat transfer model examined in this paper estimates the convective heating to the vehicle for a laminar, dissociated, chemically reacting boundary layer for an Earth atmosphere. This model requires information about the vehicle and flowfield for a given trajectory point and estimates a proportional relationship between enthalpy potential and convective heat flux. In practice it is the aerothermal engineer who must decide which assumptions are appropriate for his/her application. This work looks at numerous CFD simulations for an arbitrary, axisymmetric flight vehicle to analyze the relative importance of both the mass and energy constraints imposed at the wall boundary, as well as the effect of various diffusion models. Within the subset of tested energy boundary conditions, it is found that the most desirable energy boundary condition is the radiative equilibrium boundary condition, which permits conservative estimates of convective heat flux, but also generates flowfield-dependent spatial thermal distributions along the surface. Other key findings are presented in an effort to make the film coefficient engineering model readily available to design engineers across industry.

Film coefficient↗
NASA NTRS2022

Developing Data-Driven Artificial Neural Network for A High Throughput Retrieval of Aerosol Optical Depth and Surface Temperature of Mars

In this work, we aim to developartificial neural network(ANN)techniquesto reproduce the retrieval results ofphysical quantities from spacecraft observations of solar system bodiesusing radiative transfer methods. The particular application here is the retrieval of dust optical depth, water-ice optical depth, and surface temperatureonMarsusingdaytime observationsobtained by the Thermal Emission Spectrometer (TES) onboard the Mars Global Surveyor.Compared against the results obtained from traditional radiative transfer retrieval techniques, our ANN successfully recoveredthe three quantitiesusingdaytime observations. The principal advantage of thesemachine learning(ML) algorithms istheir complete automation and highthroughput. Therefore, the algorithms presented here would be useful for very large datasets andwould make practical the sampling of many different approximations or boundary conditions related to a given observation dataset and retrieval problem.

Rafael Moreno↗
NASA NTRS2022

Model Predictive Control in the Three-body Problem Using Invariant Funnels As Terminal Sets

This paper describes a method for augmenting Model Predictive Control techniques using invariant funnels computed in the Circular Restricted Three-Body Problem. We use ellipsoids that roughly approximate the boundary of the invariant funnel as convex terminal sets for a short look-ahead optimization problem at each time step. We apply this method to a hypothetical low-thrust mission to land on Jupiter’s mooon Europa and show that including the invariant funnels as terminal sets reduces the amount of control effort required by almost an order of magnitude.

Close, Sigrid↗
NASA NTRS1974

A recurrence matrix method for the analysis of longitudinal and torsional vibrations in non-uniform multibranch beams with variable boundary conditions

An approximate method for calculating the longitudinal and torsional natural frequencies and associated modal data of a beamlike, variable cross section multibranch structure is presented. The procedure described is the numerical integration of the first order differential equations that characterize the beam element in longitudinal motion and that satisfy the appropriate boundary conditions.

Davis, R. B.↗
NASA NTRS1987

Approximation of discrete-time LQG compensators for distributed systems with boundary input and unbounded measurement

The approximation of optimal discrete-time linear quadratic Gaussian (LQG) compensators for distributed parameter control systems with boundary input and unbounded measurement is considered. The approach applies to a wide range of problems that can be formulated in a state space on which both the discrete-time input and output operators are continuous. Approximating compensators are obtained via application of the LQG theory and associated approximation results for infinite dimensional discrete-time control systems with bounded input and output. Numerical results for spline and modal based approximation schemes used to compute optimal compensators for a one dimensional heat equation with either Neumann or Dirichlet boundary control and pointwise measurement of temperature are presented and discussed.

Gibson, J. S.↗
NASA NTRS1988

Approximation of discrete-time LQG compensators for distributed systems with boundary input and unbounded measurement

The approximation of optimal discrete-time linear quadratic Gaussian (LQG) compensators for distributed parameter control systems with boundary input and unbounded measurement is considered. The approach applies to a wide range of problems that can be formulated in a state space on which both the discrete-time input and output operators are continuous. Approximating compensators are obtained via application of the LQG theory and associated approximation results for infinite dimensional discrete-time control systems with bounded input and output. Numerical results for spline and modal based approximation schemes used to compute optimal compensators for a one-dimensional heat equation with either Neumann or Dirichlet boundary control and pointwise measurement of temperature are presented and discussed.

Gibson, J. S.↗
NASA NTRS1997

The Cretaceous-Tertiary Impact Crater and the Cosmic Projectile that Produced it

Evidence gathered to date from topographic data, geophysical data, well logs, and drill-core samples indicates that the buried Chicxulub basin, the source crater for the approximately 65 Ma Cretaceous-Tertiary (K/T) boundary deposits, is approximately 300 km in diameter. A prominent topographic ridge and a ring of gravity anomalies mark the position of the basin rim at approximately 150 km from the center. Wells in this region recovered thick sequences of impact-generated breccias at 200-300 m below present sea level. Inside the rim, which has been severely modified by erosion following impact, the subsurface basin continues to deepen until near the center it is approximately 1 km deep. The best planetary analog for this crater appears to be the 270 km-diameter Mead basin on Venus. Seismic reflection data indicate that the central zone of downward displacement and excavation (the transient crater is approximately 130 km in diameter, consistent with previous studies of gravity anomaly data). Our analysis of projectile characteristics utilizes this information, coupled with conventional scaling relationships, and geochemical constraints on the mass of extraterrestrial material deposited within the K/T boundary layer. Results indicate that the Chicxulub crater would most likely be formed by a long-period comet composed primarily of nonsilicate materials (ice, hydrocarbons, etc.) and subordinate amounts (less than or equal to 50 percent) primitive chondritic material. This collision would have released the energy equivalent to between 4 x 10(exp 8) and 4 x 10(exp 9) megatons of TNT. Studies of terrestrial impact rates suggest that such an event would have a mean production rate of approximately 1.25 x 10(exp -9) y(exp -1). This rate is considerably lower than that of the major mass extinctions over the last 250 million years (approximately 5 x 10(exp -7) y(exp -1). Consequently, while there is substantial circumstantial evidence establishing the cause-effect link between the Chicxulub basin forming event and the K/T biological extinctions, the results of our analysis do not support models of impact as a common or singular causative agent of mass extinctions on Earth.

Sharpton, Virgil L.↗
NASA NTRS2024

Filament Wound Composite Analysis Using the NASA Multiscale Analysis Tool (NASMAT) and Finite Element Analysis

Fiber reinforced composite materials, owing to their tailorable thermomechanical and functional properties, allow one to produce a structure that is stronger, stiffer, and lighter than its metal counterpart while performing the same function, yielding a more efficient structure. This not only allows for the improvement of current technologies like aircraft structures, but also enables new technologies like gaseous hydrogen storage for mobility applications, which are otherwise impractical when manufactured using traditional metals due to weight and space restrictions or material embrittlement. However, the use of composites imposes greater design and manufacturing challenges on an engineer, since they are heterogenous, having a distinct structure across multiple length scale, behave generally anisotropically at the structural level and require complex manufacturing and processing methods. Capturing this complex behavior requires detailed numerical simulations, including the modeling of microstructural features like undulations, voids, and fiber alignment. In this paper, multiple repeating unit cells (RUCs), representing filament wound composites, are developed (via a script provided in the Appendix) and analyzed. The refinement of these RUCs is varied, and the analyses are performed using both the Abaqus finite element software and the NASA Multiscale Analysis Tool (NASMAT). A study is undertaken to compare the predicted effective elastic properties of the wound RUC to a laminate representation of the wound RUC, which neglects the undulations. Additionally, two different sets of periodic boundary conditions (PBCs) have been examined. One approximates the real boundary conditions using a standard approach and the other represents the PBCs exactly through the use of an offset. Lastly, a comparison of the local elastic stress fields is made among the models and approaches. Since wound structures are often approximated as laminated structures, it is important to understand the degree to which this assumption is valid, namely by first comparing the elastic constants and local elastic fields. This will provide, on the one hand, information concerning the bulk mechanical behavior and, on the other hand, insights concerning local load distributions and likely damage initiation sites.

Composites↗
NASA NTRS1980

Motion about the stable libration points in the linearized, restricted three-body problem

The motion of a point particle in the neighborhood of a triangular libration point (L sub 4 or L sub 5) in the linearized, restricted problem of three bodies in the plane is described. The derivation of the equations of motion is standard. From these equations, three invariants of the motion are obtained; the Jacobi integral is expressed linearly in terms of two of these. The trajectories for varied initial conditions are drawn, and a complete geometric description of the particle motion is given in elementary terms. Each trajectory has an exterior boundary curve; its equation is found. An approximation to this boundary curve was known; the two curves are compared graphically. For certain initial conditions, there is an interior region from which the trajectory is excluded; the equation of the boundary of this region is given.

Mittleman, D.↗
NASA NTRS1993

High-order cyclo-difference techniques: An alternative to finite differences

The summation-by-parts energy norm is used to establish a new class of high-order finite-difference techniques referred to here as 'cyclo-difference' techniques. These techniques are constructed cyclically from stable subelements, and require no numerical boundary conditions; when coupled with the simultaneous approximation term (SAT) boundary treatment, they are time asymptotically stable for an arbitrary hyperbolic system. These techniques are similar to spectral element techniques and are ideally suited for parallel implementation, but do not require special collocation points or orthogonal basis functions. The principal focus is on methods of sixth-order formal accuracy or less; however, these methods could be extended in principle to any arbitrary order of accuracy.

Carpenter, Mark H.↗
NASA NTRS1988

Coupling of the radiative, convective, and surface fluxes over the equatorial Pacific

An idealized energy-balance model for a closed tropical circulation is first presented to illustrate the coupling between the net tropospheric cooling, the surface fluxes, and the mean subsidence away from the precipitation zones. Then a one-dimensional diagnostic model and a radiation model with boundary layer clouds are combined to explore this coupling for a specific region, using mean sounding data over the tropical Pacific. The radiatively driven subsidence rate at the top of the convective boundary layer is approximately 35 mb/day and is largely independent of boundary layer cloud fraction. The sensitivity of the corresponding convective heat flux profiles to the mass divergence profile and cloud fraction within the boundary layer is explored. Reasonable assumptions give realistic surface sensible and latent heat fluxes for this region of approximately 10 and 130 W/sq m. The paper illustrates the important background climatic control of the radiation field on the tropical surface fluxes.

Ridgway, W.↗
NASA NTRS1992

Approximate two layer (inviscid/viscous) methods to model aerothermodynamic environments

Approximate inviscid and boundary layer techniques for aerodynamic heating calculations are discussed. An inviscid flowfield solution is needed to provide surface pressures and boundary-layer edge properties. Modified Newtonian pressures coupled with an approximate shock shape will suffice for relatively simple shapes like sphere-cones with cone half-angles between 15 and 45 deg. More accurate approximate methods have been developed which make use of modified Maslen techniques. Slender and large angle sphere-cones and more complex shapes generally require an Euler code, like HALIS, to provide that information. The boundary-layer solution is reduced significantly by using the axisymmetric analog and approximate heating relations developed by Zoby, et al. (1981). Analysis is presented for the calculation of inviscid surface streamlines and metrics. Entropy-layer swallowing effects require coupling the inviscid and boundary-layer solutions.

Dejarnette, Fred R.↗
NASA NTRS1984

Universal single level implicit algorithm for gasdynamics

A single level effectively explicit implicit algorithm for gasdynamics is presented. The method meets all the requirements for unconditionally stable global iteration over flows with mixed supersonic and supersonic zones including blunt body flow and boundary layer flows with strong interaction and streamwise separation. For hyperbolic (supersonic flow) regions the method is automatically equivalent to contemporary space marching methods. For elliptic (subsonic flow) regions, rapid convergence is facilitated by alternating direction solution sweeps which bring both sets of eigenvectors and the influence of both boundaries of a coordinate line equally into play. Point by point updating of the data with local iteration on the solution procedure at each spatial step as the sweeps progress not only renders the method single level in storage but, also, improves nonlinear accuracy to accelerate convergence by an order of magnitude over related two level linearized implicit methods. The method derives robust stability from the combination of an eigenvector split upwind difference method (CSCM) with diagonally dominant ADI(DDADI) approximate factorization and computed characteristic boundary approximations.

Lombard, C. K.↗
NASA NTRS1991

The effect of multi-periapse burns on planetary escape and capture

The use of multiple periapse burns to transfer between a planetocentric parking orbit and a hyperbolic trajectory with a high thrust propulsion system having constant, finite thrust is investigated. Such multiple burns offer propellant savings as a consequence of reduced velocity losses which accrue over the finite burn time of thrusting maneuvers. Velocity losses for an earth escape phase are calculated for an optimum steering program over a range of parameters that are typical of a Mars mission. These numerically integrated results are compared to velocity losses evaluated with a leading analytic approximation to establish boundaries within which the accuracy of the analytic approximation is adequate for preliminary mission planning purposes. Finally, results of the investigation are used to define typical benefits of the multi-periapse burn concept for Mars exploration missions.

Horsewood, Jerry L.↗
NASA NTRS1972

On the calculation of three dimensional laminar boundary layer flows

An approximation which reduces the computation of three dimensional, laminar, compressible, boundary layer equations to the problem of solving two dimensional type boundary layer equations is presented. A comparison of this method with a fully three dimensional boundary layer calculation is provided.

Fillo, J. A.↗
NASA NTRS1955

Calculations of Laminar Heat Transfer Around Cylinders of Arbitrary Cross Section and Transpiration-Cooled Walls with Application to Turbine Blade Cooling

An approximate method for the development of flow and thermal boundary layers in the laminar region on cylinders with arbitrary cross section and transpiration-cooled walls is obtained by the use of Karman's integrated momentum equation and an analogous heat-flow equation. Incompressible flow with constant property values throughout the boundary layer is assumed. The velocity and temperature profiles within the boundary layer are approximated by expressions composed of trigonometric functions. Shape parameters for these profiles and functions necessary for the solution of the boundary-layer equations are presented as graphs so that the calculation for any specific case is reduced to the solution of two first-order differential equations. This method is applied to determine local heat-transfer coefficients and surface temperatures in the laminar flow region of the transpiration-cooled turbine blades for a given coolant flow rate, or to calculate the coolant flow distribution which is necessary in order to keep the blade temperature uniform along the surface.

Eckert, E R G↗
NASA NTRS1974

Differential analysis for the turbulent boundary layer on a compressor blade element (including boundary-layer separation)

A two-dimensional differential analysis is developed to approximate the turbulent boundary layer on a compressor blade element with strong adverse pressure gradients, including the separated region with reverse flow. The predicted turbulent boundary layer thicknesses and velocity profiles are in good agreement with experimental data for a cascade blade, even in the separated region.

Schmidt, J. F.↗