Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Analytical Balance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Government/Industry Workshop on Payload Loads Technology

A fully operational space shuttle is discussed which will offer science the opportunity to explore near earth orbit and finally interplanetary space on nearly a limitless basis. This multiplicity of payload/experiment combinations and frequency of launches places many burdens on dynamicists to predict launch and landing environments accurately and efficiently. Two major problems are apparent in the attempt to design for the diverse environments: (1) balancing the design criteria (loads, etc.) between launch and orbit operations, and (2) developing analytical techniques that are reliable, accurate, efficient, and low cost to meet the challenge of multiple launches and payloads. This paper deals with the key issues inherent in these problems, the key trades required, the basic approaches needed, and a summary of the state-of-the-art techniques.

Source record↗
NASA NTRS1981

Discrepancies between theoretical and empirical models of the flaring solar chromosphere and their possible resolution

Possible sources of pronounced discrepancy between empirical and theoretical models of the solar chromosphere during flares are discussed. It is noted that a principal source of uncertainty in empirical models is the inhomogeneity of the spectral data on which they are based. With theoretical models, probably the most important source of error is neglect of the radiative coupling of upper and lower chromospheric regions. A new procedure for studying flare energy input is suggested wherein the required input is derived from the empirical model chromosphere. This procedure is applied to the electron-heated case, and it is found that the integral equation defining the flare energy deposition rate can be inverted analytically to yield the injected electron flux energy spectrum from knowledge of the energy balance in the empirical atmosphere. Recent empirical model results are analyzed in this manner, and the calculated injected electron flux spectrum is compared with that needed for hard X-ray bursts in moderately large flares.

Emslie, A. G.↗
NASA NTRS1982

A mathematical model of turbulence in flows with uniform stationary velocity gradients

Certain cases of turbulence as a postinstability state of a fluid in motion modeled by the introduction of multivalued velocity fields are examined. The turbulence is regarded as occurring in the form of random pulsations which grow until the external energy input in the average flow is balanced by the dissipated energy of pulsations by means of turbulent friction. Closed form analytic solutions are shown to be possible when the considered velocity fields, the pulsation velocity and the fluid velocity, are decoupled.

Zak, M. A.↗
NASA NTRS1985

Opening of the magnetic field lines in a fast rotating magnetosphere, with an application to Jupiter

A simple model of a magnetosphere rotating around a rotating Jupiter-like object with a spin-aligned dipolar moment mu is considered. A low-energy plasma is released by inner sources located beyond the corotation radius and is diffused outward through closed lines. The lines form a closed thin equatorial disk, maintaining a quasi-static balance between the centrifugal force and the magnetic tension. Solutions are obtained for the analytical equations characterizing the plasma in the closed region; the structure of the magnetic field outside the disk; and the self-consistent value of the critical radius r sub zero. The analytical solutions are compared to the observed properties of the Jovian magnetosphere, and the results are discussed in detail.

Aly, J. J.↗
NASA NTRS1990

Non-linear dynamics of a spur gear pair

The backlash nonlinearity excited primarily by transmission error between spur gear pairs is studied for both external and internal excitations. The digital simulation technique and the method of harmonic balance are used to develop steady state solutions for the internal sinuosidal excitations. The analytic predictions agreed well with available experimental data. Digital simulation is used to observe that at the chaotic and subharmonic resonances may exist in a gear pair depending on the mean or design load, mean to alternating force ratio, damping, and backlash.

Kahraman, A.↗
NASA NTRS2000

Bending Boundary Layers in Laminated-Composite Circular Cylindrical Shells

An analytical, parametric study of the attenuation of bending boundary layers or edge effects in balanced and unbalanced, symmetrically and unsymmetrically laminated thin cylindrical shells is presented for nine contemporary material systems. The analysis is based on the linear Sanders-Koiter shell equations and specializations to the Love-Kirchhoff shell equations and Donnell's equations are included. Two nondimensional parameters are identified that characterize and quantify the effects of laminate orthotropy and laminate anisotropy on the bending boundary-layer decay length in a very general and encompassing manner. A substantial number of structural design technology results are presented for a wide range of laminated-composite cylinders. For all the laminate constructions considered, the results show that the differences between results that were obtained with the Sanders-Koiter shell equations, the Love-Kirchhoff shell equations, and Donnell's equations are negligible. The results also show that the effect of anisotropy in the form of coupling between pure bending and twisting has a negligible effect on the size of the bending boundary-layer decay length of the balanced, symmetrically laminated cylinders considered. Moreover, the results show that coupling between the various types of shell anisotropies has a negligible effect on the calculation of the bending boundary-layer decay length in most cases. The results also show that in some cases neglecting the shell anisotropy results in underestimating the bending boundary-layer decay length and in other cases it results in an overestimation.

Nemeth, Michael P.↗
NASA NTRS2010

Using Leaf Chlorophyll to Parameterize Light-Use-Efficiency Within a Thermal-Based Carbon, Water and Energy Exchange Model

Chlorophylls absorb photosynthetically active radiation and thus function as vital pigments for photosynthesis, which makes leaf chlorophyll content (C(sub ab) useful for monitoring vegetation productivity and an important indicator of the overall plant physiological condition. This study investigates the utility of integrating remotely sensed estimates of C(sub ab) into a thermal-based Two-Source Energy Balance (TSEB) model that estimates land-surface CO2 and energy fluxes using an analytical, light-use-efficiency (LUE) based model of canopy resistance. The LUE model component computes canopy-scale carbon assimilation and transpiration fluxes and incorporates LUE modifications from a nominal (species-dependent) value (LUE(sub n)) in response to short term variations in environmental conditions, However LUE(sub n) may need adjustment on a daily timescale to accommodate changes in plant phenology, physiological condition and nutrient status. Day to day variations in LUE(sub n) were assessed for a heterogeneous corn crop field in Maryland, U,S.A. through model calibration with eddy covariance CO2 flux tower observations. The optimized daily LUE(sub n) values were then compared to estimates of C(sub ab) integrated from gridded maps of chlorophyll content weighted over the tower flux source area. The time continuous maps of daily C(sub ab) over the study field were generated by focusing in-situ measurements with retrievals generated with an integrated radiative transfer modeling tool (accurate to within +/-10%) using at-sensor radiances in green, red and near-infrared wavelengths acquired with an aircraft imaging system. The resultant daily changes in C(sub ab) within the tower flux source area generally correlated well with corresponding changes in daily calibrated LUE(sub n) derived from the tower flux data, and hourly water, energy and carbon flux estimation accuracies from TSEB were significantly improved when using C(sub ab) for delineating spatio-temporal variations in LUE(sub n). The results demonstrate the synergy between thermal infrared and shortwave reflective wavebands in producing valuable remote sensing data for operational monitoring of carbon and water fluxes.

Houlborg, Rasmus↗
NASA NTRS2011

Combining Observations in the Reflective Solar and Thermal Domains for Improved Mapping of Carbon, Water and Energy FLuxes

This study investigates the utility of integrating remotely sensed estimates of leaf chlorophyll (C(sub ab)) into a thermal-based Two-Source Energy Balance (TSEB) model that estimates land-surface CO2 and energy fluxes using an analytical, light-use-efficiency (LUE) based model of canopy resistance. Day to day variations in nominal LUE (LUE(sub n)) were assessed for a corn crop field in Maryland U.S.A. through model calibration with CO2 flux tower observations. The optimized daily LUE(sub n) values were then compared to estimates of C(sub ab) integrated from gridded maps of chlorophyll content weighted over the tower flux source area. Changes in Cab exhibited a curvilinear relationship with corresponding changes in daily calibrated LUE(sub n) values derived from the tower flux data, and hourly water, energy and carbon flux estimation accuracies from TSEB were significantly improved when using C(sub ab) for delineating spatio-temporal variations in LUE(sub n). The results demonstrate the synergy between thermal infrared and shortwave reflective wavebands in producing valuable remote sensing data for monitoring of carbon and water fluxes.

Houborg, Rasmus↗
DOE OSTI2020

The mean logarithm emerges with self-similar energy balance.

The attached eddy hypothesis of Townsend (The Structure of Turbulent Shear Flow, 1956, Cambridge University Press) states that the logarithmic mean velocity admits self-similar energy-containing eddies which scale with the distance from the wall. Over the past decade, there has been a significant amount of evidence supporting the hypothesis, placing it to be the central platform for the statistical description of the general organisation of coherent structures in wall-bounded turbulent shear flows. Nevertheless, the most fundamental question, namely why the hypothesis has to be true, has remained unanswered over many decades. Under the assumption that the integral length scale is proportional to the distance from the wall y , in the present study we analytically demonstrate that the mean velocity is a logarithmic function of y if and only if the energy balance at the integral length scale is self-similar with respect to y , providing a theoretical basis for the attached eddy hypothesis. The analysis is subsequently verified with the data from a direct numerical simulation of incompressible channel flow at the friction Reynolds number Reτ≃5200 (Lee & Moser, J. Fluid Mech., vol. 774, 2015, pp. 395–415).

42 ENGINEERING↗
NASA NTRS1995

Simulation of 100-300 GHz solid-state harmonic sources

Accurate and efficient simulations of the large-signal time-dependent characteristics of second-harmonic Transferred Electron Oscillators (TEO's) and Heterostructure Barrier Varactor (HBV) frequency triplers have been obtained. This is accomplished by using a novel and efficient harmonic-balance circuit analysis technique which facilitates the integration of physics-based hydrodynamic device simulators. The integrated hydrodynamic device/harmonic-balance circuit simulators allow TEO and HBV circuits to be co-designed from both a device and a circuit point of view. Comparisons have been made with published experimental data for both TEO's and HBV's. For TEO's, excellent correlation has been obtained at 140 GHz and 188 GHz in second-harmonic operation. Excellent correlation has also been obtained for HBV frequency triplers operating near 200 GHz. For HBV's, both a lumped quasi-static equivalent circuit model and the hydrodynamic device simulator have been linked to the harmonic-balance circuit simulator. This comparison illustrates the importance of representing active devices with physics-based numerical device models rather than analytical device models.

NONLINEAR CIRCUITS↗
NASA NTRS1981

Development of high-speed balancing technology

An investigation into laser material removal showed that laser burns act in a manner typical of mechanical stress raisers causing a reduction in fatigue strength; the fatigue strength is lowered relative to the smooth specimen fatigue strength. Laser-burn zones were studied for four materials: Alloy Steel 4340, Stainless Steel 17-4 PH, Inconel 718, and Aluminum Alloy 6061-T6. Calculations were made of stress concentration factors K, for laser-burn grooves of each material type. A comparison was then made to experimentally determine the fatigue strength reduction factor. These calculations and comparisons indicated that, except for the 17-4 PH material, good agreement (a ratio of close to 1.0) existed between Kt and Kf. The performance of the 17-4 PH material has been attributed to early crack initiation due to the lower fatigue resistance of the soft, unaged laser-affected zone. Also covered in this report is the development, implementation, and testing of an influence coefficient approach to balancing a long, slender shaft under applied-torque conditions. Excellent correlation existed between the analytically predicted results and those data obtained from testing.

Demuth, R.↗
NASA NTRS1987

Electrostatic charge on a dust size distribution in a plasma

The capacitance of a grain immersed in a steady state plasma containing a size distribution of dust particles is studied. The grain charge is determined by assuming the equilibrium potential has been obtained by a simple balance of electron and ion collection currents. It is shown that the validity of the analytical treatment given here for the linearized Poisson equation is confined to a certain region of space. Within this region and starting at very small plasma Debye length lambda(D), the capacitance at first exhibits a monotonic increase with increasing lambda(D). The capacitance eventually reaches a maximum, followed by a monotonic decrease. The charge density of the dust in the plasma is found to be only a function of the lambda(D); there is no significant dependence on the interparticle spacing.

Houpis, Harry L. F.↗
NASA NTRS1989

An experiment-based comparative study of fuzzy logic control

An approach is presented to the control of a dynamic physical system through the use of approximate reasoning. The approach has been implemented in a program named POLE, and the authors have successfully built a prototype hardware system to solve the cartpole balancing problem in real-time. The approach provides a complementary alternative to the conventional analytical control methodology and is of substantial use when a precise mathematical model of the process being controlled is not available. A set of criteria for comparing controllers based on approximate reasoning and those based on conventional control schemes is furnished.

Berenji, Hamid R.↗
DOE OSTI2021

Determination of Carbon, Hydrogen, Nitrogen, and Oxygen in Bio-Oils: Laboratory Analytical Procedure (LAP)

The determination of total carbon, hydrogen, and nitrogen in bio-oils is important as these values can be used to track the carbon balance of production processes as well as calculate total oxygen content by difference. Oxygen content of bio-oils is a key metric for production and upgrading strategies as these are typically aimed at reducing oxygen. Oxygenates in bio-oils contribute to poor hydrocarbon miscibility, high acidity, high viscosity, and poor stability. Upgrading of bio-oils via deoxygenation produces hydrocarbons which can be used to generate feedstocks for renewable fuels and chemicals. In this Laboratory Analytical Procedure (LAP), combustion-based ultimate analysis is used to determine the weight percent (wt%) of C, H, and N in bio-oils and upgraded products. Ultimate analysis uses high temperatures and a pure oxygen environment to completely combust organic samples to carbon dioxide (CO 2 ), water (H 2 O), and nitrogen oxides (NO x ). In this procedure the amount of C and H in the sample are quantified by measuring resultant CO 2 and H 2 O with Fourier-transform infrared spectroscopy (FTIR). For N, NO x is reduced to nitrogen (N 2 ) which is measured with a thermal conductivity detector (TCD), providing total N content.

09 BIOMASS FUELS↗
NASA NTRS1995

Contact and pressure balance structures in two-fluid cosmic-ray hydrodynamics

The role of cosmic-ray-modified contact discontinuities and pressure balance structures in two-fluid cosmic-ray hydrodynamics in one Cartesian space dimension are investigated by means of analytic and numerical solution examples, as well as by weakly nonlinear asymptotics. The fundamental wave modes of the two-fluid cosmic-ray hydrodynamic equations in the long-wavelength limit consist of the backward and forward propagating cosmic-ray-modified sound waves, with sound speed dependent on both the cosmic-ray and thermal gas pressures; the contact discontinuity; and a pressure balance mode in which the sum ofthe cosmic ray and thermal gas pressure perturbations is zero. The pressure balance mode, like the contact discontinuity is advected with the background flow. The interaction of the pressure balance mode with the contact discontinuity is investigated by means of the method of multiple scales. The thermal gas and cosmic-ray pressure perturbations satisfy a linear diffusion equation, and entropy perturbations arising from nonisentropic initial conditions for the thermal gas are frozen into the fluid. The contact discontinuity and pressure balance eigenmodes both admit nonzero perturbations in the thermal gas, whereas the cosmic-ray-modified sound waves are isentropic. The total entropy perturbation is shared between the contact discontinuity and pressure balance eigenmodes, and examples are given in which there is a transfer of entropy between the two modes. In particular, N-wave type density disturbances are obtained which arise as a result of the entropy transfer between the two modes. A weakly nonlinear geometric optics perturbation expansion is used to study the long timescale evolution of the short-wavelength entropy wave and the thermal gas sound waves in a slowly varying, large-scale background flow. The weakly nonlinear geometric optics expansion is also used to generalize previous studies of squeezing instability for short-wavelength sound waves in the two fluid model, by including a weakly nonlinear wave steepening term that leads to shock formation, as well as the effect of long time and space dependence of the background flow. Implications of cosmic-ray-modified pressure balance structures and contact discontinuities in models of the interaction of traveling interplanetary shocks and compression and rarefraction waves with the solar wind termination shock are briefly discussed.

Webb, G. M.↗
DOE OSTI2023

Towards a heat- and mass-balanced kinetic model of TATB decomposition

We report TATB (1,3,5-triamino-2,4,6-trinitrobenzene) was thermally degraded by two small-scale analytical methods – simultaneous differential scanning calorimetry and thermogravimetric analysis (SDT) and a hot-stage microscope with Fourier Transform Infrared (FTIR) analysis capabilities. SDT used ramped heating, isothermal soaking, and thermal pretreatment at various conditions. The heat flow and mass loss were monitored during various treatment conditions to derive chemical decomposition kinetics and Arrhenius parameters. FTIR experiments used isothermal heating, and changes were monitored spectroscopically. Solid samples generated at specific conditions were collected from both methods and were analyzed by DMSO extraction followed by chemical speciation by optical and mass spectrometric methods. Characterization provided the following reaction insights: TATB decreases in a sigmoidal pattern in isothermally heated samples. Other soluble products gradually increase in concentration and then abruptly decline in concentration during the second exotherm, such as diamino-dinitro-benzofurazan and amino-nitro-benzodifurazan. FTIR showed gradual changes in the amino and nitro functionality, shifting positions and decreasing intensity for the first 40 min. Then the solid gradually appeared more like an amorphous C with N incorporated, similar to previous studies on thermally degraded TATB-type materials. Extracted residues (DMSO-soluble components removed) examined by FTIR showed an abrupt change in chemical composition between 40- and 45-min isothermal treatment, indicating early forming solids are different than later forming residues. A reliable mass- and energy-balanced global reaction network must include at least two autocatalytic reactions, either in parallel or series, and at least one must have an explicit initiation reaction having a low activation energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Previously unaccounted atmospheric mercury deposition in a midlatitude deciduous forest

Significance Direct measurements of atmospheric deposition of gaseous elemental mercury (GEM) over a temperate forest showed a pronounced annual deposition of 25.1 µg ⋅ m −2 , which dominated as a source of mercury. GEM deposition was five times greater than wet deposition and three times greater than litterfall deposition, which has been used as a proxy for GEM deposition until now. Measured GEM deposition is driven by combined plant GEM uptake and underlying forest floor GEM uptake. Global forests may be a much larger global GEM sink than currently assumed, which may explain high mercury levels in soils across forests. Forest mercury mobilizes via watershed runoff and bioaccumulates in aquatic biota, ultimately leading to mercury exposures in wildlife and humans.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗