Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTIMONIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Electrochemical, Structural and Surface Characterization of Nickel/Zirconia Solid Oxide Fuel Cell Anodes in Coal Gas Containing Antimony

The interaction of antimony with the nickel-zirconia solid oxide fuel cell (SOFC) anode has been investigated. Tests with both anode-supported and electrolyte-supported button cells were performed at 700 and 800oC in synthetic coal gas containing 10 ppb to 9 ppm antimony. Minor performance loss was observed immediately after Sb introduction to coal gas resulting in ca. 5 % power output drop. While no further degradation was observed during the following several hundred hours of testing, cells abruptly and irreversibly failed after 800-1500 hours depending on Sb concentration and test temperature. Antimony was found to interact strongly with nickel and result in extensive alteration phase formation, consistent with expectations based on thermodynamic properties. Nickel antimonide phases, NiSb and Ni5Sb2, were partially coalesced into large grains and eventually affected electronic percolation through the anode support. Initial degradation was attributed to diffusion of antimony to the active anode/electrolyte interface to form an adsorption layer.

01 COAL, LIGNITE, AND PEAT↗

Chemical route for formation of intermetallic Zn{sub 4}Sb{sub 3} phase

Synthesis of intermetallic zinc antimonide phases via low temperature solution route was investigated. Trial experiments were carried out under inert atmosphere at 70 deg. C using metallic Zn, SbCl{sub 3} and NaBH{sub 4} as reactants and tetrahydrofuran (THF), dimethylsulfoxide (DMSO) as organic media. Powder X-ray analysis confirmed the nucleation and growth of ZnSb phases in presence of excess Zn. SEM analysis revealed the existence of core-shell structure comprising of Zn core and Sb shell. Such particles get transformed into Zn{sub 4}Sb{sub 3} crystalline phases upon thermal treatment at 300 deg. C/6 h in a silica tube closed under high secondary vacuum. - Graphical abstract: TEM observation of the Zn{sub 4}Sb{sub 3} powder synthesized by soft chemistry.

36 MATERIALS SCIENCE↗

Ternary rare-earth bismuthides RE{sub 5}SiBi{sub 2} and RE{sub 5}GeBi{sub 2} (RE=La-Nd, Gd-Er): Stabilization of the {beta}-Yb{sub 5}Sb{sub 3}-type structure through tetrel substitution

Ternary bismuthides RE{sub 5}TtBi{sub 2} containing rare-earth (RE=La-Nd, Gd-Er) and tetrel (Tt=Si, Ge) atoms have been prepared by arc-melting of the elements followed by annealing at 800 {sup o}C. They adopt the {beta}-Yb{sub 5}Sb{sub 3}-type structure (Pearson symbol oP32, space group Pnma, Z=4), as revealed through analysis by single-crystal X-ray diffraction on Ce{sub 5}Si{sub 0.869(4)}Bi{sub 2.131(4)} and powder X-ray diffraction on Ce{sub 5}GeBi{sub 2}. Cell parameters for the entire series lie in the ranges of a=12.8-11.8 A, b=9.6-9.0 A, and c=8.4-7.9 A. Solid solubility in Ce{sub 5}Si{sub x}Bi{sub 3-x} and Pr{sub 5}Si{sub x}Bi{sub 3-x} (approximately 0.9{<=}x{<=}1.2, depending on the RE member) is much more limited compared to the antimonides, consistent with a highly ordered structure in which the two possible anion sites are essentially segregated into a smaller one occupied by Tt atoms (CN7) and a larger one occupied by Bi atoms (CN9). Band structure calculations on La{sub 5}SiBi{sub 2} confirm the importance of La-La bonding interactions near the Fermi level. X-ray photoelectron spectra support the presence of partially anionic Bi atoms, as indicated by a small negative binding energy shift relative to elemental Bi. The Ce and Pr members undergo magnetic transitions at low temperatures, possibly involving ferromagnetic interactions, that are strongly influenced by the nature of the Tt atom. -- Graphical Abstract: Tetrel (Si or Ge) and Bi atoms are arranged in an ordered manner in the {beta}-Yb{sub 5}Sb{sub 3}-type structure adopted by RE{sub 5}TtBi{sub 2}. Display Omitted

36 MATERIALS SCIENCE↗

A theoretical study of the bonding properties of R 4 Sb 3 compounds

Here, this study investigates the electronic structure and bonding properties of rare-earth antimonide compounds, specifically Yb 4 Sb 3 and La 4 Sb 3 , utilizing density functional theory calculations. The analysis reveals that Yb 4 Sb 3 exhibits a predominantly ionic character whereas La 4 Sb 3 displays a greater degree of covalent bonding. Moreover, the presence of divalent ytterbium leads to p-type conduction at high temperatures in Yb 4 Sb 3 . Conversely, La 4 Sb 3 displays n-type conduction because of a larger electronic transfer from the rare-earth metal towards antimony. These findings provide valuable insights into the structural and electronic properties that govern the performance of R 4 Sb 3 compounds, contributing to the development of advanced materials for thermoelectric energy conversion.

36 MATERIALS SCIENCE↗

Thin Film Synthesis of Semiconductors in the Mg–Sb–N Materials System

Nitrides feature many interesting properties, such as a wide range of bandgaps suitable for optoelectronic devices including light-emitting diodes (LEDs), and piezoelectric response used in microelectromechanical systems (MEMS). Nitrides are also significantly underexplored compared to oxides and other chemistries, with many being thermochemically metastable, sparking interest from a basic science point of view. This paper reports on experimental and computational exploration of the Mg-Sb-N material system, featuring both metastable materials and semiconducting properties. Using sputter deposition, we discovered a new Mg 2 SbN 3 nitride with a wurtzite-derived crystal structure, and synthesized the antimonide-nitride Mg 3 SbN with an antiperovskite crystal structure for the first time in thin film form. Theoretical calculations indicate that Mg 2 SbN 3 is metastable and has properties relevant to LEDs and MEMS, whereas Mg 3 SbN has a large dielectric constant (28ε o ) and low hole effective masses (0.9m o ), of interest for photovoltaic solar cell absorbers. The experimental solar-matched 1.3 eV optical absorption onset of the Mg 3 SbN antiperovskite agrees with the theoretical prediction (1.3 eV direct, 1.1 eV indirect), and with the measurements of room-temperature near-bandgap photoluminescence. Furthermore, these results make an important contribution towards understanding semiconductor properties and chemical trends in the Mg-Sb-N materials system, paving the way to future practical applications of these novel materials.

14 SOLAR ENERGY↗

Distributed feedback GaSb based laser diodes with buried grating

We report on the growth, fabrication, and experimental study of distributed feed-back antimonide diode lasers with buried grating. A second order index-coupled grating was defined by interferometric lithography on the top of the laser waveguide and dry etched by reactive ion etching. The grating was then buried thanks to an overgrowth of the top cladding layer using molecular beam epitaxy. The wafer was then processed using standard photolithography and wet etching into 15 μm-wide laser ridges. Single frequency laser emission at a wavelength of 2.2 μm was measured with a side mode suppression ratio of 34 dB, a maximum output power of 30 mW, and a total continuous tuning range of 6.5 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lattice thermal conductivity of filled skutterudites: An anharmonicity perspective

We report a phenomenological model to calculate the high-temperature lattice thermal conductivity of filled skutterudite antimonides. The model needs no phonon resonant scattering terms. Instead, we assume that umklapp processes dominate the high-temperature phonon scattering. In order to represent the anharmonicity introduced by the filling atom, we introduce a Gaussian term into the relaxation time of the umklapp process. The developed model agrees remarkably well with the experimental results of RE{sub f}Co{sub 4}Sb{sub 12} and RE{sub f}Fe{sub 4}Sb{sub 12} (RE = Yb, Ba, and Ca) alloys. To further test the validity of our model, we calculate the lattice thermal conductivity of nanostructured or multi-filled skutterudites. The calculation results are also in good agreement with experiment, increasing our confidence in the developed anharmonicity model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced emission from mid-infrared AlInSb light-emitting diodes with p-type contact grid geometry

We report on the impact of lateral current spreading on light emission from aluminium indium antimonide (AlInSb) mid-infrared p-i-n light-emitting diodes (LEDs) grown by molecular beam epitaxy on a GaAs substrate. Due to the high effective mass of holes in Al{sub x}In{sub 1−x}Sb, the resistivity of p-type material determines the 3-D distribution of current flow in the devices. This work shows that maximum light emission, as measured by electroluminescence, and 3-times wall-plug efficiency improvement were obtained at room temperature from devices with a p-type contact grid geometry with a spacing of twice the current spreading length in the p-type material, which was measured by spatially resolved photocurrent. The LED with the optimal contact geometry exhibits improved performance at high injection current levels thanks to the more uniform carrier distribution across the device area.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Real-time observation of coherent acoustic phonons generated by an acoustically mismatched optoacoustic transducer using x-ray diffraction

The spectrum of laser-generated acoustic phonons in indium antimonide coated with a thin nickel film has been studied using time-resolved x-ray diffraction. Strain pulses that can be considered to be built up from coherent phonons were generated in the nickel film by absorption of short laser pulses. Acoustic reflections at the Ni–InSb interface leads to interference that strongly modifies the resulting phonon spectrum. The study was performed with high momentum transfer resolution together with high time resolution. This was achieved by using a third-generation synchrotron radiation source that provided a high-brightness beam and an ultrafast x-ray streak camera to obtain a temporal resolution of 10 ps. We also carried out simulations, using commercial finite element software packages and on-line dynamic diffraction tools. Using these tools, it is possible to calculate the time-resolved x-ray reflectivity from these complicated strain shapes. The acoustic pulses have a peak strain amplitude close to 1%, and we investigated the possibility to use this device as an x-ray switch. At a bright source optimized for hard x-ray generation, the low reflectivity may be an acceptable trade-off to obtain a pulse duration that is more than an order of magnitude shorter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Resonant transducers for solid-state plasma density modulation

We have developed transducers capable of modulating the plasma density and plasma density gradients in indium antimonide. These transducers make use of piezoelectric drivers to excite acoustic pressure resonance at 3λ/2, generating large amplitude standing waves and plasma density modulations. The plasma density has been directly measured using a laser diagnostic. A layered media model shows good agreement with the experimental measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Interband absorption strength in long-wave infrared type-II superlattices with small and large superlattice periods compared to bulk materials

The absorption spectra for the antimonide-based type-II superlattices (SLs) for detection in the long-wave infrared (LWIR) are calculated and compared to the measured data for SLs and bulk materials with the same energy gap (HgCdTe and InAsSb). We include the results for the metamorphic InAsSb{sub x}/InAsSb{sub y} SLs with small periods as well as the more conventional strain-balanced InAs/Ga(In)Sb and InAs/InAsSb SLs on GaSb substrates. The absorption strength in small-period metamorphic SLs is similar to the bulk materials, while the SLs with an average lattice constant matched to GaSb have significantly lower absorption. This is because the electron-hole overlap in the strain-balanced type-II LWIR SLs occurs primarily in the hole well, which constitutes a relatively small fraction of the total thickness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis, crystal structure and physical properties of the solid solutions Ca 14– x RE x CdSb 11 ( RE = La–Nd, Sm, Gd–Yb, x ≈ 0.85±0.15)

This article presents new antimonides represented with the general formula Ca 14– x RE x CdSb 11 ( RE =La–Nd, Sm, Gd–Yb, x ≈ 0.85±0.15). The 12 studied compounds constitute a nearly complete series of rare-earth metal substituted variants of the ternary Ca 14 CdSb 11 phase. All have been synthesized from the respective elements, employing high-temperature reactions under molten flux conditions. The structures have been fully characterized by single-crystal X-ray diffraction methods. All materials crystallize in the tetragonal Ca 14 AlSb 11 structure type (space group I 4 1 / acd , No. 142, Z =8). Rare-earth element atoms randomly substitute Ca atoms on the four available crystallographic sites, with a noted preference for the Ca2 site in case of the light (La–Nd) rare-earth elements and the Ca1 site in case of the heavier (Sm, Gd–Yb) ones. The electronic structure calculations and resistivity measurements indicate title compounds as degenerated semiconductors. Magnetization measurements at varied temperature show Curie-Weiss paramagnetic behavior consistent with local-moment magnetism due to the 3+ ground state for the rare-earth metal ions. In the case of the Yb-containing sample, a mixed-valence Yb 2+/3+ state is apparent. Furthermore, the measured charge transport properties suggest small bandgap degenerate semiconductor-like behavior and suitability for thermoelectrics.

36 MATERIALS SCIENCE↗

Direct wafer bonding of highly conductive GaSb/GaInAs and GaSb/GaInP heterojunctions prepared by argon-beam surface activation

The authors present a low-temperature wafer bonding process for the formation of electrically conductive n-GaSb/n-Ga{sub 0.79}In{sub 0.21}As and n-GaSb/n-Ga{sub 0.32}In{sub 0.68}P heterojunctions. The surfaces are deoxidized by sputter-etching with an argon-beam and bonded in ultrahigh vacuum. The sputtering behavior was investigated for each material, revealing a distinct selective sputtering characteristic for Ga{sub 0.32}In{sub 0.68}P. According to these findings, the settings for the bonding process were chosen. The mechanical and electrical properties of the wafer bonds were studied. Fully bonded 2 in. wafer pairs were found for both material combinations exhibiting high bond energies, which are comparable to the binding energies in the semiconductors. Furthermore, bond resistances below 5 mΩ cm{sup 2} could be reached, which are in the range of the lowest resistances that have been reported for wafer bonded heterojunctions. This speaks, together with the high bond energies, for a high amount of covalent bonds at the interfaces. These promising bond characteristics make the integration of antimonides with arsenides or phosphides by wafer bonding attractive for various optoelectronic applications such as multijunction solar cells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of multicomponent InAsSbP matrix surface on formation of InSb quantum dots at MOVPE growth

Indium-antimonide quantum dots (7–9 × 10{sup 9} cm{sup 2}) are produced on an InAs(001) substrate by metal-organic vapor-phase epitaxy at a temperature of T = 440°C. Epitaxial deposition occurred simultaneously onto an InAs binary matrix and an InAsSbP quaternary alloy matrix layer lattice-matched to the InAs substrate in terms of the lattice parameter. Transformation of the quantum-dot shape and size is studied in relation to the chemical composition of the working matrix surface, onto which the quantum dots are deposited. The use of a multicomponent layer makes it possible to control the lattice parameter of the matrix and the strains produced in the system during the formation of self-assembled quantum dots.

36 MATERIALS SCIENCE↗

Local emission spectroscopy of surface micrograins in A{sup III}B{sup V} semiconductors

The density-of-states spectra and the parameters of levels of electron states in locally chosen surface micrograins of indium antimonide and arsenide and gallium arsenide are studied with a tunneling electron microscope in the field-emission mode of measurements. By correlating the current–voltage characteristics with the formula for the probability of emission via levels, the activation energies of the levels (ψ) and the lifetimes of electrons at the levels (τ) are determined. Two types of levels for electron localization are identified. These are levels in the micrograin bulk (ψ ≈ 0.75, 1.15, and 1.59 eV for n-InSb, n-InAs, and n-GaAs, respectively; τ ~ 10{sup –8}–10{sup –7} s) and in the surface region of an i-InSb micrograin (ψ ~ 0.73, 1.33, 1.85, 2.15, 5.1 eV; τ ≈ 5 × 10{sup –8}–3 × 10{sup –7} s). A physical model involving the Coulomb-interaction-induced localization of light electrons and their size quantization determined by the electron effective mass, energy, and concentration and by the surface curvature of the micrograin is proposed.

36 MATERIALS SCIENCE↗

First-principles calculations of the electronic and structural properties of GaSb

In this paper, we carried out first-principles calculations in order to investigate the structural and electronic properties of the binary compound gallium antimonide (GaSb). This theoretical study was carried out using the Density Functional Theory within the plane-wave pseudopotential method. The effects of exchange and correlation (XC) were treated using the functional Local Density Approximation (LDA), generalized gradient approximation (GGA): Perdew–Burke–Ernzerhof (PBE), Perdew-Burke-Ernzerhof revised for solids (PBEsol), Perdew-Wang91 (PW91), revised Perdew–Burke–Ernzerhof (rPBE), Armiento–Mattson 2005 (AM05) and meta-generalized gradient approximation (meta-GGA): Tao–Perdew–Staroverov–Scuseria (TPSS) and revised Tao–Perdew–Staroverov–Scuseria (RTPSS) and modified Becke-Johnson (MBJ). We calculated the densities of state (DOS) and band structure with different XC potentials identified and compared them with the theoretical and experimental results reported in the literature. It was discovered that functional: LDA, PBEsol, AM05 and RTPSS provide the best results to calculate the lattice parameters (a) and bulk modulus (B{sub 0}); while for the cohesive energy (E{sub coh}), functional: AM05, RTPSS and PW91 are closer to the values obtained experimentally. The MBJ, Rtpss and AM05 values found for the band gap energy is slightly underestimated with those values reported experimentally.

36 MATERIALS SCIENCE↗

Thermoelectric properties of InSb〈Zn〉 in nanoporous glass

Nanowire structures of zinc-doped indium antimonide are fabricated. These structures are formed in porous glass with characteristic pore sizes of ~7 nm. The temperature dependences of the electrical conductivity, Seebeck coefficient, and current–voltage characteristics are studied. An increase in the InSb Seebeck coefficient in porous glass in comparison with that of the bulk material is detected for the first time.

36 MATERIALS SCIENCE↗

Quasi-Classical Model of the Static Electrical Conductivity of Heavily Doped Degenerate Semiconductors at Low Temperatures

Germanium, silicon, gallium arsenide, and indium antimonide n-type crystals on the metal side of the insulator–metal transition (Mott transition) are considered. In the quasi-classical approximation, the static (direct current) electrical conductivity and the drift mobility of electrons of the c band, and electrostatic fluctuations of their potential energy and the mobility edge are calculated. It is considered that a single event of the elastic Coulomb scattering of a mobile electron occurs only in a spherical region of the crystal matrix with an impurity ion at the center. The results of calculations using the proposed formulas without using fitting parameters are numerically consistent with experimental data in a wide range of concentrations of hydrogenlike donors at their weak and moderate compensation by acceptors.

36 MATERIALS SCIENCE↗