Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANTENNA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Wideband radial line slot array antenna

An antenna includes a waveguide defined by a gap between a backplane with radial support ribs and a facesheet, a teardrop-shaped feed pin at a center of the backplane, and a foam spacer between the backplane and facesheet. An outward facing side of the facesheet includes thermal paint. The facesheet includes pairs of through-hole slots for releasing portions of a wave of radiation in the waveguide to generate a transmit-beam or to receive the receive-beam to generate the wave of radiation. The pairs may be disposed as a spiral array about a center of the facesheet. Each of the pairs may include first and second slots. A length of the second slot is oriented approximately perpendicular to a length of the first slot. Dispositions of the slots are set by a computer process. The dispositions optimize a trade-off between transmit and receive gains.

Bray, Matthew G.↗
DOE OSTI2019

Brain sensor and communication model using plasmonic microring antenna network

In this paper, the feasibility of using multi-plasmonic sensing probes embedded nanoring resonators within a microring resonator system for brain signal probing and the investigation proposed. The plasmonic sensor probes made of gold grating placed within the center nanorings, from which the sensor network of the coupling light from the multi-plasmonic probes to the main ring established. The coupling between light (photon) power and nano-gold grating generate the plasmonic polariton dipoles and propagate within the system. The whispering gallery mode generates at the center rings, which will couple into the sensor probes and the induced change in optical signals that can detect via the system ports. The coupling between the generated polaritons and external stimuli from the sub-brain cells will change the optical output signals, where the electro-optic signal conversion can be applied. In manipulation, the changes in the grating periods of the sensing probes will affect the changes in the output signals, which can distinguish by the sensing probe signal Bragg wavelengths. The optical filter applied at each of the device port to attenuate the output signal that can be applied for brain investigation. The simulation results have shown that the low output power can detect for sub-level investigation.

42 ENGINEERING↗
DOE OSTI2022

Tin removal by an annular surface wave plasma antenna in an extreme ultraviolet lithography source

Tin contamination of the collector mirror surface remains one of the crucial issues of EUV (Extreme Ultraviolet) sources, directly impacting the availability of the tool. Hydrogen plasma-based tin removal processes employ hydrogen radicals and ions to interact with tin deposits to form gaseous tin hydride (SnH 4 ), which can be removed through pumping. An annular surface wave plasma (SWP) source developed at the University of Illinois—Urbana Champaign is integrated into the cone and perimeter of the collection mirror for in situ tin removal. The SWP is characterized by high ion and radical densities, low electron temperature, and local generation where etching is needed. This method has the potential to significantly reduce downtime and increase mirror lifetime. Radical probe measurements show hydrogen radical densities in the order of 10 19 m -3 , while Langmuir probe measurements show electron temperatures of up to 6 eV and plasma densities on the order of 10 17–18 m -3 . The generated ions are essential to the tin cleaning and have sufficiently low energy to cause no damage to the collector capping layer. Tin etch rates of up to 270 nm/min were observed in a variety of experimental conditions, including various powers, pressures, flowrates, and temperatures. In conclusion, the high etch rates demonstrated in this study exceed the expected contamination rate of the EUV source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Infrared Light-Emitting Devices from Antenna-Coupled Luttinger Liquid Plasmons In Carbon Nanotubes

Electrically driven light-emitting devices provide highly energy-efficient lighting at visible wavelengths, and they have transformed photonic and electronic lighting applications. Efficient infrared light-emitting devices, however, have been challenging because band gap emission from semiconductors becomes inefficient in the mid-infrared to far-infrared spectral range. Here, in this paper, we investigate infrared light-emitting devices (IRLEDs) based on Luttinger liquid (LL) plasmons in one-dimensional (1D) metallic carbon nanotubes. Elementary excitations in LL are characterized by collective charge and spin excitations, i.e., plasmons and spinons. Consequently, electrons injected into the nanotubes transform efficiently into LL plasmons, a hybrid excitation of electromagnetic fields and electrons. We design nanoantennas coupled to the carbon nanotube to radiate LL plasmons into the far field. LL-based IRLEDs can be designed to selectively emit at wavelengths across the far- and mid-infrared spectra. An electrical-to-optical power conversion efficiency up to 3.2% may be achieved. Such efficient and narrowband LL-based IRLEDs can enable novel infrared nanophotonic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Response to Comment on “Radiation-Belt Remediation Using Space-Based Antennas and Electron Beams” by G. Ganguli and C. Crabtree

Ganguli and Crabtree have written a comment about a recent article by the authors listed above on radiation-belt remediation. They have objected to our evaluation of the Naval Research Laboratory’s chemical release concept which states that this concept may be impractical due to an apparently low overall efficiency. In their comment, they provide a scientific argument and refer to the published literature to counter our statement. Here, in this response, we provide more details on our numerical calculations and experimental results which led to this evaluation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Redox Regulation of a Light-Harvesting Antenna Complex in an Anoxygenic Phototroph

ABSTRACT The purple nonsulfur bacterium Rhodopseudomonas palustris is a model for understanding how a phototrophic organism adapts to changes in light intensity because it produces different light-harvesting (LH) complexes under high light (LH2) and low light intensities (LH3 and LH4). Outside of this change in the composition of the photosystem, little is understood about how R. palustris senses and responds to low light intensity. On the basis of the results of transcription analysis of 17 R. palustris strains grown in low light, we found that R. palustris strains downregulate many genes involved in iron transport and homeostasis. The only operon upregulated in the majority of R. palustris exposed to low light intensity was pucBAd , which encodes LH4. In previous work, pucBAd expression was shown to be modulated in response to light quality by bacteriophytochromes that are part of a low-light signal transduction system. Here we found that this signal transduction system also includes a redox-sensitive protein, LhfE, and that its redox sensitivity is required for LH4 synthesis in response to low light. Our results suggest that R. palustris upregulates its LH4 system when the cellular redox state is relatively oxidized. Consistent with this, we found that LH4 synthesis was upregulated under high light intensity when R. palustris was grown semiaerobically or under nitrogen-fixing conditions. Thus, changes in the LH4 system in R. palustris are not dependent on light intensity per se but rather on cellular redox changes that occur as a consequence of changes in light intensity. IMPORTANCE An essential aspect of the physiology of phototrophic bacteria is their ability to adjust the amount and composition of their light-harvesting apparatus in response to changing environmental conditions. The phototrophic purple bacterium R. palustris adapts its photosystem to a range of light intensities by altering the amount and composition of its peripheral LH complexes. Here we found that R. palustris regulates its LH4 complex in response to the cellular redox state rather than in response to light intensity per se . Relatively oxidizing conditions, including low light, semiaerobic growth, and growth under nitrogen-fixing conditions, all stimulated a signal transduction system to activate LH4 expression. By understanding how LH composition is regulated in R. palustris , we will gain insight into how and why a photosynthetic organism senses and adapts its photosystem to multiple environmental cues.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Synthesis and Photophysical Properties of Light-Harvesting Gold Nanoclusters Fully Functionalized with Antenna Chromophores

The development of efficient light-harvesting systems is important to understand the key aspects of solar-energy conversion processes and to utilize them in various photonic applications. In this study, atomically well-defined gold nanoclusters are reported as a new platform to fabricate artificial light-harvesting systems. An efficient amide coupling method is developed to synthesize water-soluble Au 22 clusters fully protected with pyrene chromophores by taking advantage of their facile phase-transfer reaction. The synthesized Au 22 clusters with densely packed 18 pyrene chromophores (Au 22 –PyB 18 ) exhibit triple-emission in blue, green, and red wavelength regions arising respectively from pyrene monomer, pyrene excimer, and Au 22 emission, producing bright white light emission together. The photoluminescence of Au 22 is enhanced by more than tenfold, demonstrating that pyrenes at the periphery efficiently channel the absorbed energy to the luminescent Au 22 at the center. A combination of femtosecond transient absorption and anisotropy measurements of Au 22 –PyB 18 explicitly reveals three main decay components of 220 fs, 3.5 ps, and 160 ps that can be assigned to energy migration between pyrenes and energy transfer processes from pyrene monomer and excimer to the central Au 22 , respectively.

14 SOLAR ENERGY↗
DOE OSTI2020

Particle Response of Antenna-Coupled TES Arrays: Results from SPIDER and the Laboratory

Future mm-wave and sub-mm space missions will employ large arrays of multiplexed transition-edge-sensor (TES) bolometers. Such instruments must contend with the high flux of cosmic rays beyond our atmosphere that induce ‘glitches’ in bolometer data, which posed a challenge to data analysis from the Planck bolometers. Future instruments will face the additional challenges of shared substrate wafers and multiplexed readout wiring. Here, we explore the susceptibility of modern TES arrays to the cosmic ray environment of space using two data sets: the 2015 long-duration balloon flight of the SPIDER cosmic microwave background polarimeter, and a laboratory exposure of SPIDER flight hardware to radioactive sources. We find manageable glitch rates and short glitch durations, leading to minimal effect on SPIDER analysis. We constrain energy propagation within the substrate through a study of multi-detector coincidences and give a preliminary look at pulse shapes in laboratory data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Recent Developments of Commercially Fabricated Horn Antenna-Coupled Transition-Edge Sensor Bolometer Detectors for Next-Generation Cosmic Microwave Background Polarimetry Experiments

Here we report on the successful fabrication of orthomode transducer-coupled transition-edge sensor (TES) bolometer arrays for cosmic microwave background (CMB) polarimetry experiments with the superconductor electronics fabrication facility at SEEQC Inc. Commercial microfabrication foundry could provide increase in detector fabrication throughput for a next-generation CMB experiment, CMB-S4, that would deploy approximately one order of magnitude more detectors than current CMB experiments. We also developed TES bolometers with two TESs in series that have two different superconducting temperatures (Tc) using a superconducting proximity effect between niobium (Nb) and aluminum-manganese (AlMn) alloy. We will discuss the motivation, design considerations, fabrication processes, test results, and how industrial detector fabrication could be a path to fabricate hundreds of detector wafers for future CMB polarimetry experiments and other experiments that require TESs and superconducting RF circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Structure of the antenna complex expressed during far-red light photoacclimation in Synechococcus sp. PCC 7335

Far-red light photoacclimation, or FaRLiP, is a facultative response exhibited by some cyanobacteria that allows them to absorb and utilize lower energy light (700–800 nm) than the wavelengths typically used for oxygenic photosynthesis (400–700 nm). During this process, three essential components of the photosynthetic apparatus are altered: photosystem I, photosystem II, and the phycobilisome. In all three cases, at least some of the chromophores found in these pigment–protein complexes are replaced by chromophores that have red-shifted absorbance relative to the analogous complexes produced in visible light. Recent structural and spectroscopic studies have elucidated important features of the two photosystems when altered to absorb and utilize far-red light, but much less is understood about the modified phycobiliproteins made during FaRLiP. We used single-particle, cryo-EM to determine the molecular structure of a phycobiliprotein core complex comprising allophycocyanin variants that absorb far-red light during FaRLiP in the marine cyanobacterium Synechococcus sp. PCC 7335. The structure reveals the arrangement of the numerous red-shifted allophycocyanin variants and the probable locations of the chromophores that serve as the terminal emitters in this complex. It also suggests how energy is transferred to the photosystem II complexes produced during FaRLiP. The structure additionally allows comparisons with other previously studied allophycocyanins to gain insights into how phycocyanobilin chromophores can be tuned to absorb far-red light. These studies provide new insights into how far-red light is harvested and utilized during FaRLiP, a widespread cyanobacterial photoacclimation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗