Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMORPHOUS STATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Investigation of metallic and metallic glass hollow spheres for fusion target application

The first successful formation of submillimeter and millimeter spherical shells of tin and of a gold-lead-antimony alloy by means of the hollow-jet instability technique developed by Kendall is reported. Examination of tin specimens by SEM reveals that surface quality varies from poor to excellent. Whereas the metal is employed only as a convenient and inexpensive material, the gold alloy is important in that it is hard, has a high atomic number, and may be solidified into the amorphous state through the provision of a modest cooling rate. AuPbSb spherules up to 1.5 mm in diameter are produced using LN2 or chilled methanol as a coolant. It is found that these amorphous samples possess a superb surface smoothness compatible with fusion target requirements. It is noted that hollow spheres currently made of this alloy have an average outside diameter of 2000 microns.

Lee, M. C.↗

Dione’s Wispy Terrain: A Cryovolcanic Story?

We examine the H2O ice phase on the surface of Dione, one of Saturn's icy satellites, to investigate whether it might harbor cryovolcanic activity induced by a subcrustal body of water. Several studies have searched for such a signature, as summarized in Buratti et al.; however, none has yet produced sufficient evidence to dissipate doubts. In the radiation environment characteristic of Saturn's icy moons, the presence of crystalline H2O ice has been used as a marker of a high-temperature region. Because ion bombardment will, over time, drive crystalline ice toward an increasingly amorphous state, the current phase of the H2O ice can be used to gauge the temporal temperature evolution of the surface. We adopt a technique described by Dalle Ore et al. to map the fraction of amorphous to crystalline H2O ice on Dione's surface, observed by the Cassini Visible and Infrared Mapping Spectrometer, and provide an ice exposure age. We focus on a region observed at high spatial resolution and centered on one of the faults of the Wispy Terrain, which is measured to be fully crystalline. By assuming an amorphous to crystalline ice fraction of 5% (i.e., 95% crystallinity), significantly higher than the actual measurement, we obtain an upper limit for the age of the fault of 152 Ma. This implies that the studied fault has been active in the last ~100 Ma, supporting the hypothesis that Dione might still be active or was active a very short time ago, and similarly to Enceladus, might still be harboring a body of liquid water under its crust.

Saturnian satellites↗

Tunable Crosslinked Ether Polymer Network Electrolytes for High‐Performance All‐Solid‐State Sodium Batteries

All-solid-state batteries (ASSBs) are critical for achieving high energy density and enhanced safety. Solid polymer electrolytes (SPEs) offer key advantages over other electrolytes, including improved safety, flexibility, and interfacial contact. Among the SPEs, ether-based polymers are widely studied due to their ease of processing and high ionic conductivity (σi) in the amorphous state. In this work, the introduction of poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) into an SPE matrix composed of poly(ethylene glycol) diacrylate (PEGDA), poly(ethylene glycol) (PEG2k), and sodium bis(fluorosulfonyl)imide (NaFSI) salt is investigated to facilitate the formation of amorphous, high σ i SPEs through end-group engineering and polymer ratio optimization. PEGMEMA enhances structural integrity via crosslinking with PEGDA through its methacrylate group, while its methyl end group aids ion conduction. A 2:1:7 ratio of PEGDA:PEGMEMA:PEG2k exhibits a σi of 1.16 x 10 -4 S cm -1 and oxidative stability up to 4.4 V at 60 °C. A solid-state cell incorporating this SPE, a Na 2/3 Ni 1/3 Mn 2/3 O 2 (NM12) cathode, and a sodium-metal anode demonstrates excellent cycling stability, retaining over 80 % of its initial capacity for 150 cycles at 60 °C. The findings highlight the potential of end-group engineering in improving the electrochemical performance of SPEs.

25 ENERGY STORAGE↗

Rational design of stealthy hyperuniform two-phase media with tunable order

Disordered stealthy hyperuniform materials are exotic amorphous states of matter that have attracted recent attention because of their novel structural characteristics (hidden order at large length scales) and physical properties, including desirable photonic and transport properties. It is therefore useful to devise algorithms that enable one to design a wide class of such amorphous configurations at will. In this paper, we present several algorithms enabling the systematic identification and generation of discrete (digitized) stealthy hyperuniform patterns with a tunable degree of order, paving the way towards the rational design of disordered materials endowed with novel thermodynamic and physical properties. To quantify the degree of order or disorder of the stealthy systems, we utilize the discrete version of the $\tau$ order metric, which accounts for the underlying spatial correlations that exist across all relevant length scales in a given digitized two-phase (or, equivalently, a two-spin state) system of interest. In this work, our results impinge on a myriad of fields, ranging from physics, materials science and engineering, visual perception, and information theory to modern data science.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An energetic link between order and strength in metals: A nanocrystalline strength limit in high-entropy alloys and intermetallic compounds

The metallurgy and materials communities have long understood and exploited fundamental links between chemical and structural ordering in metallic solids to tailor their mechanical properties. We extend these ideas to include prediction of the nanocrystalline strength limit in high-entropy alloys and intermetallic compounds, where a breakdown occurs in the classical Hall-Petch strengthening behavior. The highest reported strength achievable through alloying has rapidly climbed and given rise to new classifications of materials with extraordinary properties, with a notable case being nanocrystalline metals. High-entropy alloys (chemically disordered, concentrated solid solutions) and intermetallic compounds are two boundary cases of how tailored order can be used to manipulate mechanical behavior. Here, we show that the complex electronic-structure mechanisms governing the peak strength of alloys and pure metals can be reduced to a few physically meaningful parameters based on their atomic arrangements and used – with no fitting parameters – to predict the maximum strength of these materials. This includes a generalized energy-based accounting for the degree of structural and chemical ordering that allows for rapid and reasonably accurate prediction of peak strength (validated in the nanocrystalline limit) as a function of temperature. Predictions of maximum strength based on the activation energy (with all materials properties derived from DFT calculations or experiments) for a stress-driven transition to an amorphous state is shown to accurately describe the breakdown in Hall-Petch behavior at the smallest crystallite sizes for pure metals, intermetallic compounds, high-entropy alloys, and metallic glasses. Further, this activation energy is also shown to be directly proportional to interstitial electronic charge density, which is a good predictor of ductility, stiffness (moduli), and phase stability in high-entropy alloys and solid metals generally. The proposed framework suggests the possibility of coupling ordering and intrinsic strength to mechanisms like dislocation nucleation, hydrogen embrittlement, and transport properties, such as through correlations between the activation energies for amorphization with stacking-fault and grain boundary energies. It additionally opens the prospect for greatly accelerated structural materials design and development to address materials challenges limiting more sustainable and efficient use of energy.

36 MATERIALS SCIENCE↗

Order-disorder in room-temperature ionic liquids probed via methyl quantum tunneling

Room-temperature ionic liquids are promising candidates for applications ranging from electrolytes for energy storage devices to lubricants for food and cellulose processing to compounds for pharmaceutics, biotransformation, and biopreservation. Due to the ion complexity, many room-temperature ionic liquids readily form amorphous phases upon cooling, even at modest rates. Here, we investigate two commonly studied imidazolium-based room-temperature ionic liquids, 1-ethyl-3-methylimidazolium tetrafluoroborate and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, as well as their mixtures, to demonstrate how the complex interplay between the crystalline and amorphous phases is affected by the processing conditions, such as thermal history, liquid mixing, and applied pressure. We show that quantum tunneling in the cation methyl groups, measured by high-resolution inelastic neutron scattering, can be used to probe the order-disorder in room-temperature ionic liquids (crystalline vs amorphous state) that develops as a result of variable processing conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Control of Y₂O₃ phase and its nanostructure formation through a very high energy mechanical milling

The formation behavior of Y₂O₃ ceramic particles was studied by employing a very high energy ball milling (milling energy: ~165 kJ/g·hit, milling speed: 1000 rpm). Both the XRD and HRTEM studies revealed that the high impact strain energy generated during the milling caused a drastic phase transition from the original C-type cubic (space group Ia3, a=10.58 Å) to the metastable B-type monoclinic (space group C2/m, a=13.89 Å), finally followed by a partial solid-state amorphization. The cubic phase was difficult to be reduced down to smaller than 10 nm, while the monoclinic phase was stabilized at sizes smaller than 10 nm with a mean crystallite size of 7.57 nm. Consequently, the existence of Y₂O₃ at a nanoscale smaller than 10 nm is possible by forming metastable monoclinic crystals, which are strain-induced. - Graphical abstract: The fig shows the solid-state phase formation of Y₂O₃ by very high energy input into the particles during milling: ordered body-centered cubic phase (space group Ia3, a=10.58 Å) nanocrystalline monoclinic phase (space group C2/m, a=13.89 Å) disordered monoclinic phase partial amorphous phase. The formation of Y₂O₃ smaller than 10 nm was strongly dependent on whether the phase transition from cubic to monoclinic occurred. Highlights: • This paper analyses very high energy milling behavior of coarse Y₂O₃ particles. • A drastic phase transition from cubic to monoclinic occurred with a partial amorphization. • An existence of Y₂O₃ smaller than 10 nm is possible by forming strain-induced monoclinic crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amorphous iron–chromium oxide nanoparticles with long-term stability

Highlights: • Fe–Cr oxide nanoparticles with pre-established metals ratio were obtained. • The amorphous state and its long-term stability were highlighted by X-ray diffraction. • The average diameter of dried nanoparticles was 3.5 nm, as was estimated by TEM, AFM. • In hexane dispersion, nanoparticles with diameter in the range 2.33–4.85 nm were found. • Superparamagnetic state of NPs co-exists with diamagnetism of the organic layer. - Abstract: Iron–chromium nanoparticles (NPs) were obtained through the thermal decomposition of μ{sub 3}-oxo heterotrinuclear (FeCr{sub 2}O) acetate in the presence of sunflower oil and dodecylamine (DA) as surfactants. The average diameter of the NPs was 3.5 nm, as estimated on the basis of transmission electron microscopy and atomic force microscopy images. Both techniques revealed the formation of roughly approximated spheres with some irregularities and agglomerations in larger spherical assemblies of 50–100 nm. In hexane, NPs with diameters in the 2.33–4.85 nm range are individually dispersed, as emphasized by dynamic light scattering measurements. The amorphous nature of the product was emphasized by X-ray powder diffraction. The study of the magnetic properties shows the presence of superparamagnetic state of iron–chromium oxide NPs and the diamagnetic contribution from DA layer forming a shell of NPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic-Layer-Deposited Aluminum Oxide Thin Films Probed with X-ray Scattering and Compared to Molecular Dynamics and Density Functional Theory Models

A better understanding of amorphous aluminum oxide’s structure and electronic properties is obtained through combined experimental and computational approaches. Grazing incidence X-ray scattering measurements were carried out on aluminum oxide thin films grown using thermal atomic layer deposition. The corresponding pair distribution functions (PDFs) showed structures similar to previously reported PDFs of solid-state amorphous alumina and molten alumina. Structural models based on crystalline alumina polymorphs (PDFgui) and amorphous alumina (molecular dynamics, MD) were examined for structural comparisons to the experimental PDF data. Smaller MD models were optimized and verified against larger models to allow for quantum chemical electronic structure calculations. The electronic structure of the amorphous alumina models yields additional insight into the band structure and electronic defects present in amorphous alumina that are not present in crystalline samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Pressure Investigation of 2,4,6-Trinitro-3-bromoanisole (TNBA): Structural Determination and Piezochromism

Understanding phase transitions in energetic materials is crucial for developing predictive models of detonation. 2,4,6-Trinitro-3-bromoanisole (TNBA), an energetic material, was studied in its single-crystal form up to pressures of 45 GPa in a diamond anvil cell. The material was characterized by using X-ray, Raman, and optical transmission measurements. From single-crystal X-ray diffraction, the ambient structure of TNBA was determined which crystallizes in the P2 1 /c space group having four molecular units per unit cell. The X-ray data up to 9.2 GPa were fitted to a third-order Birch–Murnaghan equation of state by using the parameters K o = 13.2(2.4) GPa and K p = 5.1(1.4). Between 6.8 and 7.3 GPa, a phase transition was inferred in TNBA from concurrent fading of X-ray diffraction, disappearance of Raman peaks, increase in sample fluorescence, and discontinuous color change. The new phase was consistent with an amorphous state of at least partially intact molecules judging from the presence of higher-order Raman modes and irreversibility of the Raman spectra upon release. Piezochromism was observed with the translucent yellow TNBA gradually darkening and becoming opaque black at ~25 GPa. This correlated to the absorption edge gradually shifting to the red in the visible spectrum. Signs of two possible additional structural transitions were detected in the 32.4–41.0 GPa range as suggested by a jump in the absorption edge, the irreversible changes in the absorption spectrum upon release to ambient pressure, and by the lack of Raman modes in recovered samples. Here, the crystal and electronic structures of TNBA were also investigated up to 10 GPa by using DFT calculations and crystal structure prediction (CSP) simulations. In agreement with the experimentally observed transition at 7 GPa, the simulations at 10 GPa found a bevy of polymorphs lower in enthalpy and higher in density than P2 1 /c. The lowest calculated enthalpy structure was determined to be P2 1 2 1 2 1 , being in a different space group than the ambient experimental result.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallization-assisted water adsorption in amorphous molecular adsorbents

Efficient and stable water adsorbents are essential for removing moisture from natural gas and olefins during their production. Industrial desiccants such as alumina and zeolites require high regeneration temperatures, while metal-organic frameworks often suffer from limited long-term stability and reusability. Here, we introduce a new type of molecular desiccants (M-PyC) that, in principle, can be reused indefinitely. These simple molecular coordination complexes undergo fully reversible phase transitions between crystalline and amorphous states through the decoordination (bond breaking) and recoordination (bond reforming) of water molecules. They exhibit high water uptake (30 wt%) and superb selectivity, excluding hydrocarbons entirely. Their effectiveness for dehydration, combined with low regeneration temperature, fast desorption kinetics, low-cost and green synthesis, easy scalability to kilogram quantities, and essentially unlimited recyclability, makes them truly competitive dehydration agents for industrial separations. The use of amorphous molecular adsorbents, where crystallinity and porosity are no longer stringent requirements, and the adsorption-desorption process entirely under ambient air, offers a conceptually different approach to adsorption-based separation science and potentially realistic solution to the long-standing challenge of sustained stability in coordinate-bonded adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of structure and composition on the electronic excitation induced amorphization of La2Ti2−xZrxO7 ceramics

Abstract Understanding the response of ceramics operating in extreme environments is of interest for a variety of applications. Ab initio molecular dynamic simulations have been used to investigate the effect of structure and B -site (=Ti, Zr) cation composition of lanthanum-based oxides (La 2 B 2 O 7 ) on electronic-excitation-induced amorphization. We find that the amorphous transition in monoclinic layered perovskite La 2 Ti 2 O 7 occurs for a lower degree of electronic excitation than for cubic pyrochlore La 2 Zr 2 O 7 . While in each case the formation of O 2 -like molecules drives the structure to an amorphous state, an analysis of the polyhedral connection network reveals that the rotation of TiO 6 octahedra in the monoclinic phase can promote such molecule formation, while such octahedral rotation is not possible in the cubic phase. However, once the symmetry of the cubic structure is broken by substituting Ti for Zr, it becomes less resistant to amorphization. A compound made of 50% Ti and 50% Zr (La 2 TiZrO 7 ) is found to be more resistant in the monoclinic than in the cubic phase, which may be related to the lower bandgap of the cubic phase. These results illustrate the complex interplay of structure and composition that give rise to the radiation resistance of these important functional materials.

36 MATERIALS SCIENCE↗

Equation of state and strain-induced stabilization of δ-phase stabilized plutonium alloys

An in-situ high-pressure neutron diffraction experiment was conducted on a δ-phase stabilized plutonium alloy with isotope 242 Pu. Upon room-temperature compression, neither of the previously reported pressure-induced transformation paths, δ → α' or δ → γ’ → α', was observed up to 1.2 GPa. Instead, a drastic reduction in the diffraction intensity of the δ phase was observed when the pressure was above 0.8 GPa. At the highest pressure of the experiment (1.2 GPa), the diffraction data appear to be characteristic of an amorphous state, manifested by the diminishing intensities of all diffraction lines. Additionally, no evidence was found to support the transformation to a body-centered tetragonal structure (δ’), which was previously inferred from the diffraction line broadening during initial compression to 0.1 GPa. The discrepancies between the present and previous experiments suggest a substantial strain-induced stabilization of the δ-phase and is presumably attributed to the different stress states in the high-pressure environments. From the pressure - volume measurements, the determined isothermal bulk modulus for the δ-phase is in the range of 31.9 ± 1.3–34.8 ± 1.8 GPa using different pressure scales, comparable to those obtained from the resonant ultrasound spectroscopy measurements of the alloys of similar composition. Finally, the pressure-induced elastic softening is neither convinced in the present work, nor can it be resolved from the diffraction experiments if it is intrinsically weak.

36 MATERIALS SCIENCE↗

Structural evolution and atomic dynamics in Ni–Nb metallic glasses: A molecular dynamics study

In this work, the composition and temperature dependence of static and dynamic structures in Ni x Nb 1– x ( x = 50–70 at. %) were systematically studied using molecular dynamics with a new-released semi-empirical embedded atom method potential by Mendelev. The calculated pair correlation functions and the structure factor match well with the experimental data, demonstrating the reliability of the potential within relatively wide composition and temperature ranges. The local atomic structures were then characterized by bond angle distributions and Voronoi tessellation methods, demonstrating that the icosahedral $\langle$0,0,12,0$\rangle$ is only a small fraction in the liquid state but increases significantly during cooling and becomes dominant at 300 K. The most abundant clusters are identified as $\langle$0,0,12,0$\rangle$ and distorted icosahedron$\langle$0,2,8,2$\rangle$. The large fraction of these two clusters hints that the relatively good glass forming ability is near the eutectic point. Unlike Cu–Zr alloys, both the self-diffusion coefficient and shear viscosity are insensitive to compositions upon cooling in Ni–Nb alloys. The breakdown of the Stokes-Einstein relation happens at around 1.6 T g ( T g : glass transition temperature). In the amorphous state, the solid and liquid-like atoms can be distinguished based on the Debye-Waller factor $\langle$ u 2 $\rangle$. The insensitivity of the dynamic properties of Ni–Nb alloys to compositions may result from the relatively simple solidification process in the phase diagram, in which only one eutectic point exists in the studied composition range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Melts of CrCoNi-based high-entropy alloys: Atomic diffusion and electronic/atomic structure from ab initio simulation

High-entropy alloys (HEAs) are an emerging class of advanced structural alloys under extensive research; yet, the properties of the liquid states of these materials, which are relevant to their processing, have been far less explored. In this work, we utilize ab initio molecular dynamics simulations to investigate the melt properties of a representative HEA—the Cantor alloy—and its derivatives: CrMnFeCoNi, CrFeCoNi, and CrCoNi. The atomic dynamics of these melts at various temperatures are investigated, specifically to analyze their electronic and atomic structures, including charge transfer, pair distribution functions, and short-range order. Results are compared with existing information for the liquids of metallic glasses, which also typically contain multiple principal elements, but retain the amorphous state under moderate to fast cooling rates. The present results provide insights into the structural and bonding factors favoring solidification to single-phase solid solutions in HEAs.

36 MATERIALS SCIENCE↗

Solid-state graphene formation via a nickel carbide intermediate phase [Nickel carbide (Ni 3 C) as an intermediate phase for graphene formation]

Direct formation of graphene with controlled number of graphitic layers on dielectric surfaces is highly desired for practical applications. Despite significant progress achieved in understanding the formation of graphene on metallic surfaces through chemical vapor deposition (CVD) of hydrocarbons, very limited research is available elucidating the graphene formation process via rapid thermal processing (RTP) of solid-state amorphous carbon, through which graphene is formed directly on dielectric surfaces accompanied by autonomous nickel evaporation. It is suggested that a metastable hexagonal nickel carbide (Ni 3 C) intermediate phase plays a critical role in transforming amorphous carbon to 2D crystalline graphene and contributing to the autonomous Ni evaporation. Temperature resolved carbon and nickel evolution in the RTP process is investigated using Auger electron spectroscopic (AES) depth profiling and glancing-angle X-ray diffraction (GAXRD). Formation, migration and decomposition of the hexagonal Ni 3 C are confirmed to be responsible for the formation of graphene and the evaporation of Ni at 1100 °C. The Ni 3 C-assisted graphene formation mechanism expands the understanding of Ni-catalyzed graphene formation, and provides insightful guidance for controlled growth of graphene through the solid-state transformation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

XRD technique: a way to discriminate structural changes in iron-based amorphous materials [An Alternative Method of Synthesizing Iron-based Amorphous Alloys]

Prevention of corrosion is a vital goal for the Department of Defense when billions of dollars are spent every year. Corrosion resistant materials have applications in all sort of military vehicles, and more importantly in naval vessels and submarines which come in contact with the seawater. It is known that corrosion resistance property can be improved by the used of structurally designed materials in the amorphous state where the atoms are arranged in a non-periodic fashion and specific atoms, tailored to the required properties can be interjected into the matrix for specific application. The XRD techniques reported here is to demonstrate the optimal conditions for characterization of these materials. The samples, which normally contain different compositions of Fe, Cr, B, Mo, Y, Mn, Si and W, are in the form of powders, ribbons and coatings. These results will be compared for the different forms of the sample which appears to correlate to the cooling rate during sample processing. In most cases, the materials are amorphous or amorphous with very small amount of crystallinity. In the ribbon samples for different compositions we observed that the materials are essentially amorphous. In most cases, starting from an amorphous powder sample, the coatings are also observed to be amorphous with a small amount of iron oxide on the surface, probably due to exposure to air.

36 MATERIALS SCIENCE↗

The effect of annealing on optical transmittance and structure of ZLANI fluorozirconate glass thin films

In this work, we report the effect of thermal annealing on structure, composition, optical transmittance and thickness of a novel fluorozirconate glass (ZLANI) containing Zr, La, Al, Na and In fluorides. In this work, pulsed laser depo- sition was used to grow thin films of ZLANI, and thermal annealing at different temperatures was performed on the films. Annealing did not change the composition, but a clear structural evolution of the ZLANI glass was observed by transmission electron microscopy (TEM), showing that we can control microstructure independent of composition. An increase in transmittance after the film was subject to a 100 °C thermal anneal was ascribed to the removal of defects and structural relaxation in the amorphous state. Following an anneal of 200 °C, the transmittance decreases due to heterogeneous formation of crystalline nuclei and changes in the local bonding. After the final annealing at 300 °C, a wider-scale crystallization occurred, with some major crystal phases formed as Zr 2 F 8 (H 2 O) 6 and ZrO 2 , which alters the shape of the transmittance curve. The crystalline content of the crystal phases that form in the annealed films was quantified using hollow cone dark field TEM imaging. The 100 °C or 200 °C annealing decreases the film thickness by inducing structural relaxation and densification of the amorphous films, while the thickness increase of the 300 °C annealed film resulted from the formed large crystals. These results provide insights for the design of multilayer nanocomposites with a ZLANI glass matrix, which have potential applications as up-/down-conversion luminescent materials and X-ray storage phosphors.

36 MATERIALS SCIENCE↗