Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

Gas Atomization of Stainless Steel - Slow Motion

Stainless steel liquid atomized by supersonic argon gas into a spray of droplets at ~1800ºC. Atomization of metal requires high pressure gas and specialized chambers for cooling and collecting the powders without contamination. The critical step for morphological control is the impingement of the gas on the melt stream. The video is a black and white high speed video of a liquid metal stream being atomized by high pressure gas. This material was atomized at the Ames Laboratory's Materials Preparation Center http://www.mpc.ameslab.gov

36 MATERIALS SCIENCE↗

Wind Turbines Benefit Crops

Ames Laboratory associate scientist Gene Takle talks about research into the effect of wind turbines on nearby crops. Preliminary results show the turbines may have a positive effect by cooling and drying the crops and assisting with carbon dioxide uptake.

17 WIND ENERGY↗

Metal Atomization (Materials Preparation Center)

The following video is a slow motion capture of an atomization event. Atomization of metal requires high pressure gas and specialized chambers for cooling and collecting the powders without contamination. The critical step for morphological control is the impingement of the gas on the melt stream. This material was cast at the Ames Laboratorys Materials Preparation Center http://www.mpc.ameslab.gov

36 MATERIALS SCIENCE↗

Atomization of metal (Materials Preparation Center)

Atomization of metal requires high pressure gas and specialized chambers for cooling and collecting the powders without contamination. The critical step for morphological control is the impingement of the gas on the melt stream. The video is a color video of a liquid metal stream being atomized by high pressure gas. This material was cast at the Ames Laboratory's Materials Preparation Center http://www.mpc.ameslab.gov WARNING - AUDIO IS LOUD.

36 MATERIALS SCIENCE↗

Stagnation Region Heat Transfer Augmentation at Very High Turbulence Levels

A database for stagnation region heat transfer has been extended to include heat transfer measurements acquired downstream from a new high intensity turbulence generator. This work was motivated by gas turbine industry heat transfer designers who deal with heat transfer environments with increasing Reynolds numbers and very high turbulence levels. The new mock aero-combustor turbulence generator produces turbulence levels which average 17.4%, which is 37% higher than the older turbulence generator. The increased level of turbulence is caused by the reduced contraction ratio from the liner to the exit. Heat transfer measurements were acquired on two large cylindrical leading edge test surfaces having a four to one range in leading edge diameter (40.64 cm and 10.16 cm). Gandvarapu and Ames [1] previously acquired heat transfer measurements for six turbulence conditions including three grid conditions, two lower turbulence aero-combustor conditions, and a low turbulence condition. The data are documented and tabulated for an eight to one range in Reynolds numbers for each test surface with Reynolds numbers ranging from 62,500 to 500,000 for the large leading edge and 15,625 to 125,000 for the smaller leading edge. The data show augmentation levels of up to 136% in the stagnation region for the large leading edge. This heat transfer rate is an increase over the previous aero-combustor turbulence generator which had augmentation levels up to 110%. Note, the rate of increase in heat transfer augmentation decreases for the large cylindrical leading edge inferring only a limited level of turbulence intensification in the stagnation region. The smaller cylindrical leading edge shows more consistency with earlier stagnation region heat transfer results correlated on the TRL (Turbulence, Reynolds number, Length scale) parameter. The downstream regions of both test surfaces continue to accelerate the flow but at a much lower rate than the leading edge. Bypass transition occurs in these regions providing a useful set of data to ground the prediction of transition onset and length over a wide range of Reynolds numbers and turbulence intensity and scales.

20 FOSSIL-FUELED POWER PLANTS↗

Video Fact Sheets: Everyday Advanced Materials

What are Advanced Materials? Ames Laboratory is behind some of the best advanced materials out there. Some of those include: Lead-Free Solder, Photonic Band-Gap Crystals, Terfenol-D, Aluminum-Calcium Power Cable and Nano Particles. Some of these are in products we use every day.

36 MATERIALS SCIENCE↗

Observations of 14 CO 2 in ecosystem respiration from a temperate deciduous forest in Northern Wisconsin

We show that the 14 CO 2 composition of plant and soil respiration can be used to determine the residence time of photosynthetically fixed carbon before it is released back to the atmosphere. To estimate the residence time of actively cycled carbon in a temperate forest, we employed two approaches for estimating the Δ 14 CO 2 of ecosystem respiration (Δ 14 C-R eco ) at the Willow Creek AmeriFlux site in Northern Wisconsin, USA. Our first approach was to construct nighttime Keeling plots from subcanopy profiles of Δ 14 CO 2 and CO 2 , providing estimates of Δ 14 C-R eco of 121.7‰ in June and 42.0‰ in August 2012. These measurements are likely dominated by soil fluxes due to proximity to the ground level. Our second approach utilized samples taken over 20 months within the forest canopy and from 396 m above ground level at the nearby LEF NOAA tall tower site (Park Falls, WI). In this canopy-minus-background approach we employed a mixing model described by Miller and Tans (2003) for estimating isotopic sources by subtracting time-varying background conditions. For the period from May 2011 to December 2012 the estimated Δ 14 C-R eco using the Miller-Tans model was 76.8‰. Together, these Δ 14 C-R eco values represent mean R eco carbon ages of approximately 1–19 years. We also found that heterotrophic soil-respired Δ 14 C at Willow Creek was 5–38‰ higher (i.e., 1–10 years older) than predicted by the Carnegie-Ames-Stanford Approach global biosphere carbon model for the 1 × 1 pixel nearest to the site. Finally, this study provides much needed observational constraints of ecosystem carbon residence times, which are a major source of uncertainty in terrestrial carbon cycle models.

54 ENVIRONMENTAL SCIENCES↗

Strong regional atmospheric 14 C signature of respired CO 2 observed from a tall tower over the midwestern United States

Radiocarbon in CO 2 ( 14 CO 2 ) measurements can aid in discriminating between fast (<1 year) and slower (>5–10 years) cycling of C between the atmosphere and the terrestrial biosphere due to the 14 C disequilibrium between atmospheric and terrestrial C. However, 14 CO 2 in the atmosphere is typically much more strongly impacted by fossil fuel emissions of CO 2 , and, thus, observations often provide little additional constraints on respiratory flux estimates at regional scales. Here we describe a data set of 14 CO 2 observations from a tall tower in northern Wisconsin (USA) where fossil fuel influence is far enough removed that during the summer months, the biospheric component of the 14 CO 2 budget dominates. We find that the terrestrial biosphere is responsible for a significant contribution to 14 CO 2 that is 2–3 times higher than predicted by the Carnegie-Ames-Stanford approach terrestrial ecosystem model for observations made in 2010. This likely includes a substantial contribution from the North American boreal ecoregion, but transported biospheric emissions from outside the model domain cannot be ruled out. The 14 CO 2 enhancement also appears somewhat decreased in observations made over subsequent years, suggesting that 2010 may be anomalous. Furthermore, with these caveats acknowledged, we discuss the implications of the observation/model comparison in terms of possible systematic biases in the model versus short-term anomalies in the observations. Going forward, this isotopic signal could be exploited as an important indicator to better constrain both the long-term carbon balance of terrestrial ecosystems and the short-term impact of disturbance-based loss of carbon to the atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Improved efficiency in blue phosphorescent organic light emitting devices using host materials of lower triplet energy than the phosphorescent blue emitter

Data from a series of phosphorescent blue organic light emitting devices OLEDs with emissive layers consisting of either CBP:6% Firpic or mCP:6% FIrpic show that the triplet energy of the hole and electron transport layers can have a larger influence on the external quantum efficiency of an operating OLED than the triplet energy of the host material. These results are important and insightful given the commonly held view that host materials for phosphorescent OLEDs must have a triplet energy higher than that of the emitter in order to obtain high external quantum efficiency (EQE). A new host material, 4-(di-ptolylaminophenyl)diphenylphosphine oxide (DHM-A2), which has a triplet energy less than that of FIrpic is also reported. OLEDs fabricated using DHM-A2 show improved performance (lower drive voltage and higher external quantum efficiency) over OLEDs using 4- (diphenylphosphoryl)-N,N-diphenylaniline (HMA1), a high performance ambipolar DHM-A2 analogue with a triplet energy greater than FIrpic. Our results suggest modified design rules for the development of new, high performance host materials., ames, more focus can be placed on molecular structures that provide good charge transport (i.e., ambipolarity for charge balance) and good molecular stability (for long lifetimes). This improved understanding provides additional flexibility in order to generate OLEDs with lower operating voltage and longer lifetime, while still providing high EQE.

36 MATERIALS SCIENCE↗

Comparing the Performance of Three Land Models in Global C Cycle Simulations: A Detailed Structural Analysis: Structural Analysis of Land Models

Land models are valuable tools to understand the dynamics of global carbon (C) cycle. Various models have been developed and used for predictions of future C dynamics but uncertainties still exist. Diagnosing the models’ behaviors in terms of structures can help to narrow down the uncertainties in prediction of C dynamics. In this study three widely used land surface models, namely CSIRO’s Atmosphere Biosphere Land Exchange (CABLE) with 9 C pools, Community Land Model (version 3.5) combined with Carnegie-Ames-Stanford Approach (CLM-CASA) with 12 C pools and Community Land Model (version 4) (CLM4) with 26 C pools were driven by the observed meteorological forcing. The simulated C storage and residence time were used for analysis. The C storage and residence time were computed globally for all individual soil and plant pools, as well as net primary productivity (NPP) and its allocation to different plant components’ based on these models. Remotely sensed NPP and statistically derived HWSD, and GLC2000 datasets were used as a reference to evaluate the performance of these models. Results showed that CABLE exhibited better agreement with referenced C storage and residence time for plant and soil pools, as compared with CLM-CASA and CLM4. CABLE had longer bulk residence time for soil C pools and stored more C in roots, whereas, CLM-CASA and CLM4 stored more C in woody pools due to differential NPP allocation. Overall, these results indicate that the differences in C storage and residence times in three models are largely due to the differences in their fundamental structures (number of C pools), NPP allocation and C transfer rates. Our results have implications in model development and provide a general framework to explain the bias/uncertainties in simulation of C storage and residence times from the perspectives of model structures.

54 ENVIRONMENTAL SCIENCES↗

Aerodynamic measurements on wind turbines

This article reviews the aerodynamic measurement programs on wind turbines that have been performed in the last decades. It is largely based on results from four projects carried out under auspices of the International Energy Agency (IEA), which are denoted as IEA Tasks 14, 18, 20, and 29. The aim of these projects was to collect and analyze aerodynamic measurements on five field facilities (IEA Tasks 14 and 18), the National Renewable Energy Laboratory Phase VI turbine placed in the large NASA Ames wind tunnel (IEA Task 20), and the Mexico turbine placed in the Large Low Speed Facility of the German Dutch Wind tunnel DNW (IEA Task 29). Other experimental programs with an important aerodynamic content are touched upon as well. Research areas for which these measurements have led to important progress are identified. The progress is illustrated with analyses on these experiments. It is shown that detailed aerodynamic measurements are an absolute necessity for the validation and improvement of wind turbine design codes, where it is also concluded that the amount of measurement data which has been produced until now is still far too limited.

17 WIND ENERGY↗

Systematic Review of Infrapopliteal Drug-Eluting Stents: A Meta-Analysis of Randomized Controlled Trials

IntroductionDrug-eluting stents (DES) have been proposed for the treatment of infrapopliteal arterial disease. We performed a systematic review to provide a qualitative analysis and quantitative data synthesis of randomized controlled trials (RCTs) assessing infrapopliteal DES.Materials and MethodsPubMed (Medline), EMBASE (Excerpta Medical Database), AMED (Allied and Complementary medicine Database), Scopus, CENTRAL (Cochrane Central Register of Controlled Trials), online content, and abstract meetings were searched in September 2012 for eligible RCTs according to the preferred reporting items for systematic reviews and meta-analyses selection process. Risk of bias was assessed using the Cochrane Collaboration's tool. Primary endpoint was primary patency defined as absence of {>=}50 % vessel restenosis at 1 year. Secondary outcome measures included patient survival, limb amputations, change of Rutherford-Becker class, target lesion revascularization (TLR) events, complete wound healing, and event-free survival at 1 year. Risk ratio (RRs) were calculated using the Mantel-Haenszel fixed effects model, and number-needed-to-treat values are reported.ResultsThree RCTs involving 501 patients with focal infrapopliteal lesions were analyzed (YUKON-BTX, DESTINY, and ACHILLES trials). All three RCTs included relatively short and focal infrapopliteal lesions. At 1 year, there was clear superiority of infrapopliteal DES compared with control treatments in terms of significantly higher primary patency (80.0 vs. 58.5 %; pooled RR = 1.37, 95 % confidence interval [CI] = 1.18-1.58, p < 0.0001; number-needed-to-treat (NNT) value = 4.8), improvement of Rutherford-Becker class (79.0 vs. 69.6 %; pooled RR = 1.13, 95 % CI = 1.002-1.275, p = 0.045; NNT = 11.1), decreased TLR events (9.9 vs. 22.0 %; pooled RR = 0.45, 95 % CI = 0.28-0.73, p = 0.001; NNT = 8.3), improved wound healing (76.8 vs. 59.7 %; pooled RR = 1.29, 95 % CI = 1.02-1.62, p = 0.04; NNT = 5.9), and better overall event-free survival (72.2 vs. 57.3 %; pooled RR = 1.26, 95 % CI = 1.10-1.44, p = 0.0006; NNT = 6.7). Conclusion. DES for focal infrapopliteal lesions significantly inhibit vascular restenosis and thereby improve primary patency, decrease repeat procedures, improve wound healing, and prolong overall event-free survival.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Biosynthesis, Microstructural Characterisations and Investigation of In-Vitro Mutagenic and Eco-Toxicological Response of a Novel Microbial Exopolysaccharide Based Biopolymer

A modified microbial polysaccharide based biopolymer has been investigated as a potential candidate towards development of sustainable biomaterials and bioplastics. An in-depth study was carried out to biosynthesize, characterize and assess any possible mutagenic potential and ecotoxicity of the microbial polysaccharide biopolymer. Microstructural investigations using confocal microscopy, Fourier transform (FT)-Raman depth profile mapping and scanning electron microscopy (SEM) of the biosynthetically modified polysaccharide revealed internal structural perturbations, as well as occlusion of granular pores by extraneous materials. The Raman 3D mapping depth profile along with time-of-flight (MALDI-TOF) mass spectrometry also indicated important structural and surface modifications, which could be correlated to the production of microbial exopolysaccharides and secondary metabolites. The study then looked into any possible genetic mutation and ecological risks associated with the biosynthetically modified polysaccharide through the investigation of genotoxicity and ecotoxicity. The genotoxicity study was carried out through bacterial reverse gene mutation (Ames) test by using two different strains (TA98 and TA100) of bacteria. The results did not indicate any mutagenic effect against either of the strains used for the biopolymer samples and was found to be genotoxically safe. Ecotoxicity tests, carried out using bioluminescent bacteria Vibrio fisheri further indicated no ecotoxicity within the given experimental conditions. The study measured the half maximal effective concentration (EC50) to cause a 50% decrease in the light output of the bacteria, a measure of ecotoxicological response of the biopolymer. Overall, results from this study indicated that the novel biopolymer was genotoxically and ecotoxically safe, which offers immense potential for future use of this biopolymer.

36 MATERIALS SCIENCE↗

Mutagenicity and genotoxicity of coal fly ash water leachate

Fly ash is a by-product of coal-fired electricity generation plants. The prevalent practice of disposal is as slurry of ash and water to storage or ash ponds located near power stations. This has lain to waste thousands of hectares of land all over the world. Since leaching is often the cause of off-site contamination and pathway of introduction into the human environment, a study on the genotoxic effects of fly ash leachate is essential. Leachate prepared from the fly ash sample was analyzed for metal content, and tested for mutagenicity and genotoxicity. Analyses of metals show predominance of the metals - sodium, silicon, potassium, calcium, magnesium, iron, manganese, zinc, and sulphate. The Ames Salmonella mutagenicity assay, a short-term bacterial reverse mutation assay, was conducted on two-tester strains of Salmonella typhimurium strains TA97a and TA102. For genotoxicity, the alkaline version of comet assay on fly ash leachate was carried in vitro on human blood cells and in vivo on Nicotiana plants. The leachate was directly mutagenic and induced significantconcentration-dependent increases in DNA damage in whole blood cells, lymphocytes, and in Nicotiana plants. The comet parameters show increases in tail DNA percentage (%), tail length (mu m), and olive tail moment (arbitrary units). Our results indicate that leachate from fly ash dumpsites has the genotoxic potential and may lead to adverse effects on vegetation and on the health of exposed human populations.

01 COAL, LIGNITE, AND PEAT↗

Synergistic effect of microstructure and defects on the initiation of fatigue cracks in additively manufactured Inconel 718

Fatigue cracks in additively manufactured (AMed) Inconel 718 (IN-718) in machined surface condition often initiate from persistent slip bands (PSBs) unlike other popular AM alloys such as 17-4 PH stainless steel or Ti-6Al-4V, where fatigue crack initiation is exclusively from volumetric defects; therefore, a competition between PSB- vs. defect- mediated crack initiation clearly exists. To shed light on the factors governing the competition, this study investigates the characteristics of cyclic strain localization, PSB formation, and crack initiation via crystal plasticity (CP) modeling of cyclic loading on polycrystalline aggregates which are then validated by experiments. In this work, a physics-based, free slip distance (FSD) dependent slip strength evolution law is proposed, which is shown to enable the CP model to simulate the heterogeneous strain distribution in IN-718. Implementing a crack initiation criterion based on strain contrast, the locations and lives for crack initiation can also be calculated. It is shown that both FSD and resolve shear stress influence the strain localization and crack initiation behaviors. The distribution of a localization parameter calculated based on the multiplication of FSD and Schmid factor within a grain is found to correlate well with the locations of PSBs. The maximum values of the localization parameters within a microstructure are shown to correlate well with the experimentally obtained crack initiation lives. The presence of volumetric defects in IN-718 generally do not impact strain localization behavior unless their size is large compared to the grain size.

42 ENGINEERING↗

Systematic validation of non-equilibrium thermochemical models using Bayesian inference

The validation process proposed by Babuška et al. [1] is applied to thermochemical models describing post-shock flow conditions. In this validation approach, experimental data is involved only in the calibration of the models, and the decision process is based on quantities of interest (QoIs) predicted on scenarios that are not necessarily amenable experimentally. Moreover, uncertainties present in the experimental data, as well as those resulting from an incomplete physical model description, are propagated to the QoIs. We investigate four commonly used thermochemical models: a one-temperature model (which assumes thermal equilibrium among all inner modes), and two-temperature models developed by Macheret et al. [2], Marrone and Treanor [3], and Park [4]. Up to 16 uncertain parameters are estimated using Bayesian updating based on the latest absolute volumetric radiance data collected at the Electric Arc Shock Tube (EAST) installed inside the NASA Ames Research Center. Following the solution of the inverse problems, the forward problems are solved in order to predict the radiative heat flux, QoI, and examine the validity of these models. Our results show that all four models are invalid, but for different reasons: the one-temperature model simply fails to reproduce the data while the two-temperature models exhibit unacceptably large uncertainties in the QoI predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hydrothermal synthesis of molybdenum trioxide, characterization and photocatalytic activity

Highlights: • α-MoO{sub 3} micro-belts were synthesized hydrothermally. • Micro-belts were found very rich in surface oxygen vacancies. • CR-F3BS photocatalytic degradation was promising. • The cytotoxicity and mutagenicity were reduced significantly of CR-F3BS. - Abstract: α-MoO{sub 3} micro-belts were synthesized via hydrothermal technique and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), energy dispersive X-ray analysis (EDX) and particle size analyzer. Photo-catalytic activity was evaluated by degrading Coralene Red F3BS (CR-F3BS) dye and process variables i.e., pH, photocatalyst dose, concentration of CR-F3BS and UV exposure time were optimized using response surface methodology (RSM) under central composite design (CCD). Under optimized conditions, up to 95% degradation of CR-F3BS (10 mg/L) was achieved for 120 min UV irradiation time at pH 7 using 2.75 g/L catalyst dose. The obtained RSM model revealed a satisfactory correlation between experimental and predicted CR-F3BS degradation values. Ames and heamolytic tests revealed that the toxicity was reduced significantly as a result of photo-catalytic treatment. In view of promising efficiency, α-MoO{sub 3} micro-belts could possibly be used for the degradation of dyes in textile effluents.

36 MATERIALS SCIENCE↗