Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACCPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9

CMAD: A Self-consistent Parallel Code to Simulate the Electron Cloud Build-up and Instabilities

We present the features of CMAD, a newly developed self-consistent code which simulates both the electron cloud build-up and related beam instabilities. By means of parallel (Message Passing Interface - MPI) computation, the code tracks the beam in an existing (MAD-type) lattice and continuously resolves the interaction between the beam and the cloud at each element location, with different cloud distributions at each magnet location. The goal of CMAD is to simulate single- and coupled-bunch instability, allowing tune shift, dynamic aperture and frequency map analysis and the determination of the secondary electron yield instability threshold. The code is in its phase of development and benchmarking with existing codes. Preliminary results on benchmarking are presented in this paper.

43 PARTICLE ACCELERATORS↗

Calculating IP Tuning Knobs for the PEP II High Energy Ring using Singular Value Decomposition, Response Matrices and an Adapted Moore Penrose Method

The PEP II lattices are unique in their detector solenoid field compensation scheme by utilizing a set of skew quadrupoles in the IR region and the adjacent arcs left and right of the IP. Additionally, the design orbit through this region is nonzero. This combined with the strong local coupling wave makes it very difficult to calculate IP tuning knobs which are orthogonal and closed. The usual approach results either in non-closure, not being orthogonal or the change in magnet strength being too big. To find a solution, the set of tuning quads had to be extended which resulted having more degrees of freedom than constraints. To find the optimal set of quadrupoles which creates a linear, orthogonal and closed knob and simultaneously minimizing the changes in magnet strength, the method using Singular Value Decomposition, Response Matrices and an Adapted Moore Penrose method had to be extended. The results of these simulations are discussed below and the results of first implementation in the machine are shown.

43 PARTICLE ACCELERATORS↗

Measurements of Compression and Emittance Growth after the First LCLS Bunch Compressor Chicane

The Linac Coherent Light Source (LCLS) is a SASE xray free-electron laser project presently under construction at SLAC. The injector section from RF photocathode gun through first bunch compressor chicane was installed during the fall of 2006. The first bunch compressor is located at 250 MeV and nominally compresses a 1-nC electron bunch from an rms length of about 1 mm to 0.2 mm. Transverse phase space and bunch length diagnostics are located immediately after the chicane. We present preliminary measurements and simulations of the longitudinal and transverse phase space after the chicane in various beam conditions, including extreme compression with micron-scale current spikes.

43 PARTICLE ACCELERATORS↗

Electron Cloud Generation And Trapping in a Quadrupole Magnet at the Los Alamos PSR

A diagnostic to measure electron cloud formation and trapping in a quadrupole magnet has been developed, installed, and successfully tested at PSR. Beam studies with this diagnostic show that the electron flux striking the wall in the quadrupole is comparable to or larger than in an adjacent drift. In addition, the trapped electron signal, obtained using the sweeping feature of diagnostic, was larger than expected and decayed very slowly with an exponential time constant of 50 to 100 {micro}s. Experimental results were also obtained which suggest that a significant fraction of the electrons observed in the adjacent drift space were seeded by electrons ejected from the quadrupole.

43 PARTICLE ACCELERATORS↗

Parallel Finite Element Particle-In-Cell Code for Simulations of Space-charge Dominated Beam-Cavity Interactions

Over the past years, SLAC's Advanced Computations Department (ACD) has developed the parallel finite element (FE) particle-in-cell code Pic3P (Pic2P) for simulations of beam-cavity interactions dominated by space-charge effects. As opposed to standard space-charge dominated beam transport codes, which are based on the electrostatic approximation, Pic3P (Pic2P) includes space-charge, retardation and boundary effects as it self-consistently solves the complete set of Maxwell-Lorentz equations using higher-order FE methods on conformal meshes. Use of efficient, large-scale parallel processing allows for the modeling of photoinjectors with unprecedented accuracy, aiding the design and operation of the next-generation of accelerator facilities. Applications to the Linac Coherent Light Source (LCLS) RF gun are presented.

43 PARTICLE ACCELERATORS↗

Optimization of Chromatic Optics Near the Half Integer in PEP-II

The PEP-II collider has benefited greatly from the correction of the chromatic functions. By optimizing sextupole family strengths, it is possible to correct the non-linear chromaticity, the chromatic beta, and the second order dispersion in both the LER and HER. Having implemented some of these corrections, luminosity was improved in PEP-II by almost 10%.

43 PARTICLE ACCELERATORS↗

Status of Nb-Pb Superconducting RF-Gun Cavities

We report on the progress and status of an electron RFgun made of two superconductors: niobium and lead [1]. The presented design combines the advantages of the RF performance of bulk niobium superconducting cavities and the reasonably high quantum efficiency of lead. The design of RF-gun and performance of 3 test cavities without and with the emitting lead spot are reported in this contribution. Measured quantum efficiency for lead at 2K is presented briefly. More details are reported in [9].

43 PARTICLE ACCELERATORS↗

Simulation of the Microbunching Instability in Beam Delivery Systems for Free Electron Lasers

In this paper, we examine the growth of the microbunching instability in the electron beam delivery system of a free electron laser (FEL). We present the results of two sets of simulations, one conducted using a direct Vlasov solver, the other using a particle-in-cell code Impact-Z with the number of simulation macroparticles ranging up to 100 million. Discussion is focused on the details of longitudinal dynamics and on numerical values of uncorrelated (slice) energy spread at different points in the lattice. In particular, we assess the efficacy of laser heater in suppression of the instability, and look at the interplay between physical and numerical noise in particle-based simulations.

43 PARTICLE ACCELERATORS↗

Results of the SLAC LCLS Gun High-Power RF Tests

The beam quality and operational requirements for the Linac Coherent Light Source (LCLS) currently being constructed at SLAC are exceptional, requiring the design of a new RF photocathode gun for the electron source. Based on operational experience at SLAC's GTF and SDL and ATF at BNL as well as other laboratories, the 1.6cell s-band (2856MHz) gun was chosen to be the best electron source for the LCLS, however a significant redesign was necessary to achieve the challenging parameters. Detailed 3-D analysis and design was used to produce near-perfect rotationally symmetric rf fields to achieve the emittance requirement. In addition, the thermo-mechanical design allows the gun to operate at 120Hz and a 140MV/m cathode field, or to an average power dissipation of 4kW. Both average and pulsed heating issues are addressed in the LCLS gun design. The first LCLS gun is now fabricated and has been operated with high-power RF. The results of these high-power tests are presented and discussed.

43 PARTICLE ACCELERATORS↗

Measurement and Analysis of Field Emission Electrons in the LCLS Gun

The field emission was measured during the high-power testing of the LCLS photocathode RF gun. A careful study and analysis of the field emission electrons, or dark current is important in assessing the gun's internal surface quality in actual operation, especially those surfaces with high fields. The first indication of a good RF gun design and fabrication is short processing time to the required fields and low electron emission at high fields. The charge per 2 microsecond long RF pulse (the dark charge) was measured as a function of the peak cathode field for the 1.6 cell, 2.856GHz LCLS RF gun. Faraday cup data was taken for cathode peak RF fields up to 120MV/m producing a maximum of 0.6nC/RF pulse for a diamond-turned polycrystalline copper cathode installed in the gun. Digitized images of the dark charge were taken using a 100 micron thick YAG crystal for a range of solenoid fields to determine the location and angular distribution of the field emitters. The FN plots and emitter image analysis will be described in this paper.

43 PARTICLE ACCELERATORS↗

Initial Commissioning Experience With the LCLS Injector

The Linac Coherent Light Source (LCLS) is a SASE xray Free-Electron Laser (FEL) project presently under construction at SLAC [1]. The injector section, from drive-laser and RF photocathode gun through first bunch compressor chicane, was installed in fall 2006. Initial system commissioning with an electron beam is taking place during the spring and summer of 2007. The second phase of construction, including second bunch compressor and full linac, will begin later, in the fall of 2007. We report here on experience gained during the first phase of machine commissioning, including RF photocathode gun, linac booster section, S-band and X-band RF systems, first bunch compressor, and the various beam diagnostics.

43 PARTICLE ACCELERATORS↗

SPEAR3 Accelerator Physics Update

The SPEAR3 storage ring at Stanford Synchrotron Radiation Laboratory has been delivering photon beams for three years. We will give an overview of recent and ongoing accelerator physics activities, including 500 mA fills, work toward top-off injection, long-term orbit stability characterization and improvement, fast orbit feedback, new chicane optics, low alpha optics & short bunches, low emittance optics, and MATLAB software. The accelerator physics group has a strong program to characterize and improve SPEAR3 performance

43 PARTICLE ACCELERATORS↗

LCLS Injector Drive Laser

Requirements for the LCLS injector drive laser present significant challenges to the design of the system. While progress has been demonstrated in spatial shape, temporal shape, UV generation and rep-rate, a laser that meets all of the LCLS specifications simultaneously has yet to be demonstrated. These challenges are compounded by the stability and reliability requirements. The drive laser and transport system has been installed and tested. We will report on the current operational state of the laser and plans for future improvements.

43 PARTICLE ACCELERATORS↗

The ILC global control system.

The scale and performance parameters of the ILC require new thinking in regards to control system design. This design work has begun quite early in comparison to most accelerator projects, with the goal of uniquely high overall accelerator availability. Among the design challenges are high control system availability, precision timing and rf phase reference distribution, standardizing of interfaces, operability, and maintainability. We present the current state of the design and take a prospective look at ongoing research and development projects.

43 PARTICLE ACCELERATORS↗

Superconducting Materials Testing with a High-Q Copper RF Cavity

Superconducting RF is of increasing importance in particle accelerators. We have developed a resonant cavity with high quality factor and an interchangeable wall for testing of superconducting materials. A compact TE01 mode launcher attached to the coupling iris selectively excites the azimuthally symmetric cavity mode, which allows a gap at the detachable wall and is free of surface electric fields that could cause field emission, multipactor, and RF breakdown. The shape of the cavity is tailored to focus magnetic field on the test sample. We describe cryogenic experiments conducted with this cavity. An initial experiment with copper benchmarked our apparatus. This was followed by tests with Nb and MgB2. In addition to characterizing the onset of superconductivity with temperature, our cavity can be resonated with a high power klystron to determine the surface magnetic field level sustainable by the material in the superconducting state. A feedback code is used to make the low level RF drive track the resonant frequency.

43 PARTICLE ACCELERATORS↗

RF Design of Normal Conducting Deflecting Structures for the Advanced Photon Source

Use of normal conducting deflecting structures for production of short x-ray pulses is now under consideration at Argonne's Advanced Photon Source (APS). The structures have to produce up to 4 MV maximum deflection per pair of structures with a 1 kHz repetition rate. At the same time, the structures should not cause deterioration of beam properties in the APS ring. Following these requirements, we proposed 2815 MHz standing wave deflecting structures with heavy wakefield damping. In this paper we discuss design considerations and present our current design.

43 PARTICLE ACCELERATORS↗

High Power Tests of Normal Conducting Single-Cell Structures

We report the results of the first high power tests of single-cell traveling-wave and standing-wave structures. These tests are part of an experimental and theoretical study of rf breakdown in normal conducting structures at 11.4 GHz. The goal of this study is to determine the gradient potential of normal-conducting rf-powered particle beam accelerators. The test setup consists of reusable mode converters and short test structures and is powered by SLAC's XL-4 klystron. This setup was created for economical testing of different cell geometries, cell materials and preparation techniques with short turn-around time. The mode launchers and structures were manufactured at SLAC and KEK and tested in the SLAC Klystron Test Lab.

43 PARTICLE ACCELERATORS↗