Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ABRASIVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Determination of the Basic Parameters of Impact Interaction of Abrasive Particles Against the Blades of the Rotor Accelerator of a Centrifugal Mill

Ways to improve the efficiency with which materials are pulverized in impact centrifugal mills as well as ways of preventing wear of the blades are proposed. The problem is solved using equations that describe the motion of particles on the surface of the rotor in a polar coordinate system. It is discovered that the rate of impact of the particles against a blade increases linearly with increasing angular velocity. The angle of attack and radius of contact of a particle with the blade are independent of this velocity, though they are substantially affected by the initial position of the particles. The nature of the variation of the rate of impact and the angle of attack is determined, based on which possible wear of the blades may be predicted and measures taken to reduce wear.

42 ENGINEERING↗
DOE OSTI2014

Michrohole Arrays Drilled with Advanced Abrasive Slurry Jet Technology to Efficiently Exploit Enhanced Geothermal Systems

This project had two major areas of research for Engineered/ Enhanced Geothermal System (EGS) development - 1) study the potential benefits from using microholes (i.e., bores with diameters less than 10.16 centimeters/ 4 inches) and 2) study FLASH ASJ to drill/ install those microbores between a well and a fracture system. This included the methods and benefits of drilling vertical microholes for exploring the EGS reservoir and for installing multiple (forming an array of) laterals/ directional microholes for creating the in-reservoir heat exchange flow paths. Significant benefit was found in utilizing small microbore sized connecting bores for EGS efficiency and project life. FLASH ASJ was deemed too complicated to optimally work in such deep reservoirs at this time.

15 GEOTHERMAL ENERGY↗
NASA NTRS1973

Abrasion

Particle erosion of spacecraft surface is considered in aerospace vehicle and associated facility designs. When the speed of the spacecraft with relation to atmospheric suspended particles is high, erosion occurs even when the particles have a hardness less than the exposed surface. Surface impact damage parameters are developed for sand, dust, raindrops, snow, and hail particles at earth surface and at altitude.

Glenn E Daniels↗
NASA NTRS1978

Friction and wear of metals with a single-crystal abrasive grit of silicon carbide: Effect of shear strength of metal

Sliding friction experiments were conducted with spherical, single-crystal silicon carbide riders in contact with various metals and with metal riders in contact with silicon carbide flats. Results indicate that: (1) the friction force in the plowing of metal and (2) the groove height (corresponding to the volume of the groove) are related to the shear strength of the metal. That is, they decrease linearly as the shear strength of the bulk metal increases. Grooves are formed in metals primarily from plastic deformation, with occasional metal removal. The relation between the groove width D and the load W can be expressed by W = kD, superscript n which satisfies Meyer's law.

Miyoshi, K.↗
NASA NTRS1978

Silicon Sheet Growth Development for the Large Area Sheet Task of the Low Cost Solar Array Project. Heat Exchanger Method - Ingot Casting Fixed Abrasive Method - Multi-Wire Slicing

Solar cells fabricated from HEM cast silicon yielded up to 15% conversion efficiencies. This was achieved in spite of using unpurified graphite parts in the HEM furnace and without optimization of material or cell processing parameters. Molybdenum retainers prevented SiC formation and reduced carbon content by 50%. The oxygen content of vacuum cast HEM silicon is lower than typical Czochralski grown silicon. Impregnation of 45 micrometers diamonds into 7.5 micrometers copper sheath showed distortion of the copper layer. However, 12.5 micrometers and 15 micrometers copper sheath can be impregnated with 45 micrometers diamonds to a high concentration. Electroless nickel plating of wires impregnated only in the cutting edge showed nickel concentration around the diamonds. This has the possibility of reducing kerf. The high speed slicer fabricated can achieve higher speed and longer stroke with vibration isolation.

Schmid, F.↗
NASA NTRS1979

The friction and wear of metals and binary alloys in contact with an abrasive grit of single-crystal silicon carbide

Sliding friction experiments were conducted with various metals and iron-base binary alloys (alloying elements Ti, Cr, Mn, Ni, Rh and W) in contact with single crystal silicon carbide riders. Results indicate that the friction force in the plowing of metal and the groove height (corresponding to the wear volume of the groove) decrease linearly as the shear strength of the bulk metal increases. The coefficient of friction and groove height generally decrease, and the contact pressure increases with an increase in solute content of binary alloys. There appears to be very good correlation of the solute to iron atomic ratio with the decreasing rate of change of coefficient of friction, the decreasing rate of change of groove height and the increasing rate of change of contact pressure with increasing solute content. These rates of change increase as the solute to iron atomic radius ratio increases or decreases from unity.

Miyoshi, K.↗
NASA NTRS1979

Silicon Ingot Casting - Heat Exchanger Method Multi-wire Slicing - Fixed Abrasive Slicing Technique. Phase 3 Silicon Sheet Growth Development for the Large Area Sheet Task of the Low-cost Solar Array Project

Several 20 cm diameter silicon ingots, up to 6.3 kg. were cast with good crystallinity. The graphite heat zone can be purified by heating it to high temperatures in vacuum. This is important in reducing costs and purification of large parts. Electroplated wires with 45 um synthetic diamonds and 30 um natural diamonds showed good cutting efficiency and lifetime. During slicing of a 10 cm x 10 cm workpiece, jerky motion occurred in the feed and rocking mechanisms. This problem is corrected and modifications were made to reduce the weight of the bladeheat by 50%.

Schmid, F.↗
NASA NTRS1979

Abrasion of windblown particles on Mars - Erosion of quartz and basaltic sand under simulated Martian conditions

The results of a series of laboratory experiments initiated to simulate Martian eolian erosion are presented. Experiments were conducted under Martian atmospheric pressure and compared to natural eolian sand produced on earth. It is reported that the less dense atmosphere on Mars resulted in more energetic eolian erosion manifested by an slightly higher rate of grain rounding and surface textures that included semicircular depressions termed 'popouts'. It is suggested that physical and chemical weathering may proceed more rapidly on Mars than on earth, given a sufficient supply of water vapor. In addition, clay mineral formations should be facilitated by the presence of large amounts of disrupted material. Finally, it is noted that the disrupted material could increase the ability of the soil to act as a reservoir for water thereby provisionally explaining the large amount of bound water on the surface soil material over much of Mars.

Krinsley, D.↗