The Evolution and Mass Dependence of Galaxy Cluster Pressure Profiles at 0.05 ≤ z ≤ 0.60 and 4 × 10 14 M ⊙ ≤ M 500 ≤ 30 × 10 14 M ⊙
Explore the source record for details and available documents.
Jack Sayers↗
SEARCH · Engineering Papers
Results for “10-Be”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Effects of proton irradiation and temperature on 1 ohm-cm and 10 ohm-cm silicon solar cells
The 1 ohm-cm and 10 ohm-cm silicon solar cells were exposed to 1.0 MeV protons at a fixed flux of 10 to the 9th power P/sq cm-sec and fluences of 10 to the 10th power, 10 to the 11th power, 10 to the 12th power and 3 X 10 to the 12th power P/sq cm. I-V curves of the cells were made at room temperature, 65 C and 165 C after each irradiation. A value of 139.5 mw/sq cm was taken as AMO incident energy rate per unit area. Degradation occurred for both uncovered 1 ohm-cm and 10 ohm-cm cells. Efficiencies are generally higher than those of comparable U.S. cells tested earlier. Damage (loss in maximum power efficiency) with proton fluence is somewhat higher for 10 ohm-cm cells, measured at the three temperatures, for fluences above 2 X 10 to the 11th power P/sq cm. Cell efficiency, as expected, changes drastically with temperature.
Nicoletta, C. A.↗
Dealing with Processing Chapter 10 Files from Multiple Vendors
This presentation discusses the experiences of the NASA Dryden Flight Research Center's (DFRC) Western Aeronautical Test Range (WATR) in dealing with the problems encountered while performing post flight data processing using the WATR's data collection/processing system on Chapter 10 files from different Chapter 10 recorders. The transition to Chapter 10 recorders has brought Vvith it an assortment of issues that must be addressed: the ambiguities of language in the Chapter 10 standard, the unrealistic near-term expectations of the Chapter 10 standard, the incompatibility of data products generated from Chapter 10 recorders, and the unavailability of mature Chapter 10 applications. Some of these issues properly belong to the users of Chapter 10 recorders, some to the manufacturers, and some to the flight test community at large. The goal of this presentation is to share the WATR's lesson learned in processing data products from various Chapter 10 recorder vendors. The WATR could benefit greatly in the open forum Vvith lessons learned discussions with other members of the flight test community.
Knudtson, Kevin Mark↗
Simulations of 7 Be and 10 Be with the GEOS-Chem global model v14.0.2 using state-of-the-art production rates
The cosmogenic radionuclides 7 Be and 10 Be are useful aerosol tracers for atmospheric transport studies. Combining 7 Be and 10 Be measurements with an atmospheric transport model can not only improve our understanding of the radionuclide transport and deposition processes but also provide an evaluation of the transport process in the model. To simulate these aerosol tracers, it is critical to evaluate the influence of radionuclides production uncertainties on simulations. Here we use the GEOS-Chem chemical transport model driven by the MERRA-2 reanalysis to simulate 7 Be and 10 Be with different production scenarios: the default production rate in GEOS-Chem based on an empirical approach (Lal and Peters, 1967; denoted as LP67), and two production rates from the CRAC:Be (Cosmic Ray Atmospheric Cascade: Beryllium; Poluianov et al., 2016) model considering only geomagnetic cut-off rigidities for a geocentric axial dipole (denoted as P16) or realistic spatial geomagnetic cut-off rigidity variations due to non-dipole moments of the geomagnetic field (denoted as P16spa). The model results are comprehensively evaluated with a large number of measurements including surface air concentrations and deposition fluxes. The model with the P16spa production can reproduce the absolute values and temporal variability of 7 Be and 10 Be surface concentrations and deposition fluxes on annual and sub-annual scales, as well as the vertical profiles of air concentrations. Simulations with the LP67 production tend to overestimate the absolute values of 7 Be and 10 Be concentrations. The P16 simulations suggest less than 10% differences compared to P16spa but tend to produce a significant positive bias (>20%) in the 7 Be deposition fluxes over East Asia. We find that the deposition fluxes are more sensitive to the production in the troposphere and downward transport from the stratosphere. Independent of the production models, surface air concentrations and deposition fluxes from all simulations show similar seasonal variations, suggesting a dominant meteorological influence. The model can also simulate reasonably the stratosphere-troposphere exchange process of 7 Be and 10 Be by producing stratospheric contribution and 10 Be/ 7 Be ratio values that agree with measurements. Finally, we illustrate the importance of including the time-varying solar modulation in the production calculation, which can significantly improve the agreement between model results and measurements, especially at mid- and high- latitudes. Reduced uncertainties in the production rates, as demonstrated in this study, improve the utility of 7 Be and 10 Be as aerosol tracers for evaluating and testing transport and scavenging processes in global models.
Minjie Zheng↗
Effects of electron irradiation and temperature on 1 ohm-cm and 10 ohm-cm silicon solar cells
One OHM-cm and 10 OHM-cm silicon solar cells were exposed to 1.0 MeV electrons at a fixed flux of 10 to the 11th power e/sq cm/sec and fluences of 10 to the 13th power, 10 to the 14th power and 10 to the 15th power e/sq.cm. 1-V curves of the cells were made at room temperature, - 63 C and + or - 143 C after each irradiation. A value of 139.5 mw/sq cm was used as AMO incident energy rate per unit area. The 10 OHM-cm cells appear more efficient than 1 OHM-cm cells after exposure to a fluence greater than 10 to the 14th power e/sq cm. The 1.0 MeV electron damage coefficients for both 1 OHM-cm and 10 OHM-cm cells are somewhat less than those for previously irradiated cells at room temperature. The values of the damage coefficients increase as the cell temperatures decrease. Efficiencies pertaining to maximum power output are about the same as those of n on p silicon cells evaluated previously.
Nicoletta, C. A.↗
Pioneer 10 ultraviolet photometer observations of Jovian UV emission in 1973
The Pioneer 10 ultraviolet measurements obtained during the Jupiter encounter in 1973 have been further examined by using improved data handling and analysis techniques. The Pioneer 10 observations of Jupiter and its satellites during the encounter have been carefully reviewed in order to improve our understanding of the morphology of the Io plasma torus and Jupiter's upper atmosphere and to investigate the possible existence of other emission source such as Europa. In addition, the morphology of Io's bimodal torus observed during the Pioneer 10 encounter has been compared with the Voyager observations obtained approximately 6 years after the Pioneer 10 flyby and significant differences in the torus characteristics are found. The Io torus in 1973 was more similar to the 1992 Ulysses observations of a longitudinally asymmetric ring than to the complete ring observed by Voyager. Pioneer 10 observed a significantly dimmer Io torus and Jupiter upper atmosphere in the EUV compared to the Voyager observations. Apart from the torus and Jupiter, Pioneer 10 observed additional emissions which have been attributed to Io itself. Three distinct possibilities have been discussed to explain these additional emissions. The most likely is that Pioneer 10 observed volcanism on Io. There is also evidence of Pioneer 10 observing emissions from Europa. The present analysis clearly shows that the Jovian system in 1973 was significantly different from that observed in 1979.
Wu, F. M.↗
Experimental investigation of a 10-percent-thick helicopter rotor airfoil section designed with a viscous transonic analysis code
An investigation was conducted in the Langley 6- by 28-Inch Transonic Tunnel to determine the two dimensional aerodynamic characteristics of a 10-percent-thick helicopter rotor airfoil at Mach numbers from 0.33 to 0.87 and respective Reynolds numbers from 4.9 x 10 to the 6th to 9.8 x 10 to the 6th. This airfoil, designated the RC-10(N)-1, was also investigated at Reynolds numbers from 3.0 x 10 to the 6th to 7.3 x 10 to the 6th at respective Mach numbers of 0.33 to 0.83 for comparison wit the SC 1095 (with tab) airfoil. The RC-10(N)-1 airfoil was designed by the use of a viscous transonic analysis code. The results of the investigation indicate that the RC-10(N)-1 airfoil met all the design goals. At a Reynolds number of about 9.4 x 10 to the 6th the drag divergence Mach number at zero normal-force coefficient was 0.815 with a corresponding pitching-moment coefficient of zero. The drag divergence Mach number at a normal-force coefficient of 0.9 and a Reynolds number of about 8.0 x 10 to the 6th was 0.61. The drag divergence Mach number of this new airfoil was higher than that of the SC 1095 airfoil at normal-force coefficients above 0.3. Measurements in the same wind tunnel at comparable Reynolds numbers indicated that the maximum normal-force coefficient of the RC-10(N)-1 airfoil was higher than that of the NACA 0012 airfoil for Mach numbers above about 0.35 and was about the same as that of the SC 1095 airfoil for Mach numbers up to 0.5.
Noonan, K. W.↗
Far-IR spectroscopy of the galactic center: Neutral and ionized gas in the central 10 pc of the galaxy
The 3P1 - 3P2 fine structure line emission from neutral atomic oxygen at 63 microns in the vicinity of the galactic center was mapped. The emission is extended over more than 4' (12 pc) along the galactic plane, centered on the position of Sgr A West. The line center velocities show that the O I gas is rotating around the galactic center with an axis close to that of the general galactic rotation, but there appear also to be noncircular motions. The rotational velocity at R is approximately 1 pc corresponds to a mass within the central pc of about 3 x 10(6) solar mass. Between 1 and 6 pc from the center the mass is approximately proportional to radius. The (O I) line probability arises in a predominantly neutral, atomic region immediately outside of the ionized central parsec of out galaxy. Hydrogen densities in the (O I) emitting region are 10(3) to 10(6) cm(-3) and gas temperatures are or = 100 K. The total integrated luminosity radiated in the line is about 10(5) solar luminosity, and is a substantial contribution to the cooling of the gas. Photoelectric heating or heating by ultraviolet excitation of H2 at high densities (10(5) cm(-3)) are promising mechanisms for heating of the gas, but heating due to dissipation of noncircular motions of the gas may be an alternative possibility. The 3P1 - 3P0 fine structure line of (O III) at 88 microns toward Sgr A West was also detected. The (O III) emission comes from high density ionized gas (n 10(4) cm(-3)), and there is no evidence for a medium density region (n 10(3) cm(-3)), such as the ionized halo in Sgr A West deduced from radio observations. This radio halo may be nonthermal, or may consist of many compact, dense clumps of filaments on the inner edges of neutral condensations at R or = 2 pc.
Hollenbach, D. J.↗
Energy dependence of cosmic ray composition above 10(15) GeV/nucleus
It is argued that above 10 to the 5th power GeV/nucleus, in the range where charge-resolved spectra have not yet been determined, the appropriate measures of equal-energy composition are 1nA and 1nA , the mean value and dispersion relative to the mean value and dispersion relative to the mean of 1nA, where A is the mass number. Experimental data which are sensitive to changes in 1nA with increasing energy are examined. It is found that, taken as a whole, they show no change (+ or 0.5) between 10 to the 5th power and 10 to the 6th power GeV, and a decrease of 1.5 + or - 0.5 between 10 to the 6th power and 10 to the 8th power GeV, with no further change + or - 0.5) above 10 to the 8th power GeV. Taken as a whole, the various indirect estimates of the absolute value of 1nA above 10 to the 5th power GeV/nucleus are also consistent with this pattern. For a wide range of astrophysically plausible composition models the value of the other measure, 1nA is insensitive to changes in 1nA . Because of this the existing data on 1nA can likewise easily be reconciled with this pattern.
Linsley, J.↗
An absolute photometric system at 10 and 20 microns
Two new direct calibrations at 10 and 20 microns are presented in which terrestrial flux standards are referred to infrared standard stars. These measurements give both good agreement and higher accuracy when compared with previous direct calibrations. As a result, the absolute calibrations at 10 and 20 microns have now been determined with accuracies of 3 and 8 percent, respectively. A variety of absolute calibrations based on extrapolation of stellar spectra from the visible to 10 microns are reviewed. Current atmospheric models of A-type stars underestimate their fluxes by about 10 percent at 10 microns, whereas models of solar-type stars agree well with the direct calibrations. The calibration at 20 microns can probably be determined to about 5 percent by extrapolation from the more accurate result at 10 microns. The photometric system at 10 and 20 microns is updated to reflect the new absolute calibration, to base its zero point directly on the colors of A0 stars, and to improve the accuracy in the comparison of the standard stars.
Rieke, G. H.↗
The stellar content of LH 9 and 10 (N11) in the LMC - A case for sequential star formation
The young OB associations Lucke-Hodge 9 and 10 are studied with UBV photometry that is independent of reddening to determine the IMF directly from star counts. The temperature and reddening of the stars are determined which, in conjunction with the spectroscopic classification of the earliest stars, is employed to place the stellar groups on the theoretical H-R diagram. Observations are also presented of the highly compact H II region/knot N11A and the multiple system HD 32228, and LH 9 and 10 are compared. The Lyman ionizing flux calculated at 4.9-7.2 x 10 exp 50/s agrees well with flux required to generate the H-alpha luminosity of the H II region. LH 10 has a much flatter slope, a higher ratio of higher-mass to lower-mass stars, and greater reddening than LH 9, and LH 10 contains all of the O stars earlier than O6. It is concluded that LH 9 is older than LH 10 and probably contributed to the initiation of star formation in LH 10.
Parker, Joel WM.↗
Shock-Wave/Boundary-Layer Interaction (SWBLI) Experiments in the Presence of Transition-to-Turbulence on a Flat Plate Model in the NASA LaRC 31-Inch Mach 10 Air Tunnel
Historically, there have been a limited number of studies involving Transitional Shock-Wave/Boundary-Layer Interactions (XSWBLI) in hypersonic flows, the majority of which have been performed at Mach Numbers of 7.5 and below. Additionally, there have been even fewer such experiments which incorporate non-intrusive and optical diagnostics. NASA Langley Research Center (NASA LaRC), in collaboration with The University of Texas at San Antonio (UTSA) and The University of Tennessee Space Institute (UTSI), is currently planning and preparing for a series of experimental aerodynamic tests using the NASA LaRC 31-inch Mach 10 Air Tunnel. The experiments will primarily focus on studying the dynamics of Shock-Wave/Boundary-Layer Interactions (SWBLI) in the presence of transition (XSWBLI) and turbulence (SWTBLI) on a large, flat plate model at a freestream Mach number of 10. Besides continued interest in understanding the flow at high Mach numbers, executing such tests at Mach 10 avoids some known concerns and will aid in solving new problems. XSWBLI are a highly unsteady phenomena and the generation of XSWBLI at lower Mach numbers can prove to be a significant challenge. This concern will be somewhat mitigated in the Mach 10 flow, as boundary layers become increasingly stabilized, but some difficulty in achieving transition is still expected. Modelling SWBLI in the presence of transitional and turbulent boundary layers has also proven to be difficult, so a high-Mach number experiment which applies non-intrusive and optical diagnostics will aid in solving a unique problem as well as advancing the understanding and characterization of an aerodynamic surface at Mach 10.The NASA LaRC 31-inch Wind Tunnel incorporates a test section having a cross-section of 31-inches × 31-inches and provides optical access to the test section via three (3) ultra-violet (UV) transmitting windows on the top, side, and bottom. The Mach 10 operating conditions will consist of pressures (P0) ranging from 2.4 to 10MPa (348 to 1,450 psi) at a temperature (T0) of 1,000 K (1,800 °R). The NASA LaRC 31-inch wind tunnel will deliver 1-minute blow-down runs, of which 30-45 seconds will be consumed to reach the aforementioned test conditions. The pump down time between runs will be approximately 45-60 minutes, which will provide for 6-10 test runs per day over the course of a weeklong entry. The proposed flat plate model will be constructed of stainless steel with geometry consisting of a10-inch × 30-inch upper surface and a 2-inch thickness. The model will be designed to support multiple leading-edge inserts in order to examine blunt, round, and sharp leading edges at Mach 10. Adjustments will be made to manage boundary layer thickness as well as the strength and size of the shock interaction region for each test. Measurements and diagnostics will be performed though high-speed Schlieren, on-body high-speed pressure transducers, IR thermography, and oil flow visualization. Hypersonic vehicle applications have and will continue to emerge at the forefront of aerospace. The NASA-UTSA-UTSI team realizes the value of characterizing SWBLI, XSWBLI, and SWTBLI behaviors well beyond single-digit hypersonic Mach numbers. As hypersonic vehicle speed capabilities continue to increase, measurement and diagnostic methods for Mach numbers of 10 and beyond will provide the foundation for a firm understanding of flow field behavior which will directly influence the advancement of technologies towards the design and manufacturing of high-speed aerodynamic surfaces, controls, thermal protection systems, acoustic treatments, and structural components. The use of non-intrusive and optical diagnostic methods in such experimentation is pivotal in developing the visualization and empirical data necessary to advance the aforementioned technology areas.
Shockwave/Boundary-Layer Interactions↗
Propagation effects on satellite systems at frequencies below 10 GHz: A handbook for satellite systems design
Frequencies below 10 GHz continue to be used for a large portion of satellite service, and new applications, including mobile satellite service and the global positioning system, use frequencies below 10 GHz. As frequency decreases below 10 GHz, attenuation due to precipitation and gases decreases and ionospheric effects increase. Thus the ionosphere, which can be largely neglected above 10 GHz, receives major attention. Although attenuation and depolarization due to rain are less severe below 10 GHz than above, they are nevertheless still important and constitute another major topic. The handbook emphasizes the propagation effects on satellite communications but material that is pertinent to radio navigation and positioning systems and deep-space telecommunications is included as well. Chapter 1 through 7 describe the various propagation impairments, and Chapter 9 is devoted to the estimation or calculation of the magnitudes of these effects for use in system design. Chapter 10 covers link power budget equations and the role of propagation effects in these equations. Chapter 8 deals with the complex subject of interference between space and terrestrial systems.
Flock, Warren L.↗
Mach 10 computational study of a three-dimensional scramjet inlet flow field
The present work documents the computational results for a combined computational and experimental parametric study of the internal aerodynamics of a generic three-dimensional sidewall-compression scramjet inlet configuration at Mach 10. The three-dimensional Navier-Stokes code SCRAMIN was chosen for the computational portion of the study because it uses a well-known and well-proven numerical scheme and has shown favorable comparison with experiment at Mach numbers between 2 and 6. One advantage of CFD was that it provided flow field data for a detailed examination of the internal flow characteristics in addition to the surface properties. The experimental test matrix at mach 10 included three geometric contraction ratios (3, 5, and 9), three Reynolds numbers (0.55 x 10(exp 6) per foot, 1.14 x 10(exp 6) per foot, and 2.15 x 10(exp 6) per foot), and three cowl positions (at the throat and two forward positions). Computational data for two of these configurations (the contraction ratio of 3, Re = 2.15 x 10 (exp 6) per foot, at two cowl positions) are presented along with a detailed analysis of the flow interactions in successive computational planes.
Holland, Scott D.↗
Mach 10 computational study of a three-dimensional scramjet inlet flow field
The present work documents the computational results for a combined computational and experimental parametric study of the internal aerodynamics of a generic three-dimensional sidewall-compression scramjet inlet configuration at Mach 10. The three-dimensional Navier-Stokes code SCRAMIN was chosen for the computational portion of the study because it uses a well-known and well-proven numerical scheme and has shown favorable comparison with experiment at Mach numbers between 2 and 6. One advantage of CFD was that it provided flow field data for a detailed examination of the internal flow characteristics in addition to the surface properties. The experimental test matrix at Mach 10 included three geometric contraction ratios (3, 5, and 9), three Reynolds numbers (0.55 x 10(exp 6) per foot, 1.14 x 10(exp 6) per foot, and 2.15 x 10(exp 6) per foot), and three cowl positions (at the throat and two forward positions). Computational data for two of these configurations (the contraction ratio of 3, Re = 2.15 x 10(exp 6) per foot, at two cowl positions) are presented along with a detailed analysis of the flow interactions in successive computational planes.
Holland, Scott D.↗
Mach 10 experimental database of a three-dimensional scramjet inlet flow field
The present work documents the experimental database of a combined computational and experimental parametric study of the internal aerodynamics of a generic three-dimensional sidewall compression scramjet inlet configuration at Mach 10. A total of 356 channels of pressure data, including static pressure orifices, pitot pressures, and exit flow rakes, along with oil flow and infrared thermography, provided a detailed experimental description of the flow. Mach 10 tests were performed for three geometric contraction ratios (3, 5, and 9), three Reynolds numbers (0.55 x 10(exp 6) per foot, 1.14 x 10(exp 6) per foot, and 2.15 x 10(exp 6) per foot), and three cowl positions (at the throat and two forward positions). For the higher contraction ratios, a large forward separation of the inflow boundary layer was observed, making the high contraction ratio configurations unsuitable for flight operation. A decrease in the freestream unit Reynolds number (Re) of only a factor of 2 led to a similar upstream separation. Although the presence of such large-scale separations leads to the question of whether the inlet is started, the presence of internal oblique swept shock interactions on the sidewalls seems to indicate that at least in the classical sense, the inlet is not unstarted. The laminar inflow boundary layer therefore appears to be very sensitive to increases in contraction ratio (CR) or decreases in Reynolds number; only the CR = 3 configuration with 0.25, and 50 percent cowl at Re = 2.15 x 10(exp 6) per foot operated 'on design'.
Holland, Scott D.↗
Prototype development and test results of a continuous ambient air monitoring system for hydrazine at the 10 ppb level
A Hydrazine Vapor Area Monitor (HVAM) system is currently being field tested as a detector for the presence of hydrazine in ambient air. The MDA/Polymetron Hydrazine Analyzer has been incorporated within the HVAM system as the core detector. This analyzer is a three-electrode liquid analyzer typically used in boiler feed water applications. The HVAM system incorporates a dual-phase sample collection/transport method which simultaneously pulls ambient air samples containing hydrazine and a very dilute sulfuric acid solution (0.0001 M) down a length of 1/4 inch outside diameter (OD) tubing from a remote site to the analyzer. The hydrazine-laden dilute acid stream is separated from the air and the pH is adjusted by addition of a dilute caustic solution to a pH greater than 10.2 prior to analysis. Both the dilute acid and caustic used by the HVAM are continuously generated during system operation on an "as needed" basis by mixing a metered amount of concentrated acid/base with dilution water. All of the waste water generated by the analyzer is purified for reuse by Barnstead ion-exchange cartridges so that the entire system minimizes the generation of waste materials. The pumping of all liquid streams and mixing of the caustic solution and dilution water with the incoming sample are done by a single pump motor fitted with the appropriate mix of peristaltic pump heads. The signal to noise (S/N) ratio of the analyzer has been enhanced by adding a stirrer in the MDA liquid cell to provide mixing normally generated by the high liquid flow rate designed by the manufacturer. An onboard microprocessor continuously monitors liquid levels, sample vacuum, and liquid leak sensors, as well as handles communications and other system functions (such as shut down should system malfunctions or errors occur). The overall system response of the HVAM can be automatically checked at regular intervals by measuring the analyzer response to a metered amount of calibration standard injected into the dilute acid stream. The HVAM system provides two measurement ranges (threshold limit value (TLV): 10 to 1000 parts per billion (ppb)/LEAK: 100 ppb to 10 parts per million (ppm)). The LEAK range is created by dilution of the sulfuric acid/hydrazine liquid sample with pure water. This dual range capability permits the analyzer to quantify ambient air samples whose hydrazine concentrations range from 10 ppb to as high as 10 ppm. The laboratory and field prototypes have demonstrated total system response times on the order of 10 to 12 minutes for samples ranging from 10 to 900 ppb in the lLV mode and is greater than 2 minutes for samples ranging from 100 to 1300 ppb in the LEAK mode. Service intervals of over 3 months have been demonstrated for continuous 24 hour/day, 7 day/week usage. The HVAM is made up of a purged cabinet that contains power supplies, RS422 signal transmission capabilities, a UPS, an on-site warning system, and a Line Replaceable Unit (LRU). The LRU includes all of the liquid flow system, the analyzer, the control/data system microprocessor and assorted flow and liquid-level sensors. The LRU is mounted on a track slide system so it can be serviced inplace or totally removed and quickly exchanged with another calibrated unit, thus minimizing analyzer downtime. Once an LRU is removed from an analyzer enclosure, it can be brought to a laboratory facility for complete calibration and periodic maintenance.
Meneghelli, Barry↗
Solar radio spectrum extended to 10 km wavelength
Solar radio spectra for quiet times and radio bursts in the wavelength range from 1 mm to 10 km are presented. Solar nonthermal emission in the range of 100 m to 10 km was monitored by means of long wire antennas connected to multi-channel radiometers in the frequency range 25 kHz to 10 MHz on board the IMP-6 and RAE-1 satellites. Flux densities for very intense type III bursts with intensities ranging from 10 to the -18th to 10 to the -14th W/sq m per Hz with maxima at 330 to 1500 m are shown, and a power-law wavelength distribution function of maximum burst intensities is derived. Intensities of a large type III noise storm are shown to increase with increasing wavelength to a peak near 500 m. The flux densities of both types of burst emission are observed to greatly exceed quiet sun intensities at long wavelengths.
Weber, R. R.↗