Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface roughness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Scatterometer results from shorefast and floating sea ice

Multipolarized scatterometer sea ice measurements at 13.3 GHz obtained during the winter and spring of 1975-76 from a number of flight lines off the east coast of Canada were analyzed. Radar scattering coefficients, sigma, were calculated for several regions of sea ice as interpreted from aerial photographs. The variation in sigma which incidence angle is presented for HH (Horizontal transmit - Horizontal receive) and HV (Horizontal transmit - Vertical receive) polarizations for the various ice regions. The depolarization ratio (sigma HH/sigma HV) as a function of incidence angle is also given. The sea ice regions studied included shorefast ice with varying degrees of snow cover and surface roughness and several varieties of floating sea ice with different thicknesses.

Cihlar, J.↗
NASA NTRS1977

Estimation of soil moisture with radar remote sensing

The radar response to soil moisture content was investigated using a truck-mounted 1-18 GHz (30-1.67 cm wavelength, respectively) active microwave spectrometer (MAS) system. The sensitivity to soil moisture content and the accuracy with which it could be estimated were evaluated for both bare and vegetation-covered fields. Bare field experiments were conducted to determine the optimum radar parameters (frequency, angle of incidence range, and polarization configuration) for minimizing the response to surface roughness while retaining strong sensitivity to moisture content. In the vegetation-covered case, the effects of crop type, crop height and row direction relative to the radar look direct were evaluated.

Batlivala, P. P.↗
NASA NTRS1978

Radar scattering laws and wavelength dependence of the lunar surface

Data from Apollo lunar bistatic radar experiments have been processed to give probability density functions for surface slopes. These show best agreement with a Hagfors scattering law, though data having both gaussian and exponential characteristics also exist. Surface roughness estimates range from 4 deg in maria to at least 8 deg in highlands, values which are appropriate to 25 m horizontal scales and which are areal averages over tens of square kilometers. Roughness varies with wavelength, most strongly in maria.

Simpson, R. A.↗
NASA NTRS1978

Ferrographic analysis of wear particles from sliding elastohydrodynamic experiments

The Ferrograph was used to analyze wear debris generated in a sliding elastohydrodynamic contact. The amount of wear debris correlates well with the ratio of film thickness to composite surface roughness (A ratio). The general wear level parameter and the wear severity index yielded similar correlations with average A ratios. Essentially all the generated wear particles were of the normal rubbing wear type. The Ferrograph was more sensitive in detecting the wear debris than was the commonly used emission spectrograph.

Jones, W. R., Jr.↗
NASA NTRS1978

A comparison of wake characteristics of model and prototype buildings in transverse winds

Previously measured mean velocity and turbulence intensity profiles in the wake of a 26.8-m long building 3.2 m high and transverse to the wind direction in an atmospheric boundary layer several hundred meters thick were compared with profiles at corresponding stations downstream of a 1/50-scale model on the floor of a large meteorological wind tunnel in a boundary layer 0.61 m in thickness. The validity of using model wake data to predict full scale data was determined. Preliminary results are presented which indicate that disparities result from differences in relative depth of logarithmic layers, surface roughness, and the proximity of upstream obstacles.

Logan, E., Jr.↗
NASA NTRS1977

Aerodynamic performance of conventional and advanced design labyrinth seals with solid-smooth abradable, and honeycomb lands

Labyrinth air seal static and dynamic performance was evaluated using solid, abradable, and honeycomb lands with standard and advanced seal designs. The effects on leakage of land surface roughness, abradable land porosity, rub grooves in abradable lands, and honeycomb land cell size and depth were studied using a standard labyrinth seal. The effects of rotation on the optimum seal knife pitch were also investigated. Selected geometric and aerodynamic parameters for an advanced seal design were evaluated to derive an optimized performance configuration. The rotational energy requirements were also measured to determine the inherent friction and pumping energy absorbed by the various seal knife and land configurations tested in order to properly assess the net seal system performance level. Results indicate that: (1) seal leakage can be significantly affected with honeycomb or abradable lands; (2) rotational energy absorption does not vary significantly with the use of a solid-smooth, an abradable, or a honeycomb land; and (3) optimization of an advanced lab seal design produced a configuration that had leakage 25% below a conventional stepped seal.

Stocker, H. L.↗
NASA NTRS1978

The practical impact of elastohydrodynamic lubrication

The use of elastohydrodynamics in the analysis of rolling element bearings is discussed. Relationships for minimum film thickness and tractive force were incorporated into computer codes and used for bearing performance prediction. The lambda parameter (ratio of film thickness to composite surface roughness) was shown to be important in predicting bearing life and failure mode. Results indicate that at values of lambda below 3 failure modes other than the classic subsurface initiated fatigue can occur.

Anderson, W. J.↗
NASA NTRS1978

Measurement of ocean temperature and salinity via microwave radiometry

Sea-surface temperature with an accuracy of 1 C and salinity with an accuracy of 1% were measured with a 1.43 and 2.65 GHz radiometer system after correcting for the influence of cosmic radiation, intervening atmosphere, sea-surface roughness, and antenna beamwidth. The radiometers are a third-generation system using null-balancing and feedback noise injection. Flight measurements from aircraft over bay regions and coastal areas of the Atlantic resulted in contour maps with spatial resolution of 0.5 km.

Blume, H.-J. C.↗
NASA NTRS1978

Microwave remote sensing of sea ice in the AIDJEX Main Experiment

A microwave remote sensing program of sea ice in the Beaufort Sea was conducted during the Arctic Ice Dynamics Joint Experiment (AIDJEX). Several types of both passive and active sensors were used to perform surface and aircraft measurements during all seasons of the year. In situ observations were made of physical properties (salinity, temperature, density, surface roughness), dielectric properties, and passive microwave measurements were made of first-year, multiyear, and first-year/multiyear mixtures. Airborne passive microwave measurements were performed with the electronically scanning microwave radiometer while airborne active microwave measurements were performed by synthetic aperture radar, X- and L-band radar, and a scatterometer.

Campbell, W. J.↗
NASA NTRS1978

Evaporator film coefficients of grooved heat pipes

The heat transfer rate in the meniscus attachment region of a grooved heat pipe evaporator is studied theoretically. The analysis shows that the evaporation takes place mainly in the region where the liquid changes its shape sharply. However, comparisons with available heat transfer data indicate that the heat transfer rate in the meniscus varying region is substantially reduced probably due to groove wall surface roughness.

Kamotani, Y.↗
NASA NTRS1978

Removal of atmospheric effects from satellite imagery of the oceans

The paper analyzes the effects of atmospheric and sea surface scattering on the determination of ocean color from satellite imagery and proposes an algorithm for removing a large portion of these effects. The algorithm is based on the observations that (1) the upward radiance from the unwanted photons can be divided into effects resulting from Rayleigh scattering alone and those resulting from aerosol scattering alone, (2) the aerosol scattering phase function should be nearly independent of wavelength, and (3) the Rayleigh component can be computed without a knowledge of the sea surface roughness. The ratio of the aerosol optical thickness at the wavelength of interest to the aerosol optical thickness at 750 nm is used in the algorithm since it is assumed that the ocean is totally absorbing in a band of wavelengths around 750 nm. The calculation of this ratio from satellite measurements alone and the accuracy of the procedure are considered.

Gordon, H. R.↗
NASA NTRS1977

Design, fabrication and expected performance of the HEAO-B X ray telescope

The X-ray telescope of the second High Energy Astronomy Observatory (HEAO-B) is described. The design consists of four concentric paraboloid/hyperboloid pairs. Focal length is 3.44 meters, paraboloid diameters vary from 580-336 mm, grazing angles vary from 70 to 40 arcmin for paraxial rays, segment lengths are 511 mm. The reflecting surfaces are nickel-coated fused quartz and the resolution is limited by assembly errors (for small field angles) and design aberrations (for large field angles). The local slope, roundness, and surface roughness are identified as the primary optical tolerances connected with the individual elements.

Van Speybroeck, L. P.↗
NASA NTRS1977

Reevaluation of the Apollo orbital X-ray fluorescence data

A combination of Al/Mg ratios and Al/Si ratios has provided high-quality geochemical and geological information from the Apollo orbital X-ray fluorescence data. The high sensitivity of the characteristic Si X-rays to alterations in the energy spectra of the solar X-ray flux limits the analytical usefulness of the ratios involving Si. A photometric study indicates that the Si concentration in lunar materials varies by less than about + or - 15% of the Si present. In addition, particle size and surface roughness are shown to have small effects on the characteristic fluorescent X-ray radiation of Si.

Hubbard, N. J.↗
NASA NTRS1978

Remote sensing of sea state by analysis of backscattered microwave phase fluctuations

The relative phase of a normally incident microwave signal scattered off the sea surface is a random function of space and time. The statistics of these random phase fluctuations contain information about the wave-height statistics. This study demonstrates that the wave-height spectra can be deduced directly in terms of the spectra of the phase fluctuations without recourse to inversion techniques even when surface roughness exceeds many wavelengths of the incident signal. In the particular case of a nadir-directed satellite-mounted microwave source operating in the backscatter mode, the wave-height and phase spatial spectra are proportional with a constant proportionality of (2k0) squared, where k0 is the wavenumber of the scattered signal.

Clifford, S. F.↗
NASA NTRS1979

Determination of lubricant selection based on elastohydrodynamic film thickness and traction measurement

The project was conducted to aid in the development of an elastohydrodynamic specification for military lubricants. Experiments were conducted with a rolling disk apparatus designed to simulate a bearing or gear type contact. Measurements included lubricant film thickness, lubricant breakdown and traction for a range of loads, speeds, temperatures, and surface roughnesses. Several lubricants were used in the investigations including a traction fluid, two synthetic paraffinic lubricants and several lubricants conforming to MIL-L 7808 and 23699 specifications. Recommendations regarding an EHD specification are included.

Dow, T. A.↗
NASA NTRS1979

Preliminary results of SAR soil moisture experiment, November 1975

The experiment was performed using the Environmental Research Institute of Michigan's (ERIM) dual-frequency and dual-polarization side-looking SAR system on board a C-46 aircraft. For each frequency, horizontally polarized pulses were transmitted and both horizontally and vertically polarized return signals were recorded on the signal film simultaneously. The test sites were located in St. Charles, Missouri; Centralia, Missouri; and Lafayette, Indiana. Each test site was a 4.83 km by 8.05 km (3 mile by 5 mile) rectangular strip of terrain. Concurrent with SAR overflight, ground soil samples of 0-to-2.5 cm and 0-to-15 cm layers were collected for soil moisture estimation. The surface features were also noted. Hard-copy image films and the digital data produced via optical processing of the signal films are analyzed in this report to study the relationship of radar backscatter to the moisture content and the surface roughness. Many difficulties associated with processing and analysis of the SAR imagery are noted. In particular, major uncertainty in the quantitative analysis appeared due to the difficulty of quality reproduction of digital data from the signal films.

Choudhury, B. J.↗
NASA NTRS1978

Section drag coefficients from pressure probe transverses of a wing wake at low speeds

An in-flight wing wake section drag investigation was conducted using traversing pitot and static probes. The primary objective was to develop measurement techniques and improve the accuracy of in-flight wing profile drag measurements for low values of dynamic pressure and Reynolds number. Data were obtained on a sailplane for speeds from about 40 knots to 125 knots at chord Reynolds numbers between 1,000,000 and 3,000,000. Tests were conducted with zero flap deflection, deflected flaps, and various degrees of surface roughness, and for smooth and rough atmospheric conditions. Several techniques were used to increase data reliability and to minimize certain bias errors. A discussion of the effects of a total pressure probe in a pressure gradient, and the effects of discrete turbulence levels, on the data presented and other experimental results is also included.

Montoya, L. C.↗
NASA NTRS1978

Dynamics of short eccentric plain seals with high axial Reynolds number

Plain seals with high axial flow rates produce large stiffness and damping coefficients that can help stabilize high-speed rotating machinery. When the shaft is eccentric in the seal, a Bernoulli effect low-pressure region occurs on the large-clearance side of the shaft. A fluid-restoring force tends to center the shaft and reduce vibrations. This work extends the previous theory for short plain centered seals to large eccentricities using a perturbation analysis. Surface roughness effects are also included. An analysis of seals used in the Space Shuttle main engine hydrogen fuel turbopump indicates the desirability of plain seals over the labyrinth type. Experimental results confirm this.

Allaire, P. E.↗