SEARCH · Engineering Papers
Results for “structure performance”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Scalable training of trustworthy and energy-efficient predictive graph foundation models for atomistic materials modeling: a case study with HydraGNN
We present our work on developing and training scalable, trustworthy, and energy-efficient predictive graph foundation models (GFMs) using HydraGNN, a multi-headed graph convolutional neural network architecture. HydraGNN expands the boundaries of graph neural network (GNN) computations in both training scale and data diversity. It abstracts over message passing algorithms, allowing both reproduction of and comparison across algorithmic innovations that define nearest-neighbor convolution in GNNs. This work discusses a series of optimizations that have allowed scaling up the GFMs training to tens of thousands of GPUs on datasets consisting of hundreds of millions of graphs. Our GFMs use multitask learning (MTL) to simultaneously learn graph-level and node-level properties of atomistic structures, such as energy and atomic forces. Using over 154 million atomistic structures for training, we illustrate the performance of our approach along with the lessons learned on two state-of-the-art US Department of Energy (US-DOE) supercomputers, namely the Perlmutter petascale system at the National Energy Research Scientific Computing Center and the Frontier exascale system at Oak Ridge Leadership Computing Facility. The HydraGNN architecture enables the GFM to achieve near-linear strong scaling performance using more than 2000 GPUs on Perlmutter and 16,000 GPUs on Frontier.
Digestion processes and elemental analysis of oxide and sulfide solid electrolytes
Detailed elemental analysis is essential for a successful development and optimization of material systems and synthesis methods. This is especially relevant for Li- and Na-containing compounds, found in state-of-the-art and next-generation battery systems. Their materials’ properties and thus the final device performance strongly depend on the crystal structure, the stoichiometry, and defect chemistry, e.g., influencing charge carrier concentration and activation energies for vacancy transport. However, a detailed quantitative analysis of light elements in a heavy matrix, featuring a broad range of solubilities and vapor pressures, is often difficult and associated with large uncertainties and thus neglected in favor of just reporting the stoichiometry as “weighed in.” Here, in this work, we report several approaches to digest and dissolve various oxide and sulfide-based materials, used in next-generation Li batteries, for elemental analysis via optical emission spectroscopy. These include the most common solid electrolytes Li-La-Ti–O, a perovskite material (LLTO), and Li-La-Zr-O which has garnet structure (LLZO). Additionally, a facile thermal digestion process is reported for a surrogate sulfide solid electrolyte (Na 2 S). The digestion procedures reported here are suitable for almost any laboratory environment and, when applied, will improve understanding of the synthesis-structure–property correlations needed to advanced batteries with all solid-state configurations.
Thermodynamics and Kinetics of Refractory Multi-principal Element Alloys: An Experimental and Modeling Comparison
Here, the search for structural alloys capable of ultrahigh temperature performance has led to the exploration of refractory multi-principal element alloys (RMPEAs). In this work, experimental results for solidification segregation and homogenization of two RMPEAs, NbTaTiW and MoNbTaTi, are compared to simulations using the Scheil and DICTRA modules in Thermo-Calc®. Scheil calculations accurately predict the observed solidification segregation, while DICTRA predicts general trends and can provide a minimum time to achieve homogenization at a given temperature.
Elucidating the temperature dependence of TRIP in Q&P steels using synchrotron X-Ray diffraction, constituent phase properties, and strain-based kinetics models
Understanding the deformation-induced martensitic transformation (DIMT) is critical for interpreting the structure-property relationships that govern the performance of transformation-induced plasticity (TRIP) assisted steels. However, modern TRIP-assisted steels often exhibit DIMT kinetics that are not easily captured by existing empirical models based on bulk tensile strain. We address this challenge by combined bulk uniaxial tensile tests and in-situ high energy synchrotron X-ray diffraction, which resolved the phase volume fractions, stress-strain response, and microstructure evolution of each constituent phase. A modification of the Olson-Cohen model is implemented, which describes the martensitic transformation kinetics as a function of the estimated partitioned strain in austenite, rather than the bulk tensile strain. This DIMT kinetic model is used as a framework to clarify the root cause of an insufficiently understood toughness trough reported for TRIP-assisted steels during deformation at elevated temperatures. Here, the importance of the temperature-dependent toughness is discussed, based on the opportunity to modify deformation processes to tailor the DIMT kinetics and mechanical properties during forming and in service.
Macroscale Control of Reactivity using 3D Printed Materials with Intrinsic Catalytic Properties
The morphology of heterogeneous catalysts can impact their performance. However, standard manufacturing methods like extrusion or pelleting offer little options for tailoring catalyst shape. Herein, stereolithographic 3D printing is used to produce catalysts with controlled topologies to enhance their performance. A series of magnetic stir-bar compartments (SBC) were 3D printed and tested as catalysts for sucrose hydrolysis. The SBC were printed using acrylic acid (AA) and 1,6-hexanediol diacrylate (HDDA) as acid sites and hydrophobic crosslinking domains, respectively. Variations in the number and tilt direction of the SBC blades produced significant changes in their apparent catalytic activities. These changes resulted from differences in the fraction of active surface effectively interacting with the reactants in solution, as revealed by computational fluid dynamics simulations. Moreover, varying HDDA:AA ratios in SBC regulated reactant-surface interactions to control catalytic activity. Overall, 3D printing catalysts enables quick performance optimization by simultaneously controlling macroscopic structure and molecular composition.
Low-dimensional carbon materials decorated FAPbI 3 for carbon-based perovskite solar cells
Carbon nanomaterials are at the forefront of research in perovskite solar cells (PSCs) due to their exceptional electrical, optical, and stability properties. Their diverse applications include serving as interfacial layers, additives, hole and electron transport materials, and back electrodes. While the influence of various low-dimensional carbon nanomaterial structures on crystallinity, optical and electrical performance, and overall device efficiency has been a topic of interest, it has not been thoroughly explored until now. In this study, we effectively integrated carbon quantum dots (CQDs), multi-walled carbon nanotubes (MWCNTs), and graphene into the FAPbI 3 photoactive layer using a two-step sequential deposition method. Our experiments revealed marked improvements in the photovoltaic performance of PSCs that incorporated all three types of carbon nanomaterials. In particular, the data shows significant enhancements in power conversion efficiency, demonstrating the effectiveness of these materials in optimizing device functionality. Notably, MWCNTs distinguished themselves by exhibiting a remarkable potential for enhancing long-term stability. This finding underscores the importance of selecting the right carbon nanomaterials for future PSC developments, paving the way for more reliable and efficient solar energy solutions. As a result, our research highlights the critical role of carbon nanomaterials in advancing perovskite solar technology.
Changes in microbial community and network structure precede shrub degradation in a desert ecosystem
Large-scale restoration is intended to promote ecological recovery. Improvements in plant and microbial conditions, however, may slow or even reverse in late succession. To better understand long-term restoration outcomes and underlying drivers of successional pathways, we tracked plant, bacterial and fungal, and soil conditions across a 40-year shrub plantation that was intended to stabilize desertified land in northern China. Here, we found that planted Haloxylon ammodendron shrubs developed and then subsequently became degraded after 30–40 years. Bacterial abundance and α-diversity were much higher than those of fungi, but no significant differences in composition and structure were found in different plantation ages. In contrast, the dominant taxa of fungal communities shifted from symbiotroph and saprotroph species towards pathotroph species with increased soil nutrients in the plantation chronosequence after two decades. The changes in fungal dominant species led to a transition in microbial network structure and function, with an increase in negative linkages among taxa that began in the middle stages of succession. Changes in fungal community structure had direct and indirect negative effects on shrub leaf physiology, root activity, and biomass. Our results highlight the preceding role of a breakdown in soil microbial community composition and network structure on the degradation of shrub performance in long-term desert succession. Our study emphasizes the importance of understanding soil-microbial-plant linkages on restoration outcomes, and mechanisms that can slow or reverse the recovery of ecosystems.
Novel processing route for design and manufacturing of metal toughened nanoceramics: Al–Al 2 O 3 nanocermets
Monolithic alumina is a highly brittle ceramic with a very low fracture toughness, making it an unreliable material for mechanical and structural applications. Ceramic-metal composites (cermets) are the subject of intensive interest to obtain materials which can address the intrinsic brittleness of ceramics without compromising their high strength and light weight. In the present investigation, aluminium-alumina (Al–Al 2 O 3 ) nanocermets were developed. The nanocermets possessed the toughness of Al phase and the strength of reinforced nano Al 2 O 3 particles. Here, the nanocermets green bodies were prepared such that upon sintering each adjacent Al 2 O 3 grain was conformally coated with a continuous Al film. Mechanical milling via a combination of cryo-milling and ball-milling was used to prepare Al–Al 2 O 3 nano-powder mixture. Spark plasma sintering was used to consolidate the green nanocermets. Results show that specimens prepared from 35 h milled powders exhibited superior mechanical properties as compared to other nanocermets, with an improvement in microhardness, elastic modulus, compressive strength, and flexural strength by 88%, 78%, 69% and 40% with respect to sintered pure Al. The indentation toughness of 35 h milled nanocermet showed an increment of 12.5% with respect to sintered pure Al 2 O 3 . Characterization techniques such as XRD, SEM, HR-TEM, X-ray tomography were employed to investigate the phase evolution and structural morphology, while FEM simulations were performed for understanding the crack propagation mechanisms in nanocermets.
Data-driven methods for diffusivity prediction in nuclear fuels
The growth rate of structural defects in nuclear fuels under irradiation is intrinsically related to the diffusion rates of the defects in the fuel lattice. The generation and growth of atomistic structural defects can significantly alter the performance characteristics of the fuel. This alteration of functionality must be accurately captured to qualify a nuclear fuel for use in reactors. Predicting the diffusion coefficients of defects and how they impact macroscale properties such as swelling, gas release, and creep is therefore of significant importance in both the design of new nuclear fuels and the assessment of current fuel types. In this article, we apply data-driven methods focusing on machine learning (ML) to determine various diffusion properties of two nuclear fuels—uranium oxide and uranium nitride. We show that using ML can increase, often significantly, the accuracy of predicting diffusivity in nuclear fuels in comparison to current analytical models. We also illustrate how ML can be used to quickly develop fuel models with parameter dependencies that are more complex and robust than what is currently available in the literature. In conclusion, these results suggest there is potential for ML to accelerate the design, qualification, and implementation of nuclear fuels.
Effect of pinholes in Nb 4 C 3 MXene sheets on its electrochemical behavior in aqueous electrolytes
Two-dimensional (2D) niobium carbide, Nb 4 C 3 T x (T x : O, OH, and F), a representative member of the 43 MXene structural motif, has shown promising electrochemical performance in acidic electrolytes. The capacitive performance of Nb 4 C 3 T x in neutral aqueous electrolytes has been reported as moderate, but little effort has been made to improve it. In this paper, we report a method to introduce nanopores (pinholes) in Nb 4 C 3 T x MXene flakes by adjusting the etching time. The pinholes generated during the etching process improve ion diffusion pathways, which are otherwise hindered by the restacking of the 2D flakes. The “holey Nb 4 C 3 T x ” shows a 50 % improved rate capability at charge/discharge time scales of 1–2 s in 1 M Li 2 SO 4 , Na 2 SO 4 , and (NH 4 ) 2 SO 4 electrolytes. Our strategy of controlling the permeability of Nb 4 C 3 T x sheets can potentially be applied to other MXenes, providing guidance for improving the capacitance and rate capability of 2D materials.
Impact of non-irrigation on 1G and 2G bioethanol potential of oilcane feedstock: A field to fuel pipeline study
This study evaluates the bioethanol potential in response to irrigation (IR) and non-irrigation (NIR) of oilcane (OC) during a seasonal drought prior harvest. The juice was extracted through mechanical pressing of stems and fermented by Ethanol Red® yeast to produce first-generation bioethanol. Hydrothermal pretreatment followed by enzymatic hydrolysis of bagasse was performed to produce monomeric sugars from structural carbohydrates. The hydrolysates were fermented with engineered yeast for second-generation bioethanol production. The irrigated oilcane juice (276.3 ± 8.9 g/L) constitutes higher sugar concentrations than non-irrigated oilcane juice (236.5 ± 2.2 g/L). The enzymatic hydrolysis of IR-OC and NIR-OC pretreated bagasse yielded similar concentrations of 247.5 ± 2.22 and 249.7 ± 4.98 g/L fermentable sugars. Industry-relevant bioethanol titers of ≥99 g/L and ≥75 g/L were achieved from juice and hydrolysates, respectively. Therefore, the non-irrigation regime did not impact the 1G and 2G bioethanol titers. However, the overall bioethanol yield can be lower due to the reduction of stem yield (8 %) per hectare.
Experimental evaluation of thermal-fluids performance of Helium-Cooled Flat Plate (HCFP) divertor
Various helium (He)-cooled solid-tungsten (W) divertor concepts have been proposed for long-pulse magnetic fusion energy reactors. Among these concepts, the He-cooled flat plate divertor (HCFP) modules have the largest plasma-facing surface area of ~0.2 m 2 . Simulations have shown that the most recent version of the design can withstand heat fluxes as great as 8 MW/m 2 . Earlier experimental studies of a single shortened HCFP cooling unit with a slot length of 7.6 cm used air at ambient temperature and pressures below 0.6 MPa. Here, we present initial experimental studies of a copper alloy and steel test section modeling a shortened HCFP cooling unit using He at prototypical pressure of 10 MPa, inlet temperatures T i ≤ 200 °C and steady-state incident heat fluxes q" ≤ 1.2 MW/m 2 . Results for Nusselt number Nu as a function of Reynolds number Re were obtained for Re = 1.2×10 4 –3.4×10 4 , and used to develop a Nu(Re) correlation and validate numerical models of the test section using commercial computational fluid dynamics (CFD) software. Simulations with this model are performed to evaluate the effect of the shortened slot. Furthermore, these analyses are used to estimate the thermal-fluids performance of the HCFP under prototypical conditions.
Direct aromatization of CO 2 via combined CO 2 hydrogenation and zeolite-based acid catalysis
Aromatics, including benzene, toluene, and xylenes (BTX), are essential chemical building blocks and are widely used as solvents, fuel additives, and polymers. With the recent development in CO 2 capture technologies and the progress made in producing H 2 using renewable energy, direct hydrogenation of CO 2 to aromatics via heterogeneous catalysis has emerged as a promising pathway to accomplish the production of aromatics with simultaneous utilization of waste CO 2 . In this review, we focus on recent advances in the nascent field of direct CO 2 aromatization, whereby tandem catalysts composed of CO 2 hydrogenation and aromatization functionalities are designed and deployed. We review two categories of tandem catalysts: catalysts integrating Fe-based/H-ZSM-5 components following RWGS (reverse water-gas shift of CO 2 to CO)-FT (Fischer-Tropsch synthesis of lower olefins)-aromatization pathways, and catalysts combining metal oxide/H-ZSM-5 domains following CO 2 to methanolaromatization pathways. The key parameters that determine the catalytic performance, such as the composition and structure of the Fe-based or metal oxide-based CO 2 conversion catalysts, the properties of H-ZSM-5, and the synergy between the two components, are analyzed to provide insights for the design of efficient tandem catalysts for CO 2 aromatization. In parallel, thermodynamic analyses, mechanistic studies, and density functional theory (DFT) computations for the relevant reaction routes and pathways are discussed to offer improved understanding of CO 2 activation, reaction intermediates, and product formation. In closing, the challenges and prospects for these tandem reactions are addressed to provide suggested paths forward for future research.
Microstructure Evolution of U–Zr System in A Thermal Cycling Neutron Diffraction Experiment: Extruded U–10Zr (wt. %)
Microstructure evolution of 1073 K extruded U–10Zr (wt. %) fuel during thermal cycling (303–1073 K with a ~9 hour hold at 873 K during cooling) was investigated using in situ neutron diffraction. Analysis was performed using Rietveld texture and crystal structure refinements from time–of–flight neutron diffraction data, with a focus on the evolution of textures and lattice parameters as a function of temperature. The α–U phase exhibits lattice contraction with increasing temperature along the b lattice direction and lattice expansion in the other directions while the other phases exhibit lattice expansion with temperature in all directions. Contrary to the established phase diagram, the β–U phase is absent at the temperatures of the thermal cycling. (001) α and (110) γ plane normals are observed with a strong preferred orientation along the extrusion direction. Finally, the variant selection of (001) α ||(110) γ is observed for the first time.
Contributions to the mechanistic understanding of the microstructural evolution in irradiated U-Mo dispersion fuel
Here, advanced microstructural characterization techniques, such as scanning electron microscopy (SEM) and scanning transmission electron microscopy - energy dispersive x-ray spectroscopy (STEM-EDS), were used to interpret the fuel microstructure evolution and fission products behavior in U-Mo dispersion fuel irradiated in the Advanced Test Reactor (ATR) as part of the European Mini-Plate Irradiation Experiment (EMPIrE) test. The larger as-fabricated fuel grain size achieved by heat-treating the U-Mo powder resulted in slower high burnup structure (HBS) development and reduced fission gas porosity. Slower HBS kinetics was observed at the fuel kernels’ periphery, which contained smaller and less fission gas bubbles at all fission densities (FDs) investigated and was attributed to a locally reduced damage density and fission products concentration, as corroborated with Monte Carlo simulations. The non-refined grains at the fuel kernel periphery hosted a perfectly ordered fission Gas Bubble Superlattice (GBS) up to 6.3 × 10 21 fissions/cm 3 . Nano-scale STEM-EDS analysis presented in this study provided useful information on the GBS characteristic morphology and evolution in U-Mo fuel. The concentration of fission gas in the GBS progressively increased with FD, pointing to an evolution of the nanobubble pressure status with irradiation. A possible connection between the GBS collapse and HBS onset is proposed for which there exists a threshold in the misorientation of the refined sub-grains above which the GBS stability during irradiation is no longer preserved, resulting in the GBS collapse.
State of the art, gaps, and prospects in fusion materials theory and modelling
Advancing the theory and simulation of materials for fusion applications remains a key component of global roadmaps aimed at delivering much-needed fusion power. Especially as the drive for commercial application increases, prototypes must be designed against radiation damage before the relevant experimental data can be collected and cost reductions that are possible by testing materials in silico become even more important. Here, we summarise the state of the art as it emerged during the 7 th Fusion Materials Theory & Modelling Workshop that took place in 2024, with the aim to highlight present gaps and future directions for the fusion materials modelling community. Of particular interest were the effects of transmutations, chemical complexity with the development of novel alloys and interatomic potentials, advancements in modelling high-dose microstructures, comparison with experimental data and multiscale models for structural assessment relying on high-performance computing and virtual reality.