Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Shadowed Space Heating of Sparse Structures

Complete heat-flux and temperature maps computed. Computer program SSQ developed to address and quantify complex, solar-shadowing conditions inherent in sparse, lattice-type space structures. Analysis procedure one of assessing partial shadowing of structural elements by multiple, similar slender members. Program yields schedules of incident-solar, Earth-thermal, and Earth-albedo radiation throughout complete orbit for elemental locations on selected structural members. Thermal response computed in optional routine. Complete heat-flux and temperature mapping obtained by repeated computations for selected elements of interest.

Oneill, J. L.↗

Development of the Learjet 28/29 Wing Using NASTRAN Analysis

The structural development work performed on the Learjet 28/29 wing using NASTRAN analysis is discussed. The work included the basic sizing of primary structural members such as wing skins, wing skin splices, and spar caps, as well as the calculation of preliminary weight estimates utilizing the weight computation routine in NASTRAN. The eight spar redundancy of the Learjet wing made this task somewhat more complex than for more determinate type wing structures. Some of the problems that were encountered and the solutions and methods that were used are described.

Boroughs, R. R.↗

Flight loads and control

The prediction of flight loads and their potential reduction, using various control logics for the space shuttle vehicles, is very complex. Some factors, not found on previous launch vehicles, that increase the complexity are large lifting surfaces, unsymmetrical structure, unsymmetrical aerodynamics, trajectory control system coupling, and large aeroelastic effects. Discussed are these load producing factors and load reducing techniques. Identification of potential technology areas is included.

Mowery, D. K.↗

A comparison of the capabilities of three finite element programs

Three finite element programs are compared to assess their capabilities as an analysis tool in a structural design process. Because of the need for repetitive analyses as an integral part of a design loop, a candidate program must be capable of handling large problems, operate efficiently, and be readily adaptable for use in computer-aided design. The three programs considered in the study, ELAS,SNAP, and NASTRAN, range from a relatively small finite element program limited to static structural analysis (ELAS) to a large complex general analysis system (NASTRAN). Results are given for comparative speeds and computer resources required for each program in the analysis of sample fuselage problems representative of practical aircraft design.

Loendorf, D. D.↗

Large-scale systems: Complexity, stability, reliability

After showing that a complex dynamic system with a competitive structure has highly reliable stability, a class of noncompetitive dynamic systems for which competitive models can be constructed is defined. It is shown that such a construction is possible in the context of the hierarchic stability analysis. The scheme is based on the comparison principle and vector Liapunov functions.

Siljak, D. D.↗

Composition and structure of Mars' upper atmosphere - Results from the neutral mass spectrometers on Viking 1 and 2

The upper atmospheric mass spectrometers flown on Viking 1 and 2 are described, and results obtained for the composition and structure of Mars' upper atmosphere are summarized. Carbon dioxide is the major constituent of the atmosphere at all heights below 180 km. The thermal structure of the upper atmosphere is complex and variable with average temperatures below 200 K for both Viking 1 and 2. The atmosphere is mixed to heights in excess of 120 km. The isotopic composition of carbon and oxygen in the Martian atmosphere is similar to that in the terrestrial atmosphere: N-15 is enriched in Mars' atmosphere by a factor of 1.62 + or - 0.16.

Nier, A. O.↗

Offset weap rib concept and development

The applicability of the Wrap rib antenna design for offset feed configurations for antennas up to 300 m in diameter was assessed. The antenna design was defined for both symmetric and offset configurations in terms of surface quality, cost, weight, and mechanical complexity. A supporting deployable feed support structure was developed and characterized.

Woods, A. A., Jr.↗

The large-scale far-infrared structure of W3 and W4

The large-scale structure of the giant H II region complex W3/W4 has been mapped in two wavelength bands covering 60 to 120 microns at an angular resolution of 12 arc min. The only region of strong emission observed lies along a molecular ridge at an ionization/shock front in the sources. This structure supports the idea that a new generation of stars formed after neutral material ahead of the front became gravitationally unstable. These embedded stars are dominating the energetics of the molecular/infrared cloud, although the visible OCl 352 cluster in neighboring IC 1805 may supply much of the heating flux to the fainter regions. A simple model relating the far-infrared and CO emission is presented.

Thronson, H. A., Jr.↗

Definition, analysis and development of an optical data distribution network for integrated avionics and control systems

The potential and functional requirements of fiber optic bus designs for next generation aircraft are assessed. State-of-the-art component evaluations and projections were used in the system study. Complex networks were decomposed into dedicated structures, star buses, and serial buses for detailed analysis. Comparisons of dedicated links, star buses, and serial buses with and without full duplex operation and with considerations for terminal to terminal communication requirements were obtained. This baseline was then used to consider potential extensions of busing methods to include wavelength multiplexing and optical switches. Example buses were illustrated for various areas of the aircraft as potential starting points for more detail analysis as the platform becomes definitized.

Burns, R. R.↗

Peculiarities of spectra of induced emission of polymethine dye solutions at low temperatures

Results from studying the induced emission spectra with monochromatic excitation (superluminescent regime) within a temperature range of 300 K - 5.2 K are presented. The significant feature of such operations is the appearance of quasi-lines whose minimum width is realized at 4.2 K. The frequency distribution of the quasi-lines unambiguously characterizes the dye investigated. When interpreting these results, the idea of an inhomogeneous broadening of the polymethine dye spectra in the solution being studied experimentally was used for the first time. The quasi-lines observed are interpreted as a manifestation of the electron vibration structure of singlet states of a complex molecule.

Melishchuk, M. V.↗

Design of helicopter rotor blades for optimum dynamic characteristics

The possibilities and the limitations of tailoring blade mass and stiffness distributions to give an optimum blade design in terms of weight, inertia, and dynamic characteristics are investigated. Changes in mass or stiffness distribution used to place rotor frequencies at desired locations are determined. Theoretical limits to the amount of frequency shift are established. Realistic constraints on blade properties based on weight, mass moment of inertia size, strength, and stability are formulated. The extent hub loads can be minimized by proper choice of EL distribution is determined. Configurations that are simple enough to yield clear, fundamental insights into the structural mechanisms but which are sufficiently complex to result in a realistic result for an optimum rotor blade are emphasized.

Peters, D. A.↗

A high-resolution X-ray image of Puppis A - Inhomogeneities in the interstellar medium

Eleven HRI exposures from the Einstein Observatory are assembled into an 0.1-4 keV image of the Puppis A supernova remnant which displays a complex morphology that may reflect the structure of the shocked interstellar medium. In addition to showing a density gradient of a factor greater than four across the approximately 30 pc diameter of the remnant perpendicular to the galactic plane, a shell of X-ray emission is seen surrounding the northern half of Puppis A, coincident with the radio shell, whose edge brightness profile indicates direct hot plasma heating by the blast wave rather than evaporation from clouds. The interior structure of the supernova remnant suggests inhomogeneities whose sizes range over 0.1-5 pc, but with moderate density contrast. Although isolated clouds of 10-30/cu cm density are responsible for the two brightest X-ray features, they represent only a small fraction of the Puppis A mass.

Petre, R.↗

Wave scattering and guidance by dielectric waveguides with periodic surfaces

The extended-boundary-condition method is used to solve the wave scattering and guidance by a stratified medium with a periodic surface. First, the transition matrix for two sets of Flocquet waves incident from above and below a periodic surface separating the two media is derived. The results are applied to the diffraction of an incident plane wave by a multilayered medium having a periodic surface. The theoretical results can easily be applied to the guidance problem for which the complex guiding constant of the periodic structure is obtained. Numerical results for both the scattering and the guidance problems are obtained. The theory is compared with experiment for metallic gratings with surface-plasmon excitations. The calculated guiding constants of a thin film with a periodic sinusoidal surface are also compared with other numerical methods.

Chuang, S. L.↗

Attitude control and stability of a Space Station

Certain problems arise in connection with the design and construction of a Space Station. These problems are partly related to the impossibility to predict in advance the ultimate form and size which the Space Station will assume. Due to the abatement of volume and strength constraints it will be desirable (for maximum utility of mass) to permit very low structural resonance frequencies, and due to complexity of the configuration there will be an extremely high density of modal frequencies. The basic approaches available to an attitude control system designer for coping with the dynamics of a plant with the considered characteristics are examined. In order to overcome difficulties related to a use of currently widely considered approaches, a technique is proposed whereby the degrees of freedom requiring active control are isolated mechanically from other superfluous vibratory modes.

Peters, W. H.↗

Operating systems

A counter operating system creates a hierarchy of levels of abstraction, so that at a given level all details concerning lower levels can be ignored. This hierarchical structure separates functions according to their complexity, characteristic time scale, and level of abstraction. The lowest levels include the system's hardware; concepts associated explicitly with the coordination of multiple tasks appear at intermediate levels, which conduct 'primitive processes'. Software semaphore is the mechanism controlling primitive processes that must be synchronized. At higher levels lie, in rising order, the access to the secondary storage devices of a particular machine, a 'virtual memory' scheme for managing the main and secondary memories, communication between processes by way of a mechanism called a 'pipe', access to external input and output devices, and a hierarchy of directories cataloguing the hardware and software objects to which access must be controlled.

Denning, P. J.↗

The calculation of theoretical chromospheric models and the interpretation of solar spectra from rockets and spacecraft

Solar chromospheric models are described. The models included are based on the observed spectrum, and on the assumption of hydrostatic equilibrium. The calculations depend on realistic solutions of the radiative transfer and statistical equilibrium equations for optically thick lines and continua, and on including the effects of large numbers of lines throughout the spectrum. Although spectroheliograms show that the structure of the chromosphere is highly complex, one-dimensional models of particular features are reasonably successful in matching observed spectra. Such models were applied to the interpretation of chromospheric observations.

Avrett, E. H.↗

Operational fitness of box truss antennas in response to dynamic slewing

A parametric study was performed to define slewing capability of large satellites along with associated system changes or subsystem weight and complexity impacts. The satellite configuration and structural arrangement from the Earth Observation Spacecraft (EOS) study was used as the baseline spacecraft. Varying slew rates, settling times, damping, maneuver frequencies, and attitude hold times provided the data required to establish applicability to a wide range of potential missions. The key elements of the study are: (1) determine the dynamic transient response of the antenna system; (2) calculate the system errors produced by the dynamic response; (3) determine if the antenna has exceeded operational requirements at completion of the slew, and if so; (4) determine when the antenna has settled to the operational requirements. The slew event is not considered complete until the antenna is within operational limits.

Bachtell, E. E.↗

Recent thermal models of the chromosphere

The paper describes recent research on the calculation of solar chromospheric models. The models included here are based on the observed spectrum, and on the assumption of hydrostatic equilibrium. The calculations depend on realistic solutions of the radiative transfer and statistical equilibrium equations for optically thick lines and continua, and on including the effects of large numbers of lines throughout the spectrum. Although spectroheliograms show that the structure of the chromosphere is highly complex, one-dimensional models of particular features are reasonably successful in matching observed spectra. There has been considerable recent progress in applying such models to the interpretation of chromospheric observations.

Avrett, E. H.↗