Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “program design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Separator development and testing of nickel-hydrogen cells

The components, design, and operating characteristics of Ni-H2 cells batteries were improved. A separator development program was designed to develop a separator that is resistant to penetration by oxygen and loose active material from then nickel electrode, while retraining the required chemical and thermal stability, reservoir capability, and high ionic conductivity. The performance of the separators in terms of cell operating voltage was to at least match that of state-of-the-art separators while eliminating the separator problems. The separators were submitted to initial screening tests and those which successfully completed the tests were built into Ni-H2 cells for short term testing. The separators with the best performance are tested for long term performance and life.

Gonzalez-Sanabria, O. D.↗

Mod II Stirling engine overviews

The Mod II engine is a second-generation automotive Stirling engine (ASE) optimized for part-power operation. It has been designed specifically to meet the fuel economy and exhaust emissions objectives of the ASE development program. The design, test experience, performance, and comparison of data to analytical performance estimates of the Mod II engine to date are reviewed. Estimates of Mod II performance in its final configuration are also given.

Farrell, Roger A.↗

Satellite Servicer System flight demonstration program

The major hardware elements, demonstration objectives, and technical approaches, as well as existing and developing technologies for applicability to the Satellite Servicer System (SSSFD) program are presented. In a project to develop the capability of servicing satellites in remote locations, NASA and SDI have planned a series of flights to demonstrate autonomous rendezvous and docking, supervised autonomous fluid transfer, and supervised autonomous orbital replacement unit exchange. Program objectives, design reference mission, and flight demonstrations are described. The expanded capability demonstrated by the SSSFD program will provide alternatives to excessive dependence on ground operations personnel and training, increase the reach into unique space environments, and decrease the costs of managing and operating space assets.

Moore, James S.↗

Space Station Freedom cupola definition

Following the realization that adequate Space Station Freedom viewing could not be achieved without breaking the plane of the modules, a conceptual design phase for the development of a cupola progressed from the idea of a small, bubble-type canopy to a much larger, two crewmember cupola. The evolving cupola conceptual designs were each evaluated against the requirements for providing a large field-of-view, a complete proximity control workstation with flexible and relocatable restraints, and sufficient volume for two, 95th percentile crewmembers to operate while still maintaining reasonable weight and size restrictions. As the SS Freedom program Preliminary Design Review draws closer, the cupola development phase shifts toward evaluation of viewing and operational capability. The appropriate balance of viewing, structures and operations must be achieved before the program can place confidence in a cupola design providing SS Freedom with a direct viewing workstation capable of supporting the great variety of tasks projected for the life of the station.

Weaver, Laurie A.↗

Large Payload Ground Transportation and Test Considerations

Many spacecraft concepts under consideration by the National Aeronautics and Space Administration’s (NASA’s) Evolvable Mars Campaign take advantage of a Space Launch System payload shroud that may be 8 to 10 meters in diameter. Large payloads can theoretically save cost by reducing the number of launches needed--but only if it is possible to build, test, and transport a large payload to the launch site in the first place. Analysis performed previously for the Altair project identified several transportation and test issues with an 8.973 meters diameter payload. Although the entire Constellation Program—including Altair—has since been canceled, these issues serve as important lessons learned for spacecraft designers and program managers considering large payloads for future programs. A transportation feasibility study found that, even broken up into an Ascent and Descent Module, the Altair spacecraft would not fit inside available aircraft. Ground transportation of such large payloads over extended distances is not generally permitted, so overland transportation alone would not be an option. Limited ground transportation to the nearest waterway may be possible, but water transportation could take as long as 67 days per production unit, depending on point of origin and acceptance test facility; transportation from the western United States would require transit through the Panama Canal to access the Kennedy Space Center launch site. Large payloads also pose acceptance test and ground processing challenges. Although propulsion, mechanical vibration, and reverberant acoustic test facilities at NASA’s Plum Brook Station have been designed to accommodate large spacecraft, special handling and test work-arounds may be necessary, which could increase cost, schedule, and technical risk. Once at the launch site, there are no facilities currently capable of accommodating the combination of large payload size and hazardous processing such as hypergolic fuels, pyrotechnic devices, and high pressure gasses. Ironically, the limiting factor to a national heavy lift strategy may not be the rocket technology needed to throw a heavy payload, but rather the terrestrial infrastructure—roads, bridges, airframes, and buildings—necessary to transport, acceptance test, and process large spacecraft. Failure to carefully consider where and how large spacecraft are manufactured, tested, and launched could result in unforeseen cost to modify existing (or develop new) infrastructure, or incur additional risk due to increased handling operations or eliminating key verifications. Although this paper focuses on the canceled Altair spacecraft as a case study, the issues identified here have wide applicability to other large payloads, including concepts under consideration for NASA’s Evolvable Mars Campaign.

Rucker, Michelle A.↗

Advanced Durability and Damage Tolerance Design and Analysis Methods for Composite Structures: Lessons Learned from NASA Technology Development Programs

Aerospace vehicles are designed to be durable and damage tolerant. Durability is largely an economic life-cycle design consideration whereas damage tolerance directly addresses the structural airworthiness (safety) of the vehicle. However, both durability and damage tolerance design methodologies must address the deleterious effects of changes in material properties and the initiation and growth of microstructural damage that may occur during the service lifetime of the vehicle. Durability and damage tolerance design and certification requirements are addressed for commercial transport aircraft and NASA manned spacecraft systems. The state-of-the-art in advanced design and analysis methods is illustrated by discussing the results of several recently completed NASA technology development programs. These programs include the NASA Advanced Subsonic Technology Program demonstrating technologies for large transport aircraft and the X-33 hypersonic test vehicle demonstrating technologies for a single-stage-to-orbit space launch vehicle.

Harris, Charles E.↗

Stirling engine design manual, 2nd edition

This manual is intended to serve as an introduction to Stirling cycle heat engines, as a key to the available literature on Stirling engines and to identify nonproprietary Stirling engine design methodologies. Two different fully described Stirling engines are discussed. Engine design methods are categorized as first order, second order, and third order with increased order number indicating increased complexity. FORTRAN programs are listed for both an isothermal second order design program and an adiabatic second order design program. Third order methods are explained and enumerated. In this second edition of the manual the references are updated. A revised personal and corporate author index is given and an expanded directory lists over 80 individuals and companies active in Stirling engines.

Martini, W. R.↗

Design aspects of the XV-15 advanced technology blade program

The paper discusses the design of a tiltrotor blade for application to the XV-15 research demonstration aircraft. The design features 43 deg nonlinear twist and nonuniform tapered planform. The structure is composite with extensive use of graphite in the primary structure. Instrumentation and wiring is encapsulated in the composite structure during the cure cycle. The tip shell is removable, providing access to the tracking and balance weights. This feature provides research facility of alternate tip configurations. The cuff is similarly removable. The graphite epoxy system used is high strain American Cyanamid's Celion 6000ST/Cycom 950. This is the first application of this material in rotor blades.

Smith, K. E.↗

Shell theory automated for rotational structures

Package of numerical integration programs static, buckling, vibration, and plastic analysis on thin sheels of revolution. Sheels may be subjected to distributed loads, concentrated line loads, and thermal strain. Outputs include stresses, displacement, plastic strains, and vibration and buckling results. Program aids design of aircraft bodies, spacecraft, submarines, and storage tanks. Written in FORTRAN IV for batch execution, program has been implemented on UNIVAC 1108.

Key, J.↗

Separator development and testing of nickel-hydrogen cells

The components, design, and operating characteristics of Ni-H2 cells and batteries were improved. A separator development program was designed to develop a separator that is resistant to penetration by oxygen and loose active material from the nickel electrode, while retaining the required chemical and thermal stability, reservoir capability, and high ionic conductivity. The performance of the separators in terms of cell operating voltage was to at least match that of state-of-the-art separators while eliminating the separator problems. The separators were submitted to initial screening tests and those which successfully completed the tests were built into Ni-H2 cells for short term testing. The separators with the best performance are tested for long term performance and life.

Gonzalez-Sanabria, O. D.↗

GaussFit - A system for least squares and robust estimation

GaussFit is a new computer program for solving least-squares and robust estimation problems. It has a number of unique features, including a complete programming language designed especially to formulate estimation problems, a built-in compiler and interpreter to support the programming language, and a built-in algebraic manipulator for calculating the required partial derivatives analytically. These features make GaussFit very easy to use, so that even complex problems can be set up and solved with minimal effort. GaussFit can correctly handle many cases of practical interest: nonlinear models, exact constraints, correlated observations, and models where the equations of condition contain more than one observed quantity. An experimental robust estimation capability is built into GaussFit so that data sets contaminated by outliers can be handled simply and efficiently.

Jefferys, W. H.↗

Preliminary Study of Relationships between Stability and Control Characteristics and Affordability for High-Performance Aircraft

This paper describes a study that is being done as part of the Methods for Affordable Design (MAD) program within the National Aeronautics and Space Administration (NASA), for which the goal is to develop design methods and information that contribute to reductions in the aircraft development cycle time while increasing design confidence throughout the design cycle. The product of the study will be a database of information that relates key stability and control parameters to affordability considerations such as air combat exchange ratio, safety of flight, and probability of loss of the aircraft or pilot. The overall background and methodology are described, and preliminary results are shown for the first phase of the study to evaluate characteristics in the longitudinal axis. For these preliminary results a simplified analytical model of the aircraft response to uncommanded nose-up pitching moments was developed and used to characterize the requirements for recoveries to controlled flight conditions and to evaluate some parameters that affect the survivability of the aircraft and the pilot.

High performance aircraft↗

Safety Design Strategy for the Transformational Research Reactor

The Department of Energy Office of Nuclear Energy is embarking on the Transformational Challenge Reactor (TCR) program to demonstrate application of advanced technologies in enabling rapid and cost effective deployment of nuclear power systems. The TCR program will design, manufacture, and operate a small nuclear reactor at the Oak Ridge National Laboratory incorporating advanced manufacturing. DOE Order 420.1C requires the integration of safety in the design process. Therefore, the general approach in DOE-STD-1189 as described in this Safety Design Strategy is applied to the project to establish requirements for safety design for the resultant Categorized Nuclear Facility/Activity and to ultimately allow the Department of Energy to authorize operation of the facility.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Evolution of escape systems for manned space flight.

Detailed outline of the research, development, and actual operational usage of emergency systems starting with the X-15 program and continuing through the early Mercury, Gemini, and Apollo programs into future space station and planetary missions. The changing nature of the risk that confronts space flight system designers as program objectives are expanded is discussed. It is shown how risk complexity increased as space programs moved from a ballistic or low earth orbit mission on to lunar and ultimately planetary research efforts. Performance criteria for those emergency systems that have been designed are included. Aspects of feasibility are considered.

Bolger, P. H.↗

Equation modifying program, L219 (EQMOD). Volume 2: Supplemental system design and maintenance document

A digital computer program, L219 (EQMOD), available for execution on the CDC 6600 is described. The program modifies matrices according to card input instructions and prepares magnetic files of matrices suitable for use in the linear systems analysis program (QR) and the random harmonic analysis program L221 (TEV156). The particular field of application of the program is the modification of the theoretical equations of motion and load equations generated in DYLOFLEX by the equation of motion program (L217) and the load equation program (L218), respectively.

Hirayama, M. Y.↗

A global atmospheric model for aerospace applications

An empirical 4-D atmospheric model is described, whose ultimate goal is to give pressure, temperature, and density variables and their structure as a function of latitude, longitude, altitude, and the time domain (seasonal and perhaps time of day) over the altitude range from sea level to 185 km. The computer program combines the 4-D model of Siegler and Fowler (1972) for the range 0-25 km altitude, the modified Groves (1971) model for the range 30-90 km, and the Jacchia (1970) model for the range 115-185 km. Between 90 and 115 km, a smooth transition between the Groves values and Jacchia values was obtained by a fairing technique, while between 25 and 30 km an interpolation scheme was used between the 4-D results and the Groves values. The program is designed to give atmospheric parameter values along a simulated trajectory and a profile, such as a vertical profile at a single location. A set of trajectory positions for any desired trajectory, ascent or re-entry, can be input to the program for evaluation of atmospheric parameters for design purposes.

Justus, C. G.↗

AGC-2 Graphite Preirradiation Data Package

The NGNP Graphite R&D program is currently establishing the safe operating envelope of graphite core components for a Very High Temperature Reactor (VHTR) design. The program is generating quantitative data necessary for predicting the behavior and operating performance of the new nuclear graphite grades. To determine the in-service behavior of the graphite for pebble bed and prismatic designs, the Advanced Graphite Creep (AGC) experiment is underway. This experiment is examining the properties and behavior of nuclear grade graphite over a large spectrum of temperatures, neutron fluences and compressive loads. Each experiment consists of over 400 graphite specimens that are characterized prior to irradiation and following irradiation. Six experiments are planned with the first, AGC-1, currently being irradiated in the Advanced Test Reactor (ATR) and pre-irradiation characterization of the second, AGC-2, completed. This data package establishes the readiness of 512 specimens for assembly into the AGC-2 capsule.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Interface design of VSOP'94 computer code for safety analysis

Today, most software applications, also in the nuclear field, come with a graphical user interface. VSOP'94 (Very Superior Old Program), was designed to simplify the process of performing reactor simulation. VSOP is a integrated code system to simulate the life history of a nuclear reactor that is devoted in education and research. One advantage of VSOP program is its ability to calculate the neutron spectrum estimation, fuel cycle, 2-D diffusion, resonance integral, estimation of reactors fuel costs, and integrated thermal hydraulics. VSOP also can be used to comparative studies and simulation of reactor safety. However, existing VSOP is a conventional program, which was developed using Fortran 65 and have several problems in using it, for example, it is only operated on Dec Alpha mainframe platforms and provide text-based output, difficult to use, especially in data preparation and interpretation of results. We develop a GUI-VSOP, which is an interface program to facilitate the preparation of data, run the VSOP code and read the results in a more user friendly way and useable on the Personal 'Computer (PC). Modifications include the development of interfaces on preprocessing, processing and postprocessing. GUI-based interface for preprocessing aims to provide a convenience way in preparing data. Processing interface is intended to provide convenience in configuring input files and libraries and do compiling VSOP code. Postprocessing interface designed to visualized the VSOP output in table and graphic forms. GUI-VSOP expected to be useful to simplify and speed up the process and analysis of safety aspects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗