Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pointing control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Practical gust load alleviation and flutter suppression control laws based on a LQG methodology

A modified linear quadratic Gaussian (LQG) synthesis procedure has been used to design low-order robust multiloop controllers for a flexible airplane. The introduction of properly constructed fictitious Gauss-Markov processes in the control loops allowed meeting classical frequency-domain stability criteria using the direct synthesis procedures of modern time-domain control theory. Model reduction was used to simplify the control laws to the point where they could be easily implemented on onboard flight computers. These control laws provided excellent gust load and flutter mode control with good stability margins and compared very favorably to other control laws synthesized by the classical root-locus technique.

Gangsaas, D.↗

Shuttle navigation overview

Space Shuttle onboard navigation system tasks are related to position and velocity determination, attitude determination, sensor management, sensor Redundancy Management (RM), and navigation-related functions such as transformations, timing system utilization, and user processing for displays, guidance, and flight control. It is pointed out that Shuttle navigation is different in at least two areas from previous manned space flight navigation. The differences are related to the use of multiple units to provide protection from increased risk of failure of off-the-shelf-type equipment used for more than one flight, and the need to land at a runway. Attention is given to the navigation sensor system, the Shuttle Inertial Measurement Units, the Shuttle Star Tracker, the Crew Optical Alinement Sight, the Shuttle Tacan, the Air Data Subsystem, and aspects of navigation system mechanization.

Savely, R. T.↗

Electron acceleration by Landau resonance with whistler mode wave packets

Recent observations of electrostatic waves associated with whistler mode chorus emissions provide evidence that electrons are being trapped by Landau resonance interactions with the chorus. In this paper, the trapping, acceleration and escape of electrons in Landau resonance with a whistler mode wave packet are discussed. It is shown that acceleration can occur by both inhomogeneous and dispersive effects. The maximum energy gained is controlled by the points where trapping and escape occur. Large energy changes are possible if the frequency of the wave packet or the magnetic field strength increase between the trapping and escape points. Various trapping and escape mechanisms are discussed.

Gurnett, D. A.↗

Hypothermic and antipyretic effects of ACTH (1-24) and alpha-melanotropin in guinea-pigs

Intracerebroventricular administration of adrenocorticotropin (ACTH 1-24) and alpha-melanotropin (alpha-MSH), peptides which occur naturally in brain induced dose-related hypothermia in guinea-pigs at room temperature (21 C) and also produced greater hypothermia at low (10 C) ambient temperature. However, when the experiments were repeated in a warm (30 C) environment, no effect on body temperature was observed. These results indicate that the peptides did not reduce the central set-point of temperature control. The hypothermia induced by ACTH and alpha-MSH was not mediated via histamine H1- or H2-receptors and serotonin since the H1-receptor antagonist, mepyramine, the H2-receptor antagonist, cimetidine, and the serotonin antagonist, methysergide, had no antagonistic effects. The peptides were antipyretic since they reduced pyrogen-induced-fever and hyperthermia due to prostaglandin E2, norepinephrine and dibutyryl cAMP, at a dose which did not affect normal body temperature. The powerful central effects of these peptides on normal body temperature, fever and hyperthermia, together with their presence of the brain regions important to temperature control, suggest that they participate in thermoregulation.

Kandasamy, S. B.↗

Comet rendezvous

A Mariner Mark II spacecraft rendezvous mission with comet Kopff has been recommended by NASA's Solar System Exploration Committee, and is scheduled for a Shuttle launch in 1990. The spacecraft, which is scheduled to encounter the comet in 1994, will conduct a series of experiments including the study of the cometary nucleus, coma, and tail during perihelion passage; the determination of the nucleus and coma chemical/isotropic composition; the description of the nucleus's size, mass, rotation period, and pole occultation; distinctions of gas and dust hydrodynamics; and distinctions of solar wind interactions with the coma. The three-axis-stabilized spacecraft will be modular in design, and will incorporate a 490-Newton Insat engine, Viking Orbiter propulsion tanks, an Integrated Platform Pointing and Attitude Control Subsystem, and several scientific instruments. The spacecraft's Radio Frequency Subsystem will only use X-band telemetry with a downlink frequency of 8415 MHz, and an uplink frequency of 7161 MHz. The power sources in the present design include one radioisotope thermoelectric generator, three 3 Ah batteries, and a solar panel of approximately 7 sq m.

Draper, R. F.↗

Pointable Auger

Machine drills, crushes, and feeds coal - and seeks out extra-hard inclusions. Auger mounted on gimbal, located at its center of gravity for ease of maneuvering. Opposing hydraulic cylinders cooperate to point auger under control of microprocessor. Its diamond teeth break up coal seam, it crushes coal fed to it by mining machine jaws, and its screw action pushes crushed coal into slurry-forming chamber.

Lewis, E. V.↗

Geometric error analysis for shuttle imaging spectrometer experiment

The demand of more powerful tools for remote sensing and management of earth resources steadily increased over the last decade. With the recent advancement of area array detectors, high resolution multichannel imaging spectrometers can be realistically constructed. The error analysis study for the Shuttle Imaging Spectrometer Experiment system is documented for the purpose of providing information for design, tradeoff, and performance prediction. Error sources including the Shuttle attitude determination and control system, instrument pointing and misalignment, disturbances, ephemeris, Earth rotation, etc., were investigated. Geometric error mapping functions were developed, characterized, and illustrated extensively with tables and charts. Selected ground patterns and the corresponding image distortions were generated for direct visual inspection of how the various error sources affect the appearance of the ground object images.

Wang, S. J.↗

Dynamic isolation of a spacecraft science platform via momentum compensation

The dynamic isolation of a two degree of freedom inertially stabilized science platform from the spacecrft basebody is examined. The important implications of a momentum compensated platform for pointing performance and cost are discussed, and the concept of a new system called the Integrated Platform Pointing and Attitude Control Subsystem utilizing the above property is presented. The results established in this paper are demonstrated by a computer simulation.

Boussalis, D.↗

Studies of acoustic effects on a flow boundary layer in air

Effects of sound fields on the flow boundary layer on a flat plate subjected to a parallel flow are studied. The boundary layer is influenced by controlling the stagnation point flow at the front edge of the plate. Depending on the Reynolds number and sound frequency, excitation or suppression of turbulent is observed. Measurements were taken at wind velocities between 10 and 30 m/sec and sound frequencies between 0.2 and 3.0 kHz.

Mechel, F.↗

Optimal torque control for SCOLE slewing maneuvers

The Spacecraft Control Laboratory Experiment (SCOLE) was slewed from one attitude to the required attitude and an integral performance index which involves the control torques was minimized. Kinematic and dynamical equations, optimal control, two-point boundary-value problems, and estimation of unknown boundary conditions are presented.

Bainum, P. M.↗

Line-of-sight performance improvement with reaction-wheel isolation

Design techniques used to isolate and damp vibrations from the reaction control wheels assembly (RCA) from the structural dynamics of the Hubble Space Telescope are described. The four RCAs can generate sufficient torque for large maneuvers and precision control during fine pointing. The RCAs are to operate continuously during observations and thereby pose the potential of inducing jitter. The image stability must be constrained to less than 0.007 arcsec rms per 24 hr and pointing accuracy must be 0.01 arcsec for 100 hr. Vibration-producing characteristics of the RCAs are identified, and test results are provided from measurements of the magnitudes of the associated disturbances. Design features and test results for the vibration isolators employed with the RCAs to effect viscous damping of RCA axial perturbations are presented. The dampers are expected to reduce jitter effects of RCA operation by a half.

Rodden, J. J.↗

Motion planning for a free-flying robot

An investigation is presented of motion planning combining low level control and obstacle avoidance for a free flying robot. This free flying robot is an outgrowth of the concept of an assistant for astronauts on the U.S. Space Station and Shuttle. A motion planner based on the Khatib potential field approach is described. Because of the uncluttered environment in space, it generates a path from representation of known obstacles rather than from a representation of free space. A global planner supplies the low level controller with interim points between the current position and the desired goal position so that the vehicle does not become trapped by local minima, a phenomenon of the potential field approach. Discussion of the feasibility of this system for space applications is presented.

Kaiser, Donald Leo↗

Origin of SNC kaersutitic amphibole: Experimental data

The SNC meteorites, a group of cumulus textured, fine grained diabases, pyroxenites, and dunites, appear to have crystallized at relatively shallow depths on the same SNC parent body. Hydrous minerals generally are not present among the cumulus and intercumulus minerals in these meteorites except for some iddingsite alteration of olivine. The presence of hydrous magmatic amphibole in the SNC melt inclusions indicates that crystallization of the melt inclusions had to take place at significant pressure, probably greater than 1 kb based on previous amphibole stability data. If experimental data for kaersutite amphibole were to be obtained, it should be possible to estimate this pressure more precisely then previously, and to estimate the volatile (H2O) content of the parent magma. At this point, the factors controlling the chemistry and stability of high TiO2, kaersutitic amphiboles are not known. In an attempt to determine the factors which control the stability and chemistry of TiO2-rich amphibole, data was refined and extrapolated from four experimental studies of amphibole-melt equilibria recently completed. At the same time, hypothermal experiments were performed on a composition considered to be an early melt in the Shergotty magma liquid line of descent. The latter experiments were an attempt to reproduce crystallization of the amphibole-bearing melt inclusions.

Rutherford, M. J.↗

Minimax optimal control for atmospheric fly-through trajectories

Necessary conditions for minimax problems with isolated or flat maxima are presented. Some relevant properties concerning the peak heating rate and the peak deceleration during atmospheric entry are discussed. As application of the theory, the problem of minimizing the peak heating rate of a skip trajectory is solved with special emphasis on the discussion of the continuity of the lift control at the point where the maximum occurs along the trajectory.

Lu, P.↗

New numerical solutions of three-dimensional compressible hydrodynamic convection

Numerical solutions of three-dimensional compressible hydrodynamics (including sound waves) in a stratified medium with open boundaries are presented. Convergent/divergent points play a controlling role in the flows, which are dominated by a single frequency related to the mean sound crossing time. Superposed on these rapid compressive flows, slower eddy-like flows eventually create convective transport. The solutions contain small structures stacked on top of larger ones, with vertical scales equal to the local pressure scale heights, H sub p. Although convective transport starts later in the evolution, vertical scales of H sub p are apparently selected at much earlier times by nonlinear compressive effects.

Hossain, Murshed↗

Effects of source vs. interactive actuator assumptions on modelling of a smart structure

Embedded or internal actuators in a structure are being utilized to perform vibration attenuation, pointing maneuvers, damage control, and other adaptive tasks. The controls-structures-interaction (CSI) design process depends strongly on the coupled dynamic response of the structure and the actuators. A bond graph approach is used to guide this analytical study to uncover the effects of certain generic actuator types on the closed-loop, initial condition control of a single-mode structural model and an eighteen-state model of an active truss. So-called 'flow' and 'effort' source actuator types were studied and were shown to have significant differences in closed-loop response for ranges of initial conditions and system open-loop natural frequencies.

Robertshaw, Harry H.↗

Planet-B: A Japanese Mars aeronomy observer

An introduction is given to a Japanese Mars mission (Planet-B) which is being planned at the Institute of Space and Aeronautical Science (ISAS), Japan. Planet-B aims to study the upper atmosphere of Mars and its interaction with the solar wind. The launch of Planet-B is planned for 1996 on a new launcher, M-L, which is being developed at ISAS. In addition to the interaction with the solar wind, the structure of the Martian upper atmosphere is thought to be controlled by the meteorological condition in the lower atmosphere. The orbit of Planet-B was chosen so that it will pass two important regions, the region where the solar wind interacts with the Martian upper atmosphere and the tail region where ion acceleration is taking place. Considering the drag due to the Martian atmosphere, the periapsis altitude of 150 km and apoapsis of 10 Martian radii are planned. The orbit plane will be nearly parallel to the ecliptic plane. The altitude of the spacecraft will be spin stabilized and its spin axis will be controlled to the point of the earth. The dry weight of the spacecraft will be about 250 kg, including the scientific payload which consists of a magnetometer, plasma instruments, HF sounder, UV imaging spectrometer, and lower atmosphere monitor.

Tsuruda, K.↗

Design definition of the Laser Atmospheric Wind Sounder (LAWS), phase 2. Volume 1: Executive summary

The LAWS phase 1 and phase 2 studies have been completed on schedule and have led to significant advances in CO2 laser development. The Phase 2 Design Definition Study has shown that a large scanning mirror/high pulse energy laser LAWS Instrument is feasible and within the existing technology. The capability to monitor wind velocities with backscatter ratios of 10(exp 11) m(exp -1) SR(exp -1) is feasible. The weight budget allocated for the baseline LAWS is adequate, and sufficient reserves exist with the potential downsized configuration. With the possible decrease in available power from the baseline of 2.2 kW guideline, power and shot management is critical for the baseline configuration (15 to 20 J). This is particularly true during the 100 day occultation period each year. With the downsized configurations (5 to 7 J), power management is still necessary during the occultation but is primarily limited to shot management over the polar regions. The breadboard effort has produced significant laser advances for a tight 18 month schedule and the minimum budgets available from NASA, Lockheed, and TDS. Using the NASA funds and Lockheed and TDS fixed assets budgets, the breadboard was designed, fabricated, and brought on-line with first laser light within 16 months after ATP. First laser beam was obtained on 21 April 1992 at a 5 J power level. Tests since then have been conducted at sustained, repetitive pulse levels of over 7 J and 20 Hz. This is an increase of over two or three times greater than any system previously developed from this type laser. Increased power levels and additional life tests will be accomplished in the next LAWS phase. The Lockheed LAWS design will operate in the gravity gradient mode on-orbit, and all possible instrument vibration and jitter modes have been considered. Adequate pointing stability and control is state-of-the-art technology for the critical time periods, frequency rates, and control responses required by LAWS. Lockheed recommends a 6-1/2 year phase C/D program for LAWS to provide adequate feedback from the engineering unit and the qualification unit to the final flight unit. Assuming a one year period for LAWS integration to the spacecraft, followed by a six-month period for launch vehicle integration, LAWS could be successfully developed and launched in eight years. Our baseline design or downsized design can be accommodated by either the Atlas 2AS or the Delta launch vehicles. Lockheed's recommendation is that, based on the successful phase 2 design study and breadboard program, a follow-on 18 month extended breadboard testing program and additional system engineering studies, primarily in interfacing with a to be defined platform, be initiated. This should be immediately followed by the phase C/D program, leading to a LAWS launch in late 2001 or early 2002.

Source record↗