Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “passivation layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Three Regimes of Polymer Surface Dynamics under Crowded Conditions

In this work, single-molecule tracking was used to characterize the mobility of poly(ethylene glycol) chains at a solid–liquid interface over a wide range of surface coverage. Trajectories exhibited intermittent motion consistent with a generalized continuous time random walk (CTRW) model, where strongly confined “waiting times” alternated with rapid flights. The presence of three characteristic regimes emerged as a function of surface coverage, based on an analysis of effective short-time diffusion coefficients, mean-squared displacement, and CTRW distributions. The dilute “site-blocking” regime exhibited increasing short-time diffusion, less confined behavior, and shorter waiting times with higher surface coverage, as anomalously strong adsorption sites were increasingly passivated. At intermediate values of surface coverage, the “crowding” regime was distinguished by the exact opposite trends (slower, more confined mobility), presumably due to increasing intermolecular interactions. The trends reversed yet again in the “brush” regime, where adsorbing molecules interacted weakly with a layer of extended overlapping chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ligand Locking on Quantum Dot Surfaces via a Mild Reactive Surface Treatment

At the outermost surface of colloidal QDs are organic surface ligands which dynamically bind and release in solution to control the growth kinetics, control the size/shape of the crystals, passivate surface states, and provide colloidal stability through favorable interactions with the solvent. However, the dynamicity comes at the expense of the stability of the QD suspension. Here, we show that ligands can be permanently locked on the QD surface by a thin layer of an inert metal oxide which forms within the ligand shell, over the headgroup. By interrogating the surface chemistry with different spectroscopic methods, we prove the ligand locking on the QD surface. As a result, an exceptional stability of the coated QD inks is achieved in a wide concentration range, even in the presence of chemically competing surface ligands in solution. We anticipate that this critical breakthrough will benefit different areas related to colloidal QDs, spanning from single-particle studies to displays and solar cells and biological applications. Furthermore, the same chemistry could be easily translated to surface treatments of bulk materials and thin films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lightwave-driven electron emission for polarity-sensitive terahertz beam profiling

The full exploitation of advanced light sources in the terahertz (THz) frequency range requires versatile experimental tools to fully characterize the spatial, temporal, and spectral shapes of the THz electric field. Several techniques for passive THz beam profiling exist that offer information about the temporally integrated intensity. Thus, any information about the electric field itself is lost. Here, we show that a UV–visible light emission produced via a lightwave-driven field emission from single-layer metasurfaces can be used to visualize the peak electric field distribution of THz beams in real time. Our technique is scalable up to frequencies approaching the plasma frequency of the metal used for the metasurface. Uniquely, our device is sensitive to the absolute polarity of the THz lightwave. These findings demonstrate a general pathway to designing metamaterial-based field-sensitive optical detectors suitable for the entire THz and IR spectral region.

42 ENGINEERING↗

Reflectivity, Emissivity, and Brightness from Multilayered Soil with Linearly Varying Permittivity at P- and L- bands

Passive sensing of root zone soil moisture is theoretically investigated using P and L band frequencies. The soil is considered to be a stratified medium. The reflectivity from the soil surface is found by considering the soil to be composed of a finely layered structure with layer widths that are small compared to a wavelength. A well-known transmission line algorithm is then used to compute the reflectivity at the surface. Emissivity is obtained as (1 – reflectivity). It assumed that the soil is at a constant temperature of 300o K when determining the brightness temperature. A soil moisture profile consisting of two homogeneous layers separated by a layer of linearly varying soil moisture is investigated. The study is made at an incident angle of 40O for horizontal polarization at 0.8 and 1.4 GHz. Two variations of the basic profile are considered: a transition from a layer of lesser moisture to a layer of greater moisture and the opposite. In both cases the P band signal shows greater penetration than the L band case. There is greater penetration in the transition to drier soils. In both cases the L band signals show sensitivity to only the upper surface of the soil as expected.

Ming Li↗

Study of Martian Polar Caps with GISS ROCKE-3D GCM

Martian polar caps consist of both H 2 O and CO 2 ice. While H 2 O ice is mainly passive on modern Mars, it may have not been the case in recent Martian history, when its obliquity was higher, or when it was changing rapidly. The distribution of ice species in the snowpack affects its physical and thermodynamic properties. In the upper layers, it determines its albedo and thermal emissivity. Thus understanding the mutual effect between these ices and their interaction with the atmosphere is crucial for understanding the evolution of Martian polar regions. In this study, we employ a newly-developed Exotic Ices snow model coupled to the NASA Goddard Institute for Space Studies (GISS) ROCKE-3D planetary General Circulation Model (GCM) [1] to study the behavior of Martian polar caps. ROCKE-3D is a planetary GCM developed at NASA GISS as an extension of its Earth climate model, modelE [2]. It has been extensively used to simulate climate of various planets, including Mars (e.g. [3,4]). The Exotic Ices snow model was specially developed for planetary applications which involve more than one condensable in the atmosphere, in which case snow can contain multiple species of ice (CO2 and H 2 O in the Mars case). For each species of ice, the model uses their proper physical properties and phase diagram, but otherwise it treats all species of ice on an equal footing. The combined effects on albedo, thermal inertia and mutual insulation are treated accordingly. The snowpack interacts with the atmospheric dust cycle, and can accumulate a prognostic amount of dust, though the effect of dust on snow properties is not currently treated explicitly, and is prescribed. In this study, we first validate our model against the modern Martial climate, for which we use mission results from Mars Climate Sounder (atmospheric temperature and dust optical depth), SPICAM on Mars Express (atmospheric water), and Viking 2 (surface pressure). We investigate the effect of snow radiative properties on CO 2 and water cycles and the ability of our model to accurately reproduce those with minimal model tuning. We then perform simulations for several obliquities from a recent Martian past, and investigate the behavior of the Martian polar caps in such conditions.

Mars↗

Near-Edge X-ray Absorption Fine Structure Imaging of Spherical and Flat Counterfaces of Ultrananocrystalline Diamond Tribological Contacts: A Correlation of Surface Chemistry and Friction

A recently installed synchrotron radiation near-edge X-ray absorption fine structure (NEXAFS) full field imaging electron spectrometer was used to spatially resolve the chemical changes of both counterfaces from an ultra-nanocrystalline diamond (UNCD) tribological contact. A silicon flat and Si{sub 3}N{sub 4} sphere were both coated with UNCD, and employed to form two wear tracks on the flat in a linear reciprocating tribometer. The first wear track was produced using a new, unconditioned sphere whose surface was thus conditioned during this first experiment. This led to faster run-in and lower friction when producing a second wear track using the conditioned sphere. The large depth of field of the magnetically guided NEXAFS imaging detector enabled rapid, large area spectromicroscopic imaging of both the spherical and flat surfaces. Laterally resolved NEXAFS data from the tribological contact area revealed that both substrates had an as-grown surface layer that contained a higher fraction of sp{sup 2}-bonded carbon and oxygen which was mechanically removed. Unlike the flat, the film on the sphere showed evidence of having graphitic character, both before and after sliding. These results show that the graphitic character of the sphere is not solely responsible for low friction and short run-in. Rather, conditioning the sphere, likely by removing asperities and passivating dangling bonds, leads to lower friction with less chemical modification of the substrate in subsequent tests. The new NEXAFS imaging spectroscopy detector enabled a more complete understanding of the tribological phenomena by imaging, for the first time, the surface chemistry of the spherical counterface which had been in continual contact during wear track formation.

36 MATERIALS SCIENCE↗

Elucidating mechanisms of Li plating on Li anodes of lithium-based batteries

Lithium metal is known as a very promising anode material for lithium-based batteries possessing a quite high theoretical capacity. But it has been kept away from practical applications due to its extreme reactivity and potential safety hazards led by serious dendrite growth. The origins of dendrite formation may be associated with the mechanisms of Li plating and with the mode of charge transfer during Li reduction or oxidation at the anode-electrolyte interface. Here, density functional theory (DFT) calculations are conducted to analyze the electron transfer between Li (100) and Li cations located in the proximity of the surface in several simulation models. The study includes two common used solvents: ethylene carbonate and dimethoxyethane (EC and DME), and a LiPF 6 salt, that surround the Li cation over perfect, defect-containing, and Li 2 CO 3 -passivated Li (100) surfaces. Our calculations demonstrate that the Li cation is easily reduced when bonding to DME rather than EC and its preferred deposition site is the hollow site on both perfect and defective Li (100). Additionally, a compact Li 2 CO 3 layer inhibits the charge transfer from Li metal to Li cations, thus modifying Li plating. It is concluded that the extreme reactivity of the Li metal surface induces a strongly inhomogeneous electron distribution upon deposition of a cation on the surface. This strong charge inhomogeneity may promote uneven Li nucleation and growth, eventually resulting in dendritic behavior.

25 ENERGY STORAGE↗

Impact of lead on an axisymmetric, single bead blown powder DED overhung geometry

Metal additive manufacturing can be utilized for the near net-shape manufacture of components in a layer wise technique. Traditionally, the buildup process is conducted in the direction of gravity or bottom to top in the vertical orientation; however, with the availability of commercial systems with additive heads or fixturing that can index from vertical, and the need to manufacture larger parts without modifying available systems, the limitation of manufacturing from bottom to top is removed enabling the buildup of larger components printed at an angle from vertical. The effect of gravity on the melt pool and as-deposited component quality when printing off vertical is unknown in literature, especially for axisymmetric components. This understanding is critical for the advancement of manufacturing components of increased size in 4 and 5-axis additive systems. This investigation utilizes blown powder directed energy deposition to evaluate the change in as-printed geometry when the start point is altered in relation to gravity while the part rotates to manufacture an axisymmetric component. The objectives of this work are to determine the impact of the deposition location on the geometric variability on axisymmetric components. This investigation tests the hypothesis that differences in layer height exist due to a change in catchment efficiency when the deposition location is moved to a tangent of the round geometry due to a change in the melt pool dynamics. It was found the ideal deposition location when printing at 26.6-degrees from vertical was at −90-degrees from the top center point of the component, along the tangent, where gravity was pushing the melt pool down, but the rotation of the part was pulling the deposited material towards the top center of the component. This work provides an understanding of layer height stability and catchment efficiency to guide print orientation strategy for high-aspect ratio components. It was found the −90-degree lead deposition had the best layer height stability at 0.6 % as compared to the top-center at 6.3 % and +90-degree deposition location at 9.2 % for the nominal programmed layer height. The change in layer height also effected the final diameter the greatest for the top center deposition location where the diameter diverged by 2.5 % during the overbuild condition and converged by 0.6 %. In conclusion, this finding will increase the manufacturing efficiency of axisymmetric components by increasing the passive stability of the printing process for the successful manufacture of parts without the need for perfectly calibrated manufacturing parameters.

36 MATERIALS SCIENCE↗

Direct synthesis of biaxially textured nickel disilicide thin films by magnetron sputter deposition on low-cost metal tapes for flexible silicon devices

Nickel silicides are widely used as contact materials for electronic devices based on silicon (Si). However, they have been predominantly fabricated by annealing separate Ni and Si phases which leads to phase and structural complexity. In this letter, direct epitaxial growth of a single-phase nickel disilicide (NiSi 2 ) thin film by sputter deposition of NiSi 2 is achieved on low-cost and flexible Hastelloy tapes which offers a promising route to fabricate low-cost, flexible electronic devices. Biaxially textured titanium nitride (TiN) is applied as the seeding layer and the diffusion barrier under NiSi 2 . An epitaxial relationship of (001)$\langle$100$\rangle$NiSi 2 ∥ (001)$\langle$110$\rangle$TiN is observed with an extra-large lattice mismatch (~10.3%) between NiSi 2 and TiN. Both the bonding similarity and the passivation effect by hydrogen promote the epitaxial growth of NiSi 2 on TiN. The flat and smooth NiSi 2 thin film consists of grains with a size of 50–100 nm. An epitaxially grown Si film on NiSi 2 further demonstrates the potential of manufacturing high-performance Si flexible electronics with NiSi 2 /TiN/Hastelloy as the direct contact through this approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improvement of Short-Circuit Current Density in GaInP Solar Cells Grown by Dynamic Hydride Vapor Phase Epitaxy

We demonstrate GaInP solar cells grown by dynamic hydride vapor phase epitaxy with improved efficiency through elimination of nonradiative recombination centers. We redesigned our reactor to eliminate unintentional impurities, which led to a reduction of nearly 30 x in dark current. This improvement led to a significantly improved open-circuit voltage of 1.41 V and a band gap-voltage offset of 0.47 V in a device with a rear reflector, achieved without front surface passivation. We demonstrate that the limiting factor toward achieving higher efficiency is control over the emitter thickness. Recombination is high in the unpassivated emitter, but losses can be minimized by designing it to be thin. We show that Se diffusion from the GaAs contact layer into the base is responsible for unintentional thickening of the emitter. Use of reduced contact doping reduces the penetration of Se into the p-GaInP base layer. With improved control of Se diffusion, we achieve 13.0 mA/cm 2 and 15.2% certified efficiency in a single-junction GaInP cell structure that is optically equivalent to the top cell in a GaInP/GaAs tandem.

14 SOLAR ENERGY↗

High temperature operation to 500 °C of AlGaN graded polarization-doped field-effect transistors

AlGaN polarization-doped field-effect transistors were characterized by DC and pulsed measurements from room temperature to 500 °C in ambient. DC current-voltage characteristics demonstrated only a 70% reduction in on-state current from 25 to 500 °C and full gate modulation, regardless of the operating temperature. Near ideal gate lag measurement was realized across the temperature range that is indicative of a high-quality substrate and sufficient surface passivation. The ability for operation at high temperature is enabled by the high Schottky barrier height from the Ni/Au gate contact, with values of 2.05 and 2.76 eV at 25 and 500 °C, respectively. The high barrier height due to the insulatorlike aluminum nitride layer leads to an ION/IOFF ratio of 1.5 × 10 9 and 6 × 10 3 at room temperature and 500 °C, respectively. Transmission electron microscopy was used to confirm the stability of the heterostructure even after an extended high-temperature operation with only minor interdiffusion of the Ni/Au Schottky contact. The use of refractory metals in all contacts will be key to ensure a stable extended high-temperature operation.

36 MATERIALS SCIENCE↗

Confinement of thermocapillary floating zone flow by uniform rotation

Smith and Greenspan (1984) examined theoretically the idea of using a uniform rotation of the floating zone system to confine the thermocapillary flow in crystal growth experiments to the melt sidewall, leaving the interior of the melt passive. Here, that model is extended to a full zone with a more realistic temperature distribution imposed on the sidewall, and both linear and nonlinear thermocapillary flows are theoretically studied. Linearized, analytical solutions are found using singular perturbation theory and the various sidewall boundary layers described by Greenspan (1969) for rotating fluids. The analytical and linearized numerical results are compared, and the linear and nonlinear flows are discussed. The results demonstrate that the thermocapillary flow is strong and that rotation cannot confine the flow. Temperature advection by strongly nonlinear flow is significant even for the small Prandtl number of silicon.

Fowlis, W. W.↗

Analysis of elastically tailored viscoelastic damping member

For more than two decades, viscoelastic materials have been commonly used as a passive damping source in a variety of structures because of their high material loss factors. In most of the applications, viscoelastic materials are used either in series with or parallel to the structural load path. The latter is also known as the constrained-layer damping treatment. The advantage of the constrained-layer damping treatment is that it can be incorporated without loss in structural integrity, namely, stiffness and strength. However, the disadvantages are that: (1) it is not the most effective use of the viscoelastic material when compared with the series-type application, and (2) weight penalty from the stiff constraining layer requirement can be excessive. To overcome the disadvantages of the constrained-layer damping treatment, a new approach for using viscoelastic material in axial-type structural components, e.g., truss members, was studied in this investigation.

Chen, G.-S.↗

Sample Processor for Life on Icy Worlds (SPLIce): Design and Test Results

We report the design, development, and testing of the Sample Processor for Life on Icy Worlds (SPLIce) system, a microfluidic sample processor to enable autonomous detection of signatures of life and measurements of habitability parameters in Ocean Worlds. This monolithic fluid processing-and-handling system (Figure 1; mass 0.5 kg) retrieves a 50-L-volume sample and prepares it to supply a suite of detection instruments, each with unique preparation needs. SPLIce has potential applications in orbiter missions that sample ocean plumes, such as found in Saturns icy moon Enceladus, or landed missions on the surface of icy satellites, such as Jupiters moon Europa. Answering the question Are we alone in the universe? is captivating and exceptionally challenging. Even general criteria that define life very broadly include a significant role for water [1,2]. Searches for extinct or extant life therefore prioritize locations of abundant water whether in ancient (Mars), or present (Europa and Enceladus) times. Only two previous planetary missions had onboard fluid processing: the Viking Biology Experiments [3] and Phoenixs Wet Chemistry Laboratory (WCL) [4]. SPLIce differs crucially from those systems, including its capability to process and distribute L-volume samples and the integration autonomous control of a wide range of fluidic functions, including: 1) retrieval of fluid samples from an evacuated sample chamber; 2) onboard multi-year storage of dehydrated reagents; 3) integrated pressure, pH, and conductivity measurement; 4) filtration and retention of insoluble particles for microscopy; 5) dilution or vacuum-driven concentration of samples to accommodate instrument working ranges; 6) removal of gas bubbles from sample aliquots; 7) unidirectional flow (check valves); 8) active flow-path selection (solenoid-actuated valves); 9) metered pumping in 100 nL volume increments. The SPLIce manifold, made of three thermally fused layers of precision-machined cyclo-olefin polymer, supports all fluidic components (Figure 1) and integrated microchannels (125 x 250 m). Fluid is pumped by a stepper-motor-driven pump (Lee Co.). The functionality of the integrated MEMS pressure sensor (Honeywell) and passive check valves (Figure 2) were tested in conjunction with our newly designed integral bubble traps (Figure 3) and hydrophobic membrane-based concentrator (Figure 4). The concentrator (initially tested as a standalone component) demonstrated 5-fold vacuum-evaporative concentration. Polyethylene fused bead beds (PEFBBs; 50 porosity) store drylyophilized buffers, calibrants, and fluorescent dyes, and also promote mixing of sample with calibrant, dye, or H2O. Software-controlled automated tests demonstrated successful 1) fluid delivery to each component 2) valve and pump synchronization 3) sample aliquot delivery to instrument interface ports, and 4) rehydration of vacuum-dried fluorescent dye. In Figure 5, fluorescein on PEFBBs was rehydrated for 15 min using a pump-delivered water aliquot; it is displaced as H2O enters the bottom of the channel and pushes the dye into a check valve. Ultimately, SPLIce will fluorescently label amino acids in the sample for microchip-based electrophoretic (MCE) chiral separation and detection to seek and quantify key organic bio-signatures [5]; it will also deliver sample to a microfluidic version of WCL (mWCL) to measure soluble ions and redox-active species.

Life detection↗

Integrated mechanics for the passive damping of polymer-matrix composites and composite structures

Some recent developments on integrated damping mechanics for unidirectional composites, laminates, and composite structures are reviewed. Simplified damping micromechanics relate the damping of on-axis and off-axis composites to constituent properties, fiber volume ratio, fiber orientation, temperature, and moisture. Laminate and structural damping mechanics for thin composites are summarized. Discrete layer damping mechanics for thick laminates, including the effects of interlaminar shear damping, are developed and semianalytical predictions of modal damping in thick simply supported specialty composite plates are presented. Applications show the advantages of the unified mechanics, and illustrate the effect of fiber volume ratio, fiber orientation, structural geometry, and temperature on the damping. Additional damping properties for composite plates of various laminations, aspect ratios, fiber content, and temperature illustrate the merits and ranges of applicability of each theory (thin or thick laminates).

Saravanos, D. A.↗

Volcanic aerosols: Chemistry, evolution, and effects

Stratospheric aerosols have been the subject of scientific speculation since the 1880s, when the powerful eruption of Krakatoa attracted worldwide attention to the upper atmosphere through spectacular optical displays. The presence of a permanent tenuous dust layer in the lower stratosphere was postulated in the 1920s following studies of the twilight glow. Junge collected the first samples of these 'dust' particles and demonstrated that they were actually composed of sulfates, most likely concentrated sulfuric acid (Junge and Manson, 1961; Junge, 1963). Subsequent research has been spurred by the realization that stratospheric particles can influence the surface climate of earth through their effects on atmospheric radiation. Such aerosols can also influence, through chemical and physical effects, the trace composition of the atmosphere, ozone concentrations, and atmospheric electrical properties. The properties of stratospheric aerosols (both the background particles and those enhanced by volcanic eruptions) were measured in situ by balloon ascents and high altitude aircraft sorties. The aerosols were also observed remotely from the ground and from satellites using both active (lidar) and passive (solar occultation) techniques (remote sensing instruments were carried on aircraft and balloon platforms as well). In connection with the experimental work, models were developed to test theories of particle formation and evolution, to guide measurement strategies, to provide a means of connecting laboratory and field data, and to apply the knowledge gained to answer practical questions about global changes in climate, depletion of the ozone layer, and related environmental problems.

Turco, Richard↗

Insights into Boron-Based Polyanion-Tuned High-Nickel Cathodes for High-Energy-Density Lithium-Ion Batteries

Ultrahigh-Ni layered oxide cathodes (Ni content > 90%) are at the forefront for potentially enabling higher-energy density lithium-ion batteries. Unfortunately, they suffer from rapid capacity fade, poor thermal stability, and increased air sensitivity. Introduction of boron-based polyanion into layered cathodes has been found to be effective in stabilizing high-Ni cathodes, but the mechanism behind it is not yet fully understood. To develop a better understanding, we present here an extensive characterization of the ultrahigh-Ni cathode LiNi 0.94 Co 0.06 O 2 (NC) and B 2 O 3 -LiNi 0.94 Co 0.06 O 2 (B-NC). The B-NC delivers a capacity of 223 mA h g -1 with 80% capacity retention after 400 cycles in full cells with graphite anodes, superior to 61% retention for NC. In-depth interphase investigations reveal that the improved cyclability is attributed to the development of a well-passivated boron/phosphorus-rich cathode-electrolyte interphase in B-NC. Moreover, B-NC demonstrates a considerably enhanced air-exposure and thermal stability. A 30-day air-stored B-NC delivers a discharge capacity of 125 mA h g -1 at 10C rate, in sharp contrast to 65 mA h g -1 for the stored NC. Finally, this work advances the understanding of the effect boron-based polyanion insertion into layered oxides has on battery performance and offers a viable strategy for developing practically viable ultra-high-Ni cathodes with high-energy density.

25 ENERGY STORAGE↗

Microstructural Passivation of Patterned Al 2 O 3 Back Contacts on CdS/CdTe Solar Cells

Abstract Patterned aluminum oxide (Al 2 O 3 ) back contact on cadmium telluride (CdTe) solar cells can effectively mitigate the loss of the majority carriers while retaining the passivation benefits for minority carriers. This study investigates the impact of the point‐contact geometry on cell performance, where the spacing of the microholes is systematically varied at a constant microhole diameter (≈16 µm). Microhole arrays are created on an evaporated Al 2 O 3 layer (≈30 nm) on CdTe using laser‐beam lithography and selective wet etching processes. Comparative analysis indicates a significant decrease in fill factor (FF) and short‐circuit current ( I SC ) when the contact fraction falls below 30%, likely due to the Al 2 O 3 barrier impeding majority carriers. Above this fraction, FF and I SC are comparable to those of baseline CdTe cells without Al 2 O 3 . Open‐circuit voltage ( V OC ) shows a gradual decrease as Al 2 O 3 coverage is reduced but exhibits a slight increase (<15 mV) when the contact fraction exceeds 30%. Cathodoluminescence (CL) characterization reveals that significantly improved radiative recombination occurs within the CdTe grain bulk with Al 2 O 3 , whereas this effect on grain boundaries is minimal. The findings imply complex local carrier dynamics in the patterned back‐contact region, closely tied to the microstructural properties of CdTe‐based solar cells.

Roy, Etee Kawna↗