Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optimization problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Wing-section optimization for supersonic viscous flows

The recent interest in High Speed Civil Transport (HSCT) has resulted in renewed research studies of optimized supersonic cruise transport configurations. Incorporation of flow viscosity effects in the design process of such a supersonic wing is currently under investigation. This may lead to more accurate problem formulations and, in turn, greater aerodynamic efficiency than can be obtained by the traditional, inviscid, linear theories. In this context, for a design code to be a candidate for a complex optimization problem, such as three-dimensional viscous supersonic wing design, it should be validated using simpler building-block shapes. To optimize the shape of a supersonic wing, an automated method that also includes higher fidelity to the flow physics is desirable. With this impetus, an aerodynamic optimization methodology incorporating Navier-Stokes equations and sensitivity analysis had been previously developed. Prior to embarking upon the wing design task, the present investigation concentrated on testing the flexibility of the methodology, and the identification of adequate problem formulations, by defining two-dimensional, cost-effective test cases. Starting with two distinctly different initial airfoils, two independent shape optimizations resulted in shapes with very similar features. Secondly, the normal section to the subsonic portion of the leading edge, which had a high normal angle-of-attack, was considered. The optimization resulted in a shape with twist and camber, which eliminated the adverse pressure gradient, hence, exploiting the leading-edge thrust. The wing section shapes obtained in all the test cases had the features predicted by previous studies. Therefore, it was concluded that the flowfield analyses and the sensitivity coefficients were computed and fed to the present gradient-based optimizer correctly. Also, as a result of the present two-dimensional study, suggestions were made for problem formulations which should contribute to an effective wing shape optimization.

Item, Cem C.↗

Optimal output feedback control of linear systems in presence of forcing and measurement noise

The problem of obtaining an optimal control law, which is constrained to be a linear feedback of the available measurements, for both continuous and discrete time linear systems subjected to additive white process noise and measurement noise was Necessary conditions are obtained for minimizing a quadratic performance function for both finite and infinite terminal time cases. The feedback gains are constrained to be time invariant for the infinite terminal time cases. For all the cases considered, algorithms are derived for generating sequences of feedback gain matrices which successively improve the performance function. A continuous time numerical example is included for the purpose of demonstration.

Joshi, S. M.↗

Optimal interaction of indenter with inhomogeneous plate

Consideration is given to a new class of problems dealing with an optimal design of an inhomogeneous plate during dynamic penetration of the rigid indenter. The quality criterion of the process is defined by the specific mass of the target, which absorbs the given kinetic mass of the indenter. Parameters of control are expressed in terms of mechanical characteristics, i.e., distribution of density and the related hardness across the plate thickness. The maximum principle of Pontryagin is used to search for the piecewise continuous control function. With consideration of impact conditions and characteristics for a given class of material, an optimal target structure criterion was estimated for engineering applications.

Aptukov, Valery N.↗

Layout optimization using the homogenization method

A generalized layout problem involving sizing, shape, and topology optimization is solved by using the homogenization method for three-dimensional linearly elastic shell structures in order to seek a possibility of establishment of an integrated design system of automotive car bodies, as an extension of the previous work by Bendsoe and Kikuchi. A formulation of a three-dimensional homogenized shell, a solution algorithm, and several examples of computing the optimum layout are presented in this first part of the two articles.

Suzuki, Katsuyuki↗

Optimal Control via Self-Generated Stochasticity

The problem of global maxima of functionals has been examined. Mathematical roots of local maxima are the same as those for a much simpler problem of finding global maximum of a multi-dimensional function. The second problem is instability even if an optimal trajectory is found, there is no guarantee that it is stable. As a result, a fundamentally new approach is introduced to optimal control based upon two new ideas. The first idea is to represent the functional to be maximized as a limit of a probability density governed by the appropriately selected Liouville equation. Then, the corresponding ordinary differential equations (ODEs) become stochastic, and that sample of the solution that has the largest value will have the highest probability to appear in ODE simulation. The main advantages of the stochastic approach are that it is not sensitive to local maxima, the function to be maximized must be only integrable but not necessarily differentiable, and global equality and inequality constraints do not cause any significant obstacles. The second idea is to remove possible instability of the optimal solution by equipping the control system with a self-stabilizing device. The applications of the proposed methodology will optimize the performance of NASA spacecraft, as well as robot performance.

Zak, Michail↗

A Bell-Curved Based Algorithm for Mixed Continuous and Discrete Structural Optimization

An evolutionary based strategy utilizing two normal distributions to generate children is developed to solve mixed integer nonlinear programming problems. This Bell-Curve Based (BCB) evolutionary algorithm is similar in spirit to (mu + mu) evolutionary strategies and evolutionary programs but with fewer parameters to adjust and no mechanism for self adaptation. First, a new version of BCB to solve purely discrete optimization problems is described and its performance tested against a tabu search code for an actuator placement problem. Next, the performance of a combined version of discrete and continuous BCB is tested on 2-dimensional shape problems and on a minimum weight hub design problem. In the latter case the discrete portion is the choice of the underlying beam shape (I, triangular, circular, rectangular, or U).

Kincaid, Rex K.↗

Shuttle ascent guidance and control.

The requirements of a unified optimal guidance scheme are discussed, giving attention to a general formulation, aspects of self-targeting, problems of optimum guidance within the atmosphere, and a unified concept for all flight phases. Since no previous guidance scheme meets these requirements, the shuttle demands a fundamentally new approach. A new unified optimal guidance scheme, called Mascot, was developed. The capabilities of Mascot include the real-time solution of general trajectory-optimization problems and the unification of guidance for all flight phases.

Lovingood, J. A.↗

Optimal orbit transfer suitable for large flexible structures

The problem of continuous low-thrust planar orbit transfer of large flexible structures is formulated as an optimal control problem with terminal state constraints. The dynamics of the spacecraft motion are treated as a point-mass central force field problem; the thrust-acceleration magnitude is treated as an additional state variable; and the rate of change of thrust-acceleration is treated as a control variable. To ensure smooth transfer, essential for flexible structures, an additional quadratic term is appended to the time cost functional. This term penalizes any abrupt change in acceleration. Numerical results are presented for the special case of a planar transfer.

Chatterjee, Alok K.↗

Optimal mapping of irregular finite element domains to parallel processors

Mapping the solution domain of n-finite elements into N-subdomains that may be processed in parallel by N-processors is an optimal one if the subdomain decomposition results in a well-balanced workload distribution among the processors. The problem is discussed in the context of irregular finite element domains as an important aspect of the efficient utilization of the capabilities of emerging multiprocessor computers. Finding the optimal mapping is an intractable combinatorial optimization problem, for which a satisfactory approximate solution is obtained here by analogy to a method used in statistical mechanics for simulating the annealing process in solids. The simulated annealing analogy and algorithm are described, and numerical results are given for mapping an irregular two-dimensional finite element domain containing a singularity onto the Hypercube computer.

Flower, J.↗

The use of optimization techniques to design controlled diffusion compressor blading

A method for automating compressor blade design using numerical optimization, and applied to the design of a controlled diffusion stator blade row is presented. A general purpose optimization procedure is employed, based on conjugate directions for locally unconstrained problems and on feasible directions for locally constrained problems. Coupled to the optimizer is an analysis package consisting of three analysis programs which calculate blade geometry, inviscid flow, and blade surface boundary layers. The optimizing concepts and selection of design objective and constraints are described. The procedure for automating the design of a two dimensional blade section is discussed, and design results are presented.

Sanger, N. L.↗

Nonsmooth trajectory optimization - An approach using continuous simulated annealing

An account is given of the properties of a continuous simulated annealing algorithm that can function as a global optimization tool for nonsmooth dynamic systems, as shown in the case of a trajectory-optimization program implementation. The approach is shown to successfully solve the problem of nonsmooth trajectory optimization for a high performance rigid-body aircraft. The results obtained demonstrate the superiority of the simulated annealing algorithm over widely used algorithms.

Lu, Ping↗

Tractable Pareto Optimization of Temporal Preferences

This paper focuses on temporal constraint problems where the objective is to optimize a set of local preferences for when events occur. In previous work, a subclass of these problems has been formalized as a generalization of Temporal CSPs, and a tractable strategy for optimization has been proposed, where global optimality is defined as maximizing the minimum of the component preference values. This criterion for optimality, which we call 'Weakest Link Optimization' (WLO), is known to have limited practical usefulness because solutions are compared only on the basis of their worst value; thus, there is no requirement to improve the other values. To address this limitation, we introduce a new algorithm that re-applies WLO iteratively in a way that leads to improvement of all the values. We show the value of this strategy by proving that, with suitable preference functions, the resulting solutions are Pareto Optimal.

Morris, Robert↗

Advancement of the General Aviation Synthesis Program Using Python to Enable Optimization-Based Hybrid-Propulsion Aircraft Design

In support of Electrified Powertrain Flight Demonstrator and Advanced Air Transport Technologies programs at NASA, engineers at NASA Ames and NASA Glenn Research Centers have developed a new tool for coupled engine and airframe optimization and analysis. The new tool combines the engineering-level analysis methods of the FORTRAN General Aviation Synthesis Program (GASP) with the OpenMDAO framework to handle highly coupled problems that legacy tools struggle to optimize. The tool has been verified to match GASP with good agreement on a 737 MAX8 baseline vehicle closure problem, and preliminary efforts have been made to integrate the pyCycle thermodynamic cycle analysis tool for electrified engine optimization in the context of a vehicle optimization problem.

Kenneth R. Lyons↗

Parallel and vector computation for stochastic optimal control applications

A general method for parallel and vector numerical solutions of stochastic dynamic programming problems is described for optimal control of general nonlinear, continuous time, multibody dynamical systems, perturbed by Poisson as well as Gaussian random white noise. Possible applications include lumped flight dynamics models for uncertain environments, such as large scale and background random atmospheric fluctuations. The numerical formulation is highly suitable for a vector multiprocessor or vectorizing supercomputer, and results exhibit high processor efficiency and numerical stability. Advanced computing techniques, data structures, and hardware help alleviate Bellman's curse of dimensionality in dynamic programming computations.

Hanson, F. B.↗

Aerodynamic optimization by simultaneously updating flow variables and design parameters

The application of conventional optimization schemes to aerodynamic design problems leads to inner-outer iterative procedures that are very costly. An alternative approach is presented based on the idea of updating the flow variable iterative solutions and the design parameter iterative solutions simultaneously. Two schemes based on this idea are applied to problems of correcting wind tunnel wall interference and optimizing advanced propeller designs. The first of these schemes is applicable to a limited class of two-design-parameter problems with an equality constraint. It requires the computation of a single flow solution. The second scheme is suitable for application to general aerodynamic problems. It requires the computation of several flow solutions in parallel. In both schemes, the design parameters are updated as the iterative flow solutions evolve. Computations are performed to test the schemes' efficiency, accuracy, and sensitivity to variations in the computational parameters.

Rizk, M. H.↗

Minimum-variance reduced-order estimation algorithms from Pontrygin's minimum principle

A uniform derivation of minimum-variance reduced-order (MVRO) filter-smoother algorithms from Pontrygin's Minimum Principle is presented. An appropriate performance index for a general class of reduced order estimation problem is formulated herein to yield optimal results over the entire time interval of estimation. These results provide quantitative criteria for measuring the performance of certain classes of heuristically designed, suboptimal reduced-order estimators as well as explicit guidance to the suboptimal filter design process with both continuous and discrete filter-smoother algorithms being considered. By the duality principle, the algorithms of reduced-order estimation can be easily extended to the deterministic problems of optimal control (i.e., the regulator and linear tracking problem).

Ebrahimi, Yaghoob S.↗

Fast Aircraft Separation Calculations for Gradient Based Optimization of Airspace Simulations

Simulations of airspace operational concepts can play a significant role in determining future paradigms that would allow for a safe increase in airspace density. In particular, airspace simulations which are capable of handling large numbers of aircraft act as an enabling capability for the testing of proposed airspace operational concepts. Simulations allowing for gradient based optimization methods are particularly attractive, since they would potentially allow for an efficient and empirical means to derive best operational practices. These could also allow for vehicle multidisciplinary design and optimization studies to include air traffic management considerations as a discipline. But any large scale simulation of airspace operations must include some methodology for addressing airspace separation requirements, which in the most direct sense would be tracked in a manner that computationally grows as a quadratic function of the number of simulated aircraft. Efficient indirect methods have been developed in certain contexts to address this limitation. However, any means of addressing separation requirements in a gradient based optimization context should be implemented by functions which provide analytic derivative information to maximize numerical precision and computational efficiency. In this paper, a fast and differentiable separation metric is described in application to gradient based optimization of airspace operations. Rather than computing the separation distance between every pair of aircraft in a simulation, this method effectively reduces the problem to a smaller relevant set using a geometric decomposition. This method guarantees that the smallest distance at all points in simulated time is determined exactly. When used in an optimization constraint context, this guarantees that a minimum separation is maintained between all pairs of aircraft. The presented metric has logarithmic computational growth with respect to the number of simulated aircraft, and is shown to perform well in a series of notional 2D airspace optimization problems when used to enforce specified airborne separation constraints. Results show that this is notably faster than a direct pairwise distance computing metric for optimizations involving both small and large numbers of aircraft, yet enforce separation requirements to the same tolerance. It is shown that this favorable scalability is an enabling capability for more sophisticated air traffic management conceptual studies.

Optimization↗