Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nuclear currents”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Workshop to Plan R&D Support of Fuel/Basket Modification for Direct Disposal of Future DPCs

By 2030 about half of all spent nuclear fuel (SNF) arising from the current fleet of commercial power plants will be in dual-purpose canisters (DPCs), which are designed for storage and transportation but not for disposal. As an alternative to complete repackaging of the fuel for disposal, considerable cost savings and lower worker dose could be realized by directly disposing of this SNF in DPCs. The principal technical consideration is criticality control in a geologic repository, because the DPCs are large and depend on neutron absorbing basket components for criticality control. Neutron absorbing materials are generally aluminum-based, and under disposal conditions can degrade after a few hundred years contact with ground water. Simple modifications to the SNF assemblies or the DPC baskets could help to achieve direct disposal, and this is one of the approaches being studied to address the possibility of disposal criticality (SNL 2020a). Five fuel/basket modification concepts have been proposed (SNL 2020b) and a virtual workshop was conducted to solicit review and feedback on these concepts. The proposed solutions are: 1) zone loading of DPCs to limit reactivity, 2) replacing absorber plates with advanced neutron absorbing (ANA) material, 3) adding disposal control rods to pressurized water reactor (PWR) assemblies, 4) rechanneling boiling water reactor (BWR) assemblies with ANA material, and 5) basket insert plates (chevron inserts) made from ANA material. The presentations from the workshop are provided in this report, and the workshop discussions are summarized. This information includes prioritization of the proposed fuel/basket modification solutions, and prioritization of the associated model development, validation testing, and quality assurance activities. Information documented in this report will help to steer research and development efforts at Sandia National Laboratories, Oak Ridge National Laboratory, and Idaho National Laboratory that support the U.S. Department of Energy, Office of Nuclear Energy, Spent Fuel and Waste Science and Technology program

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Heating and current drive actuators study for FNSF in the ion cyclotron and lower hybrid range of frequency

This paper addresses considerations for the radio frequency (RF) heating and current drive actuators on the Fusion Nuclear Science Facility (FNSF), focusing on the Lower Hybrid Range of Frequency (LHRF) and Ion Cyclotron Range of Frequency (ICRF). FNSF will require long (~months), steady-state pulses to fulfill its mission of high neutron fluence operation for the qualification of fusion nuclear technologies prototypical for a power plant. RF actuators are uniquely capable of sustaining the plasma without requiring large line-of-sight penetrations through the breeding blanket, which mitigates the impact on tritium breeding and neutron shielding. The technology for generation and transmission of RF waves in the LHRF and ICRF are fully mature, however the lifetime of plasma-facing antenna components in the reactor environment remains a significant technology gap. Moving the location of RF actuators from the low field side (LFS) to the high field side (HFS) of the tokamak reduces fluxes of turbulent plasma and energetic particles to the antenna. Compact HFS antenna designs are able to fit within the blanket sectors with minimal impact on overall dimensions. However, material choices for antenna structures represent a significant challenge. Existing materials are unable to simultaneously meet the requirements for high conductivity, high strength, high temperature, and low activation. Pathways forward with respect to materials development are identified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Preferred Concepts for Disposal of the UK Inventory of Depleted, Natural and Low Enriched Uranium - 16382

Depleted, natural and low enriched uranium (DNLEU) forms a significant quantity of the UK inventory of higher activity radioactive materials. The great majority comprises uranic materials produced from uranium enrichment operations and from reprocessing of spent nuclear fuels. The most recent estimate of the total quantity (stocks plus arisings) of UK-owned DNLEU from civil nuclear operations is 170,000 tU. Current UK Government strategy is for DNLEU to be stored indefinitely in existing or new facilities, as required. However, Government strategy for long-term management of uranic materials is under review and a change could potentially cause this material to be reclassified as a waste. An Integrated Project Team (IPT) was formed in 2012 with the objective of identifying and addressing the issues associated with the potential need to dispose of DNLEU, in order to inform wider decision-making on the long-term management of UK DNLEU. Key technical issues considered by the IPT relate to the following: 1. The need for an improved understanding of the UK DNLEU inventory. 2. The identification of preferred chemical and physical form(s), and preferred packaging and disposal concepts for DNLEU - the main subject of this paper. 3. The approach to safety assessment of DNLEU disposal. This paper summarises the disposal concepts under consideration by the IPT, and the rationale for identification of preferred concepts for disposal of DNLEU inventory components. The conclusions will be of interest to other programmes and countries with a requirement to manage large quantities of similar materials. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Web-based Preprocessing and Visualization of 3D FIB Tomography Data for Nuclear Fuel Characterization

Three-dimensional (3D) focused ion beam (FIB) tomography enables reconstruction of internal nuclear fuel features that can't be fully evaluated through surface imaging alone. This capability supports characterization of fuel constituents and defects under thermal and irradiation conditions relevant to microreactor development. However, large tomography datasets can create data-handling, loading, and visualization challenges, especially when image-stack preparation and file conversion must be completed with separate tools. The Computational Ultraspatial Tomography Toolkit for High-Resolution Object Analysis Tools (CUTTRHOAT) is an open-source web application being developed to display FIB tomography datasets available through the Nuclear Research Data System (NRDS). The current alpha version requires prepared HDF5 datasets and has limited integrated data-preparation capabilities. This project improves CUTTHROAT by adding dataset-folder selection, automatic input detection, dataset scanning, missing-slice identification, blank-slice insertion, and image-stack-to-HDF5 conversion. Two applications will be compared: the baseline CUTTHROAT alpha workflow and the updated application containing the integrated data-handling and preprocessing functions. Evaluation will consider dataset detection accuracy, conversion success, loading time, rendering responsiveness, application stability, and user interaction. Preliminary results demonstrate successful loading of existing HDF5 files and converted image stacks, while testing also identified performance reductions caused by excessive blank-slice generation. The updated workflow reduces reliance on external preparation tools and supports more direct movement from image stacks to color-code 3D visualization. Future work includes refining missing-slice handling, integrating additional preprocessing functions, like a denoising feature, parsing TIFF metadata for automatic voxel scaling, and adding manual X, Y, and Z voxel-spacing inputs for PNG and JPEG.

36 - MATERIALS SCIENCE↗

Autonomous Inspection of Geologic Repositories: Current State of the Art and Future Directions

Geological repositories for nuclear waste, including spent nuclear fuel, present a significant challenge for traditional International Atomic Energy Agency (IAEA) safeguards tools due to their inaccessibility and demanding operational conditions. The IAEA has been working closely with Member State organizations currently involved in repository construction and planning, including Euratom, the Finnish and Swedish regulatory authorities, and relevant facility operators. However, the verification challenge remains unsolved, and there persists an out- standing need for tools and approaches that will help the IAEA verify that no nuclear material is diverted from a repository environment. The challenge is also not static. Activities must encompass verification of the design, prior to and during the construction/operation phase, and post backfill. Throughout these various phases, it is imperative that the IAEA maintains a continuity of knowledge (CoK) of all material including information on material inventory and flow. This paper highlights these challenges and outlines how they might be addressed by using remote or autonomous vehicles. Specifically, we discuss the current state of the art in robotic autonomy for known or partially known environment mapping and patrolling, as well as shared autonomy, where humans collaborate with closed loop autonomation to complete tasks. We explore the feasibility of using rovers for these verification tasks, along with the challenges associated with system implementation. Hardware and software suggestions are provided based on the adoption of similar technologies in other comparable areas and ability to close technical gaps. Lastly, human-robotic interactions are considered based on the challenges of the environment of the repository and effective deployment and continued operation of the robot system.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Task 1. Monitoring real time materials degradation. NRC extended In-situ and real-time Monitoring

The overall objective of this project was to perform a scoping study to identify, in concert with the nuclear industry, those sensors and techniques that have the most promising commercial viability and fill a critical inspection or monitoring need. Candidates to be considered include sensors to monitor real-time material degradation, characterize residual stress, monitor and inspect component fabrication, assess radionuclide and associated chemical species concentrations in ground water and soil, characterize fuel properties, and monitor severe accident conditions. Under Task 1—Monitoring Real-Time Materials Degradation—scoping studies were conducted to assess the feasibility of potential inspection and monitoring technologies (i.e., a combination of sensors, advanced signal processing techniques, and data analysis methods) that could be utilized in LWR and/or advanced reactor applications for continuous monitoring of degradation in-situ. The goal was to identify those techniques that appear to be the most promising, i.e., those that are closest to being both technically and commercially viable and that the nuclear industry is most likely to pursue. Current limitations and associated issues that must be overcome before commercial application of certain techniques have also been addressed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Overview of reductants utilized in nuclear fuel reprocessing/recycling

Most of the aqueous processes developed, or under consideration worldwide for the recycling of used nuclear fuel (UNF) utilize the oxido-reduction properties of actinides to separate them from other radionuclides. Generally, after acid dissolution of the UNF, (essentially in nitric acid solution), actinides are separated from the raffinate by liquid-liquid extraction using specific solvents, associated along the process, with a particular reductant that will allow the separation to occur. For example, the industrial PUREX process utilizes hydroxylamine as a plutonium reductant. Hydroxylamine has numerous advantages: not only does it have the proper attributes to reduce Pu(IV) to Pu(III), but it is also a non-metallic chemical that is readily decomposed to innocuous products by heating. However, it has been observed that the presence of high nitric acid concentrations or impurities (such as metal ions) in hydroxylamine solutions increase the likelihood of the initiation of an autocatalytic reaction. Recently there has been some interest in the application of simple hydrophilic hydroxamic ligands such as acetohydroxamic acid (AHA) for the stripping of tetravalent actinides in the UREX process flowsheet. This approach is based on the high coordinating ability of hydroxamic acids with tetravalent actinides (Np and Pu) compared with hexavalent uranium. Thus, the use of AHA offers a route for controlling neptunium and plutonium in the UREX process by complexant based stripping of Np(IV) and Pu(IV) from the TBP solvent phase, while U(VI) ions are not affected by AHA and remain solvated in the TBP phase. In the European GANEX process, AHA is also used to form hydrophilic complexes with actinides and strip them from the organic phase into nitric acid. However, AHA does not decompose completely when treated with nitric acid and hampers nitric acid recycling. In lieu of using AHA in the UREX + process, formohydroxamic acid (FHA), although not commercially available, hold promises as a replacement for AHA. FHA undergoes hydrolysis to formic acid which is volatile, thus allowing the recycling of nitric acid. Unfortunately, FHA powder was not stable in the experiments we ran in our laboratory. In addition, AHA and FHA also decompose to hydroxylamine which may undergo an autocatalytic reaction. Other reductants are available and could be extremely useful for actinides separation. The review presents the current plutonium reductants used in used nuclear fuel reprocessing and will introduce innovative and novel reductants that could become reducers for future research on UNF separation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

HALEU Decontamination Investigations for EBR-II Recovered Uranium. HALEU Drip Casting Results in the Fuel Conditioning Facility Cathode Processor

Many of the new advanced reactor designs being proposed by the nuclear private sector require uranium fuel enriched between 5 and 20%, otherwise known as High Assay Low Enriched Uranium (HALEU), to support their designs. There are currently no commercial facilities based in the United States which have the capability to produce this material, and as a result the nuclear industry has requested support from the Department of Energy (DOE) to meet this need. One approach being considered by DOE to respond to this demand is to recover highly enriched uranium from used nuclear fuels and downblend it to enrichments less than 20 % U-235. DOE’s past research related to liquid metal fast breeder reactors resulted in the irradiation of more than 3 metric tons (MT) of nuclear fuel composed of highly enriched metallic uranium which resides at the Idaho National Laboratory (INL). This inventory of used nuclear fuel is currently being conditioned using an electrometallurgical treatment process (EMT) to facilitate its eventual disposition to a geologic repository. As part of this treatment process, the highly enriched component of this used fuel is separated, recovered, downblended to <20% U-235, and stored as a metallic uranium ingot. The majority of this fuel was irradiated in the Experimental Breeder Reactor II (EBR-II) over the course of its 30 years of operation. This sodium cooled fast reactor utilized a core composed of highly enriched, sodium-bonded, metallic fuel to sustain or “drive” the reactor. This EBR-II driver fuel is currently being treated for sodium neutralization in the Fuel Conditioning Facility (FCF) at the Materials and Fuels Complex (MFC) and the metallic uranium recovered as a component of this process has been proposed as a potential source of supply of high assay low enriched uranium. The irradiation of the metallic uranium fuel results in the creation of fission products and some minor actinides which are not compatible with many reuse scenario’s, and introduces significant challenges associated with fabrication of new fuel elements using this material. However, it is believed that the current EMT process can be slightly enhanced to address these concerns and result in the recovery of a product that can be considered as a source of supply for HALEU applications. Based on this, DOE requested the INL research methods to enhance the EMT process to produce a recovered uranium material that has a lower contaminant level and lower radiological dose rate and could be utilized in glovebox based fuel fabrication scenarios. The report that follows documents the progress toward meeting this goal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

POSSIBILITIES FOR ASSESSMENT AND OPTIMIZATION OF NPP PHYSICAL PROTECTION SYSTEMS IN UKRAINE ON THE BASIS OF NUCLEAR SAFETY ANALYSIS

The design requirements for physical protection systems currently adopted at Ukrainian NPPs were established in the middle of the nineties on the basis of deterministic analyses and expert evaluations of the vulnerabilities of reactor facilities. At the present time the in-depth assessment of the nuclear safety of Ukrainian NPPs with VVER-1000/B320 reactors has been completed using Probabilistic Safety Assessment (PSA). PSA has established and provided a qualitative assessment of the significance of the equipment for maintaining the integrity of a reactor core and preventing an abnormal radioactive release. The availability of qualitative assessments of the importance of equipment for nuclear safety allows one to assess the existing physical protection system using (1) comparative analysis: to determine whether all equipment and zones that may be affected, as established by the nuclear safety assessment, are actually included into the vital zones protected by the existing physical protection system; (2) specific analysis of dominant contributors: since nuclear safety analyses provide qualitative assessment of the equipment’s importance for safety, it is easy to select a limited group of essential equipment that makes the major contribution to safety, and (3) specific equipment analysis included in dominant emergency sets: part of the components might not be included in the essential equipment group, but it might be included in the dominant emergency sets. If some equipment is found not to be covered by the physical protection system, it is possible, using qualitative assessment of the importance of this equipment for safety, to assess the required degree of enhancement of physical protection. Such analysis will permit an assessment of the sufficiency of the existing physical protection system, to define the "tight" system areas and, therefore, to develop a justified optimization of a PPS with the objective of implementing priority upgrades to enhance safety, and using limited resources in the most effective way. The application of risk-informed approaches to assessment, and subsequent optimization of the physical protection system will permit establishing basis for the implementation of the so-called graded-protection concept.

Shcherbinin, Konstantin↗

J/psi suppression at forward rapidity in Au + Au collisions at sqrt(s_NN)=200 GeV

Heavy quarkonia are observed to be suppressed in relativistic heavy-ion collisions relative to their production in p+p collisions scaled by the number of binary collisions. In order to determine if this suppression is related to color screening of these states in the produced medium, one needs to account for other nuclear modifications including those in cold nuclear matter. In this paper, we present new measurements from the PHENIX 2007 data set of J/{psi} yields at forward rapidity (1.2 < |y| < 2.2) in Au+Au collisions at {radical}s{sub NN} = 200 GeV. The data confirm the earlier finding that the suppression of J/{psi} at forward rapidity is stronger than at midrapidity, while also extending the measurement to finer bins in collision centrality and higher transverse momentum (p{sub T}). We compare the experimental data to the most recent theoretical calculations that incorporate a variety of physics mechanisms including gluon saturation, gluon shadowing, initial-state parton energy loss, cold nuclear matter breakup, color screening, and charm recombination. We find J/{psi} suppression beyond cold-nuclear-matter effects. However, the current level of disagreement between models and d+Au data precludes using these models to quantify the hot-nuclear-matter suppression.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Options for Subscale Maturation of Advanced Reactor Technologies Testing for Nuclear Thermal Propulsion

Several options could be implemented to establish an irradiation testing capability suitable for investigation of the performance of multiple nuclear thermal propulsion fuel elements at prototypic conditions. The prototypic conditions of interest are based on the current needs of the National Aeronautics and Space Administration’s Space Nuclear Power Program. The results of such testing are also intended to reduce the risks currently seen for any future subscale or full-scale ground testing of an engine-reactor system. The optimal solution is dependent upon several factors such as performance, cost, availability, schedule, technology readiness level, and plans for future testing in the SNP Program. Three options, based on different combinations of these factors, are considered in this report.

33 ADVANCED PROPULSION SYSTEMS↗

Nuclear Islands: International Leasing of Nuclear Fuel Cycle Sites to Provide Enduring Assurance of Peaceful Use

Current International Atomic Energy Agency safeguards do not provide adequate protection against the diversion to military use of materials or technology from certain types of sensitive nuclear fuel cycle facilities. In view of highly enriched uranium’s relatively greater ease of use as a nuclear explosive material than plutonium and the significant diseconomies of commercial spent fuel reprocessing, this article focuses on the need for improved international controls over uranium enrichment facilities as the proximate justification for creation of an International Nuclear Fuel Cycle Association (INFCA). In principle, the proposal is equally applicable to alleviating the proliferation concerns provoked by nuclear fuel reprocessing plants and other sensitive nuclear fuel cycle facilities. The INFCA would provide significantly increased nonproliferation assurance to its member states and the wider international community by holding long-term leasehold contracts to operate secure restricted zones containing such sensitive nuclear facilities.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Factors Influencing the Evaluation of Spent Fuel Rail Routes - 19010

The U.S. Department of Energy (DOE) is considering use of rail transport for future shipments of commercial spent nuclear fuel (SNF) from where it currently resides to storage or disposal facilities. Rail carriers transporting in commerce certain quantities of 'rail security sensitive materials,' including SNF, face a regulatory requirement from the U.S. Department of Transportation to perform route risk assessments on an annual basis. In performing these assessments, each affected rail carrier must take into consideration twenty-seven different route factors, and document its rationale for selecting preferred and alternative routes on the basis of the safety and security risk analysis results. The major freight rail carriers operating in the U.S. have invested in the development of a proprietary tool, for rail carrier use only, to assist them in making route selections. This tool utilizes operations data input by each affected rail carrier in conjunction with geographic information systems (GIS) data to represent proximate risk factors, to be integrated and assigned to individual points and segments on the railroad network. Separate safety and security risk values are generated for each rail route under consideration. These values are then placed on an equivalent scoring basis and summed together to allow direct comparison between different route options and to rank order each route in terms of its relative attractiveness. Each affected rail carrier files an annual report for evaluation by the Federal Railroad Administration (FRA) that documents its route risk assessment approach and analysis results. DOE has developed its own decision-support tool, Stakeholder Tool for Assessing Radioactive Transportation (START), which is capable of generating and analyzing routing options for transporting SNF by rail in addition to other freight modes. To better understand how affected rail carriers are likely to route SNF shipments in accordance with regulatory requirements and those route factors likely to be most influential in impacting DoE's evaluation of alternative SNF rail routes, a study was undertaken by DOE with the following objectives: - Review the shipment routes that have been historically used by rail carriers to move high hazard materials, including SNF; - Identify the physical, operational and proximate characteristics (attributes) associated with the rail segments that comprise these routes; - Evaluate the relationships between these attributes; - Make suggestions for how to streamline the factors used in DoE's rail route evaluations; - Contrast these relationships with how the factors are used by the rail carriers in applying their tool This paper describes the study approach, analysis results, and implications for rail route selection methodology. Differences between this evaluation and railroad industry information about rail route assessments are also discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Recent advances in chiral EFT based nuclear forces and their applications

During the past two decades, chiral effective field theory has evolved into a powerful tool to derive nuclear forces from first principles. Nearly all two-nucleon interactions have been worked out up to sixth order of chiral perturbation theory, while, with few exceptions, three-nucleon forces, which play a subtle, but crucial role in microscopic nuclear structure calculations, have been derived up to fifth order. We review the current status of these forces as well as their applications in nuclear many-body systems. While the ab initio description of light nuclei is generally very successful, we point out and analyze problems encountered with medium-mass nuclei. We also survey the construction of equations of state for symmetric nuclear matter and neutron-rich matter based on chiral forces. A focal point is the symmetry energy and its impact on neutron skins and systems of astrophysical relevance. The physics of neutron-rich systems, from nuclei to compact stars, is essentially determined by the density dependence of the symmetry energy. Here, we review the status of predictions in comparison with latest empirical constraints, with particular attention to those extracted from parity-violating electron scattering.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Enhancing Reliability of Classified Shipments Between the Nuclear Security Enterprise

The extent of this project, as related to by the Nuclear Security Enterprise (NSE), is related to the current shipping and logistical issues and optimization opportunities between several different NSE sites that are the basis of the enterprise. This current scope is part of every site’s, described as Design Agency (DA) and Production Agency (PA), normal operation to meet the needs and mission of the National Nuclear Security Administration (NNSA). The NSE has a broad mission scope encompassing several differing DA and PA sites to meet the NNSA’s mission. These sites require frequent interaction and shipments of material and items between one another in order to meet the mission needs of the enterprise. Currently, there is no methodology that integrates schedules, standards, orders, processes, and best practices to optimize transfers between the differing sites. A centralized location and standard shipping process will optimize and improve the systems behavior, reducing lag time and increasing throughput at sites today. Ultimately this project proposes a central logistical platform, tiered escalation process, and standardized shipping forms to reduce taxpayer costs to meet the NSE’s mission more efficiently. This increase in processing logistics and process accuracy of shipments will save the NSE, not only from a monetary value, but it will reduce the frustrations of individuals working these outdated and over processed systems to improve their quality of life.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Advanced Nuclear Fuels and Materials Development and Philosophy of the DOE Advanced Fuels Campaign

The mission of the Advanced Fuels Campaign (AFC) is to perform Research, Development, and Demonstration (RD and D) activities for advanced fuel forms (including cladding) to enhance the performance and safety of the nation's current and future reactors; enhance proliferation resistance of nuclear fuel; effectively utilize nuclear energy resources; and address longer-term waste management challenges. This includes development of a state-of-the art Research and Development (R and D) infrastructure to support the use of a 'goal-oriented science-based approach.' AFC uses this approach to develop a fundamental understanding of fuel and cladding fabrication methods and performance under irradiation, enabling the pursuit of multiple fuel forms for future fuel cycle options. This approach includes fundamental experiments, theory, and advanced modeling and simulation. One of the most challenging aspects of AFC is the management, integration, and coordination of major R and D activities across multiple organizations. AFC interfaces and collaborates with other Fuel Cycle Technologies (FCT) campaigns, universities, industry, various DOE programs and laboratories, federal agencies (e.g., Nuclear Regulatory Commission [NRC]), and international organizations. Key challenges are the development of fuel technologies to enable major increases in fuel performance (safety, reliability, power and burnup) beyond current technologies, and development of characterization methods and predictive fuel performance models to enable more efficient development and licensing of advanced fuels. AFC is challenged with the research and development of fuels for two different reactor technology platforms, namely transmutation fuel for non-water cooled reactors and advanced fuel development for light water reactor (LWR) systems. This presentation will provide an overview of the Advanced Fuel Campaign activities including the near term activities in advanced nuclear fuel system research and development as well as highlighting general activities pursued to improve the study, modeling, and simulation of irradiated nuclear materials. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Induced Ferromagnetism in Epitaxial Uranium Dioxide Thin Films

Abstract Actinide materials have various applications that range from nuclear energy to quantum computing. Most current efforts have focused on bulk actinide materials. Tuning functional properties by using strain engineering in epitaxial thin films is largely lacking. Using uranium dioxide (UO 2 ) as a model system, in this work, the authors explore strain engineering in actinide epitaxial thin films and investigate the origin of induced ferromagnetism in an antiferromagnet UO 2 . It is found that UO 2+ x thin films are hypostoichiometric ( x <0) with in‐plane tensile strain, while they are hyperstoichiometric ( x >0) with in‐plane compressive strain. Different from strain engineering in non‐actinide oxide thin films, the epitaxial strain in UO 2 is accommodated by point defects such as vacancies and interstitials due to the low formation energy. Both epitaxial strain and strain relaxation induced point defects such as oxygen/uranium vacancies and oxygen/uranium interstitials can distort magnetic structure and result in magnetic moments. This work reveals the correlation among strain, point defects and ferromagnetism in strain engineered UO 2+ x thin films and the results offer new opportunities to understand the influence of coupled order parameters on the emergent properties of many other actinide thin films.

36 MATERIALS SCIENCE↗