SEARCH · Engineering Papers

Results for “mechanical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

All sources NASA NTRS DOE OSTI

NASA NTRS1983

Plausible mechanisms for rapid acceleration of protons during solar flares

The distinctive physical features of 20 gamma-ray line flares observed during Solar Maximum Mission are discussed. The average energy deposition by nonthermal electrons in the impulsive phase of the flare event of April 27, 1980 is calculated, on the basis of spectral data from the Hinotori satellite. Analysis of the hard X-ray spectral evolution of the flare events of June 21, 1980 and April 27, 1981, showed a very hot (about 10 to the 8th K) thermal component with an emission measure of 3 x 10 to the 47th per cu cm. Some possible mechanisms for the particle acceleration observed during the flare events are discussed, including: the delay of high-energy hard X-rays; first-order Fermi acceleration by shocks propagating in a closed flare loop; and the compression of accelerated particles by upstream and downstream scattering centers around a shock front. In addition to the above mechanisms, sotchastic acceleration by turbulence is identified as a possible mechanism for rapid proton acceleration during solar flare events.

Bai, T.↗

NASA NTRS1984

The physical metallurgy of mechanically-alloyed, dispersion-strengthened Al-Li-Mg and Al-Li-Cu alloys

Powder processing of Al-Li-Mg and Al-Li-Cu alloys by mechanical alloying (MA) is described, with a discussion of physical and mechanical properties of early experimental alloys of these compositions. The experimental samples were mechanically alloyed in a Szegvari attritor, extruded at 343 and 427 C, and some were solution-treated at 520 and 566 C and naturally, as well as artificially, aged at 170, 190, and 210 C for times of up to 1000 hours. All alloys exhibited maximum hardness after being aged at 170 C; lower hardness corresponds to the solution treatment at 566 C than to that at 520 C. A comparison with ingot metallurgy alloys of the same composition shows the MA material to be stronger and more ductile. It is also noted that properly aged MA alloys can develop a better combination of yield strength and notched toughness at lower alloying levels.

Gilman, P. S.↗

NASA NTRS1986

A review of fracture mechanics life technology

Lifetime prediction technology for structural components subjected to cyclic loads is examined. The central objectives of the project are: (1) to report the current state of the art, and (2) recommend future development of fracture mechanics-based analytical tools for modeling subcritical fatigue crack growth in structures. Of special interest is the ability to apply these tools to practical engineering problems and the developmental steps necessary to bring vital technologies to this stage. The authors conducted a survey of published literature and numerous discussions with experts in the field of fracture mechanics life technology. One of the key points made is that fracture mechanics analyses of crack growth often involve consideration of fatigue and fracture under extreme conditions. Therefore, inaccuracies in predicting component lifetime will be dominated by inaccuracies in environment and fatigue crack growth relations, stress intensity factor solutions, and methods used to model given loads and stresses. Suggestions made for reducing these inaccuracies include development of improved models of subcritical crack growth, research efforts aimed at better characterizing residual and assembly stresses that can be introduced during fabrication, and more widespread and uniform use of the best existing methods.

Besuner, P. M.↗

NASA NTRS1986

Index of aerospace mechanisms symposia proceedings 1-19

This index, organized in five sections (by symposium, by title, by author, by subject, and by project), brings together information on the first 19 Aerospace Mechanisms symposia. Key words are included, cross-referencing all the symposia, and the eighteenth and nineteenth symposia are cross-indexed by project. The Aerospace Mechanisms symposia are devoted to discussions of design, fabrication, test, and operational use of aerospace mechanisms; this is the first index that compiles information on symposia held from 1966 through 1985.

Rinaldo, A.↗

NASA NTRS1986

Evolutionary significance of osmoregulatory mechanisms in cyanobacteria

Physiological processes of all life forms on this planet are intrinsically related to their intracellular water potential. The overall goal was the elucidation of the mechanism(s) whereby the first oxygenic phtoautotrophs (the cyanobacteria) adjust their water potential to that of a changing external water potential (that is, osmoregulate). Osmoregulation is achieved by intracellular adjustment of inorganic and/or organic solutes (osmolytes) involving specific biochemical mechanisms. Structural and biochemical evolution within the cyanobacteria is believed completed (and fixed in present day forms) by the end of the Precambrain eon. Therefore, research using cyanobacteria of all three structural types (unicellular, filamentous, and branched), each grown in the photoautotrophic (PA), photoheterotrophic (PG), and chemotrophic (CH) modes of nutrition, should provide insight into the origin and evolution of the photosynthetically related osmoregulatory mechanisms of eukaryotic organisms. The chloroplasts of these organisms are phylogenetically related to the cyanobacteria.

Yopp, J. H.↗

NASA NTRS1986

Tether pointing platform and space elevator mechanisms analysis of the key concepts for SATP and scaled SATP

The key concepts for a scaled and full model Science and Applications Tethered Platform (SATP) are analysized. This includes a tether pointing platform and a space elevator. The mechanism concepts and technological solutions are given. The idea of the tether pointing platform mechanism is to control and stabilize the attitude of a platform by means of a movable tether. The idea of the space elevator mechanism for a scaled SATP is to drag the tether gripping it between two rotating wheels.

Turci, E.↗

NASA NTRS1985

Thermal-mechanical response to simple shear extension

The mechanism of extension in the continental crust is apparently much more complex than that acting in the oceanic lithosphere. Recently, Wernicke has proposed that a significant fraction of extension in the continental lithosphere may occur by a simple shear mechanism along discrete fault/shear zones which cut the crust, and perhaps extend into the uppermost mantle. Clearly much of the surface evidence for extension supports this concept, but the depth extent of simple shear extension in the continental crust is unclear. Using numerical simulations, the thermal and associated mechanical behavior of the continental lithosphere in response to lithosphere extension along a low-angle simple shear zone which cuts through the lithospheric plate was determined in order to evaluate the resolving ability of thermal (heat flow and metamorphic P-T-time paths) and elevation observations in constraining the mode of continental extension.

Furlong, K. P.↗

NASA NTRS1985

On the maintenance of sunspots - An ion hurricane mechanism

Inward and downflow motions below the photosphere are considered to be a means of cooling and powering sunspot dynamics. Parker's superadiabatic effect is examined with attention focused on the energetics involved in ionization advection. The current analysis enhances Parker's mechanism by allowing for a 2 m/s downflow velocity at 2000 km depth to significantly reduce the photospheric irradiance to near umbral intensities. Similarities between sunspots and terrestrial hurricanes are noted, and it was found that ionization energy plays the same role in sunspots as latent energy plays in terrestrial weather systems. Based on the hypothesis that magnetic fields are important in organizing the motions on the sun, some understanding is provided of: (1) the instability which drives the cooling mechanism for sunspots, (2) the low latitude appearance of sunspots, (3) active region development with faculae following sunspot growth, (4) the role of the fluid in maintaining the magnetic field and the role of the field as a focal point for the fluid downflow, (5) the heating mechanism and structure of faculae, (6) energy balance in active regions, and (7) the behavior difference of pores and ephemeral active regions in relation to ordinary sunspots and active regions.

Schatten, K. H.↗

NASA NTRS1987

Rotary Drive Mechanism Accepts Two Inputs

Mechanism connects two drives to single output shaft without clutches or planetary gears. More reliable than clutch-based two-drive mechanism and less bulky than planetary mechanism. Moreover, designed for any ratio of output to input speed, including an 1:1 ratio, unlike planetary gears. Drives operate simultaneously or separately.

Webster, Larry D.↗

NASA NTRS1987

The classification of wind shears from the point of view of aerodynamics and flight mechanics

A study of international statistical data shows that in about three quarters of all serious accidents which occurred with jet propelled airliners wind shear was either one of the main causes of the accident or represented a major contributory cause. Wind shear related problems are examined. The necessity of a use of different concepts, definitions, and divisions is explained, and the concepts and definitions required for the division of wind and wind shear into different categories is discussed. A description of the context between meteorological and aerodynamics-flight mechanics concepts, definitions, and divisions is also provided. Attention is given to wind and wind components, general characteristics of wind shear and the meteorological terms, the basic types of wind shear for aerodynamics-flight mechanics investigations, special types of wind shear for aerodynamics-flight mechanics investigations, and possibilities regarding a change of the wind component.

Seidler, Fritz↗

NASA NTRS1985

Free-jet investigation of mechanically suppressed, high radius ratio coannular plug model nozzles

The experimental and analytical acoustic results of a scale-model investigation or unsuppressed and mechanically suppressed high-radius ratio coannular plug nozzles with inverted velocity and temperature profiles are summarized. Nine coannular nozzle configurations along with a reference conical nozzle were evaluated in the Anechoic Free-Jet Facility for a total of 212 acoustic test points. Most of the tests were conducted at variable cycle engine conditions applicable to advanced high speed aircraft. The tested nozzles included coannular plug nozzles with both convergent and convergent-divergent (C-D) terminations in order to evaluate C-D effectiveness in the reduction of shock-cell noise and 20 and 40 shallow-chute mechanical suppressors in the outer stream in order to evaluate their effectiveness in the reduction of jet noise. In addition to the acoustic tests, mean and turbulent velocity measurements were made on selected plumes of the 20 shallow-chute configuration using a laser velocimeter. At a mixed jet velocity of 700 m/sec, the 20 shallow-chute suppressor configuration yielded peak aft quadrant suppression of 11.5 and 9 PNdB and forward quadrant suppression of 7 and 6 PNdB relative to a baseline conical nozzles during static and simulated flight, respectively. The C-D terminations were observed to reduce shock-cell noise. An engineering spectral prediction method was formulated for mechanically suppressed coannular plug nozzles.

Janardan, B. A.↗

NASA NTRS1987

The 21st Aerospace Mechanisms Symposium

During the symposium technical topics addressed included deployable structures, electromagnetic devices, tribology, actuators, latching devices, positioning mechanisms, robotic manipulators, and automated mechanisms synthesis. A summary of the 20th Aerospace Mechanisms Symposium panel discussions is included as an appendix. However, panel discussions on robotics for space and large space structures which were held are not presented herein.

Source record↗

NASA NTRS1987

Experiences of CNES and SEP on space mechanisms rotating at low speed

Some aspects of knowledge acquired in the field of space mechanisms by Societe Europeenne de Propulsion and Centre National d'Etudes Spatiales in International and French National space programs are described. The experience described centers on the development of these programs: The MEGS (Mechanisme d'Etrainement du Generateur Solaire), and the MOGS (Mechanisme d'Orientation de Generateur Solaire), both solar array drive mechanisms. Key design areas and the mechanism performance obtained are highlighted. Some test problems with the MEGS sliprings are discussed.

Atlas, G.↗

NASA NTRS1986

A mechanism for tectonic deformation on Venus

In the absence of identifiable physiographic features directly associated with plate tectonics, alternate mechanisms are sought for the intense tectonic deformation observed in radar images of Venus. One possible mechanism is direct coupling into an elastic lithosphere of the stresses associated with convective flow in the interior. Spectral Green's function solutions have been obtained for stresses in an elastic lithosphere overlying a Newtonian interior with an exponential depth dependence of viscosity, and a specified surface-density distribution driving the flow. At long wavelengths and for a rigid elastic/fluid boundary condition, horizontal normal stresses in the elastic lid are controlled by the vertical shear stress gradient and are directly proportional to the depth of the density disturbance in the underlying fluid. The depth and strength of density anomalies in the Venusian interior inferred by analyses of long wavelength gravity data suggest that stresses in excess of 100 MPa would be generated in a 10 km thick elastic lid unless a low viscosity channel occurring beneath the lid or a positive viscosity gradient uncouples the flow stresses. The great apparent depth of compensation of topographic features argues against this, however, thus supporting the importance of the coupling mechanism. If there is no elastic lid, stresses will also be very high near the surface, providing also that the viscosity gradient is negative.

Phillips, Roger J.↗

NASA NTRS1986

A computerized test system for thermal-mechanical fatigue crack growth

A computerized testing system to measure fatigue crack growth under thermal-mechanical fatigue conditions is described. Built around a servohydraulic machine, the system is capable of a push-pull test under stress-controlled or strain-controlled conditions in the temperature range of 25 to 1050 C. Temperature and mechanical strain are independently controlled by the closed-loop system to simulate the complex inservice strain-temperature relationship. A d-c electrical potential method is used to measure crack growth rates. The correction procedure of the potential signal to take into account powerline and RF-induced noises and thermal changes is described. It is shown that the potential drop technique can be used for physical mechanism studies and for modelling crack tip processes.

Marchand, N.↗

NASA NTRS1987

Mechanical properties and morphology of poly(etheretherKetone)

Mechanical properties and morphology of poly(etheretherketone) (PEEK) were studied for samples having different thermal histories. Isothermal and rate-dependent crystallization were studied to ascertain the relationship between crystallinity/morphology and processing condition. Degree of crystallinity and microstructure were controlled by cooling the melt at different rates, ranging from quenching to slowly cooling, and by annealing amorphous material above the glass transition temperature Tg. It is found that degree of crystallinity was not as important as processing history in determining the room temperature mechanical properties. Samples with the same degree of crystallinity had very different tensile properties, depending on rate of cooling from the melt. All samples yielded by shear band formation and necked down. Quenched films had the largest breaking strains, drawing to 270 percent. Slowly cooled films exhibited ductile failure at relatively low strains. Best combined mechanical properties were obtained from semicrystalline films cooled at intermediate rates from the melt.

Cebe, Peggy↗

NASA NTRS1987

Transform fault earthquakes in the North Atlantic: Source mechanisms and depth of faulting

The centroid depths and source mechanisms of 12 large earthquakes on transform faults of the northern Mid-Atlantic Ridge were determined from an inversion of long-period body waveforms. The earthquakes occurred on the Gibbs, Oceanographer, Hayes, Kane, 15 deg 20 min, and Vema transforms. The depth extent of faulting during each earthquake was estimated from the centroid depth and the fault width. The source mechanisms for all events in this study display the strike slip motion expected for transform fault earthquakes; slip vector azimuths agree to 2 to 3 deg of the local strike of the zone of active faulting. The only anomalies in mechanism were for two earthquakes near the western end of the Vema transform which occurred on significantly nonvertical fault planes. Secondary faulting, occurring either precursory to or near the end of the main episode of strike-slip rupture, was observed for 5 of the 12 earthquakes. For three events the secondary faulting was characterized by reverse motion on fault planes striking oblique to the trend of the transform. In all three cases, the site of secondary reverse faulting is near a compression jog in the current trace of the active transform fault zone. No evidence was found to support the conclusions of Engeln, Wiens, and Stein that oceanic transform faults in general are either hotter than expected from current thermal models or weaker than normal oceanic lithosphere.

Bergman, Eric A.↗

NASA NTRS1984

Mechanics of Composite Materials: Past, Present and Future

Composite mechanics disciplines are presented and described at their various levels of sophistication and attendant scales of application. Correlation with experimental data is used as the prime discriminator between alternative methods and level of sophistication. Major emphasis is placed on: (1) where composite mechanics has been; (2) what it has accomplished; (3) where it is headed, based on present research activities; and (4) at the risk of being presumptuous, where it should be headed. The discussion is developed using selected, but typical examples of each composite mechanics discipline identifying degree of success, with respect to correlation with experimental data, and problems remaining. The discussion is centered about fiber/resin composites drawn mainly from the author's research activities/experience spanning two decades at Lewis.

Chamis, Christos C.↗