Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

High-resolution X-ray and radio maps of the millisecond pulsar

The 1.5 millisecond pulsar (PSR1937+214) discovered in the radio source 4C21.53 is more closely located and characterized. High-resolution radio maps of the region were obtained with the Very Large Array, and no evidence was found in the morphology of 4C21.53 to connect it with the pulsar, which was determined to be at a different distance. A high-resolution imager X-ray map of the region was made using the Einstein Observatory, and no detectable X-ray emission could be associated with either 4C21.53 or the pulsar. From the stringent upper limit on X-ray emissions, substantial differences in the magnetospheric structure of the pulsar compared to that of other radio pulsars are inferred.

Becker, R. H.↗
NASA NTRS1983

A prospectus on airborne laser mapping systems

Airborne laser systems have demonstrated enormous potential for topographic and bathymetric mapping. Both profiling and scanning systems have been evaluated for terrain elevation mapping, stream valley cross-section determination, and nearshore bottom profiling. Performance of the laser systems has been impressive and for some applications matches current operational accuracy requirements. Determining the position of individual laser measurements remains a constraint for most applications. Laser technology constrains some terrain and bathymetric applications, particularly for water penetration and frequency of measurements for high-spatial resolution over large areas.

Link, L. E.↗
NASA NTRS1983

Nimbus 7 total ozone mapping spectrometer (TOMS) data during the Gap, France, ozone intercomparisons of June 1981

The Nimbus 7 Total Ozone Mapping Spectrometer (TOMS) data over Europe have been processed for 2 days of the ozone sensor intercomparison balloon campaign in June 1981 at Gap, France. The June 19 TOMS map shows an elongated ozone maximum (about 400 D.U) extending in a NW-SE direction across central Europe and an ozone minimum (300 D.U.) in the central Atlantic. This pattern produces a 12 D.U. decrease along the balloon trajectory from the fist ascent to the second descent. On June 26 a much smaller ozone maximum (400 D.U.) is centered in northern France with its main axis running in a SW-NE direction. The total ozone contours tend to lie parallel to the balloon trajectory so that the total ozone during the flight is nearly constant.

Krueger, A. J.↗
NASA NTRS1982

Global maps of oceanographic and atmospheric parameters from the Seasat SMMR

The Seasat satellite was launched by the U.S. in June 1978, to demonstrate techniques for, and the utility of, microwave remote sensing of the ocean surface. One of the instruments on board was a scanning multichannel microwave radiometer (SMMR), designed to measure primarily ocean surface temperature, ocean surface wind speed, atmospheric water vapor and cloud liquid water. Global maps of these parameters have been produced, representing 10-day, monthly and mission (90-day) averages of the radiometer measurements. These maps are compared with those derived from conventional surface measurements, and demonstrate the day and night, nearly all-weather capabilities of the microwave measurements.

Njoku, E. G.↗
NASA NTRS1983

VLBI maps of 3C 273 and 3C 345 at 2.3 GHz

Maps of the quasars 3C 273 and 3C 345 made at 2.3 GHz with an eight station VLBI array are presented. Five compact components spanning 45 milli-arcsec are seen in 3C 273, and four are seen in 3C 345. Comparisons with maps at higher and lower frequencies show that in both sources the core, which dominates the high-frequency 'core-jet' structure, is strongly self-absorbed at 2.3 GHz and below. The jet components have flat spectra, peaking between 2 and 5 GHz. In both sources the VLBI jet curves toward the direction of the arcsecond-scale outer jet.

Cohen, M. H.↗
NASA NTRS1983

Progress In The Scene-To-Map Registration Investigation

The geometric accuracy of the scene-to-map registration process for P-format LANDSAT MSS data for scenes from Kansas and Louisiana/Mississippi is discussed. Large scale row and column bias values and row and column standard deviation values were measured for the P-format data sets indicating a poor georegistration accuracy for these geometrically corrected LANDSAT MSS scenes. Experimental work is underway with A-format LANDSAT MSS scenes from the same locations to examine the influence of the number of ground control points and the spatial distribution of ground control points on geometric registration accuracy. An early conclusion from this work is that the root mean square approach for assessing how well the ground control points fit the mapping equations measures a different aspect of georegistration accuracy than does the approach of evaluating the bias (offset) and standard deviation using independently chosen ground reference points.

Dow, D. D.↗
NASA NTRS1984

Numerical modeling of D-mappings with applications to chemical kinetics

Numerical modeling of D-mappings was studied and applied to solving nonlinear stiff systems. These mappings were locally linearized for convergence analysis, and some applications were made to chemical kinetics. The technique avoids using multistep implicit codes that require inversion of Jacobian matrices, but depends on the Jacobians for its convergence analysis.

Dey, S. K.↗
NASA NTRS1979

Heat Capacity Mapping Radiometer (HCMR) data processing algorithm, calibration, and flight performance evaluation

The rationale and procedures used in the radiometric calibration and correction of Heat Capacity Mapping Mission (HCMM) data are presented. Instrument-level testing and calibration of the Heat Capacity Mapping Radiometer (HCMR) were performed by the sensor contractor ITT Aerospace/Optical Division. The principal results are included. From the instrumental characteristics and calibration data obtained during ITT acceptance tests, an algorithm for post-launch processing was developed. Integrated spacecraft-level sensor calibration was performed at Goddard Space Flight Center (GSFC) approximately two months before launch. This calibration provided an opportunity to validate the data calibration algorithm. Instrumental parameters and results of the validation are presented and the performances of the instrument and the data system after launch are examined with respect to the radiometric results. Anomalies and their consequences are discussed. Flight data indicates a loss in sensor sensitivity with time. The loss was shown to be recoverable by an outgassing procedure performed approximately 65 days after the infrared channel was turned on. It is planned to repeat this procedure periodically.

Bohse, J. R.↗
NASA NTRS1984

Study of the mapping of Navier-Stokes algorithms onto multiple-instruction/multiple-data-stream computers

Implicit approximate-factored algorithms have certain properties that are suitable for parallel processing. A particular computational fluid dynamics (CFD) code, using this algorithm, is mapped onto a multiple-instruction/multiple-data-stream (MIMD) computer architecture. An explanation of this mapping procedure is presented, as well as some of the difficulties encountered when trying to run the code concurrently. Timing results are given for runs on the Ames Research Center's MIMD test facility which consists of two VAX 11/780's with a common MA780 multi-ported memory. Speedups exceeding 1.9 for characteristic CFD runs were indicated by the timing results.

Eberhardt, D. S.↗
NASA NTRS1984

Analysis of LANDSAT-4 TM Data for Lithologic and Image Mapping Purpose

Lithologic mapping techniques using the near infrared bands of the Thematic Mapper onboard the LANDSAT 4 satellite are investigated. These methods are coupled with digital masking to test the capability of mapping geologic materials. Data are examined under medium to low Sun angle illumination conditions to determine the detection limits of materials with absorption features. Several detection anomalies are observed and explained.

Podwysocki, M. H.↗
NASA NTRS1984

Assessment of Computer-based Geologic Mapping of Rock Units in the LANDSAT-4 Scene of Northern Death Valley, California

Results from a series of geologic classifications conducted on a thematic mapper subscene of the northern Death Valley, California are reported. Measurements of accuracy are made through comparison with the 1977 edition of the Death Valley geologic sheet. This employs a simplified map version which is registered by computer to the image data base, allowing a pixel by pixel match with the classified scene. The results show accuracy ranges from 36 to 79% depending on the type of classifier used and the statistical adjustments made to the data. Accuracy values in identifying geologic units were 2 to 3 times higher for those in the relatively flat valleys than for units in the rugged mountainous terrain. Improvements in accuracy will be sought by correcting for slope/aspect variations in mountainous terrain using topographic data recorded in Defense Mapping Agency (DMA) tapes. The above classification results will also be compared with ratio and principal component image classifications made from the same scene.

Short, N. M.↗
NASA NTRS1983

Quasiconformal mappings and grid generation

A finite difference scheme is developed for constructing quasiconformal mappings for arbitrary simply and doubly connected regions. Computational grids are generated to reduce elliptic equations to canonical form. Examples of conformal mappings on surfaces are also included.

Mastin, C. W.↗
NASA NTRS1983

Mapping project on land use changes in the carboniferous region of Santa Catarina

The utilization of remote sensing data for monitoring land use changes by means of digital image analysis is described. The following data were utilized: LANDSAT data from September 4, 1975, April 24, 1978, and September 8, 1981; LANDSAT paper photography data; area IV color photographs; IBGE topography maps, and auxiliary data about the Brazilian state of Santa Catarina. Three kinds of analyses of digital images were carried out. The project identified and mapped major classes of land use areas including urban areas, coal deposits, agricultural areas, forests, lakes, and flood plains. Five areas directly affected by coal exploration southeast of Santa Catarina are identified and described. In addition, the classification system used for organizing data about land cover in a hierarchical arrangement is presented. The project made use of two remote sensing data sources: data of MSS spectral (Mulitspectral Scanner System)/LANDSAT on a scale of 1:100,000 with approximately 80 m resolution, and infrared color aerial photographs on a scale of 1:45,000 with approximately 5 m resolution. Therefore, the classification system included three levels, two selected to be compatible with aerial photography data and the third to conform to the resolution of MSS/LANDSAT.

Valeriano, D. D.↗
NASA NTRS1984

Fabrication of glass gas cells for the HALOE and MAPS satellite experiments

The Halogen Occultation Experiment (HALOE) and the Measurement of Air Pollution from Satellites (MAPS) experiment are satellite-borne experiments which measure trace constituents in the Earth's atmosphere. The instruments which obtain the data for these experiments are based on the gas filter correlation radiometer measurement technique. In this technique, small samples of the gases of interest are encapsulated in glass cylinders, called gas cells, which act as very selective optical filters. This report describes the techniques employed in the fabrication of the gas cells for the HALOE and MAPS instruments. Details of the method used to fuse the sapphire windows (required for IR transmission) to the glass cell bodies are presented along with detailed descriptions of the jigs and fixtures used during the assembly process. The techniques and equipment used for window inspection and for pairing the HALOE windows are discussed. Cell body materials and the steps involved in preparing the cell bodies for the glass-to-sapphire fusion process are given.

Sullivan, E. M.↗
NASA NTRS1982

Agricultural land cover mapping with the aid of digital soil survey data

A study is recounted which assessed the effect of stratifying multidate Landsat MSS data on land cover classification accuracy. The study area covered 49,184 ha (121,534 acres) in Gentry County in northwestern Missouri. A pixel-by-pixel comparison of the two land cover classifications with field-verified land cover indicated improvements in identification of all cover types when land areas were stratified by soils. The introduction of soil map information to the land cover mapping process can improve discrimination of land cover types and reduce confusion among crop types that may be caused by soil-specific management practices, soil-induced crop development differences, and background reflectance characteristics.

Stoner, E. R.↗
NASA NTRS1984

Objective assessment of Advanced Very High Resolution Radiometer data for land cover mapping

The validity of using data from the Advanced Very High Resolution Radiometer (AVHRR) of the satellites NOAA-6 and NOAA-7 for land cover mapping is assessed by making comparisons with much higher resolution LANDSAT multi-spectral scanner (MSS) data. Near synchronous data for both systems are analysed for test sites in the Imperial Valley, California, the Nile Delta, and southern Italy. The results strongly indicate that despite the very coarse resolution of the AVHRR data compared with conventional MSS data they are sufficiently strongly correlated to suggest that the former have significant potential for land cover mapping, especially at small scales and for large areas. Hence the outstanding benefits of AVHRR data, namely their high temporal frequency, relative cheapness and low data volumes for image processing, may readily be taken advantage of for such tasks.

Townshend, J. R. G.↗
NASA NTRS1983

A new method for mapping multidimensional data to lower dimensions

A multispectral mapping method is proposed which is based on the new concept of BEND (Bidimensional Effective Normalised Difference). The method, which involves taking one sample point at a time and finding the interrelationships between its features, is found very economical from the point of view of storage and processing time. It has good dimensionality reduction and clustering properties, and is highly suitable for computer analysis of large amounts of data. The transformed values obtained by this procedure are suitable for either a planar 2-space mapping of geological sample points or for making grayscale and color images of geo-terrains. A few examples are given to justify the efficacy of the proposed procedure.

Gowda, K. C.↗
NASA NTRS1984

Mapping convection in the mantle

Long-period (100-250 sec.) Love and Rayleigh waves are used to map heterogeneity and azimuthal anisotropy in the upper mantle. Spherical harmonic descriptions of anisotropy up to l = m = 3 and 2 theta are derived. Azimuthal anisotropy obtains values as high as 1.5 percent. There is good correlation of fast Rayleigh wave directions with upper mantle return flow directions derived from kinematic considerations. This is consistent with a-axis of olivine being aligned in the flow direction. The main differences between the flow models and the Rayleigh wave azimuthal variation maps occur in the vicinity of hotspots. The correlation of azimuthal anisotropy with upper mantle return flow directions, rather than with plate directions, suggests that part of the return flow is in the upper mantle and this, in turn, implies a low viscosity channel.

Tanimoto, T.↗