Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lightweight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Mechanically Robust, Ultraelastic Hierarchical Foam with Tunable Properties via 3D Printing

We present a mechanically robust, ultraelastic foam with controlled multiscale architectures and tunable mechanical/conductive performance is fabricated via 3D printing. Hierarchical porosity, including both macro- and microscaled pores, are produced by the combination of direct ink writing (DIW), acid etching, and phase inversion. The thixotropic inks in DIW are formulated by a simple one-pot process to disperse duo nanoparticles (nanoclay and silica nanoparticles) in a polyurethane suspension. The resulting lightweight foam exhibits tailorable mechanical strength, unprecedented elasticity (standing over 1000 compression cycles), and remarkable robustness (rapidly and fully recover after a load more than 20 000 times of its own weight). Surface coating of carbon nanotubes yields a conductive elastic foam that can be used as piezoresistivity sensor with high sensitivity. For the first time, this strategy achieves 3D printing of elastic foam with controlled multilevel 3D structures and mechanical/conductive properties. In conclusion, the facile ink preparation method can be utilized to fabricate foams of various materials with desirable performance via 3D printing.

36 MATERIALS SCIENCE↗

The Stomatopod Telson: Convergent Evolution in the Development of a Biological Shield

Mantis shrimp are aggressive marine crustaceans well known for their rapid and powerful hunting strategies. Less well known, yet, is the ability of some species of mantis shrimp to defend themselves from the repeated blows of conspecifics during ritualized fighting using a shield-like segment of abdominal armor called the telson. Multiscale structure–mechanical property relationships of this damage-tolerant biological composite is examined in order to reveal strategies that nature uses for resisting failure from repeated high-energy impacts. The telson structures of the smashing-type species, Odontodactylus scyllarus , and the less aggressive spearing-type species, Lysiosquillina maculata , are compared in order to better understand the ecological pressures driving the formation and use of the telson as a biological shield. A higher bulk compressive stiffness is identified within the smasher telson, which is attributed to its concave macromorphology, thicker cuticle, and higher degree of mineralization within its exocuticle. The presence of ridges at the dorsal surface indicates a role in imparting compliance for energy absorption. Fracture analysis identifies an enhanced toughening mechanism of crack twisting within the smasher telson, attributed to its well-defined pitch-graded helicoidal fibrous micro-architecture. Such findings may prove useful for the design of lightweight composite materials with potential flexibility and improved damage tolerance.

60 APPLIED LIFE SCIENCES↗

Polyacrylonitrile Interactions with Carbon Nanotubes in Solution: Conformations and Binding as a Function of Solvent, Temperature, and Concentration

Abstract Polyacrylonitrile (PAN) is among the most promising precursor polymers to produce strong and lightweight carbon fiber. Conformations in solution and the extent of binding to carbon nanotubes (CNTs) are critical during gel spinning and for alignment of graphitic layers upon carbonization. Here, quantitative insights into these processes are reported using molecular dynamics simulations at the atomic scale including virtual π electrons and comparisons to experimental data. Common solvents for fiber spinning induce significant differences in PAN conformation in dilute solutions at 25 °C with persistence lengths between 0.5 and 2 nm. Variations in conformation become smaller at 75 °C, in the presence of CNTs, and at higher PAN concentration. “Aging” of PAN conformations in dimethylformamide and dimethylsulfoxide at higher temperature is explained and a correlation between extended polymer conformations and increased binding to CNTs is identified in dilute solutions. PAN is overall barely attracted to CNTs under common solution conditions and enters significant surface contact only at higher concentration as solvent is physically removed. The impact of temperature is small, whereby binding increases at lower temperatures. The results provide guidance to control interactions of polymers with CNTs to induce distinct conformations and specific binding at the early stages of assembly.

Pramanik, Chandrani↗

Photo-Curing 3D Printing of Thermosetting Sacrificial Tooling for Fabricating Fiber-Reinforced Hollow Composites

Carbon fiber-reinforced hollow composites play a vital role in lightweighting modern cars and aircrafts. Fabrication of such hollow composites with seamless internal finish requires sacrificial tooling that can be used under pressure and high temperature. For the very first time, high performance sacrificial tooling that can be used to fabricate fiber-reinforced hollow composites is produced using photocuring 3D printing technology. This is achieved by developing UV-curable resins containing highly soluble yet hydrolysable acetal acrylate cross-linker and hydrophilic 4-acryloylmorpholine monomer. It is found that the cross-linker content greatly affects the printing speed. Further, the widely adopted UV post-curing method is found to have negligible impact on improving the thermal-mechanical properties of printed structures. Additionally, after thermal post-treatment, printed sacrificial tooling exhibits a heat deflection temperature of 112 °C at 0.455 MPa and an average coefficient of linear thermal expansion of 59 ppm °C -1 between 30 and 100 °C. As a result, printed tooling enables fabrication of carbon fiber-reinforced hollow composites with complex geometry, which shows a tensile strength of 802 MPa and an elastic modulus of 50.2 GPa.

36 MATERIALS SCIENCE↗

Charge‐Programmable Photopolymers for 3D Electronics via Additive Manufacturing

Charge‐programmed 3D printing enables the fabrication of 3D electronics with lightweight and high precision via selective patterning of metals. This selective metal deposition is catalyzed by Pd nanoparticles that are specifically immobilized onto the charged surface and promises to fabricate a myriad of complex electronic devices with self‐sensing, actuation, and structural elements assembled in a designed 3D layout. However, the achievable property space and the material‐performance correlation of the charge‐programmed printing remain unexplored. Herein, a series of photo‐curable resins are designed for unveiling how the charge and crosslink densities synergistically impact the nanocatalyst‐guided selective deposition in catalytic efficiency and properties of the 3D printed charge‐programmed architectures, leading to high‐quality 3D patterning of solid and liquid metals. The findings offer a wide tunability of the structural properties of the printed electronics, ranging from stiff to extreme flexibility. Capitalizing on these results, the printing and successful application of an ultralight‐weight and deployable 3D multi‐layer antenna system operating at an ultrahigh‐frequency of 19 GHz are demonstrated.

36 MATERIALS SCIENCE↗

Origami‐Based Reconfigurable Metamaterials for Tunable Chirality

Origami is the art of folding two‐dimensional (2D) materials, such as a flat sheet of paper, into complex and elaborate three‐dimensional (3D) objects. This study reports origami‐based metamaterials whose electromagnetic responses are dynamically controllable via switching the folding state of Miura‐ori split‐ring resonators. The deformation of the Miura‐ori unit along the third dimension induces net electric and magnetic dipoles of split‐ring resonators parallel or anti‐parallel to each other, leading to the strong chiral responses. Circular dichroism as high as 0.6 is experimentally observed while the chirality switching is realized by controlling the deformation direction and kinematics. In addition, the relative density of the origami metamaterials can be dramatically reduced to only 2% of that of the unfolded structure. These results open a new avenue toward lightweight, reconfigurable, and deployable metadevices with simultaneously customized electromagnetic and mechanical properties.

Wang, Zuojia↗

Mutually Reinforced Polymer–Graphene Bilayer Membranes for Energy‐Efficient Acoustic Transduction

Abstract Graphene holds promise for thin, ultralightweight, and high‐performance nanoelectromechanical transducers. However, graphene‐only devices are limited in size due to fatigue and fracture of suspended graphene membranes. Here, a lightweight, flexible, transparent, and conductive bilayer composite of polyetherimide and single‐layer graphene is prepared and suspended on the centimeter scale with an unprecedentedly high aspect ratio of 10 5 . The coupling of the two components leads to mutual reinforcement and creates an ultrastrong membrane that supports 30 000 times its own weight. Upon electromechanical actuation, the membrane pushes a massive amount of air and generates high‐quality acoustic sound. The energy efficiency is ≈ 10–100 times better than state‐of‐the‐art electrodynamic speakers. The bilayer membrane's combined properties of electrical conductivity, mechanical strength, optical transparency, thermal stability, and chemical resistance will promote applications in electronics, mechanics, and optics.

Khan, Assad U.↗

Radiation‐Resistant Aluminum Alloy for Space Missions in the Extreme Environment of the Solar System

Future human exploration of the solar system demands advanced materials capable of withstanding extreme environments, particularly exposure to solar energetic particle radiation. Current material selection criteria for space applications prioritize a high strength-to-weight ratio, high corrosion resistance and manufacturability, favoring age-hardenable Al-based alloys. However, conventional precipitation-hardened Al alloys suffer from irradiation-assisted dissolution of strengthening phases at doses as low as 0.2 displacements-per-atom (dpa), undermining their performance. Furthermore, these alloys develop radiation-induced defects, such as dislocation loops and voids, even at low doses. This study presents a novel ultrafine-grained (UFG) Al-based alloy, designed using the crossover alloying concept and strengthened by T-phase precipitates, featuring a chemically-complex structure with 162 atoms in its unit cell composed of Mg 32 (Zn,Al) 49 . It is showed that T-phase precipitates have exceptional radiation tolerance up to 24 dpa. Owing to the nanoscale UFG structure, dislocation loops are suppressed, and voids are only observed beyond 75 dpa. Microtensile tests up to 20 dpa confirm the preservation of mechanical performance under irradiation. The results underline the potential of this alloy as a radiation-resistant, lightweight material for future space applications. Three key strategies enable this performance: (i) stabilization of a UFG microstructure, (ii) T-phase precipitation featuring a highly negative Gibbs free energy and chemically-complex giant unit cell, and (iii) precise process control to prevent grain growth during heat treatment and irradiation.

36 MATERIALS SCIENCE↗

Water‐Assisted Liftoff of Polycrystalline CdS/CdTe Thin Films Using Heterogeneous Interfacial Engineering

Abstract Recent advances in device design and process optimizations have enabled the production of CdTe devices on flexible substrates, but the necessary high‐temperature processing (>450 °C) to recrystallize grains limits the use of alternative lightweight substrates. Here, a new synthesis method is reported to create a freestanding CdS/CdTe film by combining high‐temperature depositions (CdS/CdTe on Si/SiO 2 ) and a simple lift‐off process in a water environment at room temperature. Analysis of the results indicate that the delamination is facilitated by the innate lattice mismatch as well as the presence of an unexpected Te‐rich layer (≈20 nm), which accumulates on the SiO 2 surface. High‐resolution electron microscopy and spectroscopy measurements confirm that the CdS/CdTe film is physically liberated from the substrate without leaving any residue, while also preserving their initial structural and compositional properties.

Magginetti, David J.↗

Thermodynamic Stability and Site‐Specific Distribution of Graphitic and Pyridinic Nitrogen in Graphene Moiré on Ru(0001)

Abstract Graphene‐like materials are of interest for large‐scale hydrogen storage applications due to their lightweight, durable, and scalable properties. Nitrogen‐doping minimizes kinetic limitations in diffusion and recombination on surfaces, however, the role of graphitic nitrogen (GN) and pyridinic nitrogen (PN) is not well understood. Nitrogen‐doped graphene is synthesized on Ru(0001) using chemical vapor deposition (CVD) of pyridine and ion irradiation. Scanning tunneling microscopy (STM), x‐ray photoelectron spectroscopy (XPS), and density functional theory (DFT) are used to identify the structure, location, and thermodynamic stability of nitrogen species within the graphene moiré. CVD of pyridine results in a low nitrogen concentration (<0.1at%), while the post‐growth nitrogen ion irradiation allows us to increase the concentration further. The concentration of GN and PN is controlled by varying the ion dose and annealing temperature. Comparison of measured and simulated STM images of GN and PN yield an excellent agreement, allowing us to confidently establish that GN is preferentially located near the center of the Atop region, while PN is located in the valley region of the graphene moiré. This report explicitly confirms the site assignments and provides a foundation for the site synthesis and analysis of structural and electronic properties that drive the reactivity of N‐doped graphene.

Gedara, Buddhika S. A. [Physical and Computational↗

Carbon Fiber and Syntactic Foam Hybrid Materials via Core–Shell Material Extrusion Additive Manufacturing

Abstract Biological materials often employ hybrid architectures, such as the core–shell (C–S) motif present in porcupine quills and plant stems, to achieve unique specific properties and performance. Drawing inspiration from these natural materials, a new method to fabricate lightweight and stiff C–S architected filaments is reported. Specifically, a C–S printhead conducive to printing highly loaded fiber‐filled inks, as well as a new low‐density syntactic foam ink, are utilized to 3D‐print C–S architectures consisting of a syntactic epoxy foam core surrounded by a stiff carbon fiber‐reinforced epoxy composite shell. Effective printing of test specimens and structures with controlled geometry, composition, and architecture is demonstrated. The new foam ink exhibits density as low as 0.68 g cm −3 and C–S structures exhibit up to 25% higher specific flexural stiffness ( E 1/3 /ρ) than either constituent alone. Finally, a new mechanical model is presented to predict this performance improvement while accounting for potential eccentricity of the core.

Pack, Robert C.↗

A Fiber-Based 3D Lithium Host for Lean Electrolyte Lithium Metal Batteries

3D hosts are promising to extend the cycle life of lithium metal anodes but have rarely been implemented with lean electrolytes thus impacting the practical cell energy density. To overcome this challenge, a 3D host that is lightweight and easy to fabricate with optimum pore size that enables full utilization of its pore volume, essential for lean electrolyte operations, is reported. The host is fabricated by casting a VGCF (vapor-grown carbon fiber)-based slurry loaded with a sparingly soluble rubidium nitrate salt as an additive. The network of fibers generates uniform pores of ≈3 µm in diameter with a porosity of 80%, while the nitrate additive enhances lithiophilicity. This 3D host delivers an average coulombic efficiency of 99.36% at 1 mA cm -2 and 1 mAh cm -2 for over 860 cycles in half-cell tests. Full cells containing an anode with 1.35-fold excess lithium paired with LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathodes exhibit capacity retention of 80% over 176 cycles at C/2 under a lean electrolyte condition of 3 g Ah -1 . This work provides a facile and scalable method to advance 3D lithium hosts closer to practical lithium-metal batteries.

36 MATERIALS SCIENCE↗

Subvoxel Control of Fiber Orientation via Multidirectional Shearing in 3D Printing

Anisotropy, the characteristic of materials exhibiting different properties based on their direction, is widespread in nature. Conventional manufacturing techniques often fall short in recreating such complex anisotropy. While 3D printing allows for precise fiber deposition in anisotropic composites, previous studies have only achieved bulk reorientation of fibers at the voxel level in two dimensions. This limits the replication of localized 3D anisotropies found in natural materials. To address this, a novel 3D printing technique is presented that enables subvoxel control of fiber orientation in all three directions using multidirectional shearing via nozzle rotation and inclination. The fiber orientation control in these experimental tests is driven by a numerical model, enabling a fully digital approach to program microstructures within a strand. This programmability is demonstrated through mechanical and thermal tests, illustrating a localized and controllable response to external stimuli. Achieving such complex anisotropy holds potential across several fields, including wearables and biomedical implants, lightweight composite structures, and energy storage technologies such as batteries and supercapacitors.

3D printing↗

Fibrous Materials for Flexible Li–S Battery

The lithium–sulfur (Li–S) battery is an attractive high-energy-density technology for future flexible and wearable electronics, but it is a challenge to simultaneously realize adequate flexibility, stability, and energy density. Recent studies show that fibrous materials are promising to achieve flexible batteries with high energy density, by taking advantages of their intrinsic flexibility, lightweight, large surface area, and cost-effectiveness. With a good tunability of the structure and function, fibrous materials can be suitable to construct various components of a working battery, including current collectors, buffer layers, interlayers, and solid-state electrolytes. In this review, we summarize the recent development of fibrous materials for flexible Li–S batteries, with an emphasis on the discussion of the synthesis and preparation of materials, design of fibrous structures and functionalities, and layout of battery cells for achieving high Coulombic efficiency, long cycle life, and good flexibility.

25 ENERGY STORAGE↗

Excellent antioxidizing, thermally insulating and flame resistance silica‐polybenzoxazine aerogels for aircraft ablative materials

Abstract High‐performance thermal protective composites with lightweight, micro‐ ablation and high‐efficient thermal insulation are urgently required for thermal protection systems in advanced hypersonic speed vehicles. However, the practical applications of thermal protective composites have long been hampered by the main issues such as low mass residual rate and poor long‐term antioxidation of the matrix in high‐temperature aerobic environments. Here, we report a novel silica‐polybenz oxazine (SiO 2 ‐PBO) aerogels with interpenetrated networks, possessing the ability to antioxidation, thermal insulation, and flame‐retardant properties. The resulting SiO 2 ‐PBO aerogels exhibit low density (0.25 g/cm 3 ), low thermal conductivity (0.035 W/(m·K)), and superior peak heat release rate value (15.3 W/g). Moreover, the mass residual rate is up to 70.46 wt% in the N 2 atmosphere and remains 57.83 wt% despite existing in the air atmosphere and experiencing the highest temperature of 800°C. Briefly, SiO 2 ‐PBO aerogels as‐prepared could be a potential matrix for a new gene ration of high‐performance thermal protective composites in the future.

Xiao, Yunyun↗

Synthesis and Processing by Design of High-Nickel Cathode Materials

The high demand of lightweight, high energy density batteries for energy storage promotes new materials discovery and development. Despite the large number of battery materials being discovered, very few of them have been commercially deployed, mostly bottlenecked by synthesis and processing – namely, making certain phases with the desired structure and properties to meet the multifaceted performance requirements. Alternative to the traditional trial and error, we present here an in situ study aided synthesis- and processing-by-design approach. With specific examples, we illustrate how to use the approach to identify reaction pathways in synthesis and processing of high-Nickel (Ni) cathode materials for next-generation lithium-ion batteries, thereby ensuring precise control of their structure, morphology, and surface properties. Furthermore, perspectives are provided on the wide applicability of the approach to solving critical issues inherent to high-Ni cathodes and the new directions and opportunities in the area.

36 MATERIALS SCIENCE↗

Concept of an upright wearable positron emission tomography imager in humans

Abstract Background Positron Emission Tomography ( PET ) is traditionally used to image patients in restrictive positions, with few devices allowing for upright, brain‐dedicated imaging. Our team has explored the concept of wearable PET imagers which could provide functional brain imaging of freely moving subjects. To test feasibility and determine future considerations for development, we built a rudimentary proof‐of‐concept prototype (Helmet_ PET ) and conducted tests in phantoms and four human volunteers. Methods Twelve Silicon Photomultiplier‐based detectors were assembled in a ring with exterior weight support and an interior mechanism that could be adjustably fitted to the head. We conducted brain phantom tests as well as scanned four patients scheduled for diagnostic F 18‐ FDG PET / CT imaging. For human subjects the imager was angled such that field of view included basal ganglia and visual cortex to test for typical resting‐state pattern. Imaging in two subjects was performed ~4 hr after PET / CT imaging to simulate lower injected F 18‐ FDG dose by taking advantage of the natural radioactive decay of the tracer (F 18 half‐life of 110 min), with an estimated imaging dosage of 25% of the standard. Results We found that imaging with a simple lightweight ring of detectors was feasible using a fraction of the standard radioligand dose. Activity levels in the human participants were quantitatively similar to standard PET in a set of anatomical ROI s. Typical resting‐state brain pattern activation was demonstrated even in a 1 min scan of active head rotation. Conclusion To our knowledge, this is the first demonstration of imaging a human subject with a novel wearable PET imager that moves with robust head movements. We discuss potential research and clinical applications that will drive the design of a fully functional device. Designs will need to consider trade‐offs between a low weight device with high mobility and a heavier device with greater sensitivity and larger field of view.

60 APPLIED LIFE SCIENCES↗