SEARCH · Engineering Papers

Results for “isolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Novel High-Power Microwave Circulator Employing Circularly Polarized Waves

A novel four-port circulator is presented which uses an inline ferromagnetic element to allow for transmission or reflection depending on the sense of the incident circularly polarized wave. This configuration has been shown to reduce the dependency on ferrite anisotropy and support higher power, low rf loss, operation. An analytic analysis of this device is presented here alongside corroborating cold test data of the first prototype. High-power operation was performed at 2.856 GHz, with input power levels up to 8 MW for 3.5 μs in a pressurized nitrogen environment. The results from this research not only demonstrate ability to eliminate the use of greenhouse insulators, such as SF6, but also provide conceptual groundwork for a new class of ultrahigh power (50 MW+) nonreciprocal networks including circulators, isolators, phase shifters, and rf switches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Considerations on the design of a rare isotope beam facility based on superconducting heavy ion linacs

To establish an accelerator facility based on superconducting linear accelerator (linac) for nuclear and applied sciences in Korea, the rare isotope science project started in December 2011 under the auspices of the Institute for Basic Science (IBS). The layout of the facility has been mostly frozen since 2013 and civil construction began in 2016. On the other hand, an alternative linac design option was recently investigated in collaboration with the linac development group of Argonne National Lab in search of a further optimized configuration. A new linac lattice was developed and evaluated against realistic machine errors using TRACK. The beam optics simulations and error analysis then proved the soundness of this alternative design. In addition, beam optics of the injector was studied for simultaneous acceleration of both stable and rare isotope beams with the use of an electron beam ion source (EBIS). Additionally considered are alternative options of high-power cyclotrons as ISOL driver in order to enhance the capability of rare isotope beam production and fully exploit the superconducting linac facility built at high cost.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2022

Utah FORGE GeoThermOPTIMAL Video

This is a project description video by Dr. William W. Fleckenstein related to their "Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores" R&D project at Utah FORGE which is linked bellow.

15 GEOTHERMAL ENERGY↗

DOE OSTI2020

Predicting antimicrobial resistance in Pseudomonas aeruginosa with machine learning-enabled molecular diagnostics

Limited therapy options due to antibiotic resistance underscore the need for optimization of current diagnostics. In some bacterial species, antimicrobial resistance can be unambiguously predicted based on their genome sequence. In this study, we sequenced the genomes and transcriptomes of 414 drug-resistant clinical Pseudomonas aeruginosa isolates. By training machine learning classifiers on information about the presence or absence of genes, their sequence variation, and expression profiles, we generated predictive models and identified biomarkers of resistance to four commonly administered antimicrobial drugs. Using these data types alone or in combination resulted in high (0.8–0.9) or very high (> 0.9) sensitivity and predictive values. For all drugs except for ciprofloxacin, gene expression information improved diagnostic performance. Our results pave the way for the development of a molecular resistance profiling tool that reliably predicts antimicrobial susceptibility based on genomic and transcriptomic markers. Finally, the implementation of a molecular susceptibility test system in routine microbiology diagnostics holds promise to provide earlier and more detailed information on antibiotic resistance profiles of bacterial pathogens and thus could change how physicians treat bacterial infections.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Distributed Wind Controls: A Research Roadmap for Microgrids, Infrastructure Resilience, and Controls Launchpad (MIRACL)

The Microgrids, Infrastructure Resilience, and Advanced Controls Launchpad (MIRACL) project’s controls research area aims to expand the benefits from distributed wind (DW) generation assets beyond solely providing low cost power directly to consumers. To make distributed wind turbines operate more effectively there is a need for more advanced ways to control them, allowing power companies, businesses, and energy consumers to take advantage of the unique characteristics of wind energy. DW can contribute to the safe and secure operation of grid by providing services such as voltage regulation, frequency regulation, spinning reserves, and even black start capabilities. In the larger DER context where much of the research has focused around solar technologies, the inertia available in wind technologies has generally not been considered. For wind turbines to provide these services in an optimal and expanded way, development and demonstration of control methods and communication interfaces within a grid and microgrid framework are required. In this document, NREL led the literature review in collaboration with SNL, of DER controls-focused integration research to establish a baseline for the controls research under the MIRACL project to identify specific control functions to be focused on throughout this project. This literature review focused primarily on the control functions of variable distributed generation, largely pulling from past solar PV and battery controls works, with a specific focus on applicability for distributed wind energy systems. The goal of this document is to identify a research roadmap based on the open literature and past national laboratory works to inform advanced wind turbine and power electronics control functions for four use cases: 1) distributed wind in isolated systems, 2) grid-connected microgrids (wind-hybrid systems and islanded operation), 3) behind-the-meter distributed wind applications in the power distribution systems, and 4) front-of-the-meter distributed wind applications in the power distribution systems.

17 WIND ENERGY↗

DOE OSTI2022

Reducing the Overnight Capital Cost of Advanced Reactors Using Equipment-Level Seismic Protective Systems

Consideration of the effects of earthquake shaking on the design and construction of nuclear power plants adds substantially to the overnight capital cost, with anecdotal estimates as high as 35+%, attributed to additional construction materials, need for one-off and sub-optimal designs of equipment due to conflicting design choices, the high cost of seismic qualification of equipment, and regulatory review. Safety-critical equipment in large light water reactors is designed and qualified for seismic demands imposed by the supporting reactor building, optimal mechanical designs are not possible, and designs of a given piece of equipment may vary with height above grade. Similar negative impacts are expected for advanced reactors unless the seismic design paradigm is changed. The overarching goal of this transformational MEITNER project, which involved a multidisciplinary engineering team and designers of three fundamentally different advanced reactors, was to adapt proven seismic isolation and damping technologies to operationalize modular protective systems for safety-class equipment inside advanced reactor buildings. Such seismic protective systems would be tightly integrated into design development for reactor support systems and balance-of-plant construction. The adoption of the technology, which is widely used in non-nuclear sectors, would simplify plant design, enable the use of standardized equipment and buildings, optimized for operational performance, and reduce plant size and weight. The need for site-specific equipment would be eliminated, enabling identical equipment to be used across multiple plants sited across the US and economies of scale, and catalyzing new interest and investment. The equipment-based protective systems would allow siting of advanced reactors in regions of high seismic hazard.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2020

KS4A-IsoG.1.0_FspDS682

The novel fungal strain, Fusarium sp. DS 682, was isolated from the rhizosphere of the perennial grass, Bouteloua gracilis, at the Konza Prairie Biological Station in Kansas. This fungal strain is common across North American grasslands and is resilient to environmental fluctuations. The draft genome is estimated to be 97.2% complete.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Bradyrhizobium sp. WCU1

Bradyrhizobium WCU1 was cultured from a bottle of Vienna-style lager produced in Mexico. Colonies were obtained from beer plated on R2A medium and were slow to grow. A subculture was isolated and BLAST analysis of the 16S rRNA placed it into the genus Bradyrhizobium, with four species matching it at 100% percent identity. These included B. embrapense, B. viridifuturi, B. septentrionale, and B. quebecense. Whole genome phylogenetic analysis identified the two closest relatives of Bradyrhizobium WCU1 to be B. erythrophlei and B. elkanii USDA 76, but at only 91.2 and 90.5% average nucleotide identity (ANI), respectively.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Tolumonas sp. WCU1

Tolumonas sp. WCU1 was cultured from Dicks Creek on the campus of Western Carolina University. Colonies were obtained from water plated on R2A medium. A subculture was isolated and BLAST analysis of the 16S rRNA placed it into the genus Tolumonas, with the highest match at 95.7% percent identity to T. osonensis. Whole genome phylogenetic analysis identified the three species in the genus of Tolumonas to be only 78.1 to 78.5% in average nucleotide identity (ANI). These species include T. auensis , T. osonensis, and T. lignilytica.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Mesoscale fractal whey protein particles derived from microscale linear-shaped protein assemblies (Part 1): Manufacturing method and particle characteristics

Whey protein isolates (WPI) are widely used in processed foods for their versatile functional properties. Modifying the structural properties of proteins by assembling them into mesoscale or microscale particles may improve their functionality and broaden their applications. This study aims to manufacture and characterize mesoscale whey protein particles (WPP) derived from WPI. Two types of WPP, WPP1 (0.05 mL/min) and WPP2 (0.25 mL/min), were prepared through a multistep approach involving liquid antisolvent (LAS) precipitation, heat treatment, and microfluidization. Liquid antisolvent precipitation was performed by injecting a 20% (wt/vol) WPI dispersion (pH 7) into an ethanol-glycerol mixture (75:25, vol/vol) under laminar flow, followed by heat treatment at 80°C for 20 min as a particle hardening step. This process produced stable fiber- and ribbon-shaped whey protein assemblies (WPA), which served as precursors to WPP. Subsequent microfluidization (150 MPa, 6 passages) reduced the size of WPA, yielding mesoscale WPP with irregular morphologies and a more uniform size distribution, as revealed by microscopy and dynamic light scattering. ζ-Potential and fluorescence labeling indicated higher surface charge and surface hydrophobicity of WPP compared with untreated WPI. The WPP showed internal mass fractal and surface fractal structures at larger length scales, analyzed using small-angle X-ray scattering. Fourier transform infrared spectroscopy demonstrated an increased fraction of intermolecular β-sheets in WPP, suggesting that hydrogen bonding contributed to their formation. Gel electrophoresis confirmed that disulfide bonds served as the primary cross-links stabilizing the WPP structure. Furthermore, turbidity measurements showed that WPP exhibited superior colloidal phase stability compared with untreated WPI and maintained high colloidal stability under both acidic and neutral pH conditions.

Antisolvent precipitation↗

DOE OSTI2020

Proteomic Analysis of Exosomes for Discovery of Protein Biomarkers for Prostate and Bladder Cancer

Extracellular vesicles (EVs) are released by nearly all cell types as part of normal cell physiology, transporting biological cargo, including nucleic acids and proteins, across the cell membrane. In pathological states such as cancer, EV-derived cargo may mirror the altered state of the cell of origin. Exosomes are the smaller, 50–150 nanometer-sized EVs released from fusion of multivesicular endosomes with the plasma membrane. Exosomes play important roles in cell-cell communication and participate in multiple cancer processes, including invasion and metastasis. Therefore, proteomic analysis of exosomes is a promising approach to discover potential cancer biomarkers, even though it is still at an early stage. Herein, we critically review the advances in exosome isolation methods and their compatibility with mass spectrometry (MS)-based proteomic analysis, as well as studies of exosomes in pathogenesis and progression of prostate and bladder cancer, two common urologic cancers whose incidence rates continue to rise annually. As urological tumors, both urine and blood samples are feasible for noninvasive or minimally invasive analysis. A better understanding of the biological cargo and functions of exosomes via high-throughput proteomics will help provide new insights into complex alterations in cancer and provide potential therapeutic targets and personalized treatment for patients.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2021

Evaluation of Centralized Model-Based FLISR in a Lab Setup: Preprint

Utilities are installing advanced distribution management systems (ADMS) around the globe to improve the sensing and control of distribution systems. ADMS is becoming a critical component to improve the resiliency and reliability of distribution systems. These management systems host a multitude of applications that can be used to sense, control, and operate distribution systems. Fault location, isolation, and service restoration (FLISR) is one of the ADMS applications that is critical to improving resilience during fault conditions. FLISR applications use smart, controllable devices that are installed in the distribution system for FLISR operation. These controllable devices include distributed energy resources (DER) and reclosers. Evaluating such ADMS applications before installation in the field can help de-risk the field implementation and avoid costly failures in the field. This paper presents a background on experimental setup that are typically used to evaluate ADMS applications. This is followed by briefly presenting the setup used to evaluate the FLISR application in an off-the-shelf ADMS tool. Finally, results from the evaluation experiments are presented.

94 GMLC - Grid Modernization Laboratory Consortium↗

DOE OSTI2026

RH-TRU Waste Streams: HFDA Crucibles Create New Complex Waste Stream

This project focuses on the removal of the Hot Fuel Dissolution Apparatus (HFDA) crucibles from the Hot Fuel Examination Facility’s (HFEF) hot cells to create space for upcoming projects. The project team has created a crucible and pyro-salt non-debris waste stream that can be disposed of at Waste Isolation Pilot Plant (WIPP). Chemical Compatibility Examinations (CCEs) must be performed on candidate waste by reviewing the types of chemicals used in the experiments, information found in INL Process Knowledge Summary Reports (PKSRs), and Environmental Protection Agency guides on chemical compatibility. The CCEs identify which chemicals can be safely combined to ensure adverse reactions do not occur in the waste packages. The CCEs are then used to update the PKSR, Basis of Knowledge, and Acceptable Knowledge documents and demonstrate compliance with the WIPP Waste Acceptance Criteria. Once documents are finalized, they are reviewed and approved by the WIPP Central Characterization Project (CCP) to ensure proper waste stream characterization. After the documents are approved, the crucibles can be packaged and shipped to the Idaho Nuclear Technical and Engineering Center for storage awaiting certification. CCP will certify the waste using the approved documents and a series of confirmatory testing before being shipped and disposed in WIPP’s deep geological repository. Currently, the CCE is in progress and the PKSRs are being updated.

Basis of Knowledge↗

DOE OSTI2021

Chemical Understanding of Actinide Separations

This work provides a broad overview of the separation processes used to isolate actinides and the experimentally and computationally determined chemical characteristics that define those separations. The redox chemistry of the actinides plays a pivotal role in both aqueous and pyrochemical processing separations. The near-overlapping energies of the 6d and 5f orbitals in the light actinides allow for facile adjustment of actinide oxidation states, which is used in many established separation methods. In contrast, the stable, generally 3+ oxidation states of the mid- and heavy actinides can make it difficult to separate them from the similarly lanthanides(III). In aqueous separations, the tendency of the actinides to form anionic and neutral aqueous complexes with a variety of complexants (especially soft donors) is used to achieve high separation factors between chemically similar elements in both solid–liquid separations and liquid–liquid extraction. This selectivity can be further tuned through the use of specialized organic or solid-phase ligands. Pyroprocessing separations utilize the unique redox behavior of the actinides to adjust their distribution between a molten salt electrolyte and either a solid electrode or molten metal phase. Atomic-level insights into the mechanisms underlying actinide separation processes, with the ultimate goal of predicting separation behavior, can be provided by electronic structure and statistical mechanical-based calculation methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Chapter 13: Conversion of Terpenes to Chemicals and Related Products

Terpenes and terpenoids, hydrocarbons present in many types of biomass, havean extensive history of use as fuels, binders, polymers, pharmaceuticals and therapeutics, flavors, and fragrances. The structure of terpenes and terpenoids makes them amenable for use as a feedstock for catalytic conversion to other materials and also useful in their own right in the pharmaceutical, polymer, fuel, and chemical industries. There are many other plants and animals that produce terpenes that are present in extractable oils, most of which are used raw or as feedstocks for catalytic conversion to other materials in the fine chemical, flavor, and fragrance industry. This chapter discusses the sources, isolation and the catalytic methods for conversion of terpenes to fine chemicals and materials. Processes used to obtain turpentine are also discussed. The conversion of terpenes to resins, polymers, and other chemicals and materials is the focus of a wide variety of catalysis and materials research.

27 ARPA - Advanced Research Projects Agency-Energy↗

DOE OSTI2020

Radiative and Nonradiative Recombinations in Organic Radical Emitters: The Effect of Guest–Host Interactions

Radical-carrying organic molecules have received significant attention to bypass the issue related to harvesting triplet excitons in current light-emitting materials. While the computational efforts conducted so far have treated these radical emitters as isolated entities, in actual devices, they are embedded in a host matrix and subject to emitter–host interactions. In this study, by combining molecular dynamics simulations and density functional theory calculations, the impact of the host matrix on the optoelectronic performance of radical emitters is evaluated, taking as a representative example the (4-ncarbazolyl-2,6-dichlorophenyl)bis(2,4,6-trichlorophenyl)-methyl (TTM-3NCz) radical emitter dispersed in a 4,4-bis(carbazol-9-yl)biphenyl (CBP) host. A morphological analysis shows that steric effects around the radical centers, carried by the TTM electron-poor moieties of the emitters, disfavor π–π interactions with the host molecules, which leads to random intermolecular orientations around the TTM moieties. The 3NCz electron-rich moieties of the emitters, however, have much lesser spatial hindrance for intermolecular π–π stacking, which modulates the structural and electronic properties of the emitters in the host matrix. The influence of dynamic and static disorders on the radiative and nonradiative recombination processes is also investigated and it is found that the rates of nonradiative recombination are small, which opens the way to 100% internal quantum efficiency for the doublet-based emission process.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Challenges and Strategies to Advance High-Energy Nickel-Rich Layered Lithium Transition Metal Oxide Cathodes for Harsh Operation

Nickel-rich layered lithium transition metal oxides (LiNi 1–x–y Co x Mn y O 2 and LiNi 1–x–y Co x Al y O 2 , x + y ≤ 0.2) are the most attractive cathode materials for the next generation lithium-ion batteries for automotive application. However, they suffer from structural/interfacial instability during repeated charge/discharge, resulting in severe performance degradation and serious safety concerns. Here we provide a comprehensive review about challenges and strategies to advance nickel-rich layered cathodes specifically for harsh (high-voltage, high-temperature, and fast charging) operations. Firstly, the degradation pathways of nickel-rich cathodes including surface/interface degradation, undesired cathode–electrolytes parasitic reactions, gas evolution, inter/intragranular cracking, and electrical/ionic isolation are discussed. Then, recent achievements in stabilizing the structure/interface of nickel-rich cathodes via surface coating, cation/anion doping, composition tailoring, morphology engineering, and electrolytes optimization are summarized. Moreover, challenges and strategies to improve the performance of Ni-rich cathodes at the electrode level are discussed. Outlook and perspectives to promote the practical application of nickel-rich layered cathodes toward automotive application are provided as well.

25 ENERGY STORAGE↗

DOE OSTI2021

Employing the Dynamics of the Electrochemical Interface in Aqueous Zinc-Ion Battery Cathodes

Intrinsically stable materials are desirable for constructing energy storage devices, which aim to demonstrate durability under the harsh electrochemical conditions that are detrimental to their lifespan. However, in this study it is demonstrated that the intrinsic instability of an electrochemical interface can be converted from an obstacle into an advantage. In aqueous zinc-ion batteries, manganese oxide (MnO 2 ) exhibits considerable dissolution even in electrolyte containing Mn 2+ salt. Balancing with redeposition alleviates the harmful impact of dissolution on performance and alters the trajectory of the active phase. Inclusion of Mn 2+ salt in the electrolyte induces MnO 2 deposition on all conductive surfaces, requiring that distracting side reactions be eliminated to isolate the dynamics of the active phase. Under conditions favoring dissolution, capacity decreases dramatically and a highly crystalline tetragonal ZnMn 2 O 4 phase forms, while redeposition helps maintain capacity and promotes a disordered cubic Zn-rich phase. Ultimately, this work aims to illuminate a path forward to unlock the potential of batteries made with materials that are fundamentally unstable in their operating environment.

25 ENERGY STORAGE↗