Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrodynamics modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Newtonian mechanics of a many-particle assembly coupled to an external body potential

The Newtonian mechanics of a many-particle system evolving in time under the influence of an external body potential, that is, an external potential that couples to the center of mass only, is examined. The lack of any other external fields allows the complete separation of the center-of-mass (or external-field-dependent) equations from the internal (or external-field-independent) dynamics. The complete solution of the center-of-mass motion then allows an analytical evaluation of the external body potential contributions to the thermophysical properties of the system. The phenomena of field-induced heating, Taylor-Aris hydrodynamic form for the diffusion tensor, and an analogous hydrodynamic form for the viscosity tensor are derived from microscopic principles. A brief and model-dependent description of equilibrium phenomena is also presented.

Salvino, R. E.↗

The Unusual X-Ray Collision Morphology of NGC 4782/4783 (3C 278)

Deep ROSAT HRI (High-Resolution Imager) imaging of the X-ray-emitting gas associated with the colliding elliptical galaxy pair NGC 4782/4783 reveals for the first time the complexity of the hot gas distribution in a pair of close interacting galaxies. The HRI image of NGC 4782/4783 shows hot gas around each galaxy, a high surface brightness X-ray bridge connecting the galaxy pair, tidal-like tails emerging from the two galaxies, and a sheet of gas at the interaction interface between the two galaxies. The hot gas distributions do not peak at the optical centers of the galaxies but are displaced in the same sense as the tidal distensions seen in the optical luminosity distributions. All of these remarkable features show the complexity of structure that develops in the hot gas distribution when both hydrodynamical and tidal forces come into play during collisions between ellipticals with hot gas components. Models by Borne and Colina of the bent two-sided radio jet 3C 278 (associated with NGC 4782) indicated that there must be a strong interaction between the hot gas components of NGC 4782,/4783 and that the deflection of the radio jets is likely caused by the ram pressure exerted on the jet plasma by the hot gas associated with the passing companion NGC 4783. These conclusions are qualitatively confirmed by the HRI image and substantiate the major role played by the hot interstellar medium, and its asymmetries, in the propagation and entrainment of radio jets in colliding radio host ellipticals.

Colina, Luis↗

Modeling of Vapor Bubble Growth Under Nucleate Boiling Conditions in Reduced Gravity

A dynamic model is developed to describe the evolution of a vapor bubble growing at a nucleation site on a superheated surface under arbitrary gravity. The bubble is separated from the surface by a thin microlayer and grows due to the evaporation from the microlayer interface. The average thickness of the microlayer increases as the bubble expands along the surface if the evaporation rate is lower than some critical value. The corresponding threshold value of the surface temperature has to be associated with the burn-out crisis. Two main reasons make for bubble separation, which are the buoyancy force and a force caused by the vapor momentum that comes to the bubble with vapor molecules. The latter force is somewhat diminished if condensation takes place at the upper bubble surface in subcooled liquids. The action of the said forces is opposed by inertia of the additional mass of liquid as the bubble center rises above the surface and by inertia of liquid being expelled by the growing bubble in radial directions. An extra pressure force arises due to the liquid inflow into the microlayer with a finite velocity. The last force helps in holding the bubble close to the surface during an initial stage of bubble evolution. Two limiting regimes with distinctly different properties can be singled out, depending on which of the forces that favor bubble detachment dominates. Under conditions of moderately reduced gravity, the situation is much the same as in normal gravity, although the bubble detachment volume increases as gravity diminishes. In microgravity, the buoyancy force is negligible. Then the bubble is capable of staying near the surface for a long time, with intensive evaporation from the microlayer. It suggests a drastic change in the physical mechanism of heat removal as gravity falls below a certain sufficiently low level. Inferences of the model and conclusions pertaining to effects caused on heat transfer processes by changes in bubble hydrodynamics induced by gravity are discussed in connection with experimental evidence, both available in current and in as yet unpublished literature.

Buyevich, Yu A.↗

The Interaction of Hot and Cold Gas in the Disk and Halo of Galaxies

Most of the thermal energy in the Galaxy and perhaps most of the baryons in the Universe are found in hot (log T approximately 5.5 - 7) gas. Hot gas is detected in the local interstellar medium, in supernova remnants (SNR), the Galactic halo, galaxy clusters and the intergalactic medium (IGM). In our own Galaxy, hot gas exists in large superbubbles up to several hundred pc in diameter that locally dominate the interstellar medium (ISM) and determine its thermal and dynamic evolution. While X-ray observations using ROSAT, Chandra and XMM have allowed us to make dramatic progress in mapping out the morphology of the hot gas and in understanding some of its spectral characteristics, there remain fundamental questions that are unanswered. Chief among these questions is the way that hot gas interacts with cooler phase gas and the effects these interactions have on hot gas energetics. The theoretical investigations we proposed in this grant aim to explore these interactions and to develop observational diagnostics that will allow us to gain much improved information on the evolution of hot gas in the disk and halo of galaxies. The first of the series of investigations that we proposed was a thorough exploration of turbulent mixing layers and cloud evaporation. We proposed to employ a multi-dimensional hydrodynamical code that includes non-equilibrium ionization (NEI), radiative cooling and thermal conduction. These models are to be applied to high velocity clouds in our galactic halo that are seen to have O VI by FUSE (Sembach et ai. 2000) and other clouds for which sufficient constraining observations exist.

Slavin, Jonathan↗

Journal Bearing Analysis Suite Released for Planetary Gear System Evaluation

Planetary gear systems are an efficient means of achieving high reduction ratios with minimum space and weight. They are used in helicopter, aerospace, automobile, and many industrial applications. High-speed planetary gear systems will have significant dynamic loading and high heat generation. Hence, they need jet lubrication and associated cooling systems. For units operating in critical applications that necessitate high reliability and long life, that have very large torque loading, and that have downtime costs that are significantly greater than the initial cost, hydrodynamic journal bearings are a must. Computational and analytical tools are needed for sufficiently accurate modeling to facilitate optimal design of these systems. Sufficient physics is needed in the model to facilitate parametric studies of design conditions that enable optimal designs. The first transient journal bearing code to implement the Jacobsson-Floberg-Olsson boundary conditions, using a mass-conserving algorithm devised by Professor Emeritus Harold Elrod of Columbia University, was written by David E. Brewe of the U.S. Army at the NASA Lewis Research Center1 in 1983. Since then, new features and improved modifications have been built into the code by several contributors supported through Army and NASA funding via cooperative agreements with the University of Toledo (Professor Ted Keith, Jr., and Dr. Desikakary Vijayaraghavan) and National Research Council Programs (Dr. Vijayaraghavan). All this was conducted with the close consultation of Professor Elrod and the project management of David Brewe.

Brewe, David E.↗

How Very Massive Metal-Free Stars Start Cosmological Reionization

The initial conditions and relevant physics for the formation of the earliest galaxies are well specified in the concordance cosmology. Using ab initio cosmological Eulerian adaptive mesh refinement radiation hydrodynamical calculations, we discuss how very massive stars start the process of cosmological reionization. The models include nonequilibrium primordial gas chemistry and cooling processes and accurate radiation transport in the case B approximation using adaptively ray-traced photon packages, retaining the time derivative in the transport equation. Supernova feedback is modeled by thermal explosions triggered at parsec scales. All calculations resolve the local Jeans length by at least 16 grid cells at all times and as such cover a spatial dynamic range of approx.10(exp 6). These first sources of reionization are highly intermittent and anisotropic and first photoionize the small-scale voids surrounding the halos they form in, rather than the dense filaments they are embedded in. As the merging objects form larger, dwarf-sized galaxies, the escape fraction of UV radiation decreases and the H II regions only break out on some sides of the galaxies, making them even more anisotropic. In three cases, SN blast waves induce star formation in overdense regions that were formed earlier from ionization front instabilities. These stars form tens of parsecs away from the center of their parent DM halo. Approximately five ionizing photons are needed per sustained ionization when star formation in 10(exp 6) stellar Mass halos is dominant in the calculation. As the halos become larger than approx.10(exp 7) Stellar Mass, the ionizing photon escape fraction decreases, which in turn increases the number of photons per ionization to 15-50, in calculations with stellar feedback only. Radiative feedback decreases clumping factors by 25% when compared to simulations without star formation and increases the average temperature of ionized gas to values between 3000 and 10,000 K.

Wise, John H.↗

Observation Impact and Information Retention in the Lower Troposphere of the GMAO GEOS Data Assimilation System

In this study, we have assessed the effectiveness of the use of existing observing systems in the lower troposphere in the GEOS hybrid–4DEnVar data assimilation system through a set of observing system experiments. The results show that microwave radiances have a large impact in the Southern Hemisphere and Tropical ocean, but the large influence is mostly observed above 925 hPa and dissipates relatively quickly with longer forecast lead times. Conventional data information holds better in the forecast ranging from the surface to 100 hPa, depending on the field evaluated, in the Northern Hemisphere and lowest model levels in the Tropics. Infrared radiances collectively have much less impact in the lower troposphere. Removing surface observations has small but persistent impact on specific humidity in the upper atmosphere, but small or negligible impact on planetary boundary layer (PBL) height and temperature. The model responses to the incremental analysis update (IAU) forcing are also analyzed. In the IAU assimilation window, the physics responds strongly to the IAU forcing in the lower troposphere, and the changes of physics tendency in the lower troposphere and hydrodynamics tendency in the mid- and upper troposphere are viewed as beneficial to the reduction of state error covariance. In the subsequent forecast, the model tendencies continue to deviate further from the original free forecast with forecast lead times around 300–400 hPa, but physics tendency has showed signs of returning to its original free forecast mechanisms at 1-day forecast in the lower troposphere.

GEOS↗

A Space-Time Fluid (Unabridged)

Purpose: This essay is a retelling of general relativity in a language in which space-time geometry is expressed as a fluid. This trivial and useful reformulation gives 1) a non-perturbative covariant description of cosmological inhomogeneities and 2) a simple formula describing how cosmic inhomogeneities are generated on super-horizon scales. Methods: Equating the Ricci curvature with the associated matter stress-energy gives a description of space-time geometry in terms of fluid properties. These locally measurable (covariant) non-perturbative quantities are in some ways superior to commonly used "gauge invariant" quantities. The dynamics of a quantity (kurvature) which describes cosmological inhomogeneities is described in detail. A detailed comparison is made of space-time fluid dynamics with that of a classical (Newtonian physics) fluid. Results: The fluid lexicon permits an unambiguous definition of the velocity of space-time. The evolution of the space-time fluid is in many ways identical with that of the classical fluid when expressed in Lagrangian coordinates. Kurvature is a measure of the specific binding energy of the fluid and is a most useful covariant measure of cosmological inhomogeneities. For plausible matter models kurvature will increase, even on super-horizon scales, due to non-linear hydrodynamic effects rather than gravity. This phenomena is also exhibited by classical fluids. Conclusion: The space-time fluid representation of geometrodynamics gives a simple and useful description of the evolution of cosmological inhomogeneities.

Stebbins, Albert [Fermilab] (ORCID:000000023807725↗

Performance estimation of resonance-enhanced dual-buoy wave energy converter using coupled time-domain simulation

This article presents the modeling methodology and performance evaluation of the resonance-enhanced dual-buoy WEC (Wave Energy Converter) by HEM (hydrodynamic & electro-magnetic) fully-coupled-dynamics time-domain-simulation program. The numerical results are systematically compared with the authors’ 1/6-scale experiment. With a direct-drive linear generator, the WEC consists of dual floating cylinders and a moon-pool between the cylinders, which can utilize three resonance phenomena from moon-pool dynamics as well as heave motions of inner and outer buoys. The contact and friction between the two buoys observed in the experiment are also properly modeled in the time-domain simulation by the Coulomb-friction model. Moon-pool resonance peaks significantly exaggerated in linear potential theory are empirically adjusted through comparisons with measured values. A systematic comparative study between the simulations and experiments with and without PTO (power-take-off) is conducted, and the relative heave displacements/velocities and power outputs are well matched. Then, parametric studies are carried out with the simulation program to determine optimum generator parameters. The performance with various wave conditions is also assessed.

16 TIDAL AND WAVE POWER↗

Late-time post-merger modeling of a compact binary: effects of relativity, r-process heating, and treatment of transport

Detectable electromagnetic counterparts to gravitational waves from compact binary mergers can be produced by outflows from the black hole-accretion disk remnant during the first 10 s after the merger. Two-dimensional axisymmetric simulations with effective viscosity remain an efficient and informative way to model this late-time post-merger evolution. In addition to the inherent approximations of axisymmetry and modeling turbulent angular momentum transport by a viscosity, previous simulations often make other simplifications related to the treatment of the equation of state and turbulent transport effects. In this paper, we test the effect of these modeling choices. By evolving with the same viscosity the exact post-merger initial configuration previously evolved in Newtonian viscous hydrodynamics, we find that the Newtonian treatment provides a good estimate of the disk ejecta mass but underestimates the outflow velocity. We find that the inclusion of heavy nuclei causes a notable increase in ejecta mass. An approximate inclusion of r-process effects has a comparatively smaller effect, except for its designed effect on the composition. Diffusion of composition and entropy, modeling turbulent transport effects, has the overall effect of reducing ejecta mass and giving it a speed with lower average and more tightly-peaked distribution. Also, we find significant acceleration of outflow even at distances beyond 10 000 km, so that thermal wind velocities only asymptote beyond this radius and at higher values than often reported.

79 ASTRONOMY AND ASTROPHYSICS↗

On Two-Phase Pressure and Temperature Equilibration with Mie-Grüneisen Equations of State

In the course of reactive flow modeling, the phases of high explosive (HE) reactants and products introduce additional degrees of freedom to the underlying hydrodynamic equations of compressible reactive fluid mechanics. Hydrodynamic simulations track the bulk (mixture) conservation properties of mass, momentum and energy. When multiple phases are introduced, one must decide on appropriate closure rules to determine the relative phase volumes and energy distribution between the phases. One typical closure is to assume that the phases are in pressure and temperature equilibrium. Here, the requisite equations of p-T equilibration are explored for Mie-Grüneisen Equations of State (EOS). Examples with Davis reactants and Davis products EOSs will be given. The Davis forms are used in both the WSD and AWSD reactive flow models.

42 ENGINEERING↗

Hydrodynamic conditions in laser irradiated buried layer experiments

The calculation of open shell ionization level and radiative properties of materials in Non-Local Thermal Equilibrium (NLTE) is currently still a major challenge for any atomic model. The predictions of various NLTE atomic codes at these conditions still differ significantly. In recent years, a new buried layer platform was developed at the Lawrence Livermore National Laboratory and the Laboratory for Laser Energetics. This platform is used to measure ionization distribution and emission of open L-shell, mid-Z ions and open M-shell, high-Z ions at NLTE conditions that are relevant in many laser plasma applications. These experiments offer a unique chance for benchmarking the atomic models. In order to perform these experiments, a uniform well characterized plasma source is required. In this work, we present one-dimensional (1D) and two-dimensional simulations of the experimental platform. These simulations were used for both the design and the analysis of the experiments. The simulations demonstrate the different phases of hydrodynamic evolution of the target and identify the time windows in which uniform conditions can be achieved. A 1D expansion of the target was found to be adequate to describe the target's evolution for most of the experiment duration. The fast 1D simulations were compared with recent experimental results from the Omega laser facility. The sensitivity of the results to several modeling parameters such as the electron flux limiter and laser resonant absorption is reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulent Concentration of mm-Size Particles in the Protoplanetary Nebula: Scale-Dependent Cascades

The initial accretion of primitive bodies (here, asteroids in particular) from freely-floating nebula particles remains problematic. Traditional growth-by-sticking models encounter a formidable "meter-size barrier" (or even a mm-to-cm-size barrier) in turbulent nebulae, making the preconditions for so-called "streaming instabilities" difficult to achieve even for so-called "lucky" particles. Even if growth by sticking could somehow breach the meter size barrier, turbulent nebulae present further obstacles through the 1-10km size range. On the other hand, nonturbulent nebulae form large asteroids too quickly to explain long spreads in formation times, or the dearth of melted asteroids. Theoretical understanding of nebula turbulence is itself in flux; recent models of MRI (magnetically-driven) turbulence favor low-or- no-turbulence environments, but purely hydrodynamic turbulence is making a comeback, with two recently discovered mechanisms generating robust turbulence which do not rely on magnetic fields at all. An important clue regarding planetesimal formation is an apparent 100km diameter peak in the pre-depletion, pre-erosion mass distribution of asteroids; scenarios leading directly from independent nebula particulates to large objects of this size, which avoid the problematic m-km size range, could be called "leapfrog" scenarios. The leapfrog scenario we have studied in detail involves formation of dense clumps of aerodynamically selected, typically mm-size particles in turbulence, which can under certain conditions shrink inexorably on 100-1000 orbit timescales and form 10-100km diameter sandpile planetesimals. There is evidence that at least the ordinary chondrite parent bodies were initially composed entirely of a homogeneous mix of such particles. Thus, while they are arcane, turbulent concentration models acting directly on chondrule size particles are worthy of deeper study. The typical sizes of planetesimals and the rate of their formation can be estimated using a statistical model with properties inferred from large numerical simulations of turbulence. Nebula turbulence is described by its Reynolds number Re = (L/eta)(exp 4/3), where L = H alpha(exp 1/2) is the largest eddy scale, H is the nebula gas vertical scale height, alpha the turbulent viscosity parameter, and eta is the Kolmogorov or smallest scale in turbulence (typically about 1km), with eddy turnover time t(sub eta). In the nebula, Re is far larger than any numerical simulation can handle, so some physical arguments are needed to extend the results of numerical simulations to nebula conditions. In this paper, we report new physics to be incorporated into our statistical models.

mm-size particles↗

SPH modelling of energy partitioning during impacts on Venus

Impact cratering of the Venusian planetary surface by meteorites was investigated numerically using the Smoothed Particle Hydrodynamics (SPH) method. Venus presently has a dense atmosphere. Vigorous transfer of energy between impacting meteorites, the planetary surface, and the atmosphere is expected during impact events. The investigation concentrated on the effects of the atmosphere on energy partitioning and the flow of ejecta and gas. The SPH method is particularly suitable for studying complex motion, especially because of its ability to be extended to three dimensions. In our simulations, particles representing impactors and targets are initially set to a uniform density, and those of atmosphere are set to be in hydrostatic equilibrium. Target, impactor, and atmosphere are represented by 9800, 80, and 4200 particles, respectively. A Tillotson equation of state for granite is assumed for the target and impactor, and an ideal gas with constant specific heat ratio is used for the atmosphere. Two dimensional axisymmetric geometry was assumed and normal impacts of 10km diameter projectiles with velocities of 5, 10, 20, and 40 km/s, both with and without an atmosphere present were modeled.

Takata, T.↗

A Parameterized Neutrino Emission Model to Study Mass Ejection in Failed Core-collapse Supernovae

Some massive stars end their lives as failed core-collapse supernovae (CCSNe) and become black holes (BHs). Although in this class of phenomena the stalled supernova (SN) shock is not revived, the outer stellar envelope can still be partially ejected. This occurs because the hydrodynamic equilibrium of the star is disrupted by the gravitational mass loss of the protoneutron star (PNS) due to neutrino emission. We develop a simple parameterized model that emulates PNS evolution and its neutrino emission and use it to simulate failed CCSNe in spherical symmetry for a wide range of progenitor stars. Our model allows us to study mass ejection of failed CCSNe where the PNS collapses into a BH within ~100 ms and up to ~10 6 s. We perform failed CCSNe simulations for 262 different pre-SN progenitors and determine how the energy and mass of the ejecta depend on progenitor properties and the equation of state (EOS) of dense matter. In the case of a future failed CCSN observation, the trends obtained in our simulations can be used to place constraints on the pre-SN progenitor characteristics, the EOS, and on PNS properties at BH formation time.

79 ASTRONOMY AND ASTROPHYSICS↗

Sucrose transport inside the phloem: Bridging hydrodynamics and geometric characteristics

In plants, the delivery of the products of photosynthesis is achieved through a hydraulic system labeled as phloem. This semi-permeable plant tissue consists of living cells that contract and expand in response to fluid pressure and flow velocity fluctuations. The Münch pressure flow theory, which is based on osmosis providing the necessary pressure gradient to drive the mass flow of carbohydrates, is currently the most accepted model for such sucrose transport. When this hypothesis is combined with the conservation of fluid mass and momentum as well as sucrose mass, many simplifications must be invoked to mathematically close the problem and to resolve the flow. Here this study revisits such osmotically driven flows by developing a new two-dimensional numerical model in cylindrical coordinates for an elastic membrane and a concentration-dependent viscosity. It is demonstrated that the interaction between the hydrodynamic and externally supplied geometrical characteristic of the phloem has a significant effect on the front speed of sucrose transport. These results offer a novel perspective about the evolutionary adaptation of plant hydraulic traits to optimize phloem soluble compounds transport efficiency.

59 BASIC BIOLOGICAL SCIENCES↗

Local stress within a granular molecular solvent matrix, a mechanism for individual ion hydration

The activity of water is important in many natural systems and directed processes. To better understand water activity, the hydration of individual ions is approximated for a recently developed speciation-based solution model. Here a matrix of values for hydration of complete salts (anion and cation) was used as source data to calculate individual ion hydration values. Some electrolytes were excluded from calculations of individual ion hydration due to the prevalence of ion pairing and resulting liberation of water upon ion pairing. Evaluation of the periodic trends emerging from individual ion hydration values suggests that ionic volume, relative to the volume of molecular water, dictates both modeled hydration requirements (related to vapor-liquid-equilibrium-derived activity) as well as properties historically described by hydrodynamic radius (ion diffusion and solution viscosity). When water is conceptualized as a granular three-dimensional matrix, solutes may function as substitutional defects (dilation or constriction) inducing local compressive or tensile stress. These results have implications on the mechanism of the Hofmeister series and series reversals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The overshoot region at the bottom of the solar convection zone

The extent and thermal stratification of the region of convective overshoot underneath the convection zone of the sun are investigated. The phenomenon of convective overshoot in general is discussed, and some of the modal and model approaches to studying it are briefly reviewed. A detailed theoretical description of the motion of plumes in a stably stratified medium is given, leading to a 'derivation' of the plume equations from the hydrodynamic equations. Entrainment is discussed, and it is shown how the plume equations can be used to compute convective overshoot in the sun. The limitations of the plume model are addressed, arguing that a thin boundary layer must exist which separates convective and radiative regions. The results of numerical integrations of the plume equations, as applied to the region of convective overshoot underneath the solar convective zone, are discussed.

Schmitt, J. H. M. M.↗