Results for “function” — Page 89

NASA NTRS2018

DGEN Aeropropulsion Research Turbofan (DART) Core/Combustor-Noise Infinite-Tube-Probe (ITP) Transfer Function

Direct measurements of turbofan engine core unsteady pressure is complicated by the extreme thermal environment within the engine, preventing currently available transducers from operating. It is necessary to use a remote measurement configuration such as an infinite-tube-probe (ITP) configuration in which the transducer is teed into a line pneumatically coupled with the location of interest and the other end of the ITP contains an "infinite" waveguide designed to prevent any reflections. This configuration has become a standard method for experiments concerning core noise. In order to relate the spectral pressure measurements obtained remotely with the ITP, a transfer (frequency response) function needs to be calculated based on a known pressure field. This is accomplished using a normal impedance tube at Glenn Research Center, where a flush-mounted microphone is used as a reference to the ITP signal in the calculation of the ITP's transfer function.

Boyle, Devin K.↗

NASA NTRS2019

Casper-1, Part 6: Uncertainty Quantification, Factor Effects, and Outlier Analysis for an On-Board Airplane Trajectory Prediction Function

This report presents data analysis results for a simulation-based approach named CASPEr (Characterization of Airplane State Prediction Error) to characterize the performance of onboard energy state and automation mode prediction functions for terminal area arrival and approach phases of flight over a wide range of conditions. In particular, the results include quantification of energy state (i.e., altitude and airspeed) prediction performance, models for prediction performance as a function of initial energy state (i.e., initial altitude, airspeed, and weight) and weather factors, and analysis of outlier prediction performance. Wind speed, wind direction, and wind gradient were found to be major factors in energy state prediction performance. Initial energy and gust intensity were also significant factors in airspeed prediction performance. Furthermore, the results suggest that errors in automation mode prediction may be a major contributor to outlier prediction performance.

Torres-Pomales, Wilfredo↗

NASA NTRS2019

Multimodel Analysis of Future Land Use and Climate Change Impacts on Ecosystem Functioning

Land use and climate changes both affect terrestrial ecosystems. Here, we used three combinations of Shared Socioeconomic Pathways and Representative Concentration Pathways (SSP1xRCP26, SSP3xRCP60, and SSP5xRCP85) as input to three dynamic global vegetation models to assess the impacts and associated uncertainty on several ecosystem functions: terrestrial carbon storage and fluxes, evapotranspiration, surface albedo, and runoff. We also performed sensitivity simulations in which we kept either land use or climate (including atmospheric CO2) constant from year 2015 on to calculate the isolated land use versus climate effects. By the 2080–2099 period, carbon storage increases by up to 87 ± 47 Gt (SSP1xRCP26) compared to present day, with large spatial variance across scenarios and models. Most of the carbon uptake is attributed to drivers beyond future land use and climate change, particularly the lagged effects of historic environmental changes. Future climate change typically increases carbon stocks in vegetation but not soils, while future land use change causes carbon losses, even for net agricultural abandonment (SSP1xRCP26). Evapotranspiration changes are highly variable across scenarios, and models do not agree on the magnitude or even sign of change of the individual effects. A calculated decrease in January and July surface albedo (up to −0.021 ± 0.007 and −0.004 ± 0.004 for SSP5xRCP85) and increase in runoff (+67 ± 6 mm/year) is largely driven by climate change. Overall, our results show that future land use and climate change will both have substantial impacts on ecosystem functioning. However, future changes can often not be fully explained by these two drivers and legacy effects have to be considered.

Krause, A.↗

NASA NTRS2019

Plasma Surface Functionalization of AFP Manufactured Composites for Improved Adhesive Bond Performance

Application of carbon fiber reinforced polymer (CFRP) as a high-performance structural material has widespread application in the present aerospace industry. However, as-processed composite materials require a comprehensive surface treatment prior to bonding to remove contaminants and impart surface functionality and topography to overcome their poor adhesion properties. Atmospheric pressure plasma jet treatment (APPJT) has been increasingly garnering attention as an alternate method for surface preparation of CFRP. This method has been reported to achieve success in imparting favorable polar functional groups into the composite surfaces enhancing wettability and surface energy of the bonded surfaces. In some cases, APPJT has been demonstrated to remove contaminants or, in the case of silicones, convert them to silica. In this study, an atmospheric pressure plasma jet (APPJ) system was used for surface activation of a composite laid-up by an automated fiber placement (AFP) machine. Surface modifications prior to and after treatment were characterized using water contact angle (WCA) measurements, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Double cantilever beam (DCB) tests were performed to quantify the bonding performance of the composites. The results show a marked enhancement of the mode I interlaminar fracture toughness with the application of APPJT.

Sarikaya, Ibrahim↗

NASA NTRS2019

Generation of a Reduced-Order Model of an Unmanned Combat Air Vehicle Using Indicial Response Functions

Within the NATO STO AVT-251 Task Group, a generic Unmanned Combat Air Vehicle (UCAV) planform was redesigned based on requirements derived from parts of the flight envelope of the defined mission. Because of the lambda-shape planform and associated flow phenomena including shocks and vortices, the aerodynamic design process relies heavily on high-fidelity predictions from computational fluid dynamics (CFD). These simulations enable accurate flight dynamics predictions, allowing for the identification of any potential performance issues early in the design process. Potentially, a complete flight dynamics model can be derived from CFD calculations provided that the underlying reduced order model (ROM) captures the underlying physics contained within the CFD results. This work investigates the creation of a nonlinear ROM using indicial response functions. The response functions are obtained using a grid motion approach that separates the effects of angle of attack and pitch rate. This approach is demonstrated using three different CFD codes from various organizations: ENSOLV at Royal Netherlands Aerospace Centre, USM3D at NASA Langley Research Center, and Kestrel at the United States Air Force Academy. ROM predictions were generated for a manoeuver resembling a low-speed pull-up. The predictions are found to be sensitive to the quality of the steady-state solutions from which step-response calculations were started, as well as the convergence of the step responses themselves. Nevertheless, the indicial response method is shown to provide aerodynamic predictions with acceptable accuracy including transient effects, and as such is a promising method for computationally efficient flight dynamics predictions.

Michel P.C. van Rooij↗

NASA NTRSDate not supplied

Modification of Oxygen Regulator Functionality Tester for X-59 Regulator Testing

NASA Armstrong Flight Research Center currently has possession of an oxygen regulator functionality tester. This device was used for ensuring that the oxygen regulators for aircraft life support systems are functional and safe for flight and/or other testing. This tester has been in storage for about 25 years, with occasional adjustment to sensors and instruments. Due to the aging structure, there are components and instruments that may be broken, unstable, worn-out, and thus inhibits safe and accurate future testing on other oxygen regulators. This tester is also limited in the types of regulators it may test, limited to ones that only have one line to deliver oxygen in and out of the regulator, to the pilots mask. It has been requested for this tester to be modified to test the X-59 oxygen regulator.

Mirin Morris-ward↗

NASA NTRS2020

Recommended Crew Systems Capabilities for a Mars Ascent Vehicle as a Function of Flight Duration

In many human Mars exploration architectures, a Mars Ascent Vehicle (MAV) is used at the end of a surface stay to transport crew from the Martian surface to a waiting in-space transportation vehicle. It is possible for this transportation vehicle to be placed in any of several different Mars orbits, the selection of which drives the flight duration of the MAV from launch to docking and the amount of propellant required on the transportation vehicle to reach the same orbit. This paper identifies existing NASA standards and supplies habitability subject matter expert recommendations for the human habitation capabilities of the MAV as a function of flight duration. Living and working functions that may potentially be carried aboard a MAV are assessed. Flight durations considered include up to 8 hours, 8-24 hours, 1-2 days, 2-3 days, 3-4 days, and 4-7 days, which book end flight durations necessary to reach the transportation vehicle at different possible Mars orbits. This analysis will determine if there are key durations that serve as significant break points in required MAV capability.

MAV↗

NASA NTRSDate not supplied

How the Allocation of Lander Functions Impacts Human Lunar Exploration Architecture Propellant Demands

As NASA looks to the moon as a proving ground for the technologies required to conduct the first human exploration campaign of Mars, this study assesses the potential propellant demands that a sustained human lunar presence would require. In particular, this study evaluates how the allocation and distribution of vehicle functions to a different number of vehicles can impact the propellant required to conduct a human lunar exploration mission. Four different transportation architectures for human lunar exploration and three different refueling assumptions were defined. The impact on the propellant required for a mission was assessed for all architectures and refueling assumptions for ranges of crew payload mass, vehicle inert mass fraction, and a sensitivity to the mission maneuver velocity magnitudes. The results of this analysis show that aggregating vehicle functions to a single-stage lander vehicle can have a positive impact on the architecture's level of vehicle reusability and that an increase in the number of refueling opportunities reduces the mass of the vehicles and of the propellant required per mission.

Matteo A. Clark↗

NASA NTRS1996

Ku-Band Ocean Backscatter Functions for Surface Wind Retrieval

The accuracy of wind measurements with scatterometer techniques depends on the particular geophysical model function used in the retrieval algorithm. The measured results are compared with calculated values to assess the existing geophysical model functions for applications to ocean surface wind retrieval.

wind↗

NASA NTRSDate not supplied

An Approach for Defining IASMS Services, Functions, and Capabilities

Assuring safety in the NAS with the inclusion of new entrants, such as Advanced Air Mobility (AAM), will require overcoming unique safety challenges that result from combining innovative technologies with novel airspace concepts for moving people and cargo using autonomous vehicles. The focus of the In-time Aviation Safety Management System (IASMS) is to overcome AAM’s safety assurance challenges. The IASMS Concept of Operations (ConOps) describes an interconnected set of services, functions, and capabilities (SFCs) designed to manage operational risks, identify unknown risks, and inform system designs. This paper describes an approach for defining SFCs based on technology trends in research, assessment of known and unknown risks in voluntary safety reports, and causal and contributing factors in aviation accidents and incidents. This approach would identify potential SFCs that further expand the Monitor, Assess, and Mitigate (M-A-M) functionality that represents the enabling framework of the IASMS. Safety implications that will result from integration of AAM in the transformation of the National Airspace System (NAS) were addressed in National Academies committees reports on AAM and IASMS. Development of a ConOps for IASMS was a top recommendation and can be represented as a reframing of safety assurance that builds on real-time alerting such as the Traffic Alert and Collision Avoidance System, and adds the more encompassing in-time temporal parameter in recognition of the different timelines for collecting and assessing safety data for risk mitigations. For example, mining for safety trends from data sources such as the Aviation Safety Information Analysis and Sharing system occurs over a longer time period. Research on AAM operations poses that SFCs can be designed to monitor the safety margin appropriate for AAM including with regards to the distance between current flight parameters and nominal ideal conditions. These in-time comparisons will become more complex as the density of operations increases at least in certain areas and can include planned and actual 4D trajectory, and in-time comparisons having implications on conflict modeling and prediction including expected and actual departure time, fix/waypoint crossing times, and arrival time. These comparisons would be integrated as part of SFCs that redefine and inform new safety margin. An increased safety margin improves management of operational risks while reducing the potential for anomalies. An increased safety margin also has implications for operator confidence in the certainty of its operations and trust in automation. Technology trends in research could be used to refine existing SFCs and define needs for additional SFCs that provide safety improvements to the design and operation of vehicles, airspace design, and operator performance requirements. NASA is developing innovative approaches to safeguard against major accidents and incidents that have occurred in the NAS and those anticipated with the inclusion of envisioned AAM operations. The innovations use operational performance data to monitor, detect, and predict flight variations exceeding safe nominal patterns, such as would be caused by navigational error, severe weather complications, or hijacking of UAS controls. These innovative approaches have high potential to prevent accidents and incidents in the new AAM era. It is anticipated that elements of the innovations will evolve into SFCs for the IASMS. Voluntary safety reports can be monitored to identify anomalies related to design or operational performance risks. Reports could be periodically monitored and assessed for specific topics. Reports might serve as weak signals or precursors indicative of emergent risk such as when combined with other safety information. The architecture could include SFCs that are based on voluntary safety reports recognizing the periodic temporal nature of data analysis. As previously mentioned, aviation accidents with their causal and contributing precursors can inform the need for SFCs in the IASMS. Accidents and incidents at San Francisco International Airport such as Asiana 214 and Air Canada 759 illustrate how combinations of different factors lead to increased risk. These types of precursors and different factors have implications on the types of SFCs that could be needed to monitor and manage different sources and types of design and operational risk. Continuing to assure the safety of AAM as designs and operations gain in complexity can be accompanied by defining SFCs that also increase in complexity. These SFCs can leverage information from findings and recommendations synthesized across on-going research, voluntary safety reports, and accident and incident reports. These SFCs can serve to refine accuracy of algorithms and resolve limitations with current practices. The IASMS architecture represents the framework for the SFCs and their critical role in safety assurance.

In-Time Aviation Safety Management System↗

NASA NTRS2019

Multimodel Analysis of Future Land Use and Climate Change Impacts on Ecosystem Functioning

Land use and climate changes both affect terrestrial ecosystems. Here, we used three combinations of Shared Socioeconomic Pathways and Representative Concentration Pathways (SSP1xRCP26, SSP3xRCP60, and SSP5xRCP85) as input to three dynamic global vegetation models to assess the impacts and associated uncertainty on several ecosystem functions: terrestrial carbon storage and fluxes, evapotranspiration, surface albedo, and runoff. We also performed sensitivity simulations in which we kept either land use or climate (including atmospheric CO2) constant from year 2015 on to calculate the isolated land use versus climate effects. By the 2080–2099 period, carbon storage increases by up to 87 ± 47 Gt (SSP1xRCP26) compared to present day, with large spatial variance across scenarios and models. Most of the carbon uptake is attributed to drivers beyond future land use and climate change, particularly the lagged effects of historic environmental changes. Future climate change typically increases carbon stocks in vegetation but not soils, while future land use change causes carbon losses, even for net agricultural abandonment (SSP1xRCP26). Evapotranspiration changes are highly variable across scenarios, and models do not agree on the magnitude or even sign of change of the individual effects. A calculated decrease in January and July surface albedo (up to −0.021 ± 0.007 and −0.004 ± 0.004 for SSP5xRCP85) and increase in runoff (+67 ± 6 mm/year) is largely driven by climate change. Overall, our results show that future land use and climate change will both have substantial impacts on ecosystem functioning. However, future changes can often not be fully explained by these two drivers and legacy effects have to be considered.

land use change↗

NASA NTRS2020

A Large, Deep 3 Deg2 Survey of Hα, [OIII], and [OII] Emitters from LAGER: Constraining Luminosity Functions

We present our measurements of the Hα, [OIII], and [O II] luminosity functions as part of the Lyman Alpha Galaxies at Epoch of Reionization (LAGER) survey using our samples of 1577 z=0.47Hα-, 3933 z=0.93 [O III]-, and 5367 z=1.59 [O II]-selected emission line galaxies in a 3 deg2 single, CTIO/Blanco DECam pointing of the COSMOS field. Our observations reach 5σ depths of 8.2 × 10−18 erg s−1 cm−2 and comoving volumes of (1−7) × 105 Mpc3 making our survey one of the deepest narrow-band surveys. We select our emission line galaxies via spectroscopic confirmation, photometric redshifts, and colour–colour selections. We measure the observed luminosity functions for each sample and find best fits of φ* = 10−3.16+0.09 −0.09 Mpc−3and L* = 1041.72+0.09 −0.09 erg s−1 for Hα, φ* = 10−2.16+0.10−0.12 Mpc−3 and L* = 1041.38+0.07 −0.06 erg s−1 for [O III], and φ* = 10−1.97+0.07−0.07 Mpc−3 and L* = 1041.66+0.03−0.03 erg s−1 for [OII], with α fixed to −1.75, −1.6, and −1.3, respectively. An excess of bright >1042 erg s−1 [O III] emitters is observed and may be due to active galactic nucleus (AGN) contamination. Corrections for dust attenuation are applied assuming AHα = 1 mag. We also design our own empirical restframe g − r calibration using SDSS DR12 data, test it against our z = 0.47 Hα emitters with zCOSMOS 1D spectra, and calibrate it for (g − r) between −0.8 and 1.3 mag. Dust and AGN corrected star formation rate densities (SFRDs) are measured as log10ρSFR/(Msun yr−1 Mpc−3)=−1.63 ± 0.04, −1.07 ± 0.06, and −0.90 ± 0.10 for Hα, [OIII], and [O II], respectively. We find our [O III] and [O II] samples fully trace cosmic star formation activity at their respective redshifts in comparison to multiwavelength SFRDs, while the Hα sample traces ∼70 per cent of the total z = 0.47 SFRD.

galaxies↗

NASA NTRSDate not supplied

Strategic and Tactical Functions in an Autonomous Air Traffic Management System

This paper evaluates, by means of fast-time simulation, performance of a candidate system for autonomous air traffic management. Advancing towards autonomy in air traffic management may be necessary in order for new air vehicle types such as electric Vertical Take Off and Landing (eVTOL) to operate safely and efficiently in airspace shared with conventional traffic. To account for uncertain prediction, autonomous air traffic management was divided into two integrated and coordinated subsystems: strategic scheduling, performed at predeparture, and tactical conflict detection and resolution, performed throughout the flight. The conflict detection and resolution subsystem contained a second tactical scheduling function that applied to flights operating in the airspace near the destination airport. This paper compares and contrasts the two subsystems and uses fast-time simulation to demonstrate the comparisons. A scenario of 54 flights inbound to Newark Liberty International Airport was simulated multiple times with different parameters. The scenario was created using flight plans recorded from the National Airspace System on a low weather, average traffic day in April 2018. Whereas the routes were not changed, the departure times of the flights were modified to increase arrival rates at the Newark runway and arrival meter fixes. Results of the simulations showed that the autonomous air traffic management system was able to safely manage the traffic, even with prediction uncertainty. In addition, they showed the importance of including flight holding maneuvers, in addition to path stretching, in conflict detection and resolution and of coordinating strategic and tactical scheduling. Finally, a tradeoff between absorbing the delay calculated by strategic scheduling on the ground versus in the air showed that taking most of the delay on the ground is cost effective for a simple idealized cost function. However, taking a little of the delay in the air prevented throughput on the runway from dropping for short periods due to trajectory prediction uncertainty.

air traffic control↗

NASA NTRS2021

Strategic and Tactical Functions in an Autonomous Air Traffic Management System

This paper evaluates, by means of fast-time simulation, performance of a candidate system for autonomous air traffic management. Advancing towards autonomy in air traffic management may be necessary in order for new air vehicle types such as electric Vertical Take Off and Landing (eVTOL) to operate safely and efficiently in airspace shared with conventional traffic. To account for uncertain prediction, autonomous air traffic management was divided into two integrated and coordinated subsystems: strategic scheduling, performed at predeparture, and tactical conflict detection and resolution, performed throughout the flight. The conflict detection and resolution subsystem contained a second tactical scheduling function that applied to flights operating in the airspace near the destination airport. This paper compares and contrasts the two subsystems and uses fast-time simulation to demonstrate the comparisons. A scenario of 54 flights inbound to Newark Liberty International Airport was simulated multiple times with different parameters. The scenario was created using flight plans recorded from the National Airspace System on a low weather, average traffic day in April 2018. Whereas the routes were not changed, the departure times of the flights were modified to increase arrival rates at the Newark runway and arrival meter fixes. Results of the simulations showed that the autonomous air traffic management system was able to safely manage the traffic, even with prediction uncertainty. In addition, they showed the importance of including flight holding maneuvers, in addition to path stretching, in conflict detection and resolution and of coordinating strategic and tactical scheduling. Finally, a tradeoff between absorbing the delay calculated by strategic scheduling on the ground versus in the air showed that taking most of the delay on the ground is cost effective for a simple idealized cost function. However, taking a little of the delay in the air prevented throughput on the runway from dropping for short periods due to trajectory prediction uncertainty.

air traffic control↗

NASA NTRSDate not supplied

An Approach for Identifying IASMS Services, Functions, and Capabilities From Data Sources

Assuring safety in the NAS with the inclusion of new entrants that are part of Advanced Air Mobility (AAM) will require overcoming unique safety challenges that result from combining innovative technologies with novel airspace concepts for moving people and cargo using semi-autonomous/autonomous vehicles. Overcoming these AAM safety assurance challenges is the focus of the In-time Aviation Safety Management System (IASMS). The IASMS Concept of Operations (ConOps) describes an interconnected set of services, functions, and capabilities (SFCs)designed to manage operational risks, identify unknown risks, and inform system design to mitigate risk. This paper describes a broad approach for identifying SFCs involving technology trends in research, assessment of known and unknown risks in safety reports, and causal and contributing factors in aviation accidents and incidents. This approach leverages these sources to identify potential SFCs that enable the Monitor, Assess, and Mitigate (M-A-M)functionality that represents the enabling framework of the IASMS.

Kyle Ellis↗

NASA NTRS2021

ANOPP2’s Farassat Formulations Internal Functional Module (AFFIFM) Reference Manual

This manual documents version 1.4.0 of ANOPP2’s Farassat Formulations Internal Functional Modules (AFFIFMs) developed by NASA Langley Research Center’s Aeroacoustics Branch. The AFFIFMs provide the capability of calculating an acoustic pressure time history (APTH), or similar metric, provided one or more Ffowcs Williams and Hawkings (FWH) surfaces. AFFIFMs also allow for compact line sources. This application programming interface (API) is part of a larger toolkit called the Aircraft NOise Prediction Program 2 (ANOPP2). The goal of ANOPP2 is to provide the ability to independently: (1) assess aircraft system noise; (2) assess aircraft component noise; and (3) evaluate aircraft noise reduction technologies and flight procedures. Additionally, ANOPP2 is designed to provide a capability for understanding the fundamental physics involved in noise generation to support experiments and flight demonstration activities. As a component of ANOPP2, ANOPP2’s Farassat Formulations Internal Functional Modules and this document may be included as part of the ANOPP2 distribution, or they may be provided independent of that distribution. This is the ANOPP2 internal version of this document. It supersedes the NASA Internal Distribution(NID), US General Distribution (UGD), and General Public Distribution (GPD) versions.

Acoustics↗

NASA NTRS2022

Gas Trap Plug Design, Function and Performance

The cooling loops of the Internal Active Thermal Control System (IATCS) on the Node 3, Node 2 and US Laboratory (USL) Modules of the International Space Station (ISS) have been serviced by Gas Traps (GTs) since the onset of operations. These traps serve to protect the pumping function of the cooling loops by eliminating free gas that would otherwise impact the impellers and cause a loop shutdown. Gas Trap Plug Assemblies (GTPAs) have been designed, manufactured and tested, to permit function of the IATCS in the event of a loss of cabin atmosphere and long term decrew event. The GTPA also serve to give the crew additional time to evacuate the United States Operating Segment (USOS) in the unlikely event of an Ammonia breach of an Interface Heat Exchanger (IFHX). These GTPAs have been installed on the ISS IATCS since May 2019. This paper will address purpose, design and testing of the GTPA. The paper will also provide analyses showing residual trapping capability and free gas elimination of the GTs even while tightly plugged, for both the GTs and the Alternate Gas Trap Assemblies (AGTAs) ground spares.

Gas Trap Plugs↗

NASA NTRS2021

Functional Autonomy Challenges in Sampling for an Europa Lander Mission

We present a baseline approach to Functional Autonomyfor the purpose of conducting excavation and samplingbehaviors in a proposed Europa Lander mission. Aspects ofthe problems of site selection, excavation progress tracking,and fault identification are related; with particular emphasison parameters peculiar to an icy moon environment. Firstpass approaches to addressing these challenges are presentedin isolation, while motivating the current development goal ofproducing a general Functional Autonomy architecture thatallows state estimation, fault diagnosis, isolation, & recovery(FDIR), and adaptive behaviors to be formulated in concert.

Backes, Paul↗