Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic data collection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Ice Accretions and Full-Scale Iced Aerodynamic Performance Data for a Two-Dimensional NACA 23012 Airfoil

This report documents the data collected during the large wind tunnel campaigns conducted as part of the SUNSET project (StUdies oN Scaling EffecTs due to ice) also known as the Ice-Accretion Aerodynamics Simulation study: a joint effort by NASA, the Office National d'Etudes et Recherches Aérospatiales (ONERA), and the University of Illinois. These data form a benchmark database of full-scale ice accretions and corresponding ice-contaminated aerodynamic performance data for a two-dimensional (2D) NACA 23012 airfoil. The wider research effort also included an analysis of ice-contaminated aerodynamics that categorized ice accretions by aerodynamic effects and an investigation of subscale, low- Reynolds-number ice-contaminated aerodynamics for the NACA 23012 airfoil. The low-Reynolds-number investigation included an analysis of the geometric fidelity needed to reliably assess aerodynamic effects of airfoil icing using artificial ice shapes. Included herein are records of the ice accreted during campaigns in NASA Glenn Research Center's Icing Research Tunnel (IRT). Two different 2D NACA 23012 airfoil models were used during these campaigns; an 18-in. (45.7-cm) chord (subscale) model and a 72-in. (182.9-cm) chord (full-scale) model. The aircraft icing conditions used during these campaigns were selected from the Federal Aviation Administration's (FAA's) Code of Federal Regulations (CFR) Part 25 Appendix C icing envelopes. The records include the test conditions, photographs of the ice accreted, tracings of the ice, and ice depth measurements. Model coordinates and pressure tap locations are also presented. Also included herein are the data recorded during a wind tunnel campaign conducted in the F1 Subsonic Pressurized Wind Tunnel of ONERA. The F1 tunnel is a pressured, high- Reynolds-number facility that could accommodate the full-scale (72-in. (182.9-cm) chord) 2D NACA 23012 model. Molds were made of the ice accreted during selected test runs of the full-scale model in the IRT. From these molds, castings were made that closely replicated the features of the accreted ice. The castings were then mounted on the full-scale model in the F1 tunnel, and aerodynamic performance measurements were made using model surface pressure taps, the facility force balance system, and a large wake rake designed specifically for these tests. Tests were run over a range of Reynolds and Mach numbers. For each run, the model was rotated over a range of angles-of-attack that included airfoil stall. The benchmark data collected during these campaigns were, and continue to be, used for various purposes. The full-scale data form a unique, ice-accretion and associated aerodynamic performance dataset that can be used as a reference when addressing concerns regarding the use of subscale ice-accretion data to assess full-scale icing effects. Further, the data may be used in the development or enhancement of both ice-accretion prediction codes and computational fluid dynamic codes when applied to study the effects of icing. Finally, as was done in the wider study, the data may be used to help determine the level of geometric fidelity needed for artificial ice used to assess aerodynamic degradation due to aircraft icing. The structured, multifaceted approach used in this research effort provides a unique perspective on the aerodynamic effects of aircraft icing. The data presented in this report are available in electronic form upon formal approval by proper NASA and ONERA authorities.

Addy, Harold E., Jr.↗
DOE OSTI2021

The Rise of Neural Networks for Materials and Chemical Dynamics

Machine learning (ML) is quickly becoming a premier tool for modeling chemical processes and materials. ML-based force fields, trained on large data sets of high-quality electron structure calculations, are particularly attractive due their unique combination of computational efficiency and physical accuracy. This Perspective summarizes some recent advances in the development of neural network-based interatomic potentials. Designing high-quality training data sets is crucial to overall model accuracy. One strategy is active learning, in which new data are automatically collected for atomic configurations that produce large ML uncertainties. Another strategy is to use the highest levels of quantum theory possible. Transfer learning allows training to a data set of mixed fidelity. A model initially trained to a large data set of density functional theory calculations can be significantly improved by retraining to a relatively small data set of expensive coupled cluster theory calculations. These advances are exemplified by applications to molecules and materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enriched Background Isotope Study (EBIS): Analysis of 14C-Enriched Carbon Cycle in Soils and Litter at Forested Oak Ridge and AmeriFlux Sites, 2001-2011

These data provide a record of the multi-year, multi-institutional Enriched Background Isotope Studies (EBIS) projects that ran from 2000 through 2011. Elevated levels of 14C enriched CO2 in the air and soil atmosphere as well as leaf, stem, and root tissues were observed on the Oak Ridge Reservations (ORR) during the summer of 1999, and were attributed to local incinerator activities on and/or near the ORR (Trumbore et al. 2002). The isolated enrichment of the background levels of 14C in local forest ecosystem represented a unique opportunity to study unresolved carbon cycling processes such as the contribution of leaf versus root litter contributions to soil carbon accumulation, the rate of vertical transport of carbon into deep soil storage pools, and the differential contribution of physicochemical versus faunal driven processes to soil carbon cycling and sequestration. Leaf litter from the local enriched forest was transplanted to selected sites on the ORR and to selected AmeriFlux study sites to study soil C cycling across a range of soils and climates. The EBIS research projects provide data on C flux from litter sources to mineral soil sinks for United States eastern hardwood forests necessary for testing process hypotheses and judging efficacy of soil C cycling models. Experimental results from this study are being used to parameterize and refine existing carbon dynamics models, the quantification of the long-term fate of ecosystem carbon inputs and as a means to judge the potential for ecosystem carbon sequestration via enhance litter inputs to soil. EBIS observations support conclusions that intra- and inter-annual soil carbon cycling in hardwood forest soils should be characterized as a least a two-compartment system where surface leaf-litter and belowground root turnover represent primary carbon sources for organic-layer and mineral-soil carbon cycles, respectively. EBIS experiments were conducted to complete enriched litterfall maniplations in upland forests on Ultisol and Inceptisol soils of the Oak Ridge Reservation, Oak Ridge, Tennessee. We also collected additional14C-enriched materials for new experimental applications, and applied those materials to multiple AmeriFlux sites over a range of climatic, edaphic and biological conditions. The research provided data for addressing DOE's goal of understanding mechanisms controlling C flux, and for the improvement of models to be applied to policy discussions regarding the safe levels of greenhouse gases for the earth's system. There are 5 data files provided in comma separated (*.csv) format for vegetation, field litter, soil and air [C] and C isotope data from the EBIS studies and associated environmental data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2013

Evaluation of Instrumentation and Dynamic Thermal Ratings for Overhead Lines

In 2010, a project was initiated through a partnership between the Department of Energy (DOE) and the New York Power Authority (NYPA) to evaluate EPRI's rating technology and instrumentation that can be used to monitor the thermal states of transmission lines and provide the required real-time data for real-time rating calculations. The project included the installation and maintenance of various instruments at three 230 kV line sites in northern New York. The instruments were monitored, and data collection and rating calculations were performed for about a three year period.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2013

Collective Flow and Viscosity in Relativistic Heavy-Ion Collisions

We review collective flow, its anisotropies, and its event-to-event fluctuations in relativistic heavy-ion collisions, as well as the extraction of the specific shear viscosity of quark–gluon plasma from collective flow data collected in heavy-ion collision experiments at RHIC and the LHC. We emphasize the similarities between the Big Bang of our universe and the Little Bangs created in heavy-ion collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRSDate not supplied

Design, Instrumentation, and Data Analysis for the SLS Core Stage Green Run Test Series

The Space Launch System (SLS) Core Stage (CS) Thrust Vector Control (TVC) system is comprised of eight mechanical feedback Shuttle heritage Type III TVC actuators and four RS-25 engines, each attached to a Shuttle heritage gimbal block/bearing. The actuators are powered by a Shuttle-derived hydraulic Core Auxiliary Power Unit (CAPU), and integrated with an all-new Core Stage thrust structure. The actuators are interfaced to the SLS Vehicle Management (VM) software via an all-new TVC Actuator Control (TAC) avionics subsystem. Despite the significant test and flight experience of the Shuttle hardware, the SLS Green Run ambient and hot fire test activities revealed a number of new findings associated with the dynamic response of the TVC integrated system. Test responses suggested that the TVC system did not meet its performance specifications and its step and frequency responses exhibited unexpected departures from prior lab tests and modeled behavior. This paper is the fifth installment in a seven-paper series surveying the design, engineering, test validation, and flight performance of the Core Stage Thrust Vector Control system. In this paper, the design of the TVC analyses conducted during the Core Stage Green Run test series are discussed in detail. Throughout the course of the test activities, the SLS flight control team worked diligently with the Core Stage contractor to revise test command profiles and ensure sufficient instrumentation was available to collect data. Post-test analysis combined the Green Run modal, ambient, and hot fire test data, MSFC 2- axis Core Stage TVC Inertial Load Simulator (ILS) data, Hardware-In-the-Loop (HWIL) Systems Integration Lab (SIL) results, and actuator Acceptance Testing Procedure (ATP) responses. These data were used to characterize the response, validate critical math models of the TVC subsystem, and isolate the probable cause of the unexpected responses. Through comprehensive analysis of the available test data sources, the integrated team identified the dominant contributors to the observed response and developed test-correlated rationale for vehicle flight control system performance, ultimately leading to a confident posture for the Artemis I mission.

John H. Wall↗
DOE OSTI2022

Global Carbon Budget 2021

Abstract. Accurate assessment of anthropogenic carbon dioxide (CO2) emissions and their redistribution among the atmosphere, ocean, and terrestrial biosphere in a changing climate is critical to better understand the global carbon cycle, support the development of climate policies, and project future climate change. Here we describe and synthesize datasets and methodology to quantify the five major components of the global carbon budget and their uncertainties. Fossil CO2 emissions (EFOS) are based on energy statistics and cement production data, while emissions from land-use change (ELUC), mainly deforestation, are based on land use and land-use change data and bookkeeping models. Atmospheric CO2 concentration is measured directly, and its growth rate (GATM) is computed from the annual changes in concentration. The ocean CO2 sink (SOCEAN) is estimated with global ocean biogeochemistry models and observation-based data products. The terrestrial CO2 sink (SLAND) is estimated with dynamic global vegetation models. The resulting carbon budget imbalance (BIM), the difference between the estimated total emissions and the estimated changes in the atmosphere, ocean, and terrestrial biosphere, is a measure of imperfect data and understanding of the contemporary carbon cycle. All uncertainties are reported as ±1σ. For the first time, an approach is shown to reconcile the difference in our ELUC estimate with the one from national greenhouse gas inventories, supporting the assessment of collective countries' climate progress. For the year 2020, EFOS declined by 5.4 % relative to 2019, with fossil emissions at 9.5 ± 0.5 GtC yr−1 (9.3 ± 0.5 GtC yr−1 when the cement carbonation sink is included), and ELUC was 0.9 ± 0.7 GtC yr−1, for a total anthropogenic CO2 emission of 10.2 ± 0.8 GtC yr−1 (37.4 ± 2.9 GtCO2). Also, for 2020, GATM was 5.0 ± 0.2 GtC yr−1 (2.4 ± 0.1 ppm yr−1), SOCEAN was 3.0 ± 0.4 GtC yr−1, and SLAND was 2.9 ± 1 GtC yr−1, with a BIM of −0.8 GtC yr−1. The global atmospheric CO2 concentration averaged over 2020 reached 412.45 ± 0.1 ppm. Preliminary data for 2021 suggest a rebound in EFOS relative to 2020 of +4.8 % (4.2 % to 5.4 %) globally. Overall, the mean and trend in the components of the global carbon budget are consistently estimated over the period 1959–2020, but discrepancies of up to 1 GtC yr−1 persist for the representation of annual to semi-decadal variability in CO2 fluxes. Comparison of estimates from multiple approaches and observations shows (1) a persistent large uncertainty in the estimate of land-use changes emissions, (2) a low agreement between the different methods on the magnitude of the land CO2 flux in the northern extra-tropics, and (3) a discrepancy between the different methods on the strength of the ocean sink over the last decade. This living data update documents changes in the methods and datasets used in this new global carbon budget and the progress in understanding of the global carbon cycle compared with previous publications of this dataset (Friedlingstein et al., 2020, 2019; Le Quéré et al., 2018b, a, 2016, 2015b, a, 2014, 2013). The data presented in this work are available at https://doi.org/10.18160/gcp-2021 (Friedlingstein et al., 2021).

Friedlingstein, Pierre (ORCID:0000000333094739)↗
NASA NTRS1990

Seasonal and interannual changes in cirrus

Statistics on cirrus clouds using the multispectral data from the GOES/VAS satellite have been collected since 1985. The method used to diagnose cirrus clouds and a summary of the first two years of data was given in Wylie and Menzel (1989) and at the 1988 FIRE meeting in Vail, CO. This study was expanded to three years of data which allows a more detailed discussion of the geographical and seasonal changes in cloud cover. Interannual changes in cloud cover also were studied. GOES/VAS cloud retrievals also were compared to atmospheric dynamic parameters and to radiative attenuation data taken by a lidar. Some of the highlights of these studies are discussed.

Wylie, Donald P.↗
NASA NTRS1992

A new mechanism for viscosity in cloudy accretion disks - Anomalous (turbulent) viscosity

We analyze the dynamics of a rotating cloudy gaseous medium relative to 2D perturbations having wavelengths shorter than the disk thickness. The viscosity due to cloud-cloud collisions is confronted with the derived critical viscosity, below which a collective mode of perturbations in the disk is able to grow until going into the saturation regime where fully developed turbulence is established. It is shown that for the assumed parameters of AGN accretion disks consistent with the observational data, the viscosity due to collective modes usually dominates over that due to cloud-cloud collisions.

Fridman, Aleksei↗
NASA NTRS1999

Physical and Chemical Characterization of Particles in the Upper Troposphere and Lower Stratosphere: Microanalysis of Aerosol Impactor Samples

Herein is reported activities to support the characterization of the aerosol in the upper troposphere (UT) and lower stratosphere (LS) collected during the Airborne Southern Hemisphere Ozone Experiment/Measurements for Assessing the Effects of Stratospheric Aircraft (ASHOE/MAESA) missions in 1994. Through a companion proposal, another group was to measure the size distribution of aerosols in the 0.008 to 2 micrometer diameter range and to collect for us impactor samples of particles larger than about 0.02 gm. In the first year, we conducted laboratory studies related to particulate deposition patterns on our collection substrates, and have performed the analysis of many ASHOE/MAESA aerosol samples from 1994 using analytical electron microscopy (AEM). We have been building an "aerosol climatology" with these data that documents the types and relative abundances of particles observed at different latitudes and altitudes. The second year (and non-funded extension periods) saw continued analyses of impactor aerosol samples, including more ASHOE/MAESA samples, some northern hemisphere samples from the NASA Stratospheric Photochemistry Aerosols and Dynamics Expedition (SPADE) program for comparison, and a few aerosol samples from the NASA Stratospheric TRacers of Atmospheric Transport (STRAT) program. A high-resolution field emission microscope was used for the analysis and re-analysis of a number of samples to determine if this instrument was superior in performance to our conventional electron microscope. In addition, some basic laboratory studies were conducted to determine the minimum detectable and analyzable particle size for different types of aerosols. In all, 61 aerosol samples were analyzed, with a total of over 30,000 individual particle analyses. In all analyzed samples, sulfate particles comprised the major aerosol number fraction. It must be stressed that particles composed of more than one species, for example sulfate and organic carbon, were classified according to the major fraction. Thus, many of the particles classified as sulfate may have contained significant mass fractions of carbonaceous or other material. These particles for the most part did not show two physical phases, however. Nonsulfate particles were classified according to the physical and chemical characteristics of each particle, and were grouped into the major nonsulfate particle classes, including C-rich, crustal, metallic, and salts. Our UT and LS sample analyses indicate a maximum for crustal and C-rich particle abundance in the Northern Hemisphere upper troposphere, and a salt particle maximum in the Southern Hemisphere upper troposphere. Metallic particles are clearly more prevalent in the troposphere than in the stratosphere, but interhemispheric differences appear small.

Sheridan, Patrick J.↗
NASA NTRS2007

Review of Cranked-Arrow Wing Aerodynamics Project: Its International Aeronautical Community Role

This paper provides a brief history of the F-16XL-1 aircraft, its role in the High Speed Research (HSR) program and how it was morphed into the Cranked Arrow Wing Aerodynamics Project (CAWAP). Various flight, wind-tunnel and Computational Fluid Dynamics (CFD) data sets were generated during the CAWAP. These unique and open flight datasets for surface pressures, boundary-layer profiles and skinfriction distributions, along with surface flow data, are described and sample data comparisons given. This is followed by a description of how the project became internationalized to be known as Cranked Arrow Wing Aerodynamics Project International (CAWAPI) and is concluded by an introduction to the results of a 4 year CFD predictive study of data collected at flight conditions by participating researchers.

Lamar, John E.↗
NASA NTRS2020

Delta Cp RMS and Shadowgraph Data from t11-0377 (ATAT)

The plots included in this NF-1676 were collected during a recent wind tunnel test at the 11’x11’ Transonic test section of the Unitary Plan Wind Tunnel. The data is not SBU or ITAR since the images are qualitative and do not share model measurements. The on-body data is Delta Cp RMS. The off-body data is Time-Variance of the Shadowgraph intensity. No tunnel conditions other than Mach, Alpha, Beta, and Tunnel Drive Speed (RPM) are shared. Most importantly, dynamic pressure and static pressure are not included.

Aerodynamics↗
DOE OSTI2021

A Taxonomic Classification Approach for Global Spatio-temporal Data

The World Bank, World Health Organization, and other major vendors collectively provide thousands of global time series datasets that focus on issues of the environment, public health, economics, violence, education, and national security. Sorting these data into meaningful information requires the use of data mining techniques to cluster trends into an orderly and manageable number of cases. The World SpatioTemporal Analytics and Mapping (WSTAMP) project database (wstamp.ornl.gov) was developed to spatiotemporally harmonize global vendor data (23,300+ attributes, 200+ locations, 50+ years). Within the WSTAMP analytical environment, Dynamic Time Warping (DTW) has been a highly effective data-driven approach for clustering and mapping these time series into national spatiotemporal behavior maps. Two significant properties have surfaced from this work. First, several recognizable cluster patterns have emerged and persist across a range of locations, attributes, and time frames (e.g., increasing, decreasing, rebounding, peak, oscillating). Secondly, practitioners engaging WSTAMP have noted the explanatory and anticipatory value of these patterns and articulated particular interest in detecting them within the spatiotemporal cube. This need was addressed by shifting DTW-based clustering from an open ended, data-driven implementation to a taxonomic pattern matching approach. This paper presents the method including implementation strategies for visualization and human computer interaction and applies the approach to a sample data set and concludes with next steps.

Stewart, Robert↗
DOE OSTI2024

Measurement of Wind Loading on Heliostats at the Crescent Dunes Power Plant: An Overview

The cost of solar collectors constitutes almost one third of the total cost of a CSP plant. One of the ongoing challenges in the design of these collectors is wind loading on mirrors, support structures, and drives. A particular challenge is dynamic wind loading, caused by the turbulent wind flow. To date, the design of solar collector structures has relied on wind tunnel experiments and numerical simulations that do not entirely capture the dynamic effects observed at scale. The CSP industry has shown increased interest in validating the idealized assumptions with measurements obtained in operational settings to improve wind load assumptions and increase reliability and cost-efficiency of the collector design. Further, performance models need realistic assumptions about wind loading and its impact on optical performance. In a parabolic trough field campaign, NREL successfully collected a wealth of long-term, high-resolution wind and loads data [2], that are publicly available and that can be used for the above-mentioned purposes. Heliostats are impacted differently by wind than parabolic troughs, due to their different shape, size, and field layout. To study the impact of wind and turbulence on heliostats, we initiated another field campaign in an operational power- tower plant, Crescent Dunes, in Nevada, USA. In this work, we present an overview of the measurements, first results, and potential implications of wind driven loads on Heliostats.

concentrated solar power↗
DOE OSTI2011

An Erlang-Based Front End Framework for Accelerator Controls

We have developed a new front-end framework for the ACNET control system in Erlang. Erlang is a functional programming language developed for real-time telecommunications applications. The primary task of the front-end software is to connect the control system with drivers collecting data from individual field bus devices. Erlang's concurrency and message passing support have proven well-suited for managing large numbers of independent ACNET client requests for front-end data. Other Erlang features which make it particularly well-suited for a front-end framework include fault-tolerance with process monitoring and restarting, real-time response,and the ability to change code in running systems. Erlang's interactive shell and dynamic typing make writing and running unit tests an easy part of the development process. Erlang includes mechanisms for distributing applications which we will use for deploying our framework to multiple front-ends, along with a configured s et of device drivers. We've developed Erlang code to use Fermilab's TCLK event distribution clock and Erlang's interface to C/C++ allows hardware-specific driver access.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Multi-modal Energy-optimal Trip Scheduling in Real-time (METS-R) for Transportation Hubs (Final Report)

This report summarizes the work performed under the award number EE0008524. The project develops the Multi-modal Energy-optimal Trip Scheduling in Real-time (METS-R) platform as the next-generation transportation solution based on autonomous electric vehicles (AEV) serving passenger trips from and to urban transportation hubs, to substantially reduce transportation energy consumption. Extensive data collection and analyses were first conducted to understand the demand patterns and energy consumption of hub-based on-road trips. Then, a data-driven framework that consists of an analytical module and a simulation module was proposed. For the analytical module, five planning + operation tools were developed to support the planning and energy-efficient operations of urban AEV services: the charging station planning that robotically allocates charging supplies based on the stationary charging demand distribution; the transit planning and demand adaptive scheduling model that efficiently generates\ candidate transit routes from hubs to other places and dynamically adjusts the transit time table to fit the current demand; the online energy-efficient routing that learns the energy-optimal paths from observations of link-level energy consumption in real-time; the hub-based ridesharing that matches trip requests together with account for the uncertainty of future trip demand and vehicle supply; and finally, the integrated demand prediction and anomaly detection pipeline that leverages the flight/train time table and support other planning/operation tools. To demonstrate the performance of these tools, a scalable high-performance agent-based simulator was built. We divided the urban space into multiple service zones where each zone was considered as an agent for passenger generation and vehicle charging. Two types of AEV agents were coded to model two types of mobility services: AEV taxi and AEV transit. For the AEV taxi, the team implemented the functions of pickup/drop-off passengers, energy-efficient routing, ridesharing, fleet rebalancing, and recharging. For the AEV bus, the team implemented the functions of demand-adaptive route scheduling, passenger boarding, and recharging. A high-performance computing framework was introduced to receive various profiling information (such as link energy updates, vehicle speed) from the simulator instances and communicate the operational commands back to the instances. The numerical experiments show that each of the proposed operational algorithms can reduce energy consumption and improve system efficiency. Furthermore, there exists the need to collectively consider multiple planning + operational strategies as multiple strategies can influence each other in terms of performance impacts. Recommendations for future work related to AEV planning and simulation are discussed.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2018

Kinematic Flexibility Analysis: Hydrogen Bonding Patterns Impart a Spatial Hierarchy of Protein Motion

Elastic network models (ENMs) and constraint-based, topological rigidity analysis are two distinct, coarse-grained approaches to study conformational flexibility of macromolecules. In the two decades since their introduction, both have contributed significantly to insights into protein molecular mechanisms and function. However, despite a shared purpose of these approaches, the topological nature of rigidity analysis, and thereby the absence of motion modes, has impeded a direct comparison. We present an alternative, kinematic approach to rigidity analysis, which circumvents these drawbacks. We introduce a novel protein hydrogen bond network spectral decomposition, which provides an orthonormal basis for collective motions modulated by noncovalent interactions, analogous to the eigenspectrum of normal modes. The zero modes decompose proteins into rigid clusters identical to those from topological rigidity, while nonzero modes rank protein motions by their hydrogen bond collective energy penalty. Our kinematic flexibility analysis bridges topological rigidity theory and ENM, enabling a detailed analysis of motion modes obtained from both approaches. Analysis of a large, structurally diverse data set revealed that collectivity of protein motions, reported by the Shannon entropy, is significantly reduced for rigidity theory compared to normal mode approaches. Strikingly, kinematic flexibility analysis suggests that the hydrogen bonding network encodes a protein-fold specific, spatial hierarchy of motions, which goes nearly undetected in ENM. This hierarchy reveals distinct motion regimes that rationalize experimental and simulated protein stiffness variations. Kinematic motion modes highly correlate with reported crystallographic B factors and molecular dynamics simulations of adenylate kinase. A formal expression for changes in free energy derived from the spectral decomposition indicates that motions across nearly 40% of modes obey enthalpy–entropy compensation. Taken together, our results suggest that hydrogen bond networks have evolved to modulate protein structure and dynamics, which can be efficiently probed by kinematic flexibility analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

A FEEDBACK-DRIVEN BUBBLE G24.136+00.436: A POSSIBLE SITE OF TRIGGERED STAR FORMATION

We present a multi-wavelength study of the IR bubble G24.136+00.436. The J = 1-0 observations of {sup 12}CO, {sup 13}CO, and C{sup 18}O were carried out with the Purple Mountain Observatory 13.7 m telescope. Molecular gas with a velocity of 94.8 km s{sup –1} is found prominently in the southeast of the bubble, shaped as a shell with a total mass of ∼2 × 10{sup 4} M {sub ☉}. It was likely assembled during the expansion of the bubble. The expanding shell consists of six dense cores, whose dense (a few of 10{sup 3} cm{sup –3}) and massive (a few of 10{sup 3} M {sub ☉}) characteristics coupled with the broad linewidths (>2.5 km s{sup –1}) suggest that they are promising sites for forming high-mass stars or clusters. This could be further consolidated by the detection of compact H II regions in Cores A and E. We tentatively identified and classified 63 candidate young stellar objects (YSOs) based on the Spitzer and UKIDSS data. They are found to be dominantly distributed in regions with strong molecular gas emission, indicative of active star formation, especially in the shell. The H II region inside the bubble is mainly ionized by a ∼O8V star(s), of the dynamical age of ∼1.6 Myr. The enhanced number of candidate YSOs and secondary star formation in the shell as well as the timescales involved, indicate a possible scenario for triggering star formation, signified by the ''collect and collapse'' process.

79 ASTRONOMY AND ASTROPHYSICS↗