Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dielectrics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dual Optical Hyperbolicity of PdCoO 2 and PdCrO 2 Delafossite Single Crystals

Hyperbolic materials exhibit a very peculiar optical anisotropy with simultaneously different signs of the dielectric tensor components. This anisotropy allows the propagation of exotic surface-wave excitations like hyperbolic phonons and plasmon polaritons. While hyperbolic materials hold promise for applications in subwavelength photonics and enhanced light-matter interactions, their natural occurrence is limited to a few materials, often accompanied by significant dielectric losses and limited hyperbolic spectral bandwidth. Focusing on PdCoO 2 and PdCrO 2 delafossite transition-metal oxides, in this paper unique dual hyperbolic regimes are demonstrated:: one localized around a phonon absorption in the mid-infrared spectral region, and the other extending into the visible range. Both hyperbolic regimes show exceptional properties including low dissipation and high hyperbolic quality factors. These results pave the way for innovative applications of delafossite layered metals in subwavelength photonics, imaging, and sensing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Near‐Field Characterization of Higher‐Order Topological Photonic States at Optical Frequencies

Abstract Higher‐order topological insulators (HOTIs) represent a new type of topological system, supporting boundary states localized over boundaries, two or more dimensions lower than the dimensionality of the system itself. Interestingly, photonic HOTIs can possess a richer physics than their original condensed matter counterpart, supporting conventional HOTI states based on tight‐binding coupling, and a new type of topological HOTI states enabled by long‐range interactions. Here, a new mechanism to establish all‐dielectric infrared HOTI metasurfaces exhibiting both types of HOTI states is proposed, supported by a topological transition accompanied by the emergence of topological Wannier‐type polarization. Two kinds of near‐field experimental studies are performed: i) the solid immersion spectroscopy and ii) near‐field imaging using scattering scanning near‐field optical microscopy to directly observe the topological transition and the emergence of HOTI states of two types. It is shown that the near‐field profiles indicate the displacement of the Wannier center across the topological transition leading to the topological dipole polarization and emergence of the topological boundary states. The proposed all‐dielectric HOTI metasurface offers a new approach to confine the optical field in micro‐ and nano‐scale topological cavities and thus paves the way to achieve a novel nanophotonic technology.

Vakulenko, Anton↗
DOE OSTI2021

Exploring the Pb 1− x Sr x HfO 3 System and Potential for High Capacitive Energy Storage Density and Efficiency

Abstract The hafnate perovskites PbHfO 3 (antiferroelectric) and SrHfO 3 (“potential” ferroelectric) are studied as epitaxial thin films on SrTiO 3 (001) substrates with the added opportunity of observing a morphotropic phase boundary (MPB) in the Pb 1− x Sr x HfO 3 system. The resulting (240)‐oriented PbHfO 3 ( Pba 2) films exhibited antiferroelectric switching with a saturation polarization ≈53 µC cm −2 at 1.6 MV cm −1 , weak‐field dielectric constant ≈186 at 298 K, and an antiferroelectric‐to‐paraelectric phase transition at ≈518 K. (002)‐oriented SrHfO 3 films exhibited neither ferroelectric behavior nor evidence of a polar P 4 mm phase . Instead, the SrHfO 3 films exhibited a weak‐field dielectric constant ≈25 at 298 K and no signs of a structural transition to a polar phase as a function of temperature (77–623 K) and electric field (–3 to 3 MV cm −1 ). While the lack of ferroelectric order in SrHfO 3 removes the potential for MPB, structural and property evolution of the Pb 1− x Sr x HfO 3 (0 ≤ x < 1) system is explored. Strontium alloying increased the electric‐breakdown strength ( E B ) and decreased hysteresis loss, thus enhancing the capacitive energy storage density ( U r ) and efficiency (η). The composition, Pb 0.5 Sr 0.5 HfO 3 produced the best combination of E B = 5.12 ± 0.5 MV cm −1 , U r = 77 ± 5 J cm −3 , and η = 97 ± 2%, well out‐performing PbHfO 3 and other antiferroelectric oxides.

Acharya, Megha↗
DOE OSTI2023

Emergent Ferroelectric Switching Behavior from Polar Vortex Lattice

We report topologically protected polar textures have provided a rich playground for the exploration of novel, emergent phenomena. Recent discoveries indicate that ferroelectric vortices and skyrmions not only host properties markedly different from traditional ferroelectrics, but also that these properties can be harnessed for unique memory devices. Using a combination of capacitor-based capacitance measurements and computational models, it is demonstrated that polar vortices in dielectric–ferroelectric–dielectric trilayers exhibit classical ferroelectric bi-stability together with the existence of low-field metastable polarization states. This behavior is directly tied to the in-plane vortex ordering, and it is shown that it can be used as a new method of non-destructive readout-out of the poled state.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ultrathin Magnesium-Based Coating as an Efficient Oxygen Barrier for Superconducting Circuit Materials

Scaling up superconducting quantum circuits based on transmon qubits necessitates substantial enhancements in qubit coherence time. Over recent years, tantalum (Ta) has emerged as a promising candidate for transmon qubits, surpassing conventional counterparts in terms of coherence time. However, amorphous surface Ta oxide layer may introduce dielectric loss, ultimately placing a limit on the coherence time. In this study, a novel approach for suppressing the formation of tantalum oxide using an ultrathin magnesium (Mg) capping layer is presented. Synchrotron-based X-ray photoelectron spectroscopy studies demonstrate that oxide is confined to an extremely thin region directly beneath the Mg/Ta interface. Additionally, it is demonstrated that the superconducting properties of thin Ta films are improved following the Mg capping, exhibiting sharper and higher-temperature transitions to superconductive and magnetically ordered states. Moreover, an atomic-scale mechanistic understanding of the role of the capping layer in protecting Ta from oxidation is established based on computational modeling. Further, this work provides valuable insights into the formation mechanism and functionality of surface tantalum oxide, as well as a new materials design principle with the potential to reduce dielectric loss in superconducting quantum materials. Ultimately, the findings pave the way for the realization of large-scale, high-performance quantum computing systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Highly Responsive Polar Vortices in All‐Ferroelectric Heterostructures

Abstract The discovery of polar vortices and skyrmions in ferroelectric‐dielectric superlattices [such as (PbTiO 3 ) n /(SrTiO 3 ) n ] has ushered in an era of novel dipolar topologies and corresponding emergent phenomena. The key to creating such emergent features has generally been considered to be related to counterpoising strongly polar and non‐polar materials thus creating the appropriate boundary conditions. This limits the utility these materials can have, however, by rendering (effectively) half of the structure unresponsive to applied stimuli. Here, using advanced thin‐film deposition and an array of characterization and simulation approaches, polar vortices are realized in all‐ferroelectric trilayers, multilayers, and superlattices built from the fundamental building block of (PbTiO 3 ) n /(Pb x Sr 1− x TiO 3 ) n wherein in‐plane ferroelectric polarization in the Pb x Sr 1− x TiO 3 provides the appropriate boundary conditions. These superlattices exhibit substantially enhanced electromechanical and ferroelectric responses in the out‐of‐plane direction that arise from the ability of the polarization in both layers to rotate to the out‐of‐plane direction under field. In the in‐plane direction, the layers are found to be strongly coupled during switching and when heterostructured with ferroelectric‐dielectric building blocks, it is possible to produce multistate switching. This approach expands the realm of systems supporting emergent dipolar texture formation and does so with entirely ferroelectric materials thus greatly improving their responses.

Kavle, Pravin↗
DOE OSTI2025

Revisiting the Role of Entropy for Charge Separation in 1D Pi-Conjugated Semiconductors

Free carrier generation in organic donor/acceptor heterojunctions and redox-doped organic semiconductors is poorly understood, since assumed tight electron-hole binding conflicts with observed high free carrier yields. Cornerstone analyses that have guided the field for over 15 years predict that entropy can stabilize free charges in 2D and 3D pi-conjugated semiconductors but not in 1D systems. Here, the impact of entropy on charge generation in 1D pi-conjugated semiconductors is revisited by exploiting a greatly simplified system where enthalpy considerations alone should not allow for free charge generation. Noncontact solution-phase microwave conductivity is used to investigate the carrier density-dependent conductivity and dielectric constant in isolated chemically doped semiconducting single-walled carbon nanotubes in a low-dielectric solvent. Dopant chemical structure dramatically influences the carrier density-dependent complex conductivity, with bulky dopants facilitating carrier escape even at carrier densities below one carrier per nanotube. Three distinct numerical calculations show that entropic stabilization dramatically lowers the Gibbs energy barrier for free charge generation, explaining the high yield of free carriers, even in 1D. This renewed understanding of entropy's role in carrier generation has important implications for designing organic electronic devices-such as solar cells and thermoelectric energy harvesters-for enhanced carrier yield, conductivity, and performance.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tunable Magnetic and Optical Anisotropy in ZrO 2 ‐Co Vertically Aligned Nanocomposites

Abstract Metamaterials have gained great research interest in recent years owing to their potential for property tunability, multifunctionality, and property coupling. As a new group of self‐assembled thin films, vertically aligned nanocomposite (VAN)‐based hybrid metamaterials have been demonstrated with significant anisotropic physical properties and a broad range of property tailorability, such as optical anisotropy, magnetic anisotropy, hyperbolic dispersion, and enhanced second harmonic generation properties. Herein, self‐assembled ZrO 2 ‐Co nanocomposite films, with high epitaxial quality and ultra‐fine vertically aligned Co nanopillars (with an average diameter of ≈2 nm) embedded in a ZrO 2 matrix, are fabricated using a pulsed laser deposition (PLD) method. The Co pillar density can be effectively tuned by varying the Co concentration in the target, which results in tunable optical properties and magnetic properties. Specifically, a high saturation magnetization of 100 emu cm −3 , strong out‐of‐plane magnetic anisotropy and tailorable magnetization properties are achieved via tuning the Co nanopillar density. Coupled with hyperbolic dispersion of dielectric constant from 950 to 1500 nm in wavelength, plasmonic Co metal nanopillars, and the unique dielectric ZrO 2 matrix, this new nanoscale hybrid metamaterial shows great potential for future integrated optical and magnetic device designs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Design of 3D Oxide–Metal Hybrid Metamaterial for Tailorable Light–Matter Interactions in Visible and Near-Infrared Region

Dielectric–metallic hybrid metamaterials exhibit extraordinary optical properties due to the light–matter interactions at the dielectric–metallic interfaces. The ability in precision control of the light–matter interactions in nanoscale is key to tailor the optical properties of hybrid metamaterials. In this work, a complex 3D framework of multilayered self-assembled BaTiO 3 (BTO)-Au hybrid thin films is demonstrated with such precision control of the light–matter interaction in nanoscale. Here, unique “bamboo-like” Au nanostructures are formed via the bilayer and trilayer stacking of BTO-Au hybrid layers with interlayers of SrTiO 3 , CeO 2 , or MgO. Different film strain states introduced by the three interlayers result in variable diameter and density of Au nanopillars. Both simulated and experimental optical data demonstrate the localized surface plasmon resonance change and hyperbolic dispersion wavelength shift in visible to near-infrared because of the effective tuning of the Au nanopillar aspect ratio and free electron density. The highly tunable optical properties along with the ferroelectric behavior and thermal robustness of the 3D hybrid film enable it to be a great candidate for multifunctional applications. This study demonstrates a unique 3D approach for precision optical property tuning and combined functionalities in oxide–metal metamaterial systems toward future integrated photonic and electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Experimental Demonstration of Dark‐State Metasurface Laser with Controllable Radiative Coupling

Abstract Lasing at the nanoscale using plasmonic nanoparticles offers the prospect of strong field concentration, hence strong light−matter interactions, low lasing thresholds, and ultrafast operation. However plasmonic nanoparticles suffer from high dissipative and radiative losses, the latter being rigidly tied to the shape of the nanoparticles and symmetry of their localized plasmon resonant modes. To overcome this limitation, recent theoretical work proposes using direct lasing into dark surface states to construct lasers that conceptually allow for independent implementation of the lasing state and its coherent radiation output. Here, lasing in dark resonant states of a metasurface laser and controllable coherent outcoupling of radiation with the aid of a tightly coupled, weakly radiative metasurface are demonstrated experimentally. The laser is implemented using a thin, low‐loss dielectric film supporting surface mode‐like dark dielectric bound states and the coupling metasurface is composed of small non‐resonant scatterers that controllably but weakly perturb the dark mode and turn it partially bright. Distinct far‐field signatures that can be observed experimentally for both dark and bright lasing are identified and demonstrated. The scalability of this design, here implemented for lasing in the near‐infrared, enables large‐aperture ultra‐thin coherent light sources with controllable emission from the infrared to the visible.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dark and Bright Excitons in Halide Perovskite Nanoplatelets

Semiconductor nanoplatelets (NPLs), with their large exciton binding energy, narrow photoluminescence (PL), and absence of dielectric screening for photons emitted normal to the NPL surface, could be expected to become the fastest luminophores amongst all colloidal nanostructures. However, super-fast emission is suppressed by a dark (optically passive) exciton ground state, substantially split from a higher-lying bright (optically active) state. Here, the exciton fine structure in 2-8 monolayer (ML) thick Cs n - 1 Pb n Br 3n + 1 NPLs is revealed by merging temperature-resolved PL spectra and time-resolved PL decay with an effective mass model taking quantum confinement and dielectric confinement anisotropy into account. This approach exposes a thickness-dependent bright-dark exciton splitting reaching 32.3 meV for the 2 ML NPLs. The model also reveals a 5-16 meV splitting of the bright exciton states with transition dipoles polarized parallel and perpendicular to the NPL surfaces, the order of which is reversed for the thinnest NPLs, as confirmed by TR-PL measurements. Accordingly, the individual bright states must be taken into account, while the dark exciton state strongly affects the optical properties of the thinnest NPLs even at room temperature. Significantly, the derived model can be generalized for any isotropically or anisotropically confined nanostructure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimizing Piezoelectric Nanocomposites by High‐Throughput Phase‐Field Simulation and Machine Learning

Abstract Piezoelectric nanocomposites with oxide fillers in a polymer matrix combine the merit of high piezoelectric response of the oxides and flexibility as well as biocompatibility of the polymers. Understanding the role of the choice of materials and the filler‐matrix architecture is critical to achieving desired functionality of a composite towards applications in flexible electronics and energy harvest devices. Herein, a high‐throughput phase‐field simulation is conducted to systematically reveal the influence of morphology and spatial orientation of an oxide filler on the piezoelectric, mechanical, and dielectric properties of the piezoelectric nanocomposites. It is discovered that with a constant filler volume fraction, a composite composed of vertical pillars exhibits superior piezoelectric response and electromechanical coupling coefficient as compared to the other geometric configurations. An analytical regression is established from a linear regression‐based machine learning model, which can be employed to predict the performance of nanocomposites filled with oxides with a given set of piezoelectric coefficient, dielectric permittivity, and stiffness. This work not only sheds light on the fundamental mechanism of piezoelectric nanocomposites, but also offers a promising material design strategy for developing high‐performance polymer/inorganic oxide composite‐based wearable electronics.

42 ENGINEERING↗
DOE OSTI2024

Electronic Properties of Ultra‐Wide Bandgap B x Al 1− x N Computed from First‐Principles Simulations

Abstract Ultra‐wide bandgap (UWBG) materials such as AlN and BN hold great promise for future power electronics due to their exceptional properties. They exhibit large bandgaps, high breakdown fields, high thermal conductivity, and high mechanical strengths. AlN and BN have been extensively researched, however, their alloys, B x Al 1− x N, are much less studied despite their ability to offer tunable properties by adjusting x . In this article, the electronic properties of 17 recently predicted ground states of B x Al 1− x N in the x = 0 − 1 range are predicted using first‐principles density functional theory and many‐body perturbation theory within GW approximation. All the B x Al 1− x N structures are found to be UWBG materials and have bandgaps that vary linearly from that of wurtzite‐phase ( w ) AlN (6.19 eV) to that of w ‐BN (7.47 eV). The bandstructures of B x Al 1− x N show that a direct‐to‐indirect bandgap crossover occurs near x = 0.25. Furthermore, it is found that B x Al 1− x N alloys have much larger dielectric constants than the constituent bulk materials (AlN = 9.3 ɛ 0 or BN = 7.3 ɛ 0 ), with values reaching as high as 12.1 ɛ 0 . These alloys are found to exhibit large dielectric breakdown fields in the range 9–35 MV cm −1 with a linear dependence on x . This work provides the much needed advancement in the understanding of the properties of B x Al 1− x N to aid their application in next‐generation devices.

Milne, Cody L.↗
DOE OSTI2024

Enhanced UV–Vis Rejection Ratio in Metal/BaTiO 3 /β–Ga 2 O 3 Solar–Blind Photodetectors

The fabrication and characterization of metal/BaTiO 3 /β-Ga 2 O 3 solar-blind photodetectors are reported. β-Ga 2 O 3 is a promising material for solar-blind photodetectors due to its large bandgap and the availability of low defect-density melt-grown substrates. In this work, structures are introduced that employ high-permittivity dielectric/semiconductor heterojunctions to enhance the performance of a Schottky photodetector. It is shown that integrating the high-k dielectric BaTiO 3 reduces the dark current by ≈10 4 , all but eliminates illumination induced Schottky barrier lowering, and increases the UV–vis rejection ratio by a factor greater than 9 × 10 3 compared to a Schottky photodetector. It is hypothesized that the high permittivity of the dielectric overcomes the influence of self-trapped holes in Ga 2 O 3 to reduce the peak electric field at the dielectric/metal interface, thereby eliminating the effects of Schottky barrier lowering on illuminated β-Ga 2 O 3 photodetectors. Additionally, it is hypothesized that the increase in the UV–vis rejection ratio is caused by the “dead layer” that forms at the BaTiO 3 /Pt interface.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exciton Binding Energy in Organic Polymers: Experimental Considerations and Tuning Prospects

Discrepancies in reported values of exciton binding energy (E b ) for organic semiconductors (OSs) necessitate a comprehensive study. Traditionally, E b is defined as the difference between the transport gap (E t ) and the optical gap (E opt ). Here, the E b values of PBnDT‐TAZ polymer variants are determined using two commonly employed methods: a combination of ultraviolet photoemission spectroscopy and low‐energy inverse photoemission spectroscopy (UPS‐LEIPS) and solid‐state cyclic voltammetry (CV). E b values obtained by UPS‐LEIPS show low dispersion and no clear correlation with the polymer structure and thedielectric properties. In contrast, CV reveals a larger dispersion (200 meV‐1 eV) and an apparent qualitative E b ‐molecular structure correlation, as the lowest E b values are observed for oligo‐ethylene glycol side chains. This discrepancy is discussed by examining the implications of the traditional definition of E b . Additionally, the impact of both intrinsic and extrinsic factors contributing to the derived experimental values of E t is discussed. The differences in intrinsic and extrinsic factors highlight the context‐dependent nature of measurement when drawing global conclusions. Notably, the observed E b trend derived from CV is not intrinsic to the pure materials but likely linked to electrolyte swelling and associated changes in dielectric environment, suggesting that high‐efficiency single‐material organic photovoltaics with low E b may be possible via high dielectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Modeling of Radiative Emission from Shallow Color Centers in Single Crystalline Diamond

Optically active defects in diamond are widely used as bright single-photon sources for quantum sensing, computing, and communication. For many applications, it is useful to place the emitter close to the diamond surface, where the radiative properties of the emitter are strongly modified by its dielectric environment. It is well-known that the radiative power from an electric dipole decreases as the emitter approaches an interface with a lower-index dielectric, leading to an increase in the radiative lifetime. For emitters in crystalline solids, modeling of this effect needs to take into account the crystal orientation and direction of the surface cut, which can greatly impact the emission characteristics. In this paper, a framework for analyzing the emission rates of shallow (<100 nm) defects is provided, in which optical transitions are derived from electric dipoles in a plane perpendicular to their spin axis. The calculations for the depth-dependent radiative lifetime for color centers in (100)-, (110)-, and (111)-cut diamond are presented, which can be extended to other vacancy defects in diamond.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Hybrid of multi‐dimensional fillers for thermally enhanced polyamide 12 composites fabricated by selective laser sintering

Abstract Selective laser sintering (SLS) is an additive manufacturing technology that can provide a novel strategy to manufacture complex polymer‐based composites with tailored properties. In this study, polyamide 12 (PA12) composite powders based on Al 2 O 3 , boron nitride (BN), and carbon nanotubes (CNTs) were prepared via a two‐step mixing approach. Morphology characterization techniques indicated that the fillers were uniformly dispersed in the PA12 matrix as expected. Under the optimum 3D‐printing parameters, the fabrication of SLS parts with high filler loading could be obtained. With 40 wt% Al 2 O 3 , 8 wt% BN, and 2 wt% CNT hybrid fillers, the thermal conductivity of PA12 composites could reach 1.09 W/mK. It could be attributed to the synergistic effect of multi‐dimensional fillers to form dense and continuous thermal conduction paths. The factors influencing the performance of PA12 composites such as melting and crystallization behaviors, dielectric properties, and mechanical properties were also discussed. The results show that these composites have favorable dielectric and mechanical properties. Overall, the PA12 composites fabricated by SLS technology in this study exhibit excellent thermal management ability.

Yuan, Yue↗
DOE OSTI2025

A Spatially Resolved Evaluation of Accelerated Environmental Aging on Emerging Polypropylene-Based Photovoltaic Backsheets Using Raman Spectroscopy

For this work, accelerated aging was used to assess environmental degradation in emerging co-extruded polypropylene (PP)-based backsheets under three different environmental conditions (65°C/20% relative humidity (RH), 75°C/20% RH, and 75°C/50% RH). Although differential scanning calorimetry did not measure crystallinity changes with exposure, spatially resolved Raman spectroscopy identified crystallinity increases in the core layer of aged samples, indicating a heterogeneous postcrystallization process. The Raman results were in agreement with synchrotron-based microfocused wide-angle X-ray scattering measurements. Cross-sectional nanoindentation was used to correlate localized crystallinity shifts with changes in Young's modulus. A similar trend was found where increased modulus was measured in the core layer, supporting the relationship between modulus and crystallinity. Finally, dielectric characterization was used to assess the impact of these material property changes on performance. While changes in the backsheet material properties and dielectric performance were observed with accelerated aging, these shifts generally equilibrated with time, indicating overall stability in response to environmental stressors. Additionally, the identified heterogeneous material property changes indicate that spatially resolved crystallinity measurements may be a valuable early failure indicator to be used in the assessment of PV backsheet long-term durability.

36 MATERIALS SCIENCE↗