Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Quantum mechanical closure of partial differential equations with symmetries

We develop a statistical framework for the dynamical closure of spatiotemporal dynamics governed by partial differential equations. Employing the mathematical framework of quantum mechanics to embed the original classical dynamics into a quantum mechanical representation, we use the space of quantum density operators to model the unresolved degrees of freedom of the original dynamics in a statistical sense, and the framework of quantum measurement to predict their contributions to the resolved dynamics. The embedded dynamics is discretized by a positivity preserving process, leading to a compressed representation that is invariant under the dynamical symmetries of the resolved dynamics. We present a data based formulation of the closure scheme and apply it to a closure problem for the shallow water equations. The numerical results demonstrate that our closure model can accurately predict the main features of the true dynamics, including for out of sample initial conditions.

Delay embedding↗
DOE OSTI2021

The u 3 si 2 -H system

U 3 Si 2 is of interest to the nuclear industry as a candidate fuel material due to its high uranium density and high thermal conductivity. However, it has been observed to react with hydrogen, resulting in material decrepitation. As a result, it is important to understand the thermodynamics of the U 3 Si 2 -H system. In this study, the thermodynamics of the hydrogen absorption reaction of USi were determined experimentally using Sievert’s gas absorption and related to crystallographic evolution with hydrogen content using X-ray diffraction. Experimentally-determined thermodynamic parameters were compared with results from density functional theory modeling. Results from this study were also compared with those determined in previous work. Sievert’s gas absorption results were used to develop the pressure-composition-temperature (PCT) curves of the U 3 Si 2 -H system. It was found that the hydride phase exhibited a maximum stoichiometry between U 3 Si 2 H 1.8 and U 3 Si 2 H 2 . The two-phase region for hydride formation from U 3 Si 2 exhibited a miscibility gap with a critical temperature between 623 and 673 K, as calculated from the PCT curves. Analysis of the PCT curves also showed that both the enthalpy and entropy of the hydrogen absorption reaction increased with hydrogen content but were lower than the values for uranium trihydride formation from uranium metal. The enthalpy of reaction for hydrogen absorption was calculated to range between -86.9 and -94.8 kJ mol -1 , while the entropy of reaction was calculated to range between 101.9 and 138.8 J mol -1 K -1 . Furthermore, DFT modeling of the thermoydnamic stability of the USi hydride phases yielded a decomposition temperature of U 3 Si 2 H 2 of approximately 600 K, which was consistent with the experimental results. Similarly, the DFT-calculated enthalpy and entropy of reaction to form USiH were determined to be -106.5kJ mol and 121.8J mol -1 K -1 , respectively, which were both in close agreement with the experimentally-determined values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Unlocking enhanced gas capture via core scrambling of porous-organic cages

The demand for low-cost, low-energy, and highly selective gas capture and separations is an ongoing driver of porous material development. Porous liquids have been identified as a promising gas separation material by creating permanent porosity in inorganic solvents through inclusion of nanoporous materials that sterically exclude solvent from their internal porosity. Among the nanoporous materials that can be used to form porous liquids, porous-organic cages (POCs) have been one of the most popular due to the inherent tunability of POCs. “Scrambled” POCs with varying functionalities on the POC vertices have been developed and incorporated into porous liquid compositions, increasing their gas adsorption capacity. An unexplored avenue to tailor the properties of porous liquids is through scrambling the functionality of the core of the POC. Here, therefore, we have synthesized a new POC, a CC3-OH derivative with scrambled hydroxides on the core and evaluated the impact on the CO 2 uptake capacity in silicon oil-based porous liquids. Core scrambling of the POC resulted in a twofold increase CO 2 adsorption capacity in the porous liquid, an emergent property that is a dramatic increase beyond a linear combination of the gas adsorption capacity of the neat solvent and the POC. Density functional theory modeling of the CC3 POC and its hydroxide-based derivatives identified that free rotation of the linker hydroxide allowed for forced interaction between the CO 2 molecule and the hydroxide in the pore window. Solvation of the POC may release scrambled core hydroxides from intramolecular bonding with a neighboring imine, allowing for increased gas uptake in the porous liquid over the neat POC. These results identify a key structural relationship of POCs that enables emergent properties in porous liquids and can guide future development of liquid phase gas capture and separation materials for environmental and industrial applications.

Gas capture↗
DOE OSTI2015

Impact compaction of a granular material

The dynamic behavior of granular materials has importance to a variety of engineering applications. Structural seismic coupling, planetary science, and earth penetration mechanics, are just a few of the application areas. Although the mechanical behavior of granular materials of various types have been studied extensively for several decades, the dynamic behavior of such materials remains poorly understood. High-quality experimental data are needed to improve our general understanding of granular material compaction physics. This study will describe how an instrumented plunger impact system can be used to measure pressure-density relationships for model materials at high and controlled strain rates and subsequently used for computational modeling.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Atomic layer deposition in a metal–organic framework: Synthesis, characterization, and performance of a solid acid

NU-1000, a zirconium-based metal-organic framework featuring mesoporous channels, has been post-synthetically metalated via atomic layer deposition in MOF (AIM) employing dimethylaluminum iso-propoxide ([AlMe 2 i OPr] 2 – DMAI), a milder precursor than widely used trimethylaluminum (AlMe 3 - TMA). The aluminum-modified NU-1000 (Al-NU-1000) has been characterized with a comprehensive suite of techniques that points to the formation of aluminum oxide clusters well dispersed through the framework and stabilized by confinement within small pores intrinsic to the NU-1000 structure. Experimental evidence allows for identification of spectroscopic similarities between Al-NU-1000 and γ-Al 2 O 3 . Density functional theory modeling provides structures and simulated spectra the relevance of which can be assessed via comparison to experimental IR and EXAFS data. As a result, the catalytic performance of Al-NU-1000 has been benchmarked against γ-Al 2 O 3 , with promising results in terms of selectivity.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Exploring the Rich Potential Energy Surface of (H 2 O) 11 and Its Physical Implications

The rich potential energy surface of the water undecamer (H 2 O) 11 was explored with a basin hopping algorithm using a TIP 4 P potential and other methods followed by extensive ab initio MP2 minimizations and CCSD(T) corrections. This protocol yielded 17, 66, and 125 distinct isomers within 0.5, 1.0, and 2.0 kcal mol –1 of the complete basis set CCSD(T) global minimum, respectively. These isomers were categorized into 15 different families based on their oxygen framework and hydrogen bonding topology. Determination of the global minimum proved challenging because of the presence of many nearly isoenergetic isomers. The predicted global minimum varied among ab initio methods, density functionals, and model potentials, and it was sensitive to the choice of energy extrapolation schemes, higher-order CCSD(T) corrections, and inclusion of zero-point vibrational energy. In conclusion, the presence of a large number of nearly degenerate structures and the isomerization between them has manifested itself in the anomalous broadening of the heat capacity curve of the undecamer in simulations around the melting region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Molecular Structure of Sphingomyelin in Fluid Phase Bilayers Determined by the Joint Analysis of Small-Angle Neutron and X-ray Scattering Data

In this work, we have determined the fluid bilayer structure of palmitoyl sphingomyelin (PSM) and stearoyl sphingomyelin (SSM) by simultaneously analyzing small-angle neutron and X-ray scattering data. Using a newly developed scattering density profile (SDP) model for sphingomyelin lipids, we report structural parameters including the area per lipid, total bilayer thickness, and hydrocarbon thickness, in addition to lipid volumes determined by densitometry. Unconstrained all-atom simulations of PSM bilayers at 55 °C using the C36 CHARMM force field produced a lipid area of 56 Å 2 , a value that is 10% lower than the one determined experimentally by SDP analysis (61.9 Å2). Furthermore, scattering form factors calculated from the unconstrained simulations were in poor agreement with experimental form factors, even though segmental order parameter (S CD ) profiles calculated from the simulations were in relatively good agreement with S CD profiles obtained from NMR experiments. Conversely, constrained area simulations at 61.9 Å 2 resulted in good agreement between the simulation and experimental scattering form factors, but not with S CD profiles from NMR. We discuss possible reasons for the discrepancies between these two types of data that are frequently used as validation metrics for molecular dynamics force fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Atomic-Scale View of Redox Induced Changes for Monolayer MoO x on α-TiO 2 (110) with Chemical-State Sensitivity

Supported molybdenum oxide (MoO x ) plays an important role in catalytic transformations from alcohol dehydrogenation to transesterification. During these reactions, Mo and oxygen surface species undergo structural and chemical changes. A detailed, chemical-state specific, atomic-scale structural analysis of the catalyst under redox conditions is important for improving catalytic properties. In this study, monolayer of MoO x grown on α-TiO 2 (110) by atomic-layer deposition is analyzed by X-ray standing wave (XSW) excited X-ray photoelectron spectroscopy (XPS). The chemical shifts for Mo 2p 3/2 and O 1s peaks are used to distinguish Mo 6+ from Mo 4+ and surface O from bulk O. Excitation of XPS by XSW allows pin-pointing the location of these surface species relative to the underlying substrate lattice. Finally, measured 3D composite atomic density maps for the oxidized and reduced interfaces compare well with our density functional theory models, and collectively create a unique view of the redoxdriven dynamics for this complex catalytic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Self-Inhibition Phenomena in Cu 3 Pt Oxidation by CO 2

Here, this study investigates the oxidation behavior of Cu 3 Pt(100) in CO 2 using a combination of ambient-pressure X-ray photoelectron spectroscopy, mass spectroscopy, and density functional theory modeling. Our in situ measurements reveal the simultaneous oxidation and reduction of Cu 2 O due to the opposing effects of atomic oxygen and CO generated from dissociative CO 2 adsorption, leading to a dynamic equilibrium state of simultaneously occurring redox reactions. Complementary atomistic calculations elucidate the inhibitory effects of subsurface Pt enrichment and the counteracting roles of CO 2 and CO in surface oxidation and reduction. These results provide mechanistic insights into the dissociative pathway of CO 2 molecules and dynamic evolution of surface composition and reactivity of Cu-based alloy catalysts in CO 2 -rich environments, with broader implications for tuning gas–surface reactions by manipulating gas reactants or solid surface composition.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Interplay of Bias-Driven Charging and the Vibrational Stark Effect in Molecular Junctions

We observe large, reversible, bias driven changes in the vibrational energies of PCBM based on simultaneous transport and surface-enhanced Raman spectroscopy (SERS) measurements on PCBM-gold junctions. A combination of linear and quadratic shifts in vibrational energies with voltage is analyzed and compared with similar measurements involving C-60-gold junctions. A theoretical model based on density functional theory (DFT) calculations suggests that both a vibrational Stark effect and bias-induced charging of the junction contribute to the shifts in vibrational energies. In the PCBM case, a linear vibrational Stark effect is observed due to the permanent electric dipole moment of PCBM. The vibrational Stark shifts shown here for PCBM junctions are comparable to or larger than the charging effects that dominate in C-60 junctions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

First-Principles Study on the Role of Cu and Cl-Based Dopants in NiO

Utilization of wide band gap oxide-based materials in thin-film solar energy technologies has increased in recent years. Among the numerous candidate oxide materials, NiO has shown many desirable optoelectronic properties that are applicable to thin-film PV technologies such as cadmium telluride PV. However, one critical factor requiring further investigation is the p-type doping behavior of NiO, specifically when the cadmium telluride solar cell undergoes conventional processes such as copper doping and chlorine-based activation treatment. The previous literature has shown a large degree of variability in hole concentrations in NiO when copper is used as the primary dopant. This study uses first-principles computational modeling based on density functional theory coupled with defect equilibria calculations to quantitatively explore the role of copper and chlorine-based extrinsic dopants in the p-type doping activity of NiO. The study reveals the importance of extrinsic dopants and their binding interactions with nickel vacancies to effectively p-dope NiO. It is suggested that both the formation of V Ni + Cu Ni and V Ni + Cl O defect pairs under a supersaturated state of NiO are potential mechanisms for increasing hole densities. On the other hand, the production of 2Cu Ni severely limits the effectiveness of p-doping in NiO, even in the presence of the aforementioned defect pairs. Furthermore, the study provides a guideline for experimentalists interested in using copper or chlorine species to understand how to controllably p-dope NiO during thin-film synthesis.

chlorine↗
DOE OSTI2020

Two-Dimensional Conductive Ni-HAB as a Catalyst for the Electrochemical Oxygen Reduction Reaction

Catalytic systems whose properties can be systematically tuned via changes in synthesis conditions are highly desirable for the next-generation catalyst design and optimization. Herein, we present a two-dimensional (2D) conductive metal–organic framework consisting of M-N 4 units (M = Ni, Cu) and a hexaaminobenzene (HAB) linker as a catalyst for the oxygen reduction reaction. By varying synthetic conditions, we prepared two Ni-HAB catalysts with different crystallinities, resulting in catalytic systems with different electric conductivities, electrochemical activity, and stability. We show that crystallinity has a positive impact on conductivity and demonstrate that this improved crystallinity/conductivity improves the catalytic performance of our model system. Additionally, density functional theory simulations were performed to probe the origin of M-HAB’s catalytic activity, and they suggest that M-HAB’s organic linker acts as the active site with the role of the metal being to modulate the linker sites’ binding strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

PdCu Nanoalloy Electrocatalysts in Oxygen Reduction Reaction: Role of Composition and Phase State in Catalytic Synergy

The catalytic synergy of nanoalloy catalysts depends on the nanoscale size, composition, phase state, and surface properties. This report describes findings of an investigation of their roles in the enhancement of electrocatalytic activity of PdCu alloy nanoparticle catalysts for oxygen reduction reaction (ORR). In this work Pd n Cu 100–n nanoalloys with controlled composition and subtle differences in size and phase state were synthesized by two different wet chemical methods. Detailed electrochemical characterization was performed to determine the surface properties and the catalytic activities. The atomic-scale structures of these catalysts were also characterized by high-energy synchrotron X-ray diffraction coupled with atomic pair distribution function analysis. The electrocatalytic activity and stability were shown to depend on the size, composition, and phase structure. With Pd n Cu 100–n catalysts from both methods, a maximum ORR activity was revealed at Pd/Cu ratio close to 50:50. Structurally, Pd 50 Cu 50 nanoalloys feature a mixed phase consisting of chemically ordered (body-centered cubic type) and disordered (face-centered cubic type) domains. The phase-segregated structure is shown to change to a single phase upon electrochemical potential cycling in ORR condition. While the surface Cu dissolution occurred in PdCu catalysts from the two different synthesis methods, the PdCu with a singlephase character is found to exhibit a tendency of a much greater dissolution than that with the phase segregation. Analysis of the results, along theoretical modeling based on density functional theory calculation, has provided new insights for the correlation between the electrocatalytic activity and the catalyst structures.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Beating Heterogeneity of Single-Site Catalysts: MgO-Supported Iridium Complexes

Catalysts consisting of isolated metal atoms on oxide supports have attracted wide attention because they offer unique catalytic properties, but their structures remain largely unknown because the metals are bonded at various, heterogeneous surface sites. Now, by using highly crystalline MgO as a support for metal sites made from a mononuclear organoiridium precursor and investigating the surface species with X-ray absorption spectroscopy, atomic resolution electron microscopy, and electronic structure theory, we have differentiated among the MgO surface sites for iridium bonding. The results demonstrate the contrasting structures and catalytic properties of samples, even including those incorporating iridium at loadings as low as 0.01 wt % and showing that the latter are nearly ideal in the sense of having almost all the Ir atoms at equivalent surface sites, with each Ir atom bonded to three oxygen atoms of the MgO surface. These supported molecular catalysts are modeled accurately with density functional theory. The results open the door to the precise synthesis of families of single-site catalysts. The work was supported by the U.S. Department of Energy (DOE), Office of Science (SC), Basic Energy Sciences (BES), Grant DE-FG02-04ER15513 and the DOE BES Catalysis Center Program by a subcontract from Pacific Northwest National Laboratory (KC0301050-47319) to the University of Alabama. We thank Chevron for fellowship support of ASH and LMD. DAD thanks the Robert Ramsay Chair Fund of The University of Alabama for support. A portion of the research was performed using facilities of the Environmental Molecular Sciences Laboratory (Ringgold ID 130367), a DOE SC User Facility sponsored by the Office of Biological and Environmental Research. Use of the Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, is supported by DOE SC BES under Contract No. DE-AC02- 76SF00515. We thank Chevron Energy Technology Company for performing the XRD experiments.

single-site catalyst, iridium catalyst, MgO-suppor↗
DOE OSTI2018

Revealing the Role of Phase Structures of Bimetallic Nanocatalysts in the Oxygen Reduction Reaction

The ability to tune the atomic-level structure of alloy nanoparticles (NPs) is necessary for the design and preparation of active and stable catalysts for fuel cell reactions such as the oxygen reduction reaction (ORR), which is highly sensitive to the structure of the catalysts. We report here structurally tunable PdCu nanoparticle catalysts for the ORR obtained by varying the thermochemical treatment parameters. The phase type and the atomic structure of the nanoalloy catalysts strongly depend on the thermochemical treatment temperature and atmosphere, especially at low temperatures. While PdCu nanoalloys feature both body-centered cubic (bcc) and face-centered cubic (fcc) phase structures, a pure fcc structure, prepared by unusually low thermochemical treatment temperature, showed the highest catalytic activity for ORR. This was evidenced by a mass activity of eight times higher than that of commercial Pd catalyst. This activity enhancement was shown to be linked to the nanostructural tuning between fcc and bcc structures, as supported by systematic characterization using X-ray diffraction coupled with pair distribution function analysis. The impact of phase structure on the catalytic properties of the nanocatalyst is further substantiated by computational modeling based on density functional theory. Our results provide a fresh insight into the nanostructure-activity correlation at the atomic scale, which has significant implications for the design, synthesis, and processing of highly-active nanoalloy catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Mechanisms of Two-Electron and Four-Electron Electrochemical Oxygen Reduction Reactions at Nitrogen-Doped Reduced Graphene Oxide

Doped carbon-based systems have been extensively studied over the past decade as active electrocatalysts for both the two-electron (2e – ) and four-electron (4e – ) oxygen reduction reactions (ORRs). However, the mechanisms for ORR are generally poorly understood. Here, we report an extensive experimental and first-principles theoretical study of the ORR at nitrogen-doped reduced graphene oxide (NrGO). We synthesize three distinct NrGO catalysts and investigate their chemical and structural properties in detail via X-ray photoelectron spectroscopy, infrared and Raman spectroscopies, high-resolution transmission electron microscopy, and thin-film electrical conductivity. ORR experiments include the pH dependences of 2e – versus 4e – ORR selectivity, ORR onset potentials, Tafel slopes, and H/D kinetic isotope effects. These experiments show very different ORR behavior for the three catalysts, in terms of both selectivity and the underlying mechanism, which proceeds either via coupled proton–electron transfers (CPETs) or non-CPETs. Reasonable structural models developed from density functional theory rationalize this behavior. The key determinant between CPET vs non-CPET mechanisms is the electron density at the Fermi level under operating ORR conditions. Regardless of the reaction mechanism or electrolyte pH, however, we identify the ORR active sites as sp 2 carbons that are located next to oxide regions. This assignment highlights the importance of oxygen functional groups, while details of (modest) N-doping may still affect the overall catalytic activity, and likely also the selectivity, by modifying the general chemical environment around the active site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Chiral Graphene Quantum Dots

Chiral nanostructures from metals and semiconductors attract wide interest as components for polarization-enabled optoelectronic devices. Similarly to other fields of nanotechnology, graphene-based materials can greatly enrich physical and chemical phenomena associated with optical and electronic properties of chiral nanostructures and facilitate their applications in biology as well as other areas. Here, we report that covalent attachment of l/d-cysteine moieties to the edges of graphene quantum dots (GQDs) leads to their helical buckling due to chiral interactions at the “crowded” edges. Circular dichroism (CD) spectra of the GQDs revealed bands at ca. 210–220 and 250–265 nm that changed their signs for different chirality of the cysteine edge ligands. The high-energy chiroptical peaks at 210–220 nm correspond to the hybridized molecular orbitals involving the chiral center of amino acids and atoms of graphene edges. Diverse experimental and modeling data, including density functional theory calculations of CD spectra with probabilistic distribution of GQD isomers, indicate that the band at 250–265 nm originates from the three-dimensional twisting of the graphene sheet and can be attributed to the chiral excitonic transitions. The positive and negative low-energy CD bands correspond to the left and right helicity of GQDs, respectively. Exposure of liver HepG2 cells to l/d-GQDs reveals their general biocompatibility and a noticeable difference in the toxicity of the stereoisomers. Molecular dynamics simulations demonstrated that d-GQDs have a stronger tendency to accumulate within the cellular membrane than l-GQDs. Finally, emergence of nanoscale chirality in GQDs decorated with biomolecules is expected to be a general stereochemical phenomenon for flexible sheets of nanomaterials.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Nanoscale π–π stacked molecules are bound by collective charge fluctuations

Non-covalent π-π interactions are central to chemical and biological processes, yet the full understanding of their origin that would unite the simplicity of empirical approaches with the accuracy of quantum calculations is still missing. Here we employ a quantum-mechanical Hamiltonian model for van der Waals interactions, to demonstrate that intermolecular electron correlation in large supramolecular complexes at equilibrium distances is appropriately described by collective charge fluctuations. We visualize these fluctuations and provide connections both to orbital-based approaches to electron correlation, as well as to the simple London pairwise picture. The reported binding energies of ten supramolecular complexes obtained from the quantum-mechanical fluctuation model joined with density functional calculations are within 5% of the reference energies calculated with the diffusion quantum Monte-Carlo method. Our analysis suggests that π-π stacking in supramolecular complexes can be characterized by strong contributions to the binding energy from delocalized, collective charge fluctuations—in contrast to complexes with other types of bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗