Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORK CAPACITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Construction of ultrathin N-doped carbon shell on LiFePO{sub 4} spheres as enhanced cathode for lithium ion batteries

Graphical abstract: N-doped carbon (N-C) coated LiFePO{sub 4} spheres have been prepared by a facile one-step spray drying method and demonstrated with high capacity and good cycling life as cathode of lithium ion batteries. - Highlights: • Construct N-C shell on LiFePO{sub 4} as enhanced cathode for LIBs. • LiFePO{sub 4}/N-C cathodes show high capacity and good cycling life. • N-C shell structure is favorable for fast electron transfer. - Abstract: Developing advanced cathode is playing a crucial role in the advancement of lithium ion batteries (LIBs). In this work, we report a novel one-step spray drying method for fabrication of N-doped carbon (N-C) coated LiFePO{sub 4} spheres forming LiFePO{sub 4}/N-C spheres composite. Thin N-C layer of about 5 nm was coating on the surface of LiFePO{sub 4} spheres. The electrochemical properties of LiFePO{sub 4}/N-C spheres composite have been thoroughly studied as cathode of LIBs. The LiFePO{sub 4}/N-C spheres composite delivers discharge capacities of 160, 143 and 115 mAh g{sup −1} at 1 C, 5 C and 20 C, respectively, much better than unmodified LiFePO{sub 4} cathode. A high discharge capacity of 159 mAh g{sup −1} is preserved with 99% capacity retention after 1000 cycles at 1 C. The enhanced performance is due to the introduction of N-C shell with improved electrical conductivity and structural stability.

36 MATERIALS SCIENCE↗

Classical and quantum correlative capacities of quantum systems

How strongly can one system be correlated with another? In the classical world, this basic question concerning correlative capacity has a very satisfying answer: The ''effective size'' of the marginal system, as quantified by the Shannon entropy, sets a tight upper bound to the correlations, as quantified by the mutual information. Although in the quantum world bipartite correlations, like their classical counterparts, are also well quantified by mutual information, the similarity ends here: The correlations in a bipartite quantum system can be twice as large as the marginal entropy. In the paradigm of quantum discord, the correlations are split into classical and quantum components, and it was conjectured that both the classical and quantum correlations are (like the classical mutual information) bounded above by each subsystem's entropy. In this work, by exploiting the interplay between entanglement of formation, mutual information, and quantum discord, we disprove that conjecture. We further indicate a scheme to restore harmony between quantum and classical correlative capacities. The results illustrate dramatically the asymmetric nature of quantum discord and highlight some subtle and unusual features of quantum correlations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An organic bifunctional redox active material for symmetric aqueous redox flow battery

Symmetric redox flow batteries utilizing a single redox active material as catholyte and anolyte, offer a plausible and unique strategy to alleviate cross-contamination issues during cycling, making them an ideal energy storage device for large scale applications. In this work, a low-cost riboflavin organic molecule is coupled with a 2,2,6,6-Tetramethylpiperidinyl-N-oxyl (TEMPO) radical molecule to form a single Riboflavin-TEMPO (RIBOTEMPO) bifunctional redox active material, which is used in both aqueous anolyte and catholyte. Cyclic voltammetry analysis of the combined molecule displays electrochemically reversible reactions for the redox couples at 0.72 V and 0.51 V versus Hg/Hg2SO4, leading to a theoretical cell voltage of 1.23 V. A symmetric cell testing demonstrated over 100 consecutive charge/discharge cycles with nearly 80% coulombic efficiency and capacity retention of 44.7% at a current density of 2.5 mA cm(-2). By utilizing a pH neutral supporting electrolyte, a lowcost, safe, and environmental-friendly redox flow battery is achieved. This work provides a pathway for the design and development of bifunctional redox active molecules for symmetric battery applications.

25 ENERGY STORAGE↗

Definition of Redox Centers in Reactions of Lithium Intercalation in Li 3 RuO 4 Polymorphs

Cathodes based on layered LiMO 2 are the limiting components in the path toward Li-ion batteries with energy densities suitable for electric vehicles. Introducing an over-stoichiometry of Li increases storage capacity beyond a conventional mechanism of formal transition metal redox. However, the role and fate of the oxide ligands in such intriguing additional capacity remain unclear. This reactivity was predicted in Li 3 RuO 4 , making it a valuable model system. For this study, a comprehensive analysis of the redox activity of both Ru and O under different electrochemical conditions was carried out, and the effect of Li/Ru ordering was evaluated. Li 3 RuO 4 displays highly reversible Li intercalation to Li 4 RuO 4 below 2.5 V vs Li + /Li 0 , with conventional reactivity through the formal Ru 5+ -Ru 4+ couple. In turn, it can also undergo anodic Li extraction at 3.9 V, which involves O states to a much greater extent than Ru. This reaction competes with side processes such as electrolyte decomposition and, to a much lesser extent, oxygen loss. Although the associated capacity is reversible, reintercalation unlocks a different, conventional pathway also involving the formal Ru 5+ -Ru 4+ couple despite operating above 2.5 V, leading to chemical hysteresis. This new pathway is both chemically and electrochemically reversible in subsequent cycles. This work exemplifies both the challenge of stabilizing highly depleted O states, even with 4d metals, and the ability of solids to access the same redox couple at two very different potential windows depending on the underlying structural changes. It highlights the importance of properly defining the covalency of oxides when defining charge compensation in view of the design of materials with high capacity for Li storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NA-22 Quarterly Report: April-June, 2020

At LLNL we contribute to two projects in NNSA-IAEC Science and Technology Working Group Area V: Basic Science of Waste Management & Subsurface Science. The motivation behind Topic Area V is to evaluate the scientific and safety case for an intermediate borehole to house Israel’s nuclear waste. WM1 (SNL lead) is Thermomechanical Damage (initially called Damage Accumulation and Wellbore Stability). This work focuses on evaluating the damage to the host rock induced by excavation and heat released from a possible radioactive waste repository/borehole. WM2 (LLNL lead) is Radionuclide Facilitated Transport in Carbonate Rock (initially called Colloidal Transport of Radionuclides). This work focuses on better understanding the transport of radionuclides and colloids from a nuclear waste repository/borehole in a vadose zone environment through experimentation and modeling. In the second quarter (this report) our work has been delayed in part due to COVID-19. LLNL went into shelter in place (SIP), minimum safe operations mid-March. Operations at LLNL have been slowly ramping up with 50% of the workforce back onsite in limited capacity and telecommuting widely used. The good news is that our labs opened up the last week in June and experiments are expected to start up again for WM2 Radionuclide Facilitated Transport in July. LLNL’s contribution to WM1 Thermochemical Damage modeling efforts also started back up in late June. We expect to be able to catch up on much of our work by the end of next quarter. The three national laboratories communication on a bi-monthly basis to make sure Area V projects remain on track and we have a monthly conference call with our Israeli counterparts to make sure we are communicating priorities and coordinating project details.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

NA-22 Quarterly Report: April-June, 2020

At LLNL we contribute to two projects in NNSA-IAEC Science and Technology Working Group Area V: Basic Science of Waste Management & Subsurface Science. The motivation behind Topic Area V is to evaluate the scientific and safety case for an intermediate borehole to house Israel’s nuclear waste. WM1 (SNL lead) is Thermomechanical Damage (initially called Damage Accumulation and Wellbore Stability). This work focuses on evaluating the damage to the host rock induced by excavation and heat released from a possible radioactive waste repository/borehole. WM2 (LLNL lead) is Radionuclide Facilitated Transport in Carbonate Rock (initially called Colloidal Transport of Radionuclides). This work focuses on better understanding the transport of radionuclides and colloids from a nuclear waste repository/borehole in a vadose zone environment through experimentation and modeling. In the second quarter (this report) our work has been delayed in part due to COVID-19. LLNL went into shelter in place (SIP), minimum safe operations mid-March. Operations at LLNL have been slowly ramping up with 50% of the workforce back onsite in limited capacity and telecommuting widely used. The good news is that our labs opened up the last week in June and experiments are expected to start up again for WM2 Radionuclide Facilitated Transport in July. LLNL’s contribution to WM1 Thermochemical Damage modeling efforts also started back up in late June. We expect to be able to catch up on much of our work by the end of next quarter. The three national laboratories communication on a bi-monthly basis to make sure Area V projects remain on track and we have a monthly conference call with our Israeli counterparts to make sure we are communicating priorities and coordinating project details.

54 ENVIRONMENTAL SCIENCES↗

Potential Impacts of Accelerated Climate Change: Third Annual Report of Work

This study is part of the U.S. Nuclear Regulatory Commission’s (NRC) Probabilistic Flood Hazard Assessment (PFHA) research program that aims to develop regulatory tools and guidance to support and enhance the NRC’s capacity to perform thorough and efficient risk-informed reviews of license applications and license amendment requests. The NRC asked Pacific Northwest National Laboratory (PNNL) to prepare a summary of current climate research and results regarding hydrometeorological phenomena that are of interest in safety assessments and environmental impact assessments for commercial nuclear power plants. In Year 1, PNNL staff prepared an annual report that summarized recent scientific findings about global and regional climate change, with a particular focus on climatic elements that are relevant to NRC concerns on a national level (i.e., increasing air and water temperatures, decreasing water availability, increasing frequency and intensity of storms and flooding, and sea-level rise). In Year 2 activities, PNNL staff summarized recent research findings about climate change for the Southeast Region of the United States (i.e., historical and projected changes in air temperature, precipitation, hurricanes, sea-level rise, storm surge, tornadoes, flooding, and low flows). This current report summarizes Year 3 activities, which focused on reviewing region-specific scientific findings about climate change for the Midwest Region. Consistent with the U.S. Global Change Research Program Third National Climate Assessment (NCA3) and the Climate Science Special Report for the Fourth National Climate Assessment (NCA4, Volume I), this report defines the Midwest Region to comprise eight states—Illinois, Indiana, Iowa, Michigan, Minnesota, Missouri, Ohio, and Wisconsin. Except for Indiana, the states in the Midwest Region have operating nuclear power plants. Further, new nuclear power reactor permit and license applications have been submitted to the NRC in the recent past for sites located in two midwestern states. Therefore, having an improved understanding of potential climate changes and their hydrologic impacts in the Midwest Region is important to informing the PFHA research program.

54 ENVIRONMENTAL SCIENCES↗

Potential Impacts of Accelerated Climate Change (Second Annual Report of Work)

This study is part of the U.S. Nuclear Regulatory Commission’s (NRC) Probabilistic Flood Hazard Assessment (PFHA) research plan that aims to develop regulatory tools and guidance to support and enhance the NRC’s capacity to perform thorough and efficient reviews of license applications and license amendment requests. In Year 1, Pacific Northwest National Laboratory staff prepared an annual report that summarized recent scientific findings on climate change, with a particular focus on climatic elements that are relevant to NRC concerns on a regional level (i.e., increasing air and water temperatures, decreasing water availability, increasing frequency and intensity of storms and flooding, and sea-level rise). This report summarizes Year 2 activities, which focused on reviewing scientific findings regarding region-specific climatic extremes for the southeastern United States. According to the U.S. Global Change Research Program Third National Climate Assessment, the U.S. Southeast Region consists of 11 southeastern states, Puerto Rico, and the Virgin Islands. Except for Kentucky, Puerto Rico, and the Virgin Islands, all included states have operating nuclear power plants. Further, new nuclear power reactor permit and license applications have been submitted to the NRC in the recent past for sites located in several southeastern states. Therefore, having an improved understanding of potential climate changes and their hydrologic impacts in the Southeast Region is important to inform the PFHA research plan. Climatic features relevant to the NRC for the Southeast Region include high temperature extremes, precipitation extremes, flooding, high winds associated with tropical cyclones and tornadoes, sea-level rise, and storm surge and associated inland inundation. Drawing primarily from the climate assessment reports and peer-reviewed literature, this Year 2 annual report summarizes the observed climate, its past changes, and its projected changes, as well as 21st century hydrologic impacts in the Southeast Region. Despite the relatively mild changes observed in the past and projected in the future for the mean climate of the Southeast Region, many aspects of climatic extremes such as extreme precipitation have exhibited changes in the last century. In addition, climate and hydrologic models project further changes in the future. Pacific Northwest National Laboratory staff presented updates summarizing these findings at the Second Annual PFHA Research Workshop, which took place from January 23 to 25, 2017, at NRC Headquarters in Rockville, Maryland.

54 ENVIRONMENTAL SCIENCES↗

Laboratory-Based X-ray Absorption Spectroscopy on a Working Pouch Cell Battery at Industrially-Relevant Charging Rates

Li-ion battery (LIB) research has continuing importance for the entire range of applications from consumer products to vehicle electrification and grid stabilization. In many cases, standard electrochemical methods only provide an overall voltage or specific capacity, giving an inadequate description of parallel redox processes or chemical gradients at the particle and pack level. X-ray absorption fine structure (XAFS) is frequently used to augment bulk electrochemical data, as it provides element-specific changes in oxidation state and local atomic structure. Such microscopic descriptors are crucial for elucidating charge transfer and structural changes associated with bonding or site mixing, two key factors in evaluating state of charge and modes of cell failure. However, the impact of XAFS on LIB research has been significantly constrained by a logistical barrier: contemporary XAFS work is performed almost exclusively at synchrotron X-ray light sources, where beamtime is infrequent and experiment time-frames are limited. In this report we show that modern laboratory-based XAFS cannot only be applied to, e.g., characterization of ex situ LIB electrode materials, but can also be used for operando studies at industrially-relevant charging rates in a standard pouch cell preparation. Such capability enables accelerated discovery of new materials and improved operation modes for LIBs.

25 ENERGY STORAGE↗

Development of Next Generation Hierarchical Hybrid Cu-Si anode Batteries via Direct-Ink Writing Application: End of (6th) Month Report - November 2025

Sustainable renewable energy continues to be in dire need to effectively combat global warming. Emerging technology for electric vehicles/ devices remains in high demand that is not only lower in cost, more efficient, but safer in comparison to commercial materials on the market. Although first-generation lithium-ion batteries have exhibited extensive commercial application, conventional graphite no longer meets this increasing demand as an efficient anode material. Due to the fact that graphite has a subpar theoretical specific capacity (372 mAh g -1 ), thus significant limitations in rate capability (for potential faster charging at higher C-rates currently commercially available.). Alternatively, silicon has gained significant attention as a superior candidate to potentially surpass graphite. Due to silicon’s exceedingly high theoretical capacity (4,200 mAh g -1 ) in comparison to standard graphite, its abundance thus in turn it’s low-cost, in addition to exhibiting a significantly low working potential (< 0.4 V vs Li/Li + ). However, one of the main (and most detrimental) challenges is silicon’s tendency to expand in volume (> 300%) upon discharge as it begins the lithiation process. As a direct result, it causes not only for the particles to both crack and pulverize under mechanical stress as the volume continues to expand and contract during cycling. Upon assembling the cell, it needs to undergo ‘charging’ for initially discharging/ ‘activating’ the cell, otherwise commonly known as the ‘formation’ step. As a result a solid electrolyte interface (SEI) layer begins to form at the anode surface because some of the electrolyte begins to react during the formation process. However, this (SEI) layer is deemed as a ‘protective’ interlayer because in theory it prevents further reaction as the cell continues to cycle. However, due to the volume change it causes significant degradation at the interface. As cracking starts to occur at the anode surface, it results in a ‘new’ altered surface with each cycle that causes further reaction with the electrolyte as a byproduct quickly consuming active Li/ and more electrolyte. Thus, fracturing this ‘protective layer,’ causing significantly higher impedance as a result, and in turn a decline in capacity due to active Li-loss. In addition to the active material exfoliating off from the current collector, further contributing to the steady decline in capacity and overall performance. Current state of the art Si-anode batteries on the market range between a maximum content of 5-10 Si wt%. It has been previously reported Tesla has utilized SiO x -C anodes containing 5 wt% Si within their ‘Model 3/ Model X’ electric vehicles. However, more recent ‘Model 3’ vehicles have started to incorporate 10 Si wt%, in which they were able to increase their energy density upwards by approximately 30%. Recent effort has been focused on continuing to increase the wt% of Si being utilized, eventually to 100 wt% of Si, to maximize the energy density even further.

36 MATERIALS SCIENCE↗

Injection of oxygen vacancies in the bulk lattice of layered cathodes

Surfaces, interfaces, and grain boundaries are, classically, known to be sinks at which defects generated within bulk lattice will preferentially migrate to and get annihilated, therefore rejuvenating a crystalline lattice to restore the intended functionalities.1, 2, 3 Here we report an inverse case by which the defects generated at the particle surface are continuously pumped into the bulk lattice and consequentially compromising the intended functionalities. We discovered that during the operation of a rechargeable battery, oxygen vacancies generated at cathode particle surfaces migrate toward inside of a perfect lattice in lithium-rich layered cathodes, featuring electrochemical driven surface vacancy creation, injection and condensation phenomenon and revealing an unrecognized surface process induced bulk lattice degradation featured with void formation and lattice reorganization. This process is associated with a high-cutoff voltage at which the anionic redox is activated. Coupling with calculations, we substantiate that triggering of anionic redox leads to sharply lowering of both formation energy of oxygen vacancy and migration barrier of oxidized oxide ions, therefore enabling migration of oxygen vacancy via oxidized oxide ion and leading to the injection of oxygen vacancy generated at the particle surface into the bulk lattice. This work unveils unpredicted behavior of oxidized oxide ion, leading to essential insight for designing of high capacity cathode for better batteries through coupled cationic and anionic redox dynamics in layered cathodes. In a broad term, this work provides insight on the intimate coupling between interfacial process and bulk lattice behavior for governing electrode functionality.

Yan, Pengfei↗

Tuning Li 2 O 2 Formation Routes by Facet Engineering of MnO 2 Cathode Catalysts

In lithium-oxygen batteries, the solubility of LiO 2 intermediates in the electrolyte regulates the formation routes of the Li 2 O 2 discharge product. High-donor-number electrolytes with a high solubility of LiO 2 tend to promote the formation of Li 2 O 2 large particles following the solution route, which eventually benefits the cell capacity and cycle life. Here, we propose that facet engineering of cathode catalysts could be another direction in tuning the formation routes of Li 2 O 2 . In this work, fi-MnO 2 crystals with high occupancies of {111} or {100} facets were adopted as cathode catalysts in Li-O 2 batteries with a tetra(ethylene)glycol dimethyl ether electrolyte. The {111}-dominated beta-MnO 2 catalyzed the formation of the Li 2 O 2 discharge product into large toroids following the solution routes, while {100}-dominated beta-MnO 2 facilitated the formation of Li 2 O 2 thin films through the surface routes. Further computational studies indicate that the different formation routes of Li 2 O 2 could be related to different adsorption energies of LiO 2 on the two facets of beta-MnO 2 . Our results demonstrate that facet engineering of cathode catalysts could be a new way to tune the formation route of Li 2 O 2 in a low-donor-number electrolyte. Here, we anticipate that this new finding would offer more choices for the design of lithium-oxygen batteries with high capacities and ultimately a long cycle life.

25 ENERGY STORAGE↗

Selected test results from the LiFeBatt iron phosphate Li-ion battery.

In this paper the performance of the LiFeBatt Li-ion cell was measured using a number of tests including capacity measurements, capacity as a function of temperature, ohmic resistance, spectral impedance, high power partial state of charge (PSOC) pulsed cycling, pulse power measurements, and an over-charge/voltage abuse test. The goal of this work was to evaluate the performance of the iron phosphate Li-ion battery technology for utility applications requiring frequent charges and discharges, such as voltage support, frequency regulation, and wind farm energy smoothing. Test results have indicated that the LiFeBatt battery technology can function up to a 10C{sub 1} discharge rate with minimal energy loss compared to the 1 h discharge rate (1C). The utility PSOC cycle test at up to the 4C{sub 1} pulse rate completed 8,394 PSOC pulsed cycles with a gradual loss in capacity of 10 to 15% depending on how the capacity loss is calculated. The majority of the capacity loss occurred during the initial 2,000 cycles, so it is projected that the LiFeBatt should PSOC cycle well beyond 8,394 cycles with less than 20% capacity loss. The DC ohmic resistance and AC spectral impedance measurements also indicate that there were only very small changes after cycling. Finally, at a 1C charge rate, the over charge/voltage abuse test resulted in the cell venting electrolyte at 110 C after 30 minutes and then open-circuiting at 120 C with no sparks, fire, or voltage across the cell.

17 WIND ENERGY↗

Long-term implications of sustained wind power growth in the United States: Direct electric system impacts and costs

This paper evaluates potential changes in the power system associated with sustained growth in wind generation in the United States to 35% of end-use demand by 2050; Wiser et al. (2016) evaluate societal benefits and other impacts for this same scenario. Under reference or central conditions, the analysis finds cumulative wind capacity of 404 gigawatts (GW) would be required to reach this level and drive 2050 incremental electricity rate and cumulative electric sector savings of 2% and 3% respectively, relative to a scenario with no new wind capacity additions. Greater savings are estimated under higher fossil fuel costs or with greater advancements in wind technologies. Conversely, incremental costs are found when fossil fuel costs are lower than central assumptions or wind technology improvements are more-limited. Through 2030, the primary generation sources displaced by new wind capacity include natural gas and coal-fired generation. By 2050, wind could displace other renewables. Incremental new transmission infrastructure totaling 29 million megawatt-miles is estimated to be needed by 2050. In conjunction with related societal benefits, this work demonstrates that 35% wind energy by 2050 is plausible, could support enduring benefits, and could result in long-term consumer savings, if nearer-term (pre-2030) cost barriers are overcome; at the same time, these opportunities are not anticipated to be realized in their full form under 'business-as-usual' conditions.

17 WIND ENERGY↗

Production of Salable Rare Earths Products from Coal and Coal Byproducts in the U.S. Using Advanced Separation Processes (Final Technical Report)

The entirety of the report that follows this brief Executive Summary Chapter is the product of a Funding Announcement by the US Department of Energy (DOE), Office of Fossil Energy, originally issued 09/28/2016, otherwise known as Funding Opportunity Number: DE-FOA-0001627, under the title of “Production of Rare Earth Elements from Domestic U.S. Coal and Coal By-Products” The solicitation was subsequently amended several times ending in amendment 000005. Ultimately a consortium designated “Minerals Refining and Rare Earth Consortium” (to which many of the remaining participants recited in this report joined) filed a proposal on December 8, 2016. On June 9, 2017, the contracting office of the US DOE, National Energy Technology Laboratory (NETL), alerted Dr. Keim, the Authorized Representative of the December 08, 2016, proposal, that the consortium proposal had been selected. In summary, this report presents the results of the efforts in meeting the stated project objectives as outlined in DE-FOA-0001627 to wit: “The main objective of the proposed work is to design and construct a demonstration plant that can extract rare earth elements (REEs) from domestic U.S. coal and coal by-products. The plant will produce salable rare earth elements and intermediates, including at a minimum three individual REEs (preferably heavy rare earths) at 90-99% purities, with output capacities in excess of 10 pounds per day of composite rare earth products (reported as oxides). In addition, the plant will produce high value premium solid fuels, magnetite and other materials to increase the economic viability of the plant and to create jobs. If successful, the proposed work will help develop a domestic supply chain of the critical materials that are essential for the development of renewable energy resources, high-tech industries and a strong national defense.” The principal investigators immediately launched the tasks outlined in the Statement of Project Objectives (SOPO) in accordance to its Project Management Plan (PMP) based on their collective knowledge of the subject matter and the expectations generated by preliminary laboratory results. Events and circumstances related in part to the vagaries of the coal mining, processing, and marketing industry triggered a series of carefully deliberated step-wise transitions from the original Lower Kittanning coal source in West Virginia to an ultimate stopping point with the Fire Clay Seam (Hazard No. 4) rejects from Blue Diamond Coal Company in Kentucky (Operated by Blackhawk Mining LLC). These transitional steps are discussed in substantial detail in the body of this report. Notably, substantial data of potential future significance, both in terms of sample collection, processing, and testing, were collected in the process. Unfortunately, as reported in the Techno-Economic Chapter of this report, none of these efforts resulted in an anticipated economically viable venture. Thus, the principals associated with this project elected not to transition into a “Pilot Plant” operation. A proposal for funding that pilot plant was therefore not requested. The outcome of this initiative under DE-FOA-0001627 notwithstanding, the following portions of this Executive Summary outline the activities of the investigators. That said, the reader is encouraged to examine the main body of this report in which each chapter is assembled as a free-standing product, complete with Table of Contents, for practical and easy reference purposes.

01 COAL, LIGNITE, AND PEAT↗

The exercise and environmental physiology of extravehicular activity

Extravehicular activity (EVA), i.e., exercise performed under unique environmental conditions, is indispensable for supporting daily living in weightlessness and for further space exploration. From 1965-1996 an average of 20 h x yr(-1) were spent performing EVA. International Space Station (ISS) assembly will require 135 h x yr(-1) of EVA, and 138 h x yr(-1) is planned for post-construction maintenance. The extravehicular mobility unit (EMU), used to protect astronauts during EVA, has a decreased pressure of 4.3 psi that could increase astronauts' risk of decompression sickness (DCS). Exercise in and repeated exposure to this hypobaria may increase the incidence of DCS, although weightlessness may attenuate this risk. Exercise thermoregulation within the EMU is poorly understood; the liquid cooling garment (LCG), worn next to the skin and designed to handle thermal stress, is manually controlled. Astronauts may become dehydrated (by up to 2.6% of body weight) during a 5-h EVA, further exacerbating the thermoregulatory challenge. The EVA is performed mainly with upper body muscles; but astronauts usually exercise at only 26-32% of their upper body maximal oxygen uptake (VO2max). For a given ground-based work task in air (as opposed to water), the submaximal VO2 is greater while VO2max and metabolic efficiency are lower during ground-based arm exercise as compared with leg exercise, and cardiovascular responses to exercise and training are also different for arms and legs. Preflight testing and training, whether conducted in air or water, must account for these differences if ground-based data are extrapolated for flight requirements. Astronauts experience deconditioning during microgravity resulting in a 10-20% loss in arm strength, a 20-30% loss in thigh strength, and decreased lower-body aerobic exercise capacity. Data from ground-based simulations of weightlessness such as bed rest induce a 6-8% decrease in upper-body strength, a 10-16% loss in thigh extensor strength, and a 15-20% decrease in lower-body aerobic exercise capacity. Changes in EVA support systems and training based on a greater understanding of the physiological aspects of exercise in the EVA environment will help to insure the health, safety, and efficiency of working astronauts.

Review↗

High-resolution ultrahigh-pressure long column reversed-phase liquid chromatography for top-down proteomics

We report development of an approach providing high-resolution RPLC of proteins and its utility for mass spectrometry-based top-down proteomics. A chromatographic peak capacity of ~450 was achieved for proteins and large polypeptides having MWs up to 43 kDa in the context of proteomics applications. RPLC column lengths from 20 to 200 cm, particle sizes from 1.5 to 5 m, bonding alkyl chains from C1 to C2, C4, C8, and C18, and particle surface structures that spanned porous, superficially porous (porous shell, core-shell), and nonporous were investigated at pressures up to14K psi. Column length was found as the most important factor for >20 kDa proteins in gradient RPLC, and shortening column length degraded RPLC resolution and sensitivity regardless of the size and surface structure of the packing particles used. The alkyl chains bonded to the silica particle surface significantly affected the RPLC recovery and efficiency, and short alkyl C1-C4 phases provided higher sensitivity and resolution than C8 and C18 phases. Long gradient separations (e.g., >10 hours) with long columns (e.g., 100 cm) were particularly effective in conjunction with use of high accuracy mass spectrometers (e.g., the Orbitrap Elite) for top-down proteomics with improved proteoform coverage by allowing multiple HCD, CID, and ETD dissociation modes. It was also found that HCD produced small fragments useful for proteoform identification, while low energy CID and ETD often complemented HCD by providing large fragments.

columns and stationary phases↗

Assessing the Future of Distributed Wind: Opportunities for Behind-the-Meter Projects

Wind power is one of the fastest growing sources of new electricity generation in the United States. Cumulative installed capacity was more than 74,000 megawatts (MW) at year-end 2015 and wind power supplied 4.7% of total 2015 U.S. electricity generation. Despite the growth of the wind power industry, the distributed wind market has remained limited. Cumulative installations of distributed wind through 2015 totaled 934 MW. This first-of-a-kind exploratory analysis characterizes the future opportunity for behind-the-meter distributed wind, serving primarily rural or suburban homes, farms, and manufacturing facilities. This work focuses only on the grid-connected, behind-the-meter subset of the broader distributed wind market. We estimate this segment to be approximately half of the 934 MW of total installed distributed wind capacity at year-end 2015. Potential from other distributed wind market segments including systems installed in front of the meter (e.g., community wind) and in remote, off-grid locations is not assessed in this analysis and therefore, would be additive to results presented here. These other distributed wind market segments are not considered in this initial effort because of their relatively unique economic and market attributes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗