Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Peculiarities of the nonlinear absorption of colloidal solutions of CdSe/ZnS quantum dots under stationary single-photon excitation of excitons

Peculiarities of the nonlinear absorption of a colloidal solution of CdSe/ZnS quantum dots with various sizes under resonant stationary excitation of the ground electron–hole (exciton) transition have been revealed by the pump and probe technique. The detected peculiarities of the nonlinear change in absorption are explained by the coexistence and competition of the effects of state filling and charge-induced Stark and temperature long-wavelength shift of the absorption spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impact Analysis of Transitioning to Heat Pump Rooftop Units for the U.S. Commercial Building Stock

Twenty percent (25%) of the energy consumed by the U.S. commercial building sector is from on-site combustion of fossil fuels for space heating. Part of decarbonizing U.S. energy systems to meet climate initiatives will require electrification of space heating equipment, often by transitioning to heat pumps. Rooftop units (RTU) are the most prominent commercial building HVAC system type and should therefore be prioritized for electrification solutions. However, there is limited understanding of the impact on emissions when considering regional electricity generation methods, as well as the impact of ambient temperature on capacity and efficiency, defrost operation, realistic sizing methodologies, and supplementary heating on overall heat pump performance. This study explores the effects of transitioning all installed, existing RTUs to high-performance heat pump RTUs for the U.S. commercial building stock. The analysis is performed using ComStock (TM), the U.S. Department of Energy's calibrated model of the U.S. commercial building stock. Results show 10% and 9% reductions in stock aggregate energy consumption and greenhouse gas emissions, respectively. This analysis will help inform the transition to heat pump RTUs for the U.S. commercial building stock.

commercial building↗

ESI-MS Identification of the Cationic Phosphine-Ligated Gold Clusters Au1-Au22: Insight into the Gold-Ligand Ratio and Abundance of Larger Clusters

Triphenylphosphine (PPh3)-ligated gold clusters offer promising potential applications due to their relative ease of synthesis and usefulness in forming advanced cluster architectures. While previous studies reported cationic PPh3-ligated gold clusters with core sizes of Au1 - Au4, Au6 - Au11, and Au¬13 - Au14, there has not been definitive identification by mass spectrometry of larger clusters in the Au12 - Au25¬ range. Herein, we survey a polydisperse solution of cationic PPh3-ligated gold clusters using high mass-resolution (M/?M = 60,000) electrospray ionization mass spectrometry (ESI-MS). To improve the sensitivity and mass resolution of larger clusters for unambiguous identification, we increased the number of scan averages and reduced the range of mass collection windows to 200 m/z, thereby mitigating potential mass and ion abundance bias resulting from smaller “building block” gold clusters and other solution components present in higher abundance. In addition to the previously reported clusters, we identified several new species including Au5(PPh3)5+, Au12(PPh3)9HCl2+, Au15(PPh3)9Cl2+, Au16(PPh3)10Cl22+, Au17(PPh3)113+, Au18(PPh3)102+, Au19(PPh3)10Cl2+, Au20(PPh3)12H33+, Au21(PPh3)10Cl2+, and Au22(PPh3)10Cl22+, indicating that a full range of clusters between Au1 - Au22 may be observed in a single polydisperse solution. Considering all of the observed clusters, our findings provide evidence that the “magic number” icosahedral Au13 may be the transition point in cluster growth between smaller clusters, exhibiting a 1:1 gold-to-ligand ratio, and larger clusters, wherein subsequent gold atoms are added to the core without an equal number of accompanying ligands. Our method demonstrates that reducing the range of m/z collection windows and increasing the number of scan averages can improve instrument sensitivity for cationic gold clusters and enable a more complete survey of polydisperse solutions, thereby providing new insights to guide and validate the results of other characterization methods and theoretical calculations. This work was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. MH acknowledges support from the DOE Science Undergraduate Laboratory Internship (SULI) program. HH acknowledges support from the DOE Office of Workforce Development for Teachers and Scientist (WDTS) under the Visiting Faculty Program (VFP). This work was performed using EMSL, a national scientific user facility sponsored by the DOE's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for DOE by Battelle.

Hewitt, Michael↗

Integrated Sensing and Controls for Coal Gasification - Development of Model-Based Controls for GE's Gasifier and Syngas Cooler (Final Technical Report)

This report summarizes the achievements and final results of this program. The objective of this program is to develop a comprehensive systems approach to integrated design of sensing and control systems for an Integrated Gasification Combined Cycle (IGCC) plant, using advanced model-based techniques. In particular, this program is focused on the model-based sensing and control system design for the core gasification section of an IGCC plant. The overall approach consists of (i) developing a first-principles physics-based dynamic model of the gasification section, (ii) performing model-reduction where needed to derive low-order models suitable for controls analysis and design, (iii) developing a sensing system solution combining online sensors with model-based estimation for important process variables not measured directly, and (iv) optimizing the steady-state and transient operation of the plant for normal operation as well as for startup using model predictive controls (MPC). Initially, available process unit models were implemented in a common platform using Matlab/Simulink{reg_sign}, and appropriate model reduction and model updates were performed to obtain the overall gasification section dynamic model. Also, a set of sensor packages were developed through extensive lab testing and implemented in the Tampa Electric Company IGCC plant at Polk power station in 2009, to measure temperature and strain in the radiant syngas cooler (RSC). Plant operation data was also used to validate the overall gasification section model. The overall dynamic model was then used to develop a sensing solution including a set of online sensors coupled with model-based estimation using nonlinear extended Kalman filter (EKF). Its performance in terms of estimating key unmeasured variables like gasifier temperature, carbon conversion, etc., was studied through extensive simulations in the presence sensing errors (noise and bias) and modeling errors (e.g. unknown gasifier kinetics, RSC fouling). In parallel, an MPC solution was initially developed using ideal sensing to optimize the plant operation during startup pre-heating as well as steady state and transient operation under normal high-pressure conditions, e.g. part-load, base-load, load transition and fuel changes. The MPC simulation studies showed significant improvements both for startup pre-heating and for normal operation. Finally, the EKF and MPC solutions were coupled to achieve the integrated sensing and control solution and its performance was studied through extensive steady state and transient simulations in the presence of sensor and modeling errors. The results of each task in the program and overall conclusions are summarized in this final report.

01 COAL, LIGNITE, AND PEAT↗

Tailoring transition-metal hydroxides and oxides by photon-induced reactions

Controlled synthesis of transition-metal hydroxides and oxides with earth-abundant elements have attracted significant interest because of their wide applications, for example as battery electrode materials or electrocatalysts for fuel generation. Here, we report the tuning of the structure of transition-metal hydroxides and oxides by controlling chemical reactions using an unfocused laser to irradiate the precursor solution. A Nd:YAG laser with wavelengths of 532 nm or 1064 nm was used. The Ni 2+ , Mn 2+ , and Co 2+ ion-containing aqueous solution undergoes photo-induced reactions and produces hollow metal-oxide nanospheres (Ni 0.18 Mn 0.45 Co 0.37 O x ) or core–shell metal hydroxide nanoflowers ([Ni 0.15 Mn 0.15 Co 0.7 (OH) 2 ](NO 3 ) 0.2 •H 2 O), depending on the laser wavelengths. We propose two reaction pathways, either by photo-induced redox reaction or hydrolysis reaction, which are responsible for the formation of distinct nanostructures. As a result, the study of photon-induced materials growth shines light on the rational design of complex nanostructures with advanced functionalities.

25 ENERGY STORAGE↗

Ultrafast photochemistry of gas-phase transition metal carbonyls

Organometallic photochemistry lies at the heart of photochemical energy conversions in applications such as photocatalysis, photovoltaic cells, and luminescent materials. Thus, understanding how metal and ligand interactions in organometallic complexes modify electronic excited-state properties and reactivity has been the subject of intense studies for decades. Transition metal carbonyls [M n (CO) m ] have long served as prototypical organometallic complexes for understanding metal–ligand bonding and photochemistry and have been studied extensively in solution, matrices, and the gas phase on time scales ranging from femtoseconds to microseconds and longer. This review chronicles the past two and a half decades of efforts in understanding the ultrafast (sub-nanosecond) dynamics of transition metal carbonyls in the gas phase, where complicating solvent influences are absent and multiple experimental probes and high-level electronic structure theory can come together to yield rich information on the intricate interplay of electronic and structural dynamics. This review first lays the groundwork by briefly describing the electronic structure of transition metal carbonyls and introducing the various ultrafast techniques that have been applied to study their unimolecular dynamics. We then provide a detailed historical account on the ultrafast photochemistry of iron pentacarbonyl, nickel tetracarbonyl, and transition metal hexacarbonyls and decacarbonyls, putting the more recent ultrafast studies in the context of prior investigations. In conclusion, we end this review with an outlook on open questions and future possibilities.

Core level spectroscopy↗

Korean Power System Challenges and Opportunities, Priorities for Swift and Successful Clean Energy Deployment at Scale

With South Korea’s electricity demand expected to grow 30% by 2035, transitioning to clean energy resources will be critical in reducing the electric sector emissions and achieving national climate goals. Rapid technological improvements can help keep costs low and maintain grid reliability, if Korea’s government takes a coordinated approach to the clean energy transition. This policy brief identifies key barriers to Korea’s shift toward clean energy, based on the authors’ companion report (A Clean Energy Korea by 2035: Transitioning to 80% Carbon-Free Electricity Generation ), interviews with experts, and the most recent data and literature. It then explores policy solutions for overcoming these technological, economic, and institutional barriers, and suggests market transformation strategies to speed the adoption of clean energy technologies. Amid ongoing cost and technological improvements in wind, solar, and energy storage, advancing this report’s recommended policy actions with maximum coordination among government officials can meaningfully accelerate Korea’s clean energy transition.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Impact Analysis of Transitioning to Heat Pump Rooftop Units for the U.S. Commercial Building Stock: Preprint

20% of the U.S. commercial building sector's energy usage is from on-site combustion of fossil fuels for heating. Decarbonization will require electrification of these systems to meet climate goals, often by transitioning to heat pumps. Rooftop units (RTU) are the most prominent commercial building HVAC system type and should therefore be prioritized for decarbonization solutions. However, there is limited understanding of the impact on emissions that considers regional electricity generation methods, as well as the impact of other heat pump intricacies such as the effects of temperature on capacity/efficiency, defrost operation, realistic sizing methodologies, and supplementary heating. This study explores the effects of transitioning all conventional RTUs to high-performance heat pump RTUs for the U.S. commercial building stock. The analysis is performed using ComStock, DOE's calibrated model of the U.S. commercial building stock developed by NREL. Results show 9% and 17% reductions in stock aggregate energy consumption and GHG emissions, respectively. Furthermore, average heat pump operational details are presented by state. This analysis will help inform the transition to heat pump RTUs for the U.S. commercial building stock.

commercial building electrification↗

Diffused morphotropic phase boundary in relaxor-PbTiO 3 crystals: High piezoelectricity with improved thermal stability

Solid solution ferroelectrics are the most widely used piezoelectric material for numerous electromechanical applications, including sensors, actuators, and transducers. A milestone in ferroelectric research is the discovery of the morphotropic phase boundary that was first reported in Pb(Zr x Ti 1–x )O 3 , which has been extensively solicited to improve the performance of various solid solution ferroelectrics, including those having the highest piezoelectricity known today. However, due to the inherent correlation between phase transition and thermodynamic imbalance, the efforts of building the phase boundary encounter the challenge that high performance materials are generally accompanied by property instability. In this paper, we report a comprehensive study on the crystalline symmetry and polar nano-regions in relaxor-PbTiO 3 crystals by synchrotron measurements and property characterizations. In contrast to the common belief that the morphotropic phase boundary is a narrow composition region, the morphotropic phase boundary in ternary Pb(In 1/2 Nb 1/2 )O 3 -Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 is demonstrated as an extensive region covering at least 9% of the PbTiO 3 content. Such a diffused morphotropic phase boundary is associated with the intensive interaction of polar nano-regions, leading to high piezoelectricity (>1500 pC/N) with greatly improved thermal stability, where the piezoelectric variation is ~90% over the temperature range of 273–373 K, which is about a factor of 3 lower compared to its binary counterpart Pb(Mg 1/3 Nb 2/3 )O 3 -PbTiO 3 . This work sheds light on the fundamental understanding of nanoscale inhomogeneity and macroscopic symmetry in relaxor-PbTiO 3 , and successfully interlinks the structure and properties in complex solid solutions. The existence of a diffused morphotropic phase boundary is also expected to benefit other ferroic systems beyond ferroelectrics, such as ferromagnetic and multiferroic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge-Dependent Cavity Radii for an Accurate Dielectric Continuum Model of Solvation with Emphasis on Ions: Aqueous Solutes with Oxo, Hydroxo, Amino, Methyl, Chloro, Bromo and Fluoro Functionalities

Dielectric continuum solvation models are widely used because they are a computationally efficacious way to simulate equilibrium properties of solutes. With advances that allow for molecular-shaped cavities, they have reached a high level of accuracy, in particular for neutral solutes. However, benchmark tests show that existing schemes for defining cavities are unable to consistently predict accurately the effects of solvation on ions, especially anions. This work involves the further development of a protocol put forth earlier for defining the cavities of aqueous solutes, with resulting advances that are most striking for anions. Molecular cavities are defined as interlocked spheres around atoms or groups of atoms in the solute, but the sphere radii are determined by simple empirically-based expressions involving the effective atomic charges of the solute atoms (derived from molecular electrostatic potential) and base radii. Both of these terms are optimized for the different types of atoms or functional groups in a training set of neutral and charged solutes. Parameters in these expressions for radii were fitted by minimizing residuals between calculated and measured standard free energies of solvation (ΔG s *), weighted by the uncertainty in the measured value. The calculations were performed using density functional theory with the B3LYP functional and the 6-311+G** basis set and the COnductor-like Screening MOdel (COSMO). The optimized radii definitions reproduce ΔG s * of neutral solutes and singly-charged ions in the training set to within experimental uncertainty and, more importantly, accurately predict ΔG s * of compounds outside the training set, in particular anions. Inherent to this approach, the cavity definitions reflect the strength of specific solute-water interactions. We surmise that this feature underlies the success of the model, referred to as the CD-COSMO model for Charge-Dependent (also Camaioni-Dupuis) COSMO model. These findings offer encouragement that we can keep extending this scheme to other functional groups and obtain better accuracy in using continuum solvation models to predict equilibrium properties of aqueous ionic solutes. The approach is illustrated for a number of test cases, including the determination of acidities of an amine base and a study of the tautomerization equilibrium of a zwitterionic molecule (glycine). The approach is also extended to calculating solvation energies of transition states toward a full characterization of reaction pathways in aqueous phase, here in S N 2 exchange reactions. The calculated reactions barriers in aqueous solution are in excellent agreement with experimental values. This work was supported by the U.S. Department of Energy's (DOE) Office of Basic Energy Sciences, Chemical Sciences program. The Pacific Northwest National Laboratory is operated by Battelle for DOE.

36 MATERIALS SCIENCE↗

Statistical description of the sol-gel transition in systems with thermoreversible chemical bonds

A general statistical model is proposed for describing network-forming systems. The model is based on the representation of the partition function for all possible configurations of a thermoreversible network in the form of a functional integral over a scalar field. According to this model, two types of first-order phase transitions can occur in the systems under consideration: macroscopic phase separation with the structural phase transition due to the change in the configuration of the spatial network and the sol-gel transition due to the formation of a thermoreversible percolation cluster consisting of bound structural units. A detailed analysis is performed of the thermodynamic and structural properties of a solution of monomers that have f functional groups and can form thermoreversible chemical bonds. The influence of specific features of the chemical and volume interactions on the phase diagram of the system is investigated. The mutual position of the sol-gel transition line and the phase diagram is determined for different model parameters. It is revealed that two substantially different regimes of the behavior of the sol-gel transition line in the 'temperature-volume fraction of structural units' plane are observed with a change in the rigidity of chemical bonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transition metal-chelating surfactant micelle templates for facile synthesis of mesoporous silica nanoparticles

Highly ordered mesoporous silica nanoparticles with tunable morphology and pore-size are prepared by the use of a transition metal-chelating surfactant micelle complex using Co{sup 2+}, Ni{sup 2+}, Cu{sup 2+}, and Zn{sup 2+} ions. These metal ions formed a metal-P123 micelle complex in an aqueous solution, while the metal ions are chelated to the hydrophilic domain such as the poly(ethylene oxide) group of a P123 surfactant. The different complexation abilities of the utilized transition metal ions play an important role in determining the formation of nano-sized ordered MSNs due to the different stabilization constant of the metal-P123 complex. Consequently, from a particle length of 1700 nm in the original mesoporous silica materials, the particle length of ordered MSNs through the metal-chelating P123 micelle templates can be reduced to a range of 180-800 nm. Furthermore, the variation of pore size shows a slight change from 8.8 to 6.6 nm. In particular, the Cu{sup 2+}-chelated MSNs show only decreased particle size to 180 nm. The stability constants for the metal-P123 complex are calculated on the basis of molar conductance measurements in order to elucidate the formation mechanism of MSNs by the metal-chelating P123 complex templates. In addition, solid-state {sup 29}Si, {sup 13}C-NMR and ICP-OES measurements are used for quantitative characterization reveal that the utilized metal ions affect only the formation of a metal-P123 complex in a micelle as a template. - Graphical abstract: Metal-chelating surfactant micelle templates support a simple and facile preparations of size-tunable ordered MSNs. Black-Small-Square Highlights: Black-Right-Pointing-Pointer Facile preparation of mesoporous silica nanoparticles (MSNs) was achieved by metal-chelating surfactant micelle complex using Co{sup 2+}, Ni{sup 2+}, Cu{sup 2+}, and Zn{sup 2+} ions. Black-Right-Pointing-Pointer Different complexation of metal ions plays an important role in determining the formation of nano-sized ordered MSNs. Black-Right-Pointing-Pointer Systematic characterization of the synthesized materials was achieved by solid-state {sup 29}Si and {sup 13}C-NMR techniques, BET, FT-IR, and XPS. Black-Right-Pointing-Pointer Stability constants for the metal-P123 complex are calculated on the basis of molar conductance measurements in order to elucidate the formation mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linear-Response Time-Dependent Embedded Mean-Field Theory

We present a time-dependent (TD) linear-response description of excited electronic states within the framework of embedded mean-field theory (EMFT). TD-EMFT allows for subsystems to be described at different mean-field levels of theory, enabling straightforward treatment of excited states and transition properties. We provide benchmark demonstrations of TD-EMFT for both local and nonlocal excitations in organic molecules, as well as applications to chlorophyll a, solvatochromic shifts of a dye in solution, and sulfur K-edge X-ray absorption spectroscopy (XAS). It is found that mixed-basis implementations of TD-EMFT lead to substantial errors in terms of transition properties; however, as previously found for ground-state EMFT, these errors are largely eliminated with the use of Fock-matrix corrections. These results indicate that TD-EMFT is a promising method for the efficient, multilevel description of excited-state electronic structure and dynamics in complex systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Entropy-defect synergy for dual luminescence mechanism in spinel: Time-resolved anti-counterfeiting and fingerprint visualization

Multimodal luminescent materials, while promising for anti-counterfeiting, often lack dynamic time-dependent responses and controllable spatial distribution, limiting their encryption capabilities in the spatiotemporal dimension. Here, this work presents a coordinated control strategy based on entropy and defect engineering, and uses a backpropagation (BP) neural network for material screening to successfully prepare spinel Mg 0.8 (Fe 0.04 Co 0.04 Ni 0.04 Cu 0.04 Zn 0.04 )Cr 2 O 4 (MgA 5 CO) phosphors with time-dependent dynamic luminescence behavior. This phosphor simultaneously activated the d-d transition luminescence (∼618 nm) derived from Co 2+ /Cr 3+ and the defect luminescence (∼398 nm) related to zinc vacancies (V Zn ) in a single-phase solid solution. The phosphor exhibits a time-dependent color evolution from pink to purple under fixed-wavelength excitation, due to the different excited-state dynamics and decay lifetimes associated with the d-d transition and defect luminescence. Structural characterization and spectral analysis confirmed the existence of V Zn and its significant role in defect luminescence process. The fluorescent and dynamic luminescent properties of entropy-based spinel oxide enable its use in advanced anti-counterfeiting applications like fingerprint recognition and color-changing dedicated anti-counterfeiting mark, showing promise in high-end and time-dynamic anti-counterfeiting fields. This research not only developed a new type of fluorescent dynamic anti-counterfeiting material, but also provided a new idea for constructing advanced optical functional materials with multiple luminescence mechanisms.

Defect project↗

A general algorithm for solving the algebraic Riccati equation

The generalized eigenvalue problem provides a suitable framework for reliable solutions of many system theoretic, control, and estimation problems. A general algorithm for solving the matrix algebraic Riccati equation (ARE) which utilizes a pencil structure is described here. This algorithm avoids unnecessary inversion of cost or transition matrices, making it a numerically sound way to solve for the gains and/or ARE with singular quadratic costs, for cases satisfying detectability and stabilizability conditions. Examples are solution with discrete dead-beat control, noiseless measurements in Kalman filters and time-delays in discrete-time systems, which cause difficulties in the Hamiltonian standard eigenvalue problem formulation. The ARE algorithm implementatiton and numerical examples are shown.

Walker, R. A.↗

A comparative investigation on structure and multiferroic properties of bismuth ferrite thin films by multielement co-doping

Highlights: • Multielement (Tb, Cr and Mn) co-doped BiFeO{sub 3} films were fabricated by CSD method. • Multielement co-doping induces a structural transition. • It is found effective to stabilize the valence of Fe ions at +3 by the strategy. • The co-doping at A/B-sites gives rise to the superior multiferroic properties. - Abstract: (Tb, Cr and Mn) multielement co-doped BiFeO{sub 3} (BTFCMO) thin films were prepared by the chemical solution deposition method on fluorine doped tin oxide (FTO) substrates. X-ray diffraction, Rietveld refinement and Raman analyses revealed that a phase transition from rhombohedral to triclinic structure occurs in the multielement co-doped BiFeO{sub 3} films. It is found that the doping is conducive to stabilizing the valence of Fe ions and reducing leakage current. In addition, the highly enhanced ferroelectric properties with a huge remanent polarization (2P{sub r}) of 239.6 μC/cm{sup 2} and a low coercive field (2E{sub c}) of 615.6 kV/cm are ascribed to the well film texture, the structure transition and the reduced leakage current by the co-doping. Moreover, the structure transition is the dominant factor resulting in the significant enhancement observed in magnetization (M{sub s} ∼ 10.5 emu/cm{sup 3}), owing to the collapse of the space-modulated spin structure. In this contribution, these results demonstrate that the multielement co-doping is in favor of the enhanced multiferroic properties of the BFO films for possible multifunctional applications.

36 MATERIALS SCIENCE↗

CuSn(OH){sub 6} submicrospheres: Room-temperature synthesis, growth mechanism, and weak antiferromagnetic behavior

Highlights: Black-Right-Pointing-Pointer CuSn(OH){sub 6} spheres have been synthesized via an aqueous solution method at room temperature. Black-Right-Pointing-Pointer The diameters of the CuSn(OH){sub 6} spheres can be tuned by adjusting the molar ratio of SnO{sub 3}{sup 2-} to Cu{sup 2+}. Black-Right-Pointing-Pointer The as-obtained CuSn(OH){sub 6} spheres are antiferromagnetic and have a weak spin-Peierls transition at about 78 K -- Abstract: CuSn(OH){sub 6} submicrospheres with diameters of 400-900 nm have been successfully fabricated using a simple aqueous solution method at room temperature. Influencing factors such as the dosage of reactants and reaction time on the preparation were systematically investigated. The products were characterized with X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TG) and differential thermal analysis (DTA). Results reveal that the CuSn(OH){sub 6} spheres are built from numerous nanoparticles. It is found that the diameter of CuSn(OH){sub 6} spheres can be readily tuned by adjusting the molar ratio of SnO{sub 3}{sup 2-} to Cu{sup 2+}. A possible growth mechanism for the CuSn(OH){sub 6} submicrospheres has been proposed. Amorphous CuSnO{sub 3} submicrospheres were obtained after thermal treatment of the CuSn(OH){sub 6} submicrospheres at 300 Degree-Sign C for 4 h. Standard magnetization measurements demonstrate that the CuSn(OH){sub 6} submicrospheres are antiferromagnetic and have a weak spin-Peierls transition at about 78 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Summary of Flight-Test Results of the VZ-2 Tilt-Wing Aircraft

Flight-test information gained from a tilt-wing research aircraft tested at the Langley Research Center has shown that design problems exist in such fields as low-speed stability and control, handling qualities, and flow separation during transition. The control power in the near-hovering configuration was considered by the pilots to be inadequate in yaw, marginal in pitch, and excessive in roll. Solutions for some of the design problems are indicated; for example, the addition of a leading-edge droop to the wing in an attempt to delay flow separation resulted in such significantly improved handling qualities in the transition range that an additional descent capability of 1,100 feet per minute was obtained.

Pegg, Robert J.↗