Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TUBING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

A High-Pressure Shock Tube Study of Hydrogen and Ammonia Addition to Natural Gas for Reduced Carbon Emissions in Power Generation Gas Turbines

Ignition delay times from undiluted mixtures of natural gas (NG)/H2/Air and NG/NH3/Air were measured using a high-pressure shock tube at the University of Central Florida. The combustion temperatures were experimentally tested between 1000-1500 K near a constant pressure of 25 bar. Mixtures were kept undiluted to replicate the same chemistry pathways seen in gas turbine combustion chambers. Recorded combustion pressures exceeded 200 bar due to the large energy release, hence why these were performed at the high-pressure shock tube facility. The data is compared to the predictions of the NUIGMech 1.1 mechanism for chemical kinetic model validation and refinement. An exceptional agreement was shown for stoichiometric conditions in all cases but strayed at lean and rich equivalence ratios, especially in the lower temperature regime of H2 addition and all temperature ranges of the baseline NG mixture. Hydrogen addition also decreased ignition delay times by nearly 90%, while NH3 fuel addition made no noticeable difference in ignition delay time. NG/NH3 exhibited similar chemistry to pure NG under the same conditions, which is shown in a sensitivity analysis, demonstrating hydrogen chemistry to be dominant in NG/H2 mixtures and hydrocarbon chemistry to be dominant in NG/NH3 mixtures. The reaction CH3 + O2 = CH3O + O is identified and suggested as a possible modification target to improve model performance. Increasing the robustness of chemical kinetic models via experimental validation will directly aid in designing next-generation combustion chambers for use in gas turbines, which in turn will greatly lower global emissions and reduce greenhouse effects.

Pierro, Michael↗

Experimental Study on Flow Condensation of Low Global Warming Potential Refrigerants in a Micro-fin Aluminum Tube

This study investigates the dynamic shifts in refrigerant technologies driven by environmental regulations, particularly emphasizing low global warming potential (GWP). Moreover, there is a rising trend in the adoption of aluminum tubes with internal axial micro-fin structures in heat exchangers to reduce costs. The research focuses on the condensation process within an expanded axial micro-fin aluminum tube with a 5.96 mm fin-tip diameter. Various refrigerants are analyzed, including both single compounds (R-32, R-1234yf, R-1234ze(E)) and zeotropic mixtures (R-454B, R-454C, R-455A). Experimental procedures cover a range of condensation temperatures (35~45 °C), reduced pressures (0.21~0.55), and mass fluxes (150~350 kg/(m² s)), providing crucial data on heat transfer coefficients (HTC) and frictional pressure gradient (FPG). This data is particularly significant for high-glide refrigerants and is instrumental in the design of advanced air conditioning and refrigeration systems aimed at mitigating global warming.

Hu, Yifeng↗

Method and apparatus for fabricating a hybrid tube

An apparatus for fabricating a hybrid tube includes a rotatable mandrel and a first housing configured to translate alongside the rotatable mandrel while dispensing a first strip to be helically wound about the mandrel. The first housing includes an angle adjustment mechanism to control a dispensation angle of the first strip. The apparatus also includes least one energy or adhesive source for bonding overlapping strip portions on the rotatable mandrel and forming the hybrid tube. The at least one energy or adhesive source is configured for translation alongside the rotatable mandrel.

Sinha, Sanjiv↗

Optimizing flow condensation models for next-generation refrigerants in axial micro-fin aluminum tubes

To support the transition to next-generation refrigerants, accurate modelling of heat transfer and pressure drop is essential for designing efficient heat exchangers. Current models, largely based on traditional refrigerants and unexpanded micro-fin tubes, may not reliably predict performance for new refrigerants and expanded micro-fin geometries. This study evaluates four condensation models using experimental data for six A2L refrigerants: R-32, R-454B, R-454C, R-455A, R-1234yf, and R-1234ze(E). For heat transfer models, the Han and Lee (2005) model initially yields the best accuracy (mean absolute Deviation, MAD = 22.1%). To further improve predictions, a correction factor reduces the Cavallini et al. (2009) model’s MAD from 68.2% to 15.4%, while optimization of the Kedzierski and Goncalves (1997) model achieves a MAD of 13.1%. For pressure drop, the Cavallini et al. (1997) model proves most accurate (MAD = 6.4%), with the simpler Haraguchi et al. (1993) model also effective (MAD = 9.4%). Keywords: Flow condensation models, heat transfer coefficient, frictional pressure drop, next-generation refrigerants, aluminum micro-fin tubes

Hu, Yifeng [ORNL] (ORCID:0000000242875185)↗

SPC-70791 Rev 0 MARVEL Inert Gas Subsystem, Secondary Coolant Management Subsystem, and Secondary Coolant Cover Gas Subsystem Tubing and Valve Specification

This specification covers the requirements and details for the selection, testing, cleaning, marking, shipping, inspection and installation (including welding) of the Inert Gas Subsystem, Secondary Coolant Management Subsystem, and Secondary Cover Gas Management Subsystem from the Valve Panel up to the classification division, the patch panel of the upper confinement. Including NaK, argon, eutectic gallium indium tin (eGaInSn), and helium fill tubing, valves, and hangers. These systems consist of the necessary straight lengths, elbows, reducers, fittings, tube connections, instrument taps, and valves called for by applicable drawings. All components shall be procured as ASME Section III Class 2 unless otherwise modified hereinafter. Pressure relief valves have been sized to prevent overpressure in the event there is full regulator flow. This is documented in ECAR-7365.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗

Flow Boiling Pressure Drop Characteristics of Next-generation Refrigerants in a Micro‑fin Copper Tube

This paper presents experimental frictional pressure-drop data for flow boiling of R-410A, R-134a, and next-generation alternatives R-454C, R-455A, R-1234yf, and R-1234ze(E) in a horizontal micro-fin copper tube. Tests were conducted over a range of mass fluxes and evaporation temperatures to characterize refrigerant-dependent two-phase pressure-drop behavior. The results show that frictional pressure gradient increased with mass flux and vapor quality and generally increased as evaporation temperature decreased, with liquid viscosity strongly affecting the observed trends. Among the evaluated correlations, the Goto et al. (2001) model gave the best overall agreement with the measurements before optimization. Further optimization of the Kuo and Wang (1996) and Goto et al. (2001) models reduced the overall mean absolute deviation to below 15%, with the optimized Goto (2001) model providing the most consistent predictions across all six refrigerants. The results support improved pressure-drop prediction and evaporator design for next-generation refrigerants in micro-fin tubes.

Hu, Yifeng [ORNL] (ORCID:0000000242875185)↗

Bright Photoluminescence from the Inner Tubes of Peapod-Derived Double-Walled Carbon Nanotubes

Corrugated carbon nanotubes containing a number of defective carbon rings can be synthesized from the coalescence of C60 encapsulated in SWNTs (peapods). In this letter we show that contrary to common wisdom, the presence of non-hexagonal rings can actually induce metallic behavior. To demonstrate this, we used a combination of photoluminescence studies, Raman spectroscopy, transmission electron microscopy, and first-principle quantum calculations. Furthermore, we demonstrate that these metallic corrugated inner tubes can be converted into semiconducting tubes by high-temperature thermal treatment in argon. This finding demonstrates for the first time the versatility of the electronic properties for the coalesced structures and provides a novel way to tailor them by thermal processing.

36 MATERIALS SCIENCE↗

Measurement of the flow properties within a copper tube containing a deflagrating explosive

We report on the propagation of deflagration waves in the high explosive (HE) PBX 9501 (95 wt % HMX, 5 wt% binder). Our test configuration, which we call the def1agration cylinder test (DFCT), is fashioned after the detonation cylinder test (DTCT) that is used to calibrate the JWL detonation product equation of state (EOS). In the DFCT, the HE is heated to a uniform slightly subcritical temperature, and is ignited at one end by a hot wire. For some configurations and initial conditions, we observe a quasi-steady wave that flares the tube into a funnel shape, stretching it to the point of rupture. This behavior is qualitatively like the DTCT, such that, by invoking certain additional approximations that we discuss, its behavior can be analyzed by the same methods. We employ an analysis proposed by G.I. Taylor to infer the pressure-volume curve for the burning, expanding flow. By comparing this result to the EOS of HMX product gas alone. we infer that only {approx}20 wt% of the HMX has burned at tube rupture. This result confirms pre-existing observations about the role of convective burning in HMX cookoff explosions.

66↗

Nonlinear full-wave-interaction analysis of a gyrotron-traveling-wave-tube amplifier based on a lossy dielectric-lined circuit

The stability of the millimeter-wave gyrotron-traveling-wave-tube (gyro-TWT) amplifier can be effectively improved via controlling the propagation characteristics of the operating modes using lossy dielectric-lined (DL) waveguide. Self-consistent nonlinear theory of the electron cyclotron maser (ECM) interaction in lossy DL circuit is developed based on a full-wave study of the propagation characteristics of the DL waveguide. This nonlinear theory fully takes into consideration the waveguide structure and the lossy dielectric characteristics. It is capable of accurately calculating the ECM instability between a cyclotron harmonic and a circular polarized mode, and effectively predicting the nonlinear stability of the DL waveguide-based gyro-TWT. Systematic investigation of a Ka-band TE{sub 01} mode DL waveguide-based gyro-TWT is carried out, and numerical calculation reveals a series of interesting results. This work provides a basic theoretical tool for further exploring the application of the lossy DL waveguide in millimeter-wave gyro-TWTs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear analysis of a W band groove-loaded folded waveguide traveling wave tube

A linearized field theory of a groove-loaded folded waveguide traveling wave tube (FWTWT) is developed. The influence of groove dimensions and beam parameters on the linear gain and bandwidth of the device is investigated by numerical calculation. In addition, a comparison of the linear gain properties between the groove-loaded FWTWT and the conventional one is also carried out. It is indicated from the investigation that by the groove loading, the electric field that acts on the electron beam is enhanced, the electron beam gives more energy to wave, and the linear gain is raised.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of terahertz sheet beam traveling wave tube amplifier with nanocomposite cathode

Particle-in-cell simulations of a staggered double grating array traveling wave tube intended as a wideband amplifier for terahertz communications, sensing, and imaging applications showed that, for an electron beam power of 5 kW, it produces 150-275 W, corresponding to 3%-5.5% electronic efficiency, at 0.22 THz with over {approx}30% bandwidth and with greater than 12 dB/cm growth rate. The circuit has been fabricated by both UV lithography and high precision computer-numerical-control machining with {approx}2-3 {mu}m dimensional tolerance and {approx}50 nm surface roughness. A scandate nanocomposite (Sc{sub 2}O{sub 3}-W) cathode for the electron beam source has successfully emitted 120 A/cm{sup 2} (space charge limited) at 1150 deg. C and 50 A/cm{sup 2} at 1050 deg. C for 8000 h as required to produce the requisite high current density electron beam.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Virtual boundary element method for multistage depressed collector of traveling-wave tubes

In this study, virtual boundary element (VBE) method has been employed in multistage depressed collector (MDC) simulation for high efficiency traveling-wave tubes (TWTs). The basic idea of this method is establishing a mapping relation between the source on the real and virtual boundaries. When calculating the potential of the problem field, the virtual source on virtual boundary is only used, instead of the source on real boundary. We discussed the distance between the virtual and real boundaries and the discrete density of virtual boundary, which are closely related to the calculation accuracy. Based on the VBE method, a new computer aided design code CCAD is developed for the MDC system of high efficiency TWT. The results of simulations performed on an axisymmetric four-stage depressed collector are reported. The advantages of VBE method mainly lie in fast calculation and accurate solution. This is of benefit to designing high efficiency MDC thus developing high efficiency TWT, especially for space TWT.

43 PARTICLE ACCELERATORS↗

Semi-Empirical Model of X-ray Tube Facility

A semi-empirical model of spectrum of X-ray tube was developed for the radiotherapy facility at the A. I. Burnazyan Federal Medical Biophysical Center for radiobiological experiments. The spectrum calculated by a programme EGSnrc was compared with the spectrum of the model. The results of the spectrum computations showed a good concord with the semi-empirical model. Comparison of the calculations of absorbed doses of the photon radiation in heterogeneous tissue phantoms for photon-capture therapy was done.

62 RADIOLOGY AND NUCLEAR MEDICINE↗