Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Steady state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Water Flow Performance of a Superscale Model of the Fastrac Liquid Oxygen Pump

As part of the National Aeronautics and Space Administration's ongoing effort to lower the cost of access to space, the Marshall Space Flight Center has developed a rocket engine with 60,000 pounds of thrust for use on the Reusable Launch Vehicle technology demonstrator slated for launch in 2000. This gas generator cycle engine, known as the Fastrac engine, uses liquid oxygen and RP-1 for propellants and includes single stage liquid oxygen and RP-1 pumps and a single stage supersonic turbine on a common shaft. The turbopump design effort included the first use and application of new suction capability prediction codes and three-dimensional blade generation codes in an attempt to reduce the turbomachinery design and certification costs typically associated with rocket engine development. To verify the pump's predicted cavitation performance, a water flow test of a superscale model of the Fastrac liquid oxygen pump was conducted to experimentally evaluate the liquid oxygen pump's performance at and around the design point. The water flow test article replicated the flow path of the Fastrac liquid oxygen pump in a 1.582x scale model, including scaled seal clearances for correct leakage flow at a model operating speed of 5000 revolutions per minute. Flow entered the 3-blade axial-flow inducer, transitioned to a shrouded, 6-blade radial impeller, and discharged into a vaneless radial diffuser and collection volute. The test article included approximately 50 total and static pressure measurement locations as well as flush-mounted, high frequency pressure transducers for complete mapping of the pressure environment. The primary objectives of the water flow test were to measure the steady-state and dynamic pressure environment of the liquid oxygen pump versus flow coefficient, suction specific speed, and back face leakage flow rate. Results showed excellent correlation between the predicted and experimentally measured pump head rise at low suction specific speeds. Likewise, only small circumferential variations in steady-state impeller exit and radial diffuser pressure distributions were observed from 80% to 120% of the design flow coefficient, matching the computational predictions and confirming that the integrated design approach has minimized any exit volute-induced distortions. The test article exhibited suction performance trends typically observed in inducer designs with virtually constant head rise with decreasing inlet pressure until complete pump head breakdown. Unfortunately, the net positive suction head at 3% head fall-off occurred far below that predicted at all tested flow coefficients, resulting in a negative net positive suction head margin at the design point in water. Additional testing to map the unsteady pressure environment was conducted and interesting rotating phenomena at the inducer inlet were observed. These rotating phenomena's cell numbers, direction, and speed were correlated with pump operating parameters. The impact of the unsteady phenomena and their corresponding energy losses on the unexpectedly poor pump performance is also discussed.

Skelley, Stephen↗
NASA NTRS2002

Design and Study of a LOX/GH2 Throttleable Swirl Injector for Rocket Applications

A LOX/GH2 swirl injector was designed for a 10:1 propellant throttling range. To accomplish this, a dual LOX (liquid oxygen) manifold was used feeding a single common vortex chamber of the swirl element. Hot-fire experiments were conducting for rocket chamber pressures from 80 to 800 psia at a mixture ratio of nominally 6.0 using steady flow, single-point-per-firing cases as well as dynamic throttling conditions. Low frequency (mean) and high frequency (fluctuating) pressure transducer data, flow meter measurements, and Raman spectroscopy images for mixing information were obtained. The injector design, experimental setup, low frequency pressure data, and injector performance analysis will be presented. C efficiency was very high (approximately 100%) at the middle of the throttle-able range with somewhat lower performance at the high and low ends. From the analysis of discreet steady state operating conditions, injector pressure drop was slightly higher than predicted with an inviscid analysis, but otherwise agreed well across the design throttling range. Analysis of the dynamic throttling data indicates that the injector may experience transient conditions that effect pressure drop and performance when compared to steady state results.

Greene, Christopher↗
DOE OSTI2024

Evaluation of a practical approach for field scale moisture flow modeling in heterogeneous media at a semiarid site

Abstract A practical approach for modeling field‐scale moisture flow in a highly heterogeneous unsaturated medium is described in this study. The validity of this approach is demonstrated through comparison of the numerical simulations with field observations at a semiarid site located in southcentral Washington State. The methodology is based on upscaling the core scale hydraulic properties and combining power‐law and tensorial connectivity‐tortuosity (PA‐TCT) approaches to derive macroscopic anisotropy parameters for each hydrostratigraphic unit (HSU) identified in the field. Each heterogeneous HSU is approximated by an equivalent homogeneous medium (EHM) model for which PA‐TCT parameters are used in the flow simulations. The available field data on moisture content and matric potential are compared with steady‐state flow simulations based on the mean form of Richards' equation. While the homogenization or averaging of heterogeneities, embedded in the EHM modeling approximation, cannot capture all of the field‐scale variability, the simulated steady‐state moisture and matric potential profiles capture well the central tendency of the field data. This approach is deemed practical for assessing the fate and transport of contaminants in highly heterogeneous unsaturated media at the transport scale of hundreds of meters.

Khaleel, Raziuddin↗
NASA NTRS1973

Study of helium emissions from active solar regions

A theoretical study is made of the visible and UV line radiation of He I atoms and He II ions from a plane-parallel model flare layer. Codes were developed for the solution of the statistically steady state equation for a 30 level He I - II - III model, and the line and continuum transport equations. These codes are described and documented in the report along with sample solutions. Optical depths and some line intensities are presented for a 1000 km thick layer. Solutions of the steady state equations are presented for electron temperatures 10,000 to 50,000 K and electron densities 10 to the 10th power to 10 to the 14th power/cu cm.

Kulander, J. L.↗
NASA NTRS1985

Two dimensional, transient catalytic combustion of CO-air on platinum

The light off transient of catalytic combustion of lean CO-air mixtures in a platinum coated channel of a honeycomb monolith is studied with a model that resolves transient radial and axial gradients in both the gas and the solid. For the conditions studied it is concluded that: the initial heat release occurs near the entrance at the gas-solid interface and is controlled by heterogeneous reactions; large spatial and temporal temperature gradients occur in the solid near the entrance controlled mostly by the availability of fuel; the temperature of the solid near the entrance achieves almost its steady state value before significant heating of the back; heterogeneous reactions and the gas heated up front and flowing downstream heat the back of the solid; the overall transient time is controlled by the thermal inertia of the solid and by forced convection; radiation significantly influences both transient and steady state particularly near the entrance; the oxidation of CO occurs mostly on the catalyst and becomes diffusion controlled soon into the transient.

Sinha, N.↗
NASA NTRS1987

Theoretical studies of diffuse cloud chemistry

Gas-phase chemistry in the steady state is reviewed. The chemistries of C and O, and the reactions for the formation of CO, D-bearing, and N-bearing molecules are discussed. Consideration is given to the column density of H3(+) in diffuse clouds, the rate coefficient, abundances of H3(+), and the steady-state models of van Dishoeck and Black (1986). The varying lifetime of H2, from 1000 years at the boundary to 5,000,000 years or more at the center of diffuse clouds, and changes in the H2/H abundance ratio in dense clouds are studied, and the nonequilibrium chemistry that occurs in shock-heated gas is analyzed. The estimation of photo rates and the radiation field; models of molecular formations on grains; and the synthesis of molecules in clouds are examined.

Black, John H.↗
NASA NTRS1990

A rate equation approach to gain saturation effects in laser mode calculations

Space exploration and research require large amounts of power. Solar pumped laser systems have been shown to have the potential for meeting the performance requirements necessary for power transmission in space. The successful design of laser systems for these applications will depend, in part, on having a clear understanding of the development of the dynamical processes in the laser cavity and on the effects that changes in physical and design parameters have on laser performance. In particular, it is necessary to know the amplitude and phase distributions of the laser beam at the output aperture when steady state operation is achieved in order to determine the far-field power distribution. The output from the laser will depend on the active medium, the optical environment of the active material and on the gain distribution in the active region as laser action builds up and reaches steady state. An important component in the design process will be a realistic model of the active laser cavity. A computer model of the laser cavity, based on Huygens' principle was developed. The code calculates the amplitude and phase of an optical wave reflected back and forth between the mirrors of a laser cavity. The original code assumes a gain distribution which does not change with the buildup of oscillations in the cavity. A step in the direction of realism is the inclusion of a saturable gain medium in the cavity. The objective is to incorporate saturation effects into the existing computer model.

Roberts, Lila F.↗
NASA NTRS2004

Thermodynamic Vent System Test in a Low Earth Orbit Simulation

A thermodynamic vent system for a cryogenic nitrogen tank was tested in a vacuum chamber simulating oxygen storage in low earth orbit. The nitrogen tank was surrounded by a cryo-shroud at -40 F. The tank was insulated with two layers of multi-layer insulation. Heat transfer into cryogenic tanks causes phase change and increases tank pressure which must be controlled. A thermodynamic vent system was used to control pressure as the location of vapor is unknown in low gravity and direct venting would be wasteful. The thermodynamic vent system consists of a Joule-Thomson valve and heat exchanger installed on the inlet side of the tank mixer-pump. The combination is used to extract thermal energy from the tank fluid, reducing temperature and ullage pressure. The system was sized so that the tank mixer-pump operated a small fraction of the time to limit motor heating. Initially the mixer used sub-cooled liquid to cool the liquid-vapor interface inducing condensation and pressure reduction. Later, the thermodynamic vent system was used. Pressure cycles were performed until steady-state operation was demonstrated. Three test runs were conducted at tank fills of 97, 80, and 63 percent. Each test was begun with a boil-off test to determine heat transfer into the tank. The lower tank fills had time averaged vent rates very close to steady-state boil-off rates showing the thermodynamic vent system was nearly as efficient as direct venting in normal gravity.

VanOverbeke, Thomas J.↗
NASA NTRS2007

Development of a Cryogenic Thermal Distortion Measurement Facility for Testing the James Webb Space Telescope Instrument Support Integration Module 2-D Test Assemblies

The James Webb Space Telescope Instrument Support Integration Module (ISIM) is being designed and developed at the Goddard Space Flight Center. The ISM Thermal Distortion Testing (ITDT) program was started with the primary objective to validate the ISM mechanical design process. The ITDT effort seeks to establish confidence and demonstrate the ability to predict thermal distortion in composite structures at cryogenic temperatures using solid element models. This-program's goal is to better ensure that ISIM meets all the mechanical and structural requirements by using test results to verify or improve structural modeling techniques. The first step to accomplish the ITDT objectives was to design, and then construct solid element models of a series 2-D test assemblies that represent critical building blocks of the ISIM structure. Second, the actual test assemblies consisting of composite tubes and invar end fittings were fabricated and tested for thermal distortion. This paper presents the development of the GSFC Cryo Distortion Measurement Facility (CDMF) to meet the requirements of the ISIM 2-D test. assemblies, and other future ISIM testing needs. The CDMF provides efficient cooling with both a single, and two-stage cryo-cooler. Temperature uniformity of the test assemblies during thermal transients and at steady state is accomplished by using sapphire windows for all of the optical ports on the radiation shields and by using .thermal straps to cool the test assemblies. Numerical thermal models of the test assemblies were used to predict the temperature uniformity of the parts during cooldown and at steady state. Results of these models are compared to actual temperature data from the tests. Temperature sensors with a 0.25K precision were used to insure that test assembly gradients did not exceed 2K lateral, and 4K axially. The thermal distortions of two assemblies were measured during six thermal cycles from 320K to 35K using laser interferometers. The standard deviation for all of the distortion measurements is less than 0.5 microns, which falls within the ISIM requirement of 3 microns.

Miller, Franklin↗
DOE OSTI2021

Grid-Forming Frequency Shaping Control for Low-Inertia Power Systems

As power systems transit to a state of high renewable penetration, little or no presence of synchronous generators makes the prerequisite of well-regulated frequency for grid-following inverters unrealistic. Thus, there is a trend to resort to grid-forming inverters which set frequency directly. We propose a novel grid-forming frequency shaping control that is able to shape the aggregate system frequency dynamics into a first-order one with the desired steady-state frequency deviation and Rate of Change of Frequency (RoCoF) after a sudden power imbalance. The no overshoot property resulting from the first-order dynamics allows the system frequency to monotonically move towards its new steady-state without experiencing frequency Nadir, which largely improves frequency security. We prove that our grid-forming frequency-shaping control renders the system internally stable under mild assumptions. The performance of the proposed control is verified via numerical simulations on a modified Icelandic Power Network test case.

control systems↗
DOE OSTI2020

Grid-Forming Frequency Shaping Control for Low-Inertia Power Systems

As power systems transit to a state of high renewable penetration, little or no presence of synchronous generators makes the prerequisite of well-regulated frequency for grid-following inverters unrealistic. As such, there is a trend to resort to grid-forming inverters which set frequency directly. We propose a novel grid-forming frequency shaping control that is able to shape the aggregate system frequency dynamics into a first-order one with the desired steady-state frequency deviation and Rate of Change of Frequency (RoCoF) after a sudden power imbalance. The no overshoot property resulting from the first-order dynamics allows the system frequency to monotonically move towards its new steady-state without experiencing frequency Nadir, which largely improves frequency security. We prove that our grid-forming frequency-shaping control renders the system internally stable under mild assumptions. The performance of the proposed control is verified via numerical simulations on a modified Icelandic Power Network test case.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Investigating shear flow through continuum gyrokinetic simulations of limiter biasing in the Texas Helimak

Previous limiter-biasing experiments on the Texas Helimak, a simple magnetized torus, have been inconclusive on the effect of flow shear on turbulence levels. To explore this, the first gyrokinetic simulations of limiter biasing in the Helimak using the plasma physics code Gkeyll have been carried out, and results are presented here. For the scenarios considered, turbulence is mostly driven by the interchange instability, which depends on gradients of steady state density profiles. An analysis of both experimental and simulation data demonstrates that shear rates are mostly less than than local linear growth rates, and not all requirements for shear stabilization are met. Yet, the mostly vertical shear flow has an important effect on bulk transport and experimental steady-state density profiles, and changes to the gradients correspond to changes in turbulence levels.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Denoising and Extension of Response Functions in the Time Domain

Response functions of quantum systems, such as electron Green’s functions, magnetic, or charge susceptibilities, describe the response of a system to an external perturbation. They are the central objects of interest in field theories and quantum computing and measured directly in experiment. Further, response functions are intrinsically causal. In equilibrium and steady-state systems, they correspond to a positive spectral function in the frequency domain. Since response functions define an inner product on a Hilbert space and thereby induce a positive definite function, the properties of this function can be used to reduce noise in measured data and, in equilibrium and steady state, to construct positive definite extensions for data known on finite time intervals, which are then guaranteed to correspond to positive spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1975

An experimental investigation of compressor stall using an on-line distortion indicator and signal conditioner

The relation of the steady-state and dynamic distortions and the stall margin of a J85-13 turbojet engine was investigated. A distortion indicator capable of computing two distortion indices was used. A special purpose signal conditioner was also used as an interface between transducer signals and distortion indicator. A good correlation of steady-state distortion and stall margin was established. The prediction of stall by using the indices as instantaneous distortion indicators was not successful. A sensitivity factor that related the loss of stall margin to the turbulence level was found.

Costakis, W. G.↗
NASA NTRS1976

Climate stability for a Sellers-type model

We study a diffusive energy-balance climate model governed by a nonlinear parabolic partial differential equation. Three positive steady-state solutions of this equation are found; they correspond to three possible climates of our planet: an interglacial (nearly identical to the present climate), a glacial, and a completely ice-covered earth. We consider also models similar to the main one studied, and determine the number of their steady states. All the models have albedo continuously varying with latitude and temperature, and entirely diffusive horizontal heat transfer. The diffusion is taken to be nonlinear as well as linear. We investigate the stability under small perturbations of the main model's climates. A stability criterion is derived, and its application shows that the 'present climate' and the 'deep freeze' are stable, whereas the model's glacial is unstable. A variational principle is introduced to confirm the results of this stability analysis. For a sufficient decrease in solar radiation (about 2%) the glacial and interglacial solutions disappear, leaving the ice-covered earth as the only possible climate.

Ghil, M.↗
NASA NTRS1977

An approximate analysis of delay for fixed and variable length packets in an unslotted ALOHA channel

In this paper we compute the mean delay for an unslotted ALOHA random access channel for both fixed and variable length packets. The analysis is based on the concept of a user cycle and obtains steady state results. When the channel is 'stable', the results seem quite accurate. The input parameters to the model are the number of users, the mean think time, and mean retransmission time. The model yields total traffic, throughput and delay but only the latter is emphasized here. Because of the steady state nature of the analysis, no information is obtained on stability. The results are verified by simulation.

Ferguson, M. J.↗
NASA NTRS1977

Departures of the electron energy distribution from a Maxwellian in hydrogen. I - Formulation and solution of the electron kinetic equation. II - Consequences

The problem of calculating the steady-state free-electron energy distribution in a hydrogen gas is considered in order to study departures of that distribution from a Maxwellian at sufficiently low degrees of ionization. A model kinetic equation is formulated and solved analytically for the one-particle electron distribution function in a steady-state partially ionized hydrogen gas, and it is shown that the formal solution can be accurately approximated by using the WKB method. The solutions obtained indicate that the high-energy tail of the distribution is susceptible to distortion by imbalanced inelastic collisions for ionization fractions not exceeding about 0.1 and that such departures from a Maxwellian can lead to significant changes in the collisional excitation and ionization rates of ground-state hydrogen atoms. Expressions for the electron-hydrogen collision rates are derived which explicitly display their dependence on the hydrogen departure coefficients. The results are applied in order to compare self-consistent predictions with those based on the a priori assumption of a Maxwellian distribution for models of the thermal ionization equilibrium of hydrogen in the optically thin limit, spectral-line formation by a gas consisting of two-level atoms, and radiative transfer in finite slabs by a gas of four-level hydrogen atoms.

Shoub, E. C.↗
NASA NTRS1981

A vortex-lattice method for calculating lifting-surface interference

The interference effect of closely coupled lifting surfaces was investigated. A nonsteady vortex-lattice method was applied to calculate the steady-state and nonsteady lift characteristics of configurations having interference effects. The configurations consist of low-aspect-ratio delta wings, at low and high angles of attack. Leading-edge separation and wake roll-up are simulated by a time-dependent wake-shedding procedure. For steady-state flow conditions, this numerical procedure saves a considerable amount of computer time, compared with iterative methods, and yields the same results. A better understanding of the interference effect can be gained by using the method to study the transient behavior. The nonsteady approach also offers the capability of calculating various nonsteady motions, as is demonstrated in the calculation of the longitudinal damping.

Levin, D.↗