Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sample Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Predicting Thermochemical Equilibria with Interacting Defects: Sr 1 − x Ce x Mn O 3 − δ Alloys for Water Splitting

Solar thermochemical hydrogen is one of the few potential routes towards direct fuel production from renewable energy sources, but the thermodynamic boundary conditions for efficient and economic energy conversion are challenging. Success or failure of a given oxide working material depends on the subtle balance between enthalpy and entropy contributions in the redox processes. Developing a mechanistic understanding of the behavior of materials on the basis of atomistic models and first-principles calculations is an important part of advancing the technology. One challenge is to quantitatively predict thermochemical equilibria at high concentrations when the redox-active defects start to interact with each other, thereby impeding the formation of additional defects. This problem is of more general importance to applications that rely on high levels of off-stoichiometry or doping, including, for example, batteries, thermoelectrics, and ceramic fuel cells. To account for such repulsive defect interactions, we introduce a statistical mechanics approach, defining an expression for the free energy of defect interaction based on limited sampling of defect configurations in density functional theory supercell calculations. The parameterization of this energy contribution as a function of defect concentration and temperature allows on-the-fly simulation of thermochemical equilibria. The approach consistently incorporates finite temperature effects by including the leading contributions to the temperature-dependent free energy for the case at hand, i.e., the ideal gas and configurational enthalpies and entropies. We demonstrate the capability and utility of the approach by simulating the water splitting redox processes for Sr 1 − x Ce x Mn O 3 − δ alloys. Published by the American Physical Society 2024

08 HYDROGEN↗

SPRUCE Precipitation Chemistry and Bulk Atmospheric Deposition Beginning in 2013

This data set reports the chemistry of precipitation water that was collected at the SPRUCE site located in the S1 bog and calculated values of bulk atmospheric deposition of solutes in precipitation. Sample collection and analyses started during December of 2013 and will continue for the duration of the experiment. Precipitation samples were collected year round on an event-basis from up to three individual collectors. Samples were either composited or individually analyzed, depending on the total volume of water available relative to the amount needed to complete all laboratory analyses. Funnel/bottle collectors were used to collect rainfall and buckets were used to collect snowfall and mixed precipitation. Samples were analyzed for pH, specific conductivity, nutrient concentrations (ammonium, nitrate, soluble reactive phosphorus, total nitrogen), cation concentrations (calcium, magnesium), anion concentrations (chloride, sulfate), total organic carbon concentrations, and natural-abundance stable isotopes of water (δ18O-H2O and δD-H2O). Bulk deposition was calculated by multiplying rainfall amount by solute concentration for ammonium, nitrate, soluble reactive phosphorus (SRP), total nitrogen, calcium, magnesium, chloride, sulfate, and total organic carbon. All measurements were made at the 8.1-ha S1 bog forest site in northern Minnesota, 40 km north of Grand Rapids, in the USDA Forest Service Marcell Experimental Forest (MEF).

54 ENVIRONMENTAL SCIENCES↗

The measurement of heats of solution of high melting metallic systems in an electromagnetic levitation field

A method was tested for measuring the enthalpies of mixing of liquid metallic alloying systems, involving the combination of two samples in the electromagnetic field of an induction coil. The heat of solution is calculated from the pyrometrically measured temperature effect, the heat capacity of the alloy, and the heat content of the added sample. The usefulness of the method was tested experimentally with iron-copper and niobium-silicon systems. This method should be especially applicable to high-melting alloys, for which conventional measurements have failed.

Frohberg, M. G.↗

What more can be done with XPS? Highly informative but underused approaches to XPS data collection and analysis

Because of the importance of surfaces and interfaces in many scientific and technological areas, the use of x-ray photoelectron spectroscopy (XPS) has been growing exponentially. Although XPS is being used to obtain useful information about the surface composition of samples, much more information about materials and their properties can be extracted from XPS data than commonly obtained. This paper describes some of the areas where alternative analysis methods or experimental design can obtain information about the near-surface region of a sample, often information not available in other ways. Experienced XPS analysts are familiar with many of these methods, but they may not be known to new or casual XPS users, and sometimes, they have not been used because of an inappropriately assumed complexity. The information available includes optical, electronic, and electrical properties; nanostructure; expanded chemical information; and enhanced analysis of biological materials and solid/liquid interfaces. Many of these analyses can be conducted on standard laboratory XPS systems, with either no or relatively minor system alterations. Topics discussed include (1) considerations beyond the “traditional” uniform surface layer composition calculation, (2) using the Auger parameter to determine a sample property, (3) use of the D parameter to identify sp 2 and sp 3 carbon information, (4) information from the XPS valence band, (5) using cryocooling to expand range of samples that can be analyzed and minimize damage, and (6) using electrical potential effects on XPS signals to extract chemically resolved electrical measurements including band alignment and electrical property information.

Baer, Donald R. [Pacific Northwest National Labora↗

Spinbox: tools for many-body quantum systems in a Monte Carlo context

Spinbox is a piece of software that facilitates quantum mechanical calculations relevant to Monte Carlo simulation of atomic nuclei. At the front lines of research on the nuclear many-body problem are a large number of supercomputer-scale simulation codes. These codes produce valuable results but can be hard to understand, especially for those without intimate knowledge of the relevant theoretical methods. Thus, tools that fill pedagogical roles are extremely valuable. Spinbox makes it easy for one to replicate and analyze the computational processes relevant to a Quantum Monte Carlo (QMC) simulation that may be difficult to understand/debug/analyze due to the scale of the corresponding simulation software. Spinbox is written in Python using other state-of-the-art Python modules for numerical calculations. While a number of Python libraries exist that are suited to general quantum many-body calculations, the motivation of Spinbox is quite particular. In Diffusion Monte Carlo methods (DMC, GFMC, AFDMC), the central calculation is the imaginary-time propagation of individual samples of the many-body wavefunction. Although quantum wavefunctions generally must be described by a probability distribution over a basis, DMC imbues particles (within one sample) with classical spatial coordinates. This method is unusual, so other Python packages are typically not set up to do this easily. Furthermore, the software has built-in options for nuclear systems assuming isospin symmetry, which can be set up with other libraries but is a nontrivial process to do so. Features: - numerical representation of samples of the many-body wavefunctions, including tensor-product states (used in AFDMC) - numerical representation of many-body operators, including tensor-product operators: general, spin, imaginary-time propagation, etc. - the correct associated arithmetic and algebra, implemented as class methods - classes for representing realistic nuclear two- and three-body Hamiltonians (e.g. Argonne V18, Illinois NNN) - large-scale parallel integration over random variables, crucial for the AFDMC method My goal is to make this package open source so that anyone may use it and contribute to it, particularly other researchers doing AFDMC calculations

Fox, Jordan↗

Rapid method for computing the mechanical resonances of irregular objects

A solid object's geometry, density, and elastic moduli completely determine its spectrum of normal modes. Solving the inverse problem—determining a material's elastic moduli given a set of resonance frequencies and sample geometry—relies on the ability to compute resonance spectra accurately and efficiently. Established methods for calculating these spectra are either fast but limited to simple geometries, or are applicable to arbitrarily shaped samples at the cost of being prohibitively slow. Here, we describe a method to rapidly compute the normal modes of irregularly shaped objects using entirely open-source software. Our method's accuracy compares favorably with existing methods for simple geometries and shows a significant improvement in speed over existing methods for irregular geometries.

Acoustics↗

Monthly Sewer Monitoring Report for LLNL Livermore Site (Jun 2020)

Lawrence Livermore National Laboratory (LLNL) collects effluent samples from its sewer outfall at the B196 Sewer Monitoring Station (SMS). Effluent flow-proportional composite samples are collected at the SMS on a daily (midnight-to-midnight), weekly (Thursday through Wednesday), and “monthly” (composited from daily) basis; effluent grab samples are also collected each month at that same location. Certified contract laboratories analyze these compliance samples, and results are used to establish LLNL compliance with the 2019 - 2020 Wastewater Discharge Permit (Permit 1250) granted by the City of Livermore Water Resources Division (WRD). Supplemental analyses for biochemical oxygen demand (BOD) and total suspended solids (TSS) are performed onsite and reported for the calculation and assessment of sewer service charges. Quarterly, effluent is sampled for metals (24-hour composite) and cyanide (grab sample) concentrations (mg/L).

54 ENVIRONMENTAL SCIENCES↗

A Physical Model for Understanding the Activation of MoS 2 Basal-plane Sulfur Atoms for the Hydrogen Evolution Reaction

All the DFT calculations are done with the Vienna Ab Initio Simulation Package (VASP) using the projector augmented wave method. The Bayesian error estimation exchange-correlation functionals (BEEF) with van der Waals interactions are employed. A plane-wave cutoff energy of 400 eV is used together with PAW-PBE potentials where semi core p states are treated as valence. All the calculations allow for spin-polarization. The structures are relaxed until the force is converged to < 0.01 eV/Å. The lattice parameter of MoS 2 unit cell, optimized with this functional, is 3.19 Å. A (4×4) supercell is used to model all the transition metal doped MoS 2 systems studied here, including those with S vacancies. For calculations in the initial dopant structure exploration, the Brillouin zone is sampled with a 3x3x1 Monkhorst-Pack k-point mesh. A 6×6×1 Monkhorst-Pack k-point mesh is used for the H binding energy and density of states calculations. In all calculations, the vacuum layer is set as 15 Å to eliminate periodic interaction perpendicular to the basal plane.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reproducible direct exposure environmental testing of metal-based magnetic media

A flow geometry and flow rate for mixed flowing gas testing is proposed. Use of an impinging jet of humid polluted air can provide a uniform and reproducible exposure of coupons of metal-based magnetic media. Numerical analysis of the fluid flow and mass transfer in such as system has shown that samples confined within a distance equal to the nozzle radius on the surface of impingement are uniformly accessible to pollutants in the impinging gas phase. The critical factor is the nozzle height above the surface of impingement. In particular, the uniformity of exposure is less than plus/minus 2% for a volumetric flow rate of 1600 cm(exp 3)/minute total flow with the following specifications: For a one inch nozzle, the height of the nozzle opening above the stage should be 0.177 inches; for a 2 inch nozzle - 0.390 inches. Not only is the distribution uniform, but one can calculate the maximum delivery rate of pollutants to the samples for comparison with the observed deterioration.

Sides, Paul J.↗

Uncovering the Spectral Energy Distribution in Active Galaxies Using High Ionization Mid-Infrared Emission Lines

The shape of the spectral energy distribution of active galaxies in the EUV soft X-ray band (13.6 eV to 1 keV) is uncertain because obscuration by dust and gas can hamper our view of the continuum. To investigate the shape of the spectral energy distribution in this energy band, we have generated a set of photoionization models which reproduce the small dispersion found in correlations between high-ionization mid-infrared emission lines in a sample of hard X-ray selected AGN. Our calculations show that a broken power-law continuum model is sufficient to reproduce the [Ne V]14.32 microns/[Ne III], [Ne V]24.32 microns/[O IV]25.89 micron and [O IV] 25.89 microns/[Ne III] ratios, and does not require the addition of a "big bump" EUV model component. We constrain the EUV-soft X-ray slope, alpha(sub i), to be between 1.5 - 2.0 and derive a best fit of alpha(sub i) approx. 1.9 for Seyfert 1 galaxies, consistent with previous studies of intermediate redshift quasars. If we assume a blue bump model, most sources in our sample have derived temperatures between T(sub BB) = 10(exp 5.18) K to 10(exp 5.7) K, suggesting that the peak of this component spans a large range of energies extending from approx. (Lambda)600 A to > (Lambda)1900 A. In this case, the best fitting peak energy that matches the mid-infrared line ratios of Seyfert 1 galaxies occurs between approx. (Lambda)700-(Lambda)1000 A. Despite the fact that our results do not rule out the presence of an EUV bump, we conclude that our power-law model produces enough photons with energies > 4 Ry to generate the observed amount of mid-infrared emission in our sample of BAT AGN.

Melendez, M.↗

Free energy calculations using dual-level Born-Oppenheimer molecular dynamics

We describe an efficient and accurate method to compute free energy changes in complex chemical systems that cannot be described through classical molecular dynamics simulations, examples of which are chemical and photochemical reactions in solution, enzymes, interfaces, etc. It is based on the use of dual-level Born-Oppenheimer molecular dynamics simulations. A low-level quantum mechanical method is employed to calculate the potential of mean force through the umbrella sampling technique. Then, a high-level quantum mechanical method is used to estimate a free energy correction on selected points of the reaction coordinate using perturbation theory. The precision of the results is comparable to that of ab initio molecular dynamics methods such as the Car-Parrinello approach but the computational cost is much lower, roughly by two to three orders of magnitude. The method is illustrated by discussing the association free energy of simple organometallic compounds, although the field of application is very broad.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fast and accurate calculation of dilute quantum gas using Uehling–Uhlenbeck model equation

The Uehling–Uhlenbeck (U–U) model equation is studied for the fast and accurate calculation of a dilute quantum gas. In particular, the direct simulation Monte Carlo (DSMC) method is used to solve the U–U model equation. DSMC analysis based on the U–U model equation is expected to enable the thermalization to be accurately obtained using a small number of sample particles and the dilute quantum gas dynamics to be calculated in a practical time. Finally, the applicability of DSMC analysis based on the U–U model equation to the fast and accurate calculation of a dilute quantum gas is confirmed by calculating the viscosity coefficient of a Bose gas on the basis of the Green–Kubo expression and the shock layer of a dilute Bose gas around a cylinder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A method to quantify the 37 Ar emanation fraction in powders and rocks

In order to make predictions of the potential 37 Ar signal from an underground nuclear explosion, a value for the 37 Ar emanation fraction is needed. Here, a system was developed to quantify the emanation fraction from samples ranging in size from powder to small rocks. Assorted rock samples were irradiated with Watt fission spectrum neutrons to produce radioactive argon gas via activation of calcium. The argon produced was extracted on a custom apparatus and cryogenically trapped. The extracted gas was then processed to separate the argon and load it into a proportional counter for counting. The emanation fraction of argon gas from the rock samples was then calculated by comparing the measured and predicted activities.

37Ar↗

Temperature dependence of the electronic structure of semiconductors and insulators

The renormalization of electronic eigenenergies due to electron-phonon coupling (temperature dependence and zero-point motion effect) is sizable in many materials with light atoms. This effect, often neglected in ab initio calculations, can be computed using the perturbation-based Allen-Heine-Cardona theory in the adiabatic or non-adiabatic harmonic approximation. After a short description of the recent progresses in this field and a brief overview of the theory, we focus on the issue of phonon wavevector sampling convergence, until now poorly understood. Indeed, the renormalization is obtained numerically through a slowly converging q-point integration. For non-zero Born effective charges, we show that a divergence appears in the electron-phonon matrix elements at q → Γ, leading to a divergence of the adiabatic renormalization at band extrema. This problem is exacerbated by the slow convergence of Born effective charges with electronic wavevector sampling, which leaves residual Born effective charges in ab initio calculations on materials that are physically devoid of such charges. Here, we propose a solution that improves this convergence. However, for materials where Born effective charges are physically non-zero, the divergence of the renormalization indicates a breakdown of the adiabatic harmonic approximation, which we assess here by switching to the non-adiabatic harmonic approximation. Also, we study the convergence behavior of the renormalization and develop reliable extrapolation schemes to obtain the converged results. Finally, the adiabatic and non-adiabatic theories, with corrections for the slow Born effective charge convergence problem (and the associated divergence) are applied to the study of five semiconductors and insulators: α-AlN, β-AlN, BN, diamond, and silicon. For these five materials, we present the zero-point renormalization, temperature dependence, phonon-induced lifetime broadening, and the renormalized electronic band structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data associated with Quaternary Research manuscript Latest Pleistocene glacial chronology and paleoclimate reconstruction for the East River watershed, Colorado, USA

The data here are associated with Quaternary Research manuscript Latest Pleistocene glacial chronology and paleoclimate reconstruction for the East River watershed, Colorado, USA and include data associated with cosmogenic exposure and depth profile dating as well as glacier-climate numerical modeling. Reconstructing Pleistocene glaciation timing and extent is vital for understanding paleoclimate. While late Pleistocene glaciation has been studied extensively in western North American mountain ranges, the glacial history of the western Elk Range in Colorado remains understudied, particularly in the East River watershed, a site of intense scientific focus. Here we use cosmogenic nuclide exposure and depth–profile dating methods to determine the timing of glaciation in the East River watershed. We use glacier modeling to reconstruct paleoglacier extents and quantify past climate conditions. Our findings indicate that the East River glacier retreated from its maximum position approximately 17–18 ka, moving to recessional positions between 13–15 ka, before experiencing more substantial retreat to high-elevation cirques around 12.9 ka. Glacier modeling suggests that the maximum ice extents at 17–18 ka could have been sustained by temperature depressions of approximately −6.5°C compared to modern conditions, assuming consistent precipitation. Additionally, the ice position at 13–15 ka could have been supported by temperature depressions of around −4.0°C. These results offer insights into the deglaciation timeline in the East River watershed and broader western Elk Range as well as paleoclimate conditions during the late Pleistocene, which may aid future research on critical zone evolution in the East River watershed.The data files include: 1. Table 1 In situ-produced 10Be sample data (.pdf, .csv, .xlsx)2. Table 2 In situ-produced 10Be exposure age results (.pdf, .csv, .xlsx)3. S1_A CRONUS calculator input assuming no erosion (.csv)4. S1_B CRONUS calculator input assuming erosion (.csv)5. S1_C CRONUS calculator results and comparison (.csv)6. S2_A In situ-produced 10Be sample data for depth profile (.csv)7. S2_B In situ-produced 10Be depth profile model input (.csv)8. S2_C In situ-produced 10Be depth profile model results (.csv)9. S3 Monthly cloudiness, rH, and windspeed data used in glacier climate model (.csv)10. S4 Glacier climate model results (.csv)

54 ENVIRONMENTAL SCIENCES↗

Inhomogeneity in electronic phase and flat band in magnetic kagome metal Co 3 Sn 2 S 2

Co 3 Sn 2 S 2 has been reported to be a Weyl semimetal with c-axis ferromagnetism below a Curie temperature of 177 K. Despite the large interest in Co 3 Sn 2 S 2 , the magnetic structure is still unclear. Recent studies have challenged the magnetic phase diagram of Co 3 Sn 2 S 2 by reporting unusual magnetic phases including the presence of exchange bias. Here we show, using X-ray Magnetic Circular Dichroism, a shift in the magnetization hysteresis loop, reminiscent of exchange bias and establish that the magnetic moment in Co arises from the spin, with negligible orbital moment. At 6 K, using spatially-resolved angle-resolved photoemission spectroscopy, we detect a butterfly-shaped electronic band structure at small regions of the sample distinct from the known ferromagnetic band structure. Our density functional theory calculations suggest that the butterfly bands correspond to an antiferromagnetic phase. Separately, we detect a sharp flat band at the Fermi level at some regions in the sample, which we attribute to a surface state. These different electronic states found in a stoichiometric intermetallic invite further efforts to explore the origin and nature of the electronic inhomogeneity associated to magnetism on the mesoscale.

Electronic properties and materials↗

Breakdown of the drift-diffusion model for transverse spin transport in a disordered Pt film

Spin-accumulation and spin-current profiles are calculated for a disordered Pt film subjected to an in-plane electric current within the nonequilibrium Green's function approach. In the bulklike region of the sample, this approach captures the intrinsic spin Hall effect found in other calculations. Near the surfaces, the results reveal qualitative differences with the results of the widely used spin-diffusion model, even when the boundary conditions are modified to try to account for them. One difference is that the effective spin-diffusion length for transverse spin transport is significantly different from its longitudinal counterpart and is instead similar to the mean-free path. Furthermore, this feature may be generic for spin currents generated via the intrinsic spin Hall mechanism because of the differences in transport mechanisms compared to longitudinal spin transport. Orbital accumulation in the Pt film is only significant in the immediate vicinity of the surfaces and has a small component penetrating into the bulk only in the presence of spin-orbit coupling, as a secondary effect induced by the spin accumulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantifying the resonant photoemission of radiation damaged Pu

Here, the resonant photoelectron spectroscopy (ResPes) of new and aged δ-Pu(Ga) is reassessed by using the small oxygen contaminant peaks as an independent and quantitative check upon conventional cross-photon-energy normalization. Good agreement is found between the measured oxygen intensities and the atomic cross section calculations. Consistent with earlier analyses, the radiation induced damage in the aged samples is found to compress and sharpen the 5f peaks. This is associated with increased localization of the 5f bands, corresponding to the 5f density of states calculations that show a narrowing of 5f bandwidth with cluster size diminishment.

36 MATERIALS SCIENCE↗