Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Reactive Dye Adsorption from Aqueous Solution on HPEI-Modified Fe{sub 3}O{sub 4} Nanoparticle as a Superadsorbent: Characterization, Modeling, and Optimization

In this work, the optimum condition for the adsorption of Reactive Blue 19 dye onto Fe{sub 3}O{sub 4} functionalized with hyperbranched polyethylenimine (Fe@HPEI) was determined using response surface methodology. The properties of synthesized magnetic Fe@HPEI nanoparticles were ascertained using FTIR, SEM, TEM, VSM and zeta potential measurement. The experimental adsorption data indicating the positive effect of adsorbent dose and contact time, and the negative effect of pH, initial dye concentration and ionic strength on dye adsorption. At optimal condition; pH 3.4, contact time 25 min, adsorbent dose 0.4 g/L and initial dye concentration 113 mg/L, Fe@HPEI nanoparticles removed dye up to 99.27%. The maximum experimental dye adsorption was near to the predicted value of 100%, which confirmed the reliability of the selected statistical model. The dye adsorption data were fitted well to Langmuir isotherm and pseudo-second-order kinetic, and the maximum adsorption capacity was 500 mg/g. Totally, Fe@HPEI as an effective superadsorbent can be repeatedly utilized for the adsorption of dye from the aqueous environment.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Removal of Congo Red from Aqueous Solution by Hydroxyapatite Nanoparticles Loaded on Zein as an Efficient and Green Adsorbent: Response Surface Methodology and Artificial Neural Network-Genetic Algorithm

This study is based on the application of hydroxyapatite nanoparticles loaded on Zein (Zein/nHAp) as an efficient adsorbent for the removal of Congo red from aqueous solutions. The properties of the adsorbent were characterized using various techniques including FT-IR, XRD, FE-SEM, and BET. The influence of five parameters such as pH, temperature, contact time, initial dye concentration, and adsorbent dosage on the removal percentage of the dye was investigated. The optimum conditions of 5.83, 34.32 °C, 5.20 min, 392.10 ppm, and 0.007 g were achieved for pH, temperature, contact time, initial dye concentration, and adsorbent dosage, respectively. The maximum removal percentage of 99.48% was obtained under the optimum condition that exhibited high adsorption potential of the used adsorbent. Central composite design (CCD) under response surface methodology and artificial neural network-genetic algorithm (ANN-GA) were utilized for optimization of parameters. Comparison of the results of the two models in terms of coefficient of determination (R{sup 2}) and mean absolute percentage error confirmed the prediction potential of CCD and ANN-GA. Higher ability and accuracy of ANN-GA in prediction was found based on given results. The experimental equilibrium data were studied by Langmuir, Freundlich, Temkin and Dubinin-Radushkevic isotherm models and explored that the data well presented by Langmuir model with maximum adsorption capacity of 416.66 mg/g. The adsorption kinetic was well-fitted by the pseudo-second-order model. The thermodynamics of the adsorption displayed spontaneous and endothermic nature of the process. Regeneration investigation showed that Zein/nHAp can impressively be reused, indicating that the adsorbent was a promising one for the removal of Congo red from aqueous solution. Graphical Abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication of Engineered Silica-Functionalized-Polyanilines Nanocomposites for Water Decontamination of Cadmium and Lead

In this study, two novel functionalized silica nanocomposites were synthesized via covalent bonding with nanopolyaniline (NPANI) and crosslinked nanopolyaniline (CrossNPANI) to produce [NSi-NPANI] and [NSi-CrossNPANI], respectively. The two nanocomposites were portrayed by SEM, FT-IR, HR-TEM, BET-surface and TGA. The HR-TEM images of [NSi-NPANI] and [NSi-CrossNPANI] confirmed the particle size in the range 14.28–21.43 and 26.19–35.71 nm, respectively and these two nanocomposites were successfully applied to remove divalent cadmium and lead from solutions. As compared to nanosilica [NSi] sorbent, the maximum capacity values of the two nanocomposites for divalent cadmium and lead were identified to increase from 100–250 µmole g{sup −1} (pH 1.0) to 750–800 µmole g{sup −1} (pH 7.0) and from 400–1050 µmole g{sup −1} (pH 1.0) to 650–1350 µmole g{sup −1} (pH 6.0), at the optimum conditions. The adsorption data were compared using two and three parameter equations based on Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Redlish-Peterson and sips models. The kinetic study of [NSi-NPANI] and [NSi-CrossNPANI] revealed that the pseudo-second order kinetic was the best model to explain the kinetic data for cadmium(II) and lead(II). The free energy of sorption (ΔG{sup o}), enthalpy (ΔH{sup o}), and entropy (ΔS{sup o}) changes were calculated to portend the nature of adsorption. Adsorptive extraction of toxic lead and cadmium from tap water and wastewater was successfully accomplished with the range of percentage recovery values 98.5–100.0 and 91.9–93.0%, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Environmentally Friendly Chitosan-g-poly(acrylic acid-co-acrylamide)/Ground Basalt Superabsorbent Composite for Agricultural Applications

This paper investigates on the preparation of a novel eco-friendly composite hydrogel, chitosan-g-poly(acrylic acid-co-acrylamide)/ground basalt and its potential application as a soil ameliorant. Synthesis was undergone using microwave irradiation. N,N′-methylene bisacrylamide MBA was used as a cross-linker, whereas potassium peroxydisulfate KPS and N,N,N′,N′-tetramethylene diamine TEMED were used as radical initiator and reaction accelerator, respectively. The incorporation of ground basaltic rocks into the hydrogel was very beneficial: (i) It lowers the cost of the final hydrogel, (ii) It enhances the mechanical strength of the hydrogel, (iii) It boosts the maximum water absorbency of the composite, 650 g/g versus 450 g/g for the hydrogel without basalt and (iv) It promotes the thermal stability of the composite in comparison with the hydrogel alone. The prepared composite hydrogel was characterized by FTIR, X-ray diffractometer and scanning electron microscope SEM. The effects of pH and ionic strength on water absorbency were also investigated. The role of the prepared composite as a soil conditioner is performed using eggplant (Solanum melongena) as a model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermal and Mechanical Properties of Eco-friendly Poly(Vinyl Alcohol) Films with Surface Treated Bagasse Fibers

Bagasse fibers reinforced poly(vinyl alcohol) (PVA) composite films were successfully prepared by solution casting method. To enhance the dispersing effect of the fillers, alkali treatment of the plant fibers was adopted before the fabrication of composites. The structure and properties of the resulting composites were characterized by scanning electron microscopy (SEM), X-ray diffraction, differential scanning calorimetry, mechanical tests, water uptake and thermal stability in detail. The results showed that bagasse fibers after surface modification exhibited good compatibility with PVA matrix. The increased polarity as well as the roughness would be beneficial to the interaction and mechanical interlocking between the fiber and matrix. Acting as the heterogeneous nucleation agents, the fibers could enhance the degree of crystallization and decrease the supercooling degrees of PVA matrix. The fibers exhibited dramatically reinforcing effect in the matrix, and with the increase of fiber, the Young’s modulus and tensile yield stress increased. The Young’s modulus and tensile yield stress of composites with 8% filler would be 3 and 2 times compared with neat PVA films. The thermal stability decreased a little and the water uptake increased with the increase of filler content. These composite films would find wide applications in green packaging areas for their fine mechanical and thermal properties.

36 MATERIALS SCIENCE↗

Optimal Design of Ozone Bleaching Parameters to Approach Cellulose Nanofibers Extraction from Sugarcane Bagasse Fibers

Cellulose nanofibers (CNFs) were isolated from sugarcane bagasse (SCB) through the combination of bio-refinery, sulfur-free, and totally chlorine free (TCF) chemo-mechanical pretreatments, with a focus on the optimal design of ozone bleaching parameters based on a response surface methodology (RSM). For this purpose, the most effective parameters in ozone bleaching (temperature, time, and pulp consistency) were set between 40 and 85 °C, 60 and 360 min, and 1–5 wt%, respectively. High-performance liquid chromatography (HPLC), Fourier transform infrared spectroscopy (FTIR), Kappa number, and scanning electron microscopy (SEM) were used to chemically and morphologically characterize the SCB fibers. The size distribution and morphology of CNFs were also evaluated by dynamic light scattering (DLS) and transmission electron microscopy (TEM). HPLC analysis revealed that percentage of cellulose increased from 41.5 to 91.39% after chemical pretreatments. FTIR and Kappa number analyses also confirmed the successful isolation of cellulose fibers from the SCB fibers after chemical pretreatments. Furthermore, DLS results showed that the hydrodynamic diameter of the isolated cellulose fibers reduced to 268 nm by dint of ultrasonication. Additionally, TEM images confirmed the isolation of CNFs: the average diameter of cellulose fibers decreased to about 28 nm after mechanical steps and the yield of fibrillation was found to be around 99%. According to the obtained results, the applied chemo-mechanical treatment appears to be promising for green and facile isolation of CNFs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Effect of Acetylation on the Hydrolytic Degradation of PLA/Clay Nanocomposites

In this study, the hydrolytic degradation of Poly(lactic acid) (PLA) and acetylated PLA (PLA-Ac)–clay nanocomposites were investigated. The organo clay was obtained by ion exchange reaction using cetyl tri methyl ammonium bromide (CTAB). Nanocomposites containing 2, 5 and 8% mass ratio of organo clay (CTAB-O) were prepared. PLA and its organo clay nanocomposites were characterized by scanning electron microscope (SEM), thermo gravimetric analysis (TGA) and X-ray diffraction (XRD) to determine the morphology before and after hydrolytic degradation. Fourier transform infrared (FTIR) analyses of PLA and PLA-Ac were also obtained. The hydrolytic degradation of polymers and their composites were investigated in the phosphate buffered saline solution (PBS). The results showed that controlled hydrolytic degradation was observed in the samples with end group modification of PLA. While weight loss of PLA films was 28%, that of PLA-Ac films was 18% after 60 days degradation time. The weight loss was obtained as 29.5 and 25.5% for PLA-5 wt% organo clay (PLA/5CTAB-O) and PLA-Ac-5 wt% organo clay (PLA-Ac/5CTAB-O) nanocomposites films, respectively. It was also observed that thermal degradation of PLA-Ac was much more than that of PLA. Hydrolytic degradation increased depending on organo clay content. The end group modificated PLA results in controlled hydrolytic degradation. While hydrolytic degradation in polymer films occurred as surface erosion, bulk erosion was observed in composite films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Novel Bio-based Polyaspartic Acid Copolymer: Synthesis, Structure and Performance of Degradation

A novel bio-based polyaspartic acid copolymer, as a multifunctional polymer was fabricated via in-site melting polymerization method using L-aspartic acid, γ-aminobutyric acid, L-phenylalanine and L-alanine as raw materials. The synthetic conditions were studied in detail, and the structure and degradation assays of these copolymers were investigated by FT-IR, XRD, weight loss rate, pH values, intrinsic viscosity and SEM. According to the results, all of the copolymers were found to have similar structure and excellent degradability. Additionally, the optimized copolymer C7 [L-aspartic acid (0.45 mol), γ-aminobutyric acid (0.35 mol), L-phenylalanine (0.05 mol) and L-alanine (0.15 mol)] exhibited the highest weight loss rate among all the copolymers. The weight loss rates on the 28th day in aqueous medium, phosphate buffered saline solution, 5.0 wt% trypsin solution and soil culture medium reached up to 44.74 wt%, 99.75 wt%, 90.67 wt% and 83.58 wt%, respectively. And the appropriate introduction of bio-based amino acids could control the degradation of polyaspartic acid distinctly. All of these results indicated that the bio-based polyaspartic acid copolymer could be used for reference as a good understanding of description the degradation of other environmentally friendly bio-based polymers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrospun ZnO Nanoparticles Doped Core–Sheath Nanofibers: Characterization and Antimicrobial Properties

Coaxial electrospinning technique was used to fabricate the core–sheath composite nanofibers of ZnO nanoparticle (Nps) (10%, 20% w/w) doped polymethyl methacrylate (PMMA) (as sheath) and polyvinyl alcohol (PVA) (as core). Fourier transform infrared (FT-IR) spectra were confirmed the weak forces arise between ZnO Nps, PMMA and PVA matrixes. The hexagonal (wurtzite) structure of ZnO Nps with ~ 30.8 nm of diameter was confirmed from the X-ray diffraction pattern. The morphology and microstructure of core–sheath composite nanofibers were confirmed from the scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It is clearly seen from the TEM images that the PMMA encapsulate the PVA core. Core–sheath composite nanofibers were assessed against Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis) bacteria through quantitative, disk diffusion and viable cell count methods. It was found that ZnO Nps doped core–sheath nanofibers were effectively inhibit the growth of gram positive bacteria, B. subtilis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and Dewatering Property of Two Sludge Conditioners Chitosan/AM/AA and Chitosan/AM/AA/DMDAAC

Two new chitosan-grafting copolymers (chitosan-g-PAM-AA and C-chitosan-g-PAM-AA) as sludge conditioners (flocculation and aggregation) have been prepared by employing ceric sulfate as a free radical initiator under nitrogen atmosphere in aqueous solution. The optimum condition for synthesizing chitosan-grafting copolymer was determined by orthogonal experiments. The structure, morphology and property of the obtained graft polymers were characterized by FT-IR, XRD, SEM, TGA and contact angle. Further, the municipal activated sludge dewatering performance of the synthesized copolymers was evaluated by the filter cake moisture content. Herein, the effects of pH value and dewatering temperatures of activated sludge, loading dosage or cationic degree of C-chitosan-g-PAM-AA on the filter cake moisture content were investigated. The synthesized amphoteric flocculant C-chitosan-g-PAM-AA showed a highly effective flocculation capability for activated sludge compared with chitosan-g-PAM-AA, chitosan, polyacrylamide (PAM). Also, the lowest filter cake moisture content was up to 61.41%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physicochemical Behavior of Penaeuse semisulcatuse Chitin for Pb and Cd Removal from Aqueous Environment

A beta type-chitin was produced from the shell of Penaeuse semisulcatuse shrimp for removal of lead and cadmium from the aqueous environment. Full physicochemical properties of the chitin (FTIR, SEM, mapping, XRD, EDX, AFM, and TGA-DTG) were obtained. Effects of solution pH, chitin dose, metals concentration, and contact time on the lead and cadmium adsorption were assessed. The solution pH had a great influence on the metal removal. Pseudo-first and pseudo-second order models were used to evaluate the kinetic behavior of metals adsorption by P. semisulcatuse chitin. Freundlich isotherm model was slightly better than the Langmuir model to describe the adsorption data. The R{sub L} value (obtained from the Langmuir model) for the adsorption of lead and cadmium was calculated to be 0.027 and 0.133, respectively, which showed the metals adsorption process by the chitin is desirable. The maximum adsorption capacity of lead and cadmium by P. semisulcatuse chitin was determined 13.14 mg/g and 19.15 mg/g, respectively. To desorb the adsorbed-metal from the chitin, the 1M HNO{sub 3} solution was applied and the heavy metals desorption was suitable (90%). The half life (t{sub 1/2}) factor in the adsorption of Pb and Cd onto chitin was calculated 2.817 min and 3.876 min, respectively.

54 ENVIRONMENTAL SCIENCES↗

Photodegradation and Biodegradation Under Thermophile Conditions of Mulching Films Based on Poly(Butylene Adipate-co-Terephthalate) and Its Blend with Poly(Lactic Acid)

Two commercial mulching films based on aliphatic–aromatic copolyesters, poly(butylene adipate-co-terephthalate) (PBAT) and its blend with poly(lactic acid) (PBAT/PLA) were selected to study their photodegradation and their biodegradation under thermophile conditions. The films were buried in an agricultural field and bacteria were isolated from these. Bacterial strains were characterized with a combination of culture-dependent methods and sequencing of part of the 16S ribosomal RNA gene (rDNA). The most prevalent genus isolated was Bacillus and other related genera were found as well. Consortia of the isolated indigenous bacterial strains, IDN-EF and IDN-EC, and an additional consortia that had been previously isolated from exposed polyethylene, Bacillus-MIX, were prepared to perform the biodegradation assay at 45 °C on highly photodegraded films. Changes in the films were studied using chemiluminescence, ATR–FTIR, contact angle, SEM, GPC, DSC and TGA. A biodegradation assay was also performed on the four monomers that constitute the polymers using Bacillus subtilis and Bacillus licheniformis. Mineralization was evaluated by carbon dioxide measurements using an indirect impedance technique. This technique showed that overall there was a higher mineralization for the photodegraded materials. However, the biodegradation was most efficient when B. subtilis was present in the bacterial consortium and especially when the materials had been previously photodegraded.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Environmentally Responsive Poly(N-isopropylacrylamide)-co-poly(acrylic acid) Hydrogels for Separation of Toxic Metals and Organic Explosive Compounds from Water

Temperature and pH-sensitive hydrogels were prepared from N-isopropyl acrylamide and polyacrylic acid through co-polymerization using ammonium persulfate as the initiator, N,N,N’,N’-tetramethylenediamine as the activator and N,N’-methylene bisacrylamide as crosslinker. The gels were characterized on the basis of FTIR and NMR spectral analysis, SEM micrograms and swelling studies. The effect of pH and temperature on swelling behavior of these gels was investigated. Preliminary batch absorption experiments were conducted to explore the feasibility of separating As(V), Cr(VI), the explosive components cyclotrimethylene-trinitramine (RDX), and cyclotetramethylene-tetranitramine (HMX), from aqueous medium using the hydrogels. The results of the study indicated that the hydrogels prepared are stable and the gels have potential environmental applications for separating pollutants from water.

54 ENVIRONMENTAL SCIENCES↗

Synthesis of β-Cyclodextrin Immobilized Starch and Its Application for the Removal of Dyestuff from Waste-Water

A natural polymeric adsorbent, β-cyclodextrin immobilized starch (CS-βCD) was prepared by introducing host functional molecule β-cyclodextrin (β-CD) onto starch in presence of citric acid. The immobilization conditions were optimized to: m CA:m CS = 1:2, reaction time of 2 h and reaction temperature at 120 °C, by varying the input levels of the reactant, CS-βCD with a series of immobilization ratio (IR) and carboxyl content (CC) could be obtained. The FT-IR and {sup 13}C-NMR analysis indicated the β-CD molecules have been immobilized onto starch via the formation of ester linkages. The XRD and SEM analysis showed CS-βCD had more looser structure and more irregular surface compared with native starch. The GPC analysis showed CS-βCD had a reduced molecular weight but a more complicated molecular configuration. The adsorbing capacities of CS-βCD to three cationic dyes (methylene blue, methyl purple and basic fuchsin) were significantly improved compared with native starch, diatomite and zeolite. The adsorption behaviors of CS-βCD to the three dyes had high fitting degrees to both Langmuir and Freundlich models (R{sup 2} > 0.98). The decolourization ratio of CS-βCD to the mixed dyestuff waste-water had reached 88.75%, which was much higher than other absorbents. The results indicated the CS-βCD would become a high-efficiency dyestuff adsorbent, and would have a promising application in the industrial dyestuff waste-water treatment.

36 MATERIALS SCIENCE↗

Enrichment and Recovery of Cr(VI) from Aqueous Solution via a Monolithic Loofah Sponge Modified by Tannins and Arginine

In this study, a monolithic loofah sponge (LS) matrix, which was pretreated by hemicellulase and decorated by amino and guanidine, was successfully endowed with two functions: adsorption and recovery for Cr(VI). As an adsorbent, the modified LS (LS–TAA) has a high adsorption capacity (327.91 mg/g) for Cr(VI), and can be handily reused because of its integrity, good mechanical strength and convenient separation from aqueous solution. As a carrier, the residue of Cr-loaded LS–TAA was discovered to be pure Cr{sub 2}O{sub 3} nanoparticles after calcination. The effect of hemicellulase pretreatment and influencing factors, adsorption kinetics, thermodynamics and isotherm adsorption models were investigated. The samples were characterized by various means including SEM, EDX, FT–IR, XRD, XPS and TEM. The results demonstrated that the LS–TAA should be viewed as a low-cost environment functional material with application potential to treat Cr-polluted wastewater. Graphical Abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Adsorption of Methylene Blue, Brilliant Green and Rhodamine B from Aqueous Solution Using Collagen-g-p(AA-co-NVP)/Fe{sub 3}O{sub 4}@SiO{sub 2} Nanocomposite Hydrogel

In this study, the collagen-g-poly(acrylic acid-co-N-vinylpyrrolidone)/Fe{sub 3}O{sub 4}@SiO{sub 2} (collagen-g-p(AA-co-NVP)/Fe{sub 3}O{sub 4}@SiO{sub 2}) as magnetic nanocomposite hydrogel was synthesized by graft copolymerization of acrylic acid (AA) and N-vinylpyrrolidone (NVP) onto collagen in the presence of the Fe{sub 3}O{sub 4}@SiO{sub 2} using ammonium persulfate as a free radical initiator and bis[2-(methacryloyloxy)ethyl] phosphate as a crosslinker under ultrasound-assisted condition. The blank collagen-g-p(AA-co-NVP) hydrogel and its composite with the Fe{sub 3}O{sub 4}@SiO{sub 2} nanoparticles were characterized by means of FTIR, SEM-EDS, XRD, VSM and TGA methods. The effects of different parameters such as pH, dose of adsorbent and time on swelling behavior were examined. The swelling ratio of the collagen-g-p(AA-co-NVP) hydrogel increased in the presence of the Fe{sub 3}O{sub 4}@SiO{sub 2} nanoparticles. Adsorption behavior of magnetic nanocomposite hydrogel was investigated for the adsorption of dyes and it was found to remove about 93% for methylene blue, 96% for brilliant green and 89% for rhodamine B in 50 mg/L of dyes solutions at pH 7. Kinetic study revealed the applicability of pseudo-first-order and pseudo-second-order models for the adsorption of mentioned dyes. The adsorption isotherm was studied in 25, 35, 45 and 55 °C using Langmuir, Freundlich, Temkin and Sips models and the adsorption data were well described by Langmuir isotherm model. Negative values of ΔG{sup º} for all three dyes suggested the feasibility of dyes removal and support for spontaneous adsorption of mentioned dyes on magnetic nanocomposite hydrogel. Desorption of dyes from the dye loaded nanocomposite hydrogel was simply done in ethanol. The results indicate that the prepared magnetic nanocomposite hydrogel is an efficient adsorbent with high adsorption capacity for the aforementioned dyes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of Recycled Poly(ethylene terephthalate)/Polyacrylonitrile/Styrene Composite Nanofibers by Electrospinning and Their Mechanical Properties Evaluation

Consumption of polyethylene terephthalate (PET) products has increased dramatically in recent decades, resulting in the generation of a large amount of PET waste. For that reason, is necessary to find a new application of recycled material. In this article, we report the synthesis and characterization of recycled poly (ethylene terephthalate) (RPET) obtained from the chemical recycling of post-consumer PET bottles by glycolysis method and the formation of composites nanofibers RPET/polyacrylonitrile (PAN)/styrene (ST). The RPET synthesis was studied through infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA). The viscosity and frequency sweep of the polymeric solutions was evaluated. The composites nanofibers were elaborated by the electrospinning technique and characterized by scanning electron microscopy (SEM), FT-IR, TGA/DSC and nanoindentation. The RPET/PAN/ST composite nanofibers present an average diameter of 456 nm and higher thermal stability compared PAN fibers. The mechanical properties such as hardness and elastic modulus were 4.5 and 7.5 times PAN fibers values, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation of Chitin Nanofiber-Reinforced Xanthan Gum Hydrogels

In this study, chitin was nanofibrillated, cationized, and then used as a reinforcing agent for xanthan gum hydrogels. Amidinated chitin nanofibers (CNFs), which were prepared by partial deacetylation of the nanofibrillated chitin and the subsequent reaction of the generated amino groups with N,N-dimethylacetamide dimethyl acetal, were converted into an amidinium chitin bicarbonate with nanofiber morphology by CO{sub 2} gas bubbling and ultrasonic treatments in water. Xanthan gum hydrogels, which were prepared by exchange of disperse media from xantham gum ion gels with 1-butyl-3-methylimidazolium chloride, were then soaked in the resulting cationic CNF aqueous dispersions with different degrees of substitution (DSs) of amidinium groups to progress composition, giving rise to the CNF-reinforced xanthan gum hydrogels. The presence of CNFs in the hydrogels was confirmed by SEM measurement of the lyophilized samples. The amounts of CNFs in the hydrogels increased with increasing the DS values. The compression testing of the hydrogels suggested the reinforcing effect of CNFs, which were induced by electrostatic interaction owing to anionic nature of xanthan gum.

77 NANOSCIENCE AND NANOTECHNOLOGY↗