Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RISE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Anomalous localization in a kicked quasicrystal

Abstract Quantum transport can distinguish between dynamical phases of matter. For instance, ballistic propagation characterizes the absence of disorder, whereas in many-body localized phases, particles do not propagate for exponentially long times. Additional possibilities include states of matter exhibiting anomalous transport in which particles propagate with a non-trivial exponent. Here we report the experimental observation of anomalous transport across a broad range of the phase diagram of a kicked quasicrystal. The Hamiltonian of our system has been predicted to exhibit a rich phase diagram, including not only fully localized and fully delocalized phases but also an extended region comprising a nested pattern of localized, delocalized and multifractal states, which gives rise to anomalous transport. Our cold-atom realization is enabled by new Floquet engineering techniques, which expand the accessible phase diagram by five orders of magnitude. Mapping transport properties throughout the phase diagram, we observe disorder-driven re-entrant delocalization and sub-ballistic transport, and we present a theoretical explanation of these phenomena based on eigenstate multifractality.

Physics↗

Genome-centric view of carbon processing in thawing permafrost

As global temperatures rise, large amounts of carbon sequestered in permafrost are becoming available for microbial degradation. However, accurate prediction of carbon gas emissions produced from thawing permafrost is limited by our understanding of the resident microbial communities and their associated carbon metabolism. Here, metagenomic sequencing of 214 samples from intact, thawing and thawed sites collected over three years enabled the recovery of 1,529 metagenome-assembled genomes (MAGs), including many from phyla with poor genomic representation. These genomes were shown to broadly reflect the diversity of this complex ecosystem with genus-level representatives recovered for >60% of the community, constituting a two orders of magnitude increase in the number of genomes available for understanding carbon processing in this environment. Metabolic reconstruction, supported by metatranscriptomic and metaproteomic data, revealed key populations involved in organic matter degradation, including bacteria encoding a pathway for xylose degradation only previously identified in fungi. Combined analysis of the microbial communities and geochemical data highlighted lineages correlated with the production of greenhouse gases and suggest novel syntrophic relationships. Our findings link changing biogeochemistry to specific microbial lineages involved in each stage of carbon processing, providing key information for predicting the impact of climate change on these systems.

Woodcroft, Ben J.↗

Effect of climate warming on the annual terrestrial net ecosystem CO 2 exchange globally in the boreal and temperate regions

The net ecosystem CO 2 exchange is the result of the imbalance between the assimilation process (gross primary production, GPP) and ecosystem respiration (RE). The aim of this study was to investigate temperature sensitivities of these processes and the effect of climate warming on the annual terrestrial net ecosystem CO 2 exchange globally in the boreal and temperate regions. A database of 403 site-years of ecosystem flux data at 101 sites in the world was collected and analyzed. Temperature sensitivities of rates of RE and GPP were quantified with Q 10 , defined as the increase of RE (or GPP) rates with a temperature rise of 10 °C. Results showed that on the annual time scale, the intrinsic temperature sensitivity of GPP (Q 10sG ) was higher than or equivalent to the intrinsic temperature sensitivity of RE (Q 10sR ). Q 10sG was negatively correlated to the mean annual temperature (MAT), whereas Q 10sR was independent of MAT. The analysis of the current temperature sensitivities and net ecosystem production suggested that temperature rise might enhance the CO 2 sink of terrestrial ecosystems both in the boreal and temperate regions. Additionally, ecosystems in these regions with different plant functional types should sequester more CO 2 with climate warming.

54 ENVIRONMENTAL SCIENCES↗

The role of nonequilibrium LO phonons, Pauli exclusion, and intervalley pathways on the relaxation of hot carriers in InGaAs/InGaAsP multi-quantum-wells

Under continuous-wave laser excitation in a lattice-matched In 0.53 Ga 0.47 As/In 0.8 Ga 0.2 As 0.44 P 0.56 multi-quantum-well (MQW) structure, the carrier temperature extracted from photoluminescence rises faster for 405 nm compared with 980 nm excitation, as the injected carrier density increases. Ensemble Monte Carlo simulation of the carrier dynamics in the MQW system shows that this carrier temperature rise is dominated by nonequilibrium LO phonon effects, with the Pauli exclusion having a significant effect at high carrier densities. Further, we find a significant fraction of carriers reside in the satellite L-valleys for 405 nm excitation due to strong intervalley transfer, leading to a cooler steady-state electron temperature in the central valley compared with the case when intervalley transfer is excluded from the model. Good agreement between experiment and simulation has been shown, and detailed analysis has been presented. This study expands our knowledge of the dynamics of the hot carrier population in semiconductors, which can be applied to further limit energy loss in solar cells.

42 ENGINEERING↗

Approximation of nearly-periodic symplectic maps via structure-preserving neural networks

A continuous-time dynamical system with parameter ε is nearly-periodic if all its trajectories are periodic with nowhere-vanishing angular frequency as ε approaches 0. Nearly-periodic maps are discrete-time analogues of nearly-periodic systems, defined as parameter-dependent diffeomorphisms that limit to rotations along a circle action, and they admit formal U(1) symmetries to all orders when the limiting rotation is non-resonant. For Hamiltonian nearly-periodic maps on exact presymplectic manifolds, the formal U(1) symmetry gives rise to a discrete-time adiabatic invariant. In this paper, we construct a novel structure-preserving neural network to approximate nearly-periodic symplectic maps. This neural network architecture, which we call symplectic gyroceptron, ensures that the resulting surrogate map is nearly-periodic and symplectic, and that it gives rise to a discrete-time adiabatic invariant and a long-time stability. This new structure-preserving neural network provides a promising architecture for surrogate modeling of non-dissipative dynamical systems that automatically steps over short timescales without introducing spurious instabilities.

97 MATHEMATICS AND COMPUTING↗

How will future climate change impact prescribed fire across the contiguous United States?

As of 2023, the use of prescribed fire to manage ecosystems accounts for more than 50% of area burned annually across the United States. Prescribed fire is carried out when meteorological conditions, including temperature, humidity, and wind speed are appropriate for its safe and effective application. However, changes in these meteorological variables associated with future climate change may impact future opportunities to conduct prescribed fire. In this study, we combine climate projections with information on prescribed burning windows for ecoregions across the contiguous United States (CONUS) to compute the number of days when meteorological conditions allow for the safe and effective application of prescribed fire under present-day (2006–2015) and future climate (2051–2060) conditions. The resulting projections, which cover 57% of all vegetated area across the CONUS, indicate fewer days with conditions suitable for prescribed burning across ecoregions of the eastern United States due to rising maximum daily temperatures, but opportunities increase in the northern and northwestern United States, driven primarily by rising minimum temperatures and declining wind speeds.

54 ENVIRONMENTAL SCIENCES↗

Coastal groundwater salinization impairs tree carbon–water balance

How coastal forest productivity varies with local nutrient availability and water supply remains a knowledge gap under climate change. In a two-decade field experiment manipulating fertilization and density in coastal pine forests, we show that a decade of growth enhancement by simulated sedimentary nutrient inputs has resulted in a striking reversal in growth and increased mortality risk as drought and sea level rise progressed. Recent groundwater salinization has further triggered a shift from nutrient to water limitation, causing severe stomatal closure and decoupling of tree carbon–water balance, which induces a negative intrinsic water use efficiency (iWUE)–growth relationship. Higher tree iWUE predicted sharper tree growth declines, and both nutrient enrichment and high stand density amplified this feedback, increasing the risk of hydraulic failure and mortality. These results suggest that a transient nutrient-stimulatory effect could drive further coastal forest degradation due to heightened belowground saltwater stress under sea-level rise.

Climate-change ecology↗

Modeling and Simulation of Nuclear Fuel Materials

We review the state of modeling and simulation of nuclear fuels with emphasis on the most widely used nuclear fuel, UO2. The hierarchical scheme presented represents a science-based approach to modeling nuclear fuels by progressively passing information in several stages from ab initio to continuum levels. Such an approach is essential to overcome the challenges posed by radioactive materials handling, experimental limitations in modeling extreme conditions and accident scenarios, and the small time and distance scales of fundamental defect processes. When used in conjunction with experimental validation, this multiscale modeling scheme can provide valuable guidance to development of fuel for advanced reactors to meet rising global energy demand.

multiscale modeling↗

Characterising local environments in high energy density Li-ion battery cathodes: a combined NMR and first principles study of LiFe x Co 1-x PO 4

Olivine-type LiCoPO4 (LCP) is a high energy density lithium ion battery cathode material due to the high voltage of the Co2+/Co3+ redox reaction. However, it displays a significantly poorer electrochemical performance than its more widely investigated isostructural analogue LiFePO4 (LFP). The co-substituted LiFexCo1-xPO4 olivines combine many of the positive attributes of each end member compound and are promising next-generation cathode materials. Here, the fully lithiated x = 0, 0.25, 0.5, 0.75 and 1 samples are extensively studied using 31P solid-state nuclear magnetic resonance (NMR). Practical approaches to broadband excitation and for the resolution of the isotropic resonances are described. First principles hybrid density functional calculations are performed on the Fermi contact shift (FCS) contributions of individual M–O–P pathways in the end members LFP and LCP and compared with the fitted values extracted from the LiFexCo1-xPO4 experimental data. Combining both data sets, the FCS for the range of local P environments expected in LiFexCo1-xPO4 have been calculated and used to assign the NMR spectra. Due to the additional unpaired electron in d6 Fe2+ as compared with d7 Co2+ (both high spin), LFP is expected to have larger Fermi contact shifts than LCP. However, two of the Co–O–P pathways in LCP give rise to noticeably larger shifts and the unexpected appearance of peaks outside the range delimited by the pure LFP and LCP 31P shifts. This behaviour contrasts with that observed previously in LiFexMn1-xPO4, where all 31P shifts lay within the LiMnPO4–LFP range. Although there are 24 distinct local P environments in LiFexCo1-xPO4, these group into seven resonances in the NMR spectra, due to significant overlap of the isotropic shifts. The local environments that give rise to the largest contributions to the spectral intensity are identified and used to simplify the assignment. This provides a tool for future studies of the electrochemically-cycled samples, which would otherwise be challenging to interpret.

36 MATERIALS SCIENCE↗

Dichotomy between frustrated local spins and conjugated electrons in a two-dimensional metal–organic framework

Dichotomy between local spins and conjugated electrons spawns various exotic physical phenomena, however, it has mostly been reported in three-dimensional (3D) inorganic systems. We demonstrate, for the first time, that a rare 2D metal–organic framework exhibits intriguing dichotomy behavior, which can be directly identified through scanning tunneling microscopy/spectroscopy (STM/STS). In a newly synthesized Cu-hexaiminobenzene [Cu 3 (HAB) 2 ], on the one hand, the Cu 2+ ions form an ideal S –1/2 antiferromagnetic (AFM) kagome lattice; on the other hand, the conjugated-electrons from the organic ligands produce a frustrated π x , y model on a honeycomb lattice, giving rise to completely dispersionless energy bands around the Fermi level that favour the ferromagnetic (FM) state. Remarkably, the frustrated local spins and conjugated electrons interact through a strong FM Hund's coupling, giving rise to a wide range of intriguing quantum phases. Furthermore, we propose that this dichotomy can be directly characterized through STM/STS measurements due to its special 2D nature, which provides a unique exciting platform to investigate the dichotomy of frustrated spins and electrons in a single lattice.

42 ENGINEERING↗

The influence of electrochemical cycling protocols on capacity loss in nickel-rich lithium-ion batteries

The transition towards electric vehicles and more sustainable transportation is dependent on lithium-ion battery (LIB) performance. Ni-rich layered transition metal oxides, such as NMC811 (LiNi 0.8 Mn 0.1 Co 0.1 O 2 ), are promising cathode candidates for LIBs due to their higher specific capacity and lower cost compared with lower Ni content materials. However, complex degradation mechanisms inhibit their use. In this work, tailored aging protocols are employed to decouple the effect of electrochemical stimuli on the degradation mechanisms in graphite/NMC811 full cells. Using these protocols, impedance measurements, and differential voltage analysis, the primary drivers for capacity fade and impedance rise are shown to be large state of charge changes combined with high upper cut-off voltage. Focused ion beam-scanning electron microscopy highlights that extensive microscale NMC particle cracking, caused by electrode manufacturing and calendering, is present prior to aging and not immediately detrimental to the gravimetric capacity and impedance. Scanning transmission electron microscopy electron energy loss spectroscopy reveals a correlation between impedance rise and the level of transition metal reduction at the surfaces of aged NMC811. The present study provides insight into the leading causes for LIB performance fading, and highlights the defining role played by the evolving properties of the cathode particle surface layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of dilution in ionic liquid supercapacitors

Room-temperature ionic liquids (RTILs) are synthetic electrolytes that have a large electrochemical stability window, making them attractive candidates for electric double-layer capacitor (EDLC) applications. Due to their high viscosities and low ionic conductivities, RTILs are often diluted with organic solvent for practical use. Here, we study the effects of dilution on the performance of RTIL EDLCs using a simple mean-field model. We find that dilution diminishes the unfavorable hysteresis that results from a spontaneous surface charge separation (SSCS). As a result, the RTIL concentration can be used to modulate the proximity to the SSCS transition, and maximize capacitance. The interplay between the concentration and the correlation strength gives rise to complex zero-potential phase behavior, including a tricritical point and a λ-line, very similar to the Blume–Capel dilute Ising model. Additionally, electrodes that are solvophilic aid in the prevention of SSCS by drawing solvent molecules to the electrode and displacing ions. Solvophilic electrodes give rise to a phase transition at finite potential where the surface charge rapidly increases with a small increase in potential, leading to a substantial increase in capacitance and energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Programming entropy production hotspots via interaction patterning

Dissipation in soft matter and living systems is highly heterogeneous, giving rise to complex local entropy production patterns. Recent work has identified the connection between local entropy production and locally extractable amount of work. This suggests that locally produced entropy can be recovered to power nanorobots and biological machines, prompting the need for efficient strategies to modulate and fine-tune local entropy production. In this work, we propose to program entropy production hotspots by leveraging local interaction patterns and test this approach in simulations of a fluid driven through a nanopore or past an obstacle. Here, the results show that patterning the surface of the pore with a repulsive patch gives rise to an entropy production hotspot around the patch, while an attractive patch leads to an entropy production cold spot. Varying the strength of the interaction and width of the patch enables modulating the hotness and extent of the hot spot. In flows past interaction patterned-obstacles, we show that the combined effects of steric hindrance and attraction allows to program a specific entropy production map, thereby opening the door to the precise powering of nanomachines.

Desgranges, Caroline [University of Massachusetts,↗

EMISSA (Exploring Millimeter Indicators of Solar-Stellar Activity): I. The initial millimeter–centimeter main-sequence star sample

Due to their wide wavelength coverage across the millimeter to centimeter (mm–cm) range and their increased sensitivity, modern interferometric arrays facilitate observations of the thermal and non-thermal radiation that is emitted from different layers in the outer atmospheres of stars. We study the spectral energy distribution (S obs (ν)) of main-sequence stars based on archival observations in the mm–cm range with the aim to study their atmospheric stratification as a function of stellar type. The main-sequence stars with significant detection in mm bands were identified in the ALMA Science Archive. These data were then complemented with spectral flux data in the extreme ultraviolet to cm range as compiled from various catalogues and observatory archives. We compared the resultant S obs (ν) of each star with a photospheric emission model (S mod (ν)) calculated with the PHOENIX code. The departures of S obs (ν) from S mod (ν) were quantified in terms of a spectral flux excess parameter (ΔS/S mod ) and studied as a function of stellar type. The initial sample consists of 12 main-sequence stars across a broad range of spectral types from A1 to M3.5 and the Sun-as-a-star as reference. The stars with T eff = 3000–7000 K (F–M type) showed a systematically higher S obs (ν) than S mod (ν) in the mm–cm range. Their ΔS/S mod exhibits a monotonic rise with decreasing frequency. The steepness of this rise is higher for cooler stars in the T eff = 3000–7000 K range, although the single fully convective star (T eff ~ 3000 K) in the sample deviates from this trend. Meanwhile, Sobs(ν) of the A-type stars agrees with S mod (ν) within errors. The systematically high ΔS/S mod in F–M stars indicates hotter upper atmospheric layers, that is, a chromosphere and corona in these stars, like for the Sun. The mm–cm ΔS/S mod spectrum offers a way to estimate the efficiency of the heating mechanisms across various outer atmospheric layers in main-sequence stars, and thereby to understand their structure and activity. We emphasise the need for dedicated surveys of main-sequence stars in the mm–cm range.

79 ASTRONOMY AND ASTROPHYSICS↗

Advanced Modeling and Simulation Methods for Evaluation of Thermal Neutron Scattering Materials

With the rise of interest in thermal neutron scattering data for advanced reactor, criticality safety, and shielding applications, new experimental data are required for evaluation of new materials or for re-evaluation (or validations) of previously evaluated materials. New experimental data are evaluated in a three-step process: (1) computing the phonon characteristics, (2) computing the dynamic structure factor (DSF) from the data, and (3) using the experimental setup to simulate the experimental data. All three steps have challenges, ranging from the need for a sufficiently general material simulation code—a processing code that can compute the corresponding DSF—to having a detailed layout of the instrument/beamline/facility where the data were measured. Whereas phonon characteristics of materials can be computed using various methods (molecular dynamics, density functional theory, etc.), a high-fidelity computation of the DSF and the simulation of the experiment based on the DSF is vital to the accuracy of the evaluation. The latter two steps can be achieved by using the two corresponding code systems developed by instrument scientists at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory: (1) OCLIMAX, a program that calculates the dynamic structure factor from DFT and MD simulation results, and (2) MCViNE, a Monte Carlo neutron ray-tracing program designed to simulate neutron scattering experiments. Recently, polyethylene and yttrium hydride were measured at the Wide Angular-Range Chopper (ARCS) and SEQUOIA instrument stations of the SNS. These experiments are simulated using the density functional theory code, the Cambridge Serial Total Energy Package (CASTEP), to compute its phonon characteristics (eigenvalues/vectors and PDOS), which is then processed using OCLIMAX to yield the DSF, and finally the data at each instrument station are simulated by the MCViNE for comparison to the measured data for evaluation. For comparison to conventional evaluation methods, the scattering data processed from OCLIMAX are compared against those processed from the LEAPR module of NJOY, and the results from MCViNE simulations are compared against previously used simplified beamline models implemented in the Monte Carlo N-Particle (MCNP) code.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Stochastic Analysis of Waterhammer and Applications in Reliability-Based Structural Design for Hydro Turbine Penstocks

Abstract: The randomness of transient events, and the variability in factors which influence the magnitudes of resultant pressure fluctuations, ensures that waterhammer and surges in a pressurized pipe system are inherently stochastic. To bolster and improve reliability-based structural design, a stochastic model of transient pressures is developed for water conveyance systems in hydropower plants. The statistical characteristics and probability distributions of key factors in boundary conditions, initial states and hydraulic system parameters are analyzed based on a large record of observed data from hydro plants in China; and then the statistical characteristics and probability distributions of annual maximum waterhammer pressures are simulated using Monte Carlo method and verified by the analytical probabilistic model for a simplified pipe system. In addition, the characteristics (annual occurrence, sustaining period and probability distribution) of hydraulic loads for both steady and transient states are discussed. Illustrating with an example of penstock structural design, it is shown that the total waterhammer pressure should be split into two individual random variable loads: the steady/static pressure and the waterhammer pressure rise during transients; and that different partial load factors should be applied to each individual load to reflect its unique physical and stochastic features. Particularly, the normative load (usually the unfavorable value at 95-percentage point) for steady/static hydraulic pressure should be taken from the probability distribution of its maximum values during the pipe's design life, while for waterhammer pressure rise, as the second variable load, the probability distribution of its annual maximum values is used to determine its normative load.

13 HYDRO ENERGY↗

Electrical properties of PbTe doped with BaF{sub 2}

We study here the p-type doping of PbTe with BaF{sub 2}. For the investigation, PbTe layers were grown on (111) BaF{sub 2} substrates by molecular beam epitaxy. The beam flux ratio between BaF{sub 2} and PbTe, defined as the nominal doping level, was varied from 0.02% to 1%. The hole density increases from 5x10{sup 17} to 1x10{sup 19} cm{sup -3} as the doping level rises from 0.02% to 0.4% and saturates at p{approx}10{sup 19} cm{sup -3} for higher levels. The saturation effect was attributed to self-compensation. The carrier concentration of all samples remained almost constant as the temperature was varied from 10 to 350 K, indicating that no thermal activation is present in the whole doping range. It suggests that the impurity level in PbTe doped with BaF{sub 2} remains resonant with the valence band, similar to the native defects behavior. The low-temperature mobility showed a pronounced reduction from 50 000 to 2 000 cm{sup 2}/V s as the doping level rises from 0.02% to 1%, mainly due to the substantial increase in the hole concentration. For temperatures higher than 80 K, the mobility was essentially limited by phonon scattering. Our results demonstrate that a controlled p-type doping of PbTe with BaF{sub 2} can be obtained up to 10{sup 19} cm{sup -3}.

36 MATERIALS SCIENCE↗