Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Reflectance of a vegetation canopy using the Adding method

A modified vegetation reflectance model based on the Adding method is presented as a means to measure the interaction of shortwave radiation within a vegetation canopy. The canopy is conceptualized with reflecting and transmitting leaf facets, with the leaf orientations described by a leaf slope distribution, thereby yielding scattering matrices for canopy layers. The model predictions, when compared with ground-truth measurements, show good agreement except at visible wavelengths, where overestimations are observed. Conditions under which the model satisfies the reciprocity theorem are defined. Extension of the model by including azimuth is indicated.

Cooper, K.↗
NASA NTRS1983

Reflection of electromagnetic waves at a biaxial-isotropic interface

The reflection of electromagnetic waves at a plane boundary between isotropic and biaxial media has been investigated using the kDB approach. The general case has been considered in which the principal dielectric axes of the biaxial medium are oriented at an arbitrary angle to the normal of the plane boundary. In general, two characteristic waves propagate in the biaxial medium, leading to coupling of vertical and horizontal polarizations in the reflected waves. Some special cases are illustrated. The results have applications to problems in remote sensing and integrated optics.

Njoku, E. G.↗
NASA NTRS1982

Satellite measurements of cloud reflectance and optical thickness

The cloud reflectance and the optical thickness have been computed with the aid of atmospheric models from the first eleven months (April 1970-February 1971) of backscattered ultraviolet (BUV) data over the Pacific Ocean. Both the cloud and the optical thickness are derived from the 380 nm channel by assuming that the entire IFOV (200 km) is filled by stratiform clouds. The analysis shows a large variability in the cloud reflectance in both the intertropic conversion zone (ITCZ) and the high latitudes. It is also found that for 90 percent of the time in the tropics, the clouds have an optical thickness of less than 10. An analysis of clouds with optical thickness between 10 and 20 shows that in the tropics the minimum frequency coincides with the dry zone at 2.5 deg S and the maximum frequency for clouds of optical thickness 10-20 is greater in summer than in winter and irrespective of the season; 50 percent of the time the clouds have an optical thickness less than 13.

Ahmad, Z.↗
NASA NTRS1983

A semiempirical method for analysis of the reflectance spectra of binary mineral mixtures

A simple semiempirical method is presented for determination of the spectral reflectance of a powdered binary mineral mixture. This technique uses a two-stream radiative transfer model (a modified Kubelka-Munk model) on a particulate medium of isotroic scatterers The particles are assumed to be much larger than the wavelength of light under consideration. This same method can be used to determine the relative proportion of components in a mixture for which the spectral reflectance is known. Binary mixtures of olivine, two pyroxenes, and magnetite are used to test this model. The theoretical and empirical results agree approximately within experimental errors.

Johnson, P. E.↗
NASA NTRS1983

Extension of a uniform canopy reflectance model to include row effects

The reflectance model for a uniform crop canopy is extended to include the effects of crops planted in rows. The effect of row structure is assumed to be caused by the variation in density of vegetation across rows rather than to a profile in canopy height. The calculation of crop reflectance using vegetation density modulation across rows follows a parallel procedure to that for a uniform canopy. Predictions using the row model for wheat show that the effect of changes in sun to row azimuth are greatest in Landsat Band 5 (red band) and can result in underestimation of crop biomass.

Suits, G. H.↗
NASA NTRS1983

The changes in leaf reflectance of sugar maple (Acer saccharum Marsh) seedlings in response to heavy metal stress

The effects of heavy metal stress on leaf reflectance of sugar maple seedlings (Acer saccharum Marsh) are examined. It is found that sugar maple seedlings treated with anomalous amounts of heavy metals in the rooting medium exhibited an increased leaf reflectance over the entire range of investigated wavelengths, from 475 to 1650 nm. These results conform to those of a previous investigation in the wavelengths from 475 to 660 nm, but tend to contradict the previous study in the near infrared wavelengths from 1000 to 1650 nm. The differences may possibly be due to different water regimes in the two investigations. Previously announced in STAR as N81-29729

Schwaller, M. R.↗
NASA NTRS1983

Evolution of ion distributions across the nearly perpendicular bow shock - Specularly and non-specularly reflected-gyrating ions

Data from ISEE 1 and 2 spacecraft were used to study the evolution of the ion distributions in the perpendicular terrestrial bow shock. The plasma data were taken during passage of the spacecraft downstream of and through the shock. Solar wind ions had velocities ranging from Mach 2-12.4, and reflected ions featured a relative density of 1-3 percent of the solar wind density at Mach 2 to 15-25 percent at Mach 8-12. Computer simulations have indicated that the ions provide essential dissipation at the shock and gyrate about the magnetic field lines in the plasma rest frame at a speed twice that of the normal incident solar wind flow. The ion density decreases by up to two orders of magnitude at the forward end of the foot of the shock profile, suggesting that the ions are reflected by the shock specularly, and may enhance downstream ion thermalization.

Sckopke, N.↗
NASA NTRS1983

Extended near-infrared emission from visual reflection nebulae

Extended near infrared (2 to 5 microns) emission was observed from three visual reflection nebulae, NGC 7023, 2023, and 2068. The emission from each nebula consists of a smooth continuum, which can be described by a greybody with a color temperature of 1000 K, and emission features at 3.3 and 3.4 microns. The continuum emission cannot be explained by free-free emission, reflected light, or field stars, or by thermal emission from grains, with commonly accepted ratios of infrared to ultraviolet emissivities, which are in equilibrium with the stellar radiation field. A possible explanation is thermal emission from grains with extremely low ratios of infrared to ultraviolet emissivities, or from grains with a temperature determined by mechanisms other than equilibrium radiative heating. Another possibility is continuum fluorescence. Previously announced in STAR N83-25629

Sellgren, K.↗
NASA NTRS1983

The effect of irradiation and reflectance variability on vegetation condition assessment

Surface reflectance and global irradiance variations across an imaged area determine the minimum signal difference from groups of pixels in different targets needed to discriminate them. The factors affecting such variations and their magnitudes are considered. The sensor output also depends upon the interaction of the spectral response of the sensor and the spectral upwelling radiance from the target. From a consideration of the spectral instrument responses of detectors in the Landsat multispectral scanners (MS), together with measured reflectance factors of a vegetative canopy stressed to different levels of severity, the feasibility of mapping and quantifying disease stress witlh Landsat vegetative indices (VINs) is demonstrated.

Duggin, M. J.↗
NASA NTRS1983

Target reflectance measurements for calibration of lidar atmospheric backscatter data

Wavelength and angular dependence of reflectances and depolarization in the 9-11 micron region are reported for four standard targets: flowers of sulfur, flame-sprayed aluminum, 20-grit sandblasted aluminum, and 400-grit silicon carbon sandpaper. Measurements are presented and compared using a CW CO2 grating-tunable laser in a laboratory backscatter apparatus, an integrating sphere, and a coherent pulsed TEA-CO2 lidar system operating in the 9-11 micron region. Reflectance theory related to the use of hard targets to calibrate lidar atmospheric backscatter data is discussed.

Kavaya, M. J.↗
NASA NTRS1985

Reflecting Schmidt/Littrow Prism Imaging Spectrometer

High resolution achieved with wide field of view. Imaging Spectrometer features off-axis reflecting optics, including reflecting "slit" that also serves as field flattener. Only refracting element is prism. By scanning slit across object or scene and timing out signal, both spectral and spatial information in scene are obtained.

Breckinridge, J. B.↗
NASA NTRS1982

Reflectance measurements of cotton leaf senescence altered by mepiquat chloride

Spectrophotometric reflectance measurements were made on plant-attached leaves to evaluate growth chamber-grown cotton leaf (Gossypium hirsutum L.) senescence (chlorophyll degradation as criterion) that was delayed by mepiquat chloride (1,1-dimethylpiperidinium chloride) rates of 0, 10, 40, 70, and 100 g a.i./ha. Mepiquat chloride (MC increased both chlorophyll and leaf water contents as compared with that of untreated leaves. Reflectance was inversely and linearly correlated (r = -0.873**) with eater content at the 1.65 micrometer wavelength and was inversely correlated (r = -0.812**) with chlorophyll concentration at the 0.55 micrometer wavelength but best fit a quadratic equation. Either wavelength measurement might be useful to remotely detect cotton leaf senescence or fields of MC-treated cotton plants.

Gausman, H. W.↗
NASA NTRS1984

Glass heating panels and method for preparing the same from architectural reflective glass

Electrodes are positioned in intimate contact with an outer surface of a thin electrically insulating protecting layer of architectural reflective glass. Application of a voltage of sufficient magnitude substantially destroys the insulating layer located beneath the electrodes. A subsequent application of voltage results in a passage of current through the underlying thin, light reflective metal or metal oxide layer and in concomitant output of heat.

Shlichta, P. J.↗
NASA NTRS1982

Calibration procedures for measurement of reflectance factor in remote sensing field research

A means by which measurements of the optical properties of crops and soils can be knowledgeably compared from site to site and instrument to instrument is presented in detail. The definition of bidirectional reflectance factor is reviewed and discussed. Procedures for field implementation are illustrated and discussed. Spectral and goniometric properties of laboratory and field reference surfaces are given. It is concluded that intelligent use of the bidirectional reflectance factor technique is an accurate and practical means to obtain the spectral, optical properties of crops and soils needed for advancements in agricultural remote sensing.

Robinson, B. F.↗
NASA NTRS1984

Comparison of the reflectance characteristics of polytetrafluoroethylene and barium sulfate paints

Preliminary results are presented of the directional reflectance measurements taken on two tetrafluorethylene (TFE) paints formulated with silicone binders. Both paints are found to be more Lambertian than barium sulfate paint and pressed powder, although the pigment to binder ratios for barium sulfate and TFE paints are about 133 and 3.3 to 1, respectively. The TFE paints exhibit total visible reflectances above 90 percent and offer surfaces that are not significantly affected by water.

Butner, C. L.↗
NASA NTRS1984

Snow reflectance from Landsat-4 Thematic Mapper

In California 75 percent of the agricultural water supply comes from the melting Sierra Nevada snowpack. Basin-wide spectral albedo measurements from the Landsat-4 Thematic Mapper (TM) could be used to better forecast the timing of the spring runoff, because these data can be combined with solar radiation calculations to estimate the net radiation balance. The TM is better-suited for this purpose than the Multispectral Scanner because of its larger dynamic range. Saturation still occurs in bands 1-4, but is severe only in TM1 (0.45-0.52 micron). Snow reflectance in TM2 (0.43-0.61 micron) is typical of the visible wavelength region, where reflectance is almost insensitive to crystal size but sensitive to contamination. TM4 (0.78-0.90 micron) allows estimation of effective optical grain size and thereby spectral extension throughout the near-infrared. TM5 (1.57-1.78 microns) can discriminate clouds from snow.

Dozier, J.↗
NASA NTRS1984

Reflectance of metallic indium for solar energy applications

An investigation has been conducted in order to compile quantitative data on the reflective properties of metallic indium. The fabricated samples were of sufficiently high quality that differences from similar second-surface silvered mirrors were not apparent to the human eye. Three second-surface mirror samples were prepared by means of vacuum deposition techniques, yielding indium thicknesses of approximately 1000 A. Both hemispherical and specular measurements were made. It is concluded that metallic indium possesses a sufficiently high specular reflectance to be potentially useful in many solar energy applications.

Bouquet, F. L.↗
NASA NTRS1984

Intraplate extensional tectonics of the eastern Basin-Range Inferencess on structural style from seismic reflection data, regional tectonics, and thermal-mechanical models of brittle-ductile deformation

Using 1500 km of industry-released seismic reflection data, surface geology, velocity models from refraction data, and earthquake data, the large extensional structures in the crust of the eastern Basin-Range and its transition into the Middle Rocky Mountains and Colorado Plateau have been studied. It is suggested that the close spatial correlation between normal faults and thrust fault segmentation along the Wasatch Front reflects major east-trending structural and lithological boundaries inherited from tectonic processes associated with the evolution of the cordilleran miogeocline, which began in the Precambrian.

Smith, R. B.↗