Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phased array”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Case study of active array feed compensation with sidelobe control for reflector surface distortion

The feasibility of electromagnetically compensating for reflector surface distortions has been investigated. The performance characteristics (gain, sidelobe levels, etc.) of large communication antenna systems degrade as the reflector surface distorts mainly due to thermal effects from a varying solar flux. The techniques described in this report can be used to maintain the design performance characteristics independently of thermal effects on the reflector surface. With the advent of monolithic microwave integrated circuits (MMIC), a greater flexibility in array-fed reflector system design can be achieved. MMIC arrays provide independent control of amplitude and phase for each of many radiating elements of the feed array. It is assumed that the surface characteristics (x,y,z, its first and second derivatives) under distorted conditions are known.

Acosta, R. J.↗

Cross-Array Antenna With Switched Steering

Selected phase shifting of feeds to antenna elements aims antenna beam. Antenna for Space Shuttle controlled in two dimensions by double-pole, double-throw switches antenna feeds. Switches control phasing of antenna elements by transposing transmission-line delay elements between feeds to pairs of elements located on opposite sides of antenna. Same principles can be applied to antennas with additional elements along each axis.

Iwasaki, R. S.↗

Hexagonal multiple phase-and-amplitude-shift-keyed signal sets

Selection of a particular signal set array for a bandwidth-constrained multiple phase-and-amplitude-shift-keyed (MPASK) communication system for a linear additive Gaussian noise channel requires consideration of factors such as average and/or peak power vs symbol error probability, signal amplitude dynamic range, simplicity of generation and detection, and number of bit errors per symbol error (Gray code properties). A simple technique is presented for generating and optimally detecting the honeycomb (hexagonal) signal set, i.e., the signal set that has the tightest sphere-packing properties. The symbol and bit error probability performance of this set is compared to other two-dimensional signal sets that have been investigated in the literature, and is shown to be slightly superior from an average power standpoint. The paper concludes with a comparison of all of these signal sets from the standpoint of the factors listed above.

Simon, M. K.↗

Phase-Insensitive Ultrasonic Testing System

Ultrasonic testing system developed for use in revealing hidden disbonds at rough, inaccessible interfaces between layers of material. Includes array of small piezoelectric transducers, receiving outputs electronically processed individually and combined in such way as to make system phase-insensitive, overcoming limitations imposed by phase-sensitivity. Development of present ultrasonic system and phase-insensitive-array technique which based motivated by need to detect disbonds under conditions of bondline inhibitor, liner, and fuel at ends of segments of solid rocket motor of space shuttle. Here, liner-to-fuel bondline very rough with respect to ultrasonic wavelength.

Madaras, Eric I.↗

Large Active Retrodirective Arrays for Space Applications

An active retrodirective array (ARA) electronically points a microwave beam back at the apparent source of an incident pilot signal. Retrodirectivity is the result of phase conjugation of the pilot signal received by each element of the array. The problem of supplying the correct phase reference to the phase conjugation circuit (PCC) associated with each element of the array is solved by central phasing. By eliminating the need for structural rigidity, central phasing confers a decisive advantage on ARA's as large spaceborne antennas. A new form of central phasing suitable for very large arrays is described. ARA's may easily be modified to serve both as transmitting and receiving arrays simultaneously. Two new kinds of exact, frequency translating PCC's are described. Such PCC's provide the ARA with input-output isolation and freedom from squint. The pointing errors caused by the radial and transverse components of the ARA's velocity, by the propagation medium, and by multipath are discussed. A two element ARA breadboard was built and tested at JPL. Its performance is limited primarily by multipath induced errors.

Chernoff, R. C.↗

Active feed array compensation for reflector antenna surface distortions

The feasibility of electromagnetic compensation for reflector antenna surface distortions is investigated. The performance characteristics of large satellite communication reflector antenna systems degrade as the reflector surface distorts, mainly due to thermal effects from solar radiation. The technique developed can be used to maintain the antenna boresight directivity and sidelobe level independent of thermal effects on the reflector surface. With the advent of monolithic microwave integrated circuits (MMIC), a greater flexibility in array fed reflector antenna systems can be achieved. MMIC arrays provide independent control of amplitude and phase for each of the many radiating elements in the feed array. By assuming a known surface distortion profile, a simulation study is carried out to examine the antenna performance as a function of feed array size and number of elements. Results indicate that the compensation technique can effectively control boresight directivity and sidelobe level under peak surface distortion in the order of tenth of a wavelength.

Acosta, Roberto J.↗

THE NuSTAR X-RAY SPECTRUM OF HERCULES X-1: A RADIATION-DOMINATED RADIATIVE SHOCK

We report on new spectral modeling of the accreting X-ray pulsar Hercules X-1. Our radiation-dominated radiative shock model is an implementation of the analytic work of Becker and Wolff on Comptonized accretion flows onto magnetic neutron stars. We obtain a good fit to the spin-phase-averaged 4–78 keV X-ray spectrum observed by the Nuclear Spectroscopic Telescope Array during a main-on phase of the Her X-1 35 day accretion disk precession period. This model allows us to estimate the accretion rate, the Comptonizing temperature of the radiating plasma, the radius of the magnetic polar cap, and the average scattering opacity parameters in the accretion column. This is in contrast to previous phenomenological models that characterized the shape of the X-ray spectrum, but could not determine the physical parameters of the accretion flow. We describe the spectral fitting details and discuss the interpretation of the accretion flow physical parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Quasi-phase-matching and second-harmonic generation enhancement in a semiconductor microresonator array using slow-light effects

We theoretically analyze the second-harmonic generation process in a sequence of unidirectionnaly coupled doubly resonant whispering gallery mode semiconductor resonators. By using a convenient design, it is possible to coherently sum the second-harmonic fields generated inside each resonator. We show that resonator coupling allows the bandwidth of the phase-matching curve to be increased with respect to single-resonator configurations simultaneously taking advantage of the resonant feature of the resonators. This quasi-phase-matching technique could be applied to obtain small-footprint nonlinear devices with large bandwidth and limited nonlinear losses. The results are discussed in the framework of the slow-light-effect enhancement of second-order optical nonlinearities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Topological and magnetic phase transitions in the bilayer Kitaev-Ising model

We investigate the phase diagram of a bilayer Kitaev honeycomb model with Ising interlayer interactions, deriving effective models via perturbation theory and performing Majorana mean-field theory calculations. We show that a diverse array of magnetic and topological phase transitions occur, depending on the direction of the interlayer Ising interaction and the relative sign of Kitaev interactions. When two layers have the same sign of the Kitaev interaction, a first-order transition from a Kitaev spin liquid to a magnetically ordered state takes place. The magnetic order points along the Ising axis and it is (anti)ferromagnetic for (anti)ferromagnetic Kitaev interactions. However, when two layers have opposite signs of the Kitaev interaction, we observe a notable weakening of magnetic ordering tendencies and the Kitaev spin liquid survives up to a remarkably larger interlayer exchange. Our mean-field analysis suggests the emergence of an intermediate gapped ℤ 2 spin-liquid state, which eventually becomes unstable upon vison condensation. The confined phase is described by a highly frustrated 120° compass model. We furthermore use perturbation theory to study the model with the Ising axis pointing along the $\hat{z}$ axis or lying in the 𝑥⁢𝑦 plane. In both cases, our analysis reveals the formation of one-dimensional Ising chains, which remain decoupled in perturbation theory, resulting in a subextensive ground-state degeneracy. Our results highlight the interplay between topological order and magnetic ordering tendencies in bilayer quantum spin liquids.

Kitaev model↗

Bayesian forecasts for dark matter substructure searches with mock pulsar timing data

Dark matter substructure, such as primordial black holes (PBHs) and axion miniclusters, can induce phase shifts in pulsar timing arrays (PTAs) measurements due to gravitational effects. In order to gain a more realistic forecast for the detectability of such models of dark matter with PTAs, we propose a Bayesian inference framework to search for phase shifts generated by PBHs and perform the analysis on mock PTA data. Furthermore, for most PBH masses the constraints on the dark matter abundance agree with previous (frequentist) analyses (without mock data) to $\mathcal{O}$(1) factors. This further motivates a dedicated search for PBHs (and dense small scale structures) in the mass range from 10 -8 M ⊙ to well above 10 2 M ⊙ with the Square Kilometer Array. Moreover, with a more optimistic set of timing parameters, future PTAs are predicted to constrain PBHs down to 10 -11 M ⊙ . Lastly, we discuss the impact of backgrounds, such as Supermassive Black Hole Mergers, on detection prospects, suggesting a future program to separate a dark matter signal from other astrophysical sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Ge{sub 1-x}Mn{sub x} heteroepitaxial quantum dots: Growth, morphology, and magnetism

Heteroepitaxial Ge{sub 1-x}Mn{sub x} quantum dots (QDs) were grown on Si (001) by molecular beam epitaxial co-deposition, with x = 0 to 0.10, in order to explore the interaction between Mn content, surface morphological evolution, and magnetism. Morphological evolution typical of the Ge/Si (001) system was observed, where the effect of Mn on surface morphology is surprisingly minimal at low Mn content, with no obvious surface morphological indicators of second phase formation. As the Mn content increases, secondary phase formation becomes evident, appearing to heterogeneously nucleate on or within Ge QDs. Still higher Mn concentrations lead to extensive second phase formation interspersed with an array of Ge QDs. Although ferromagnetism up to 220 K is observed, likely arising from intermetallic precipitates, there is no clear evidence for room-temperature ferromagnetism associated with a dilute magnetic solution phase.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Receive Mode Analysis and Design of Microstrip Reflectarrays

Traditionally microstrip or printed reflectarrays are designed using the transmit mode technique. In this method, the size of each printed element is chosen so as to provide the required value of the reflection phase such that a collimated beam results along a given direction. The reflection phase of each printed element is approximated using an infinite array model. The infinite array model is an excellent engineering approximation for a large microstrip array since the size or orientation of elements exhibits a slow spatial variation. In this model, the reflection phase from a given printed element is approximated by that of an infinite array of elements of the same size and orientation when illuminated by a local plane wave. Thus the reflection phase is a function of the size (or orientation) of the element, the elevation and azimuth angles of incidence of a local plane wave, and polarization. Typically, one computes the reflection phase of the infinite array as a function of several parameters such as size/orientation, elevation and azimuth angles of incidence, and in some cases for vertical and horizontal polarization. The design requires the selection of the size/orientation of the printed element to realize the required phase by interpolating or curve fitting all the computed data. This is a substantially complicated problem, especially in applications requiring a computationally intensive commercial code to determine the reflection phase. In dual polarization applications requiring rectangular patches, one needs to determine the reflection phase as a function of five parameters (dimensions of the rectangular patch, elevation and azimuth angles of incidence, and polarization). This is an extremely complex problem. The new method employs the reciprocity principle and reaction concept, two well-known concepts in electromagnetics to derive the receive mode analysis and design techniques. In the "receive mode design" technique, the reflection phase is computed for a plane wave incident on the reflectarray from the direction of the beam peak. In antenna applications with a single collimated beam, this method is extremely simple since all printed elements see the same angles of incidence. Thus the number of parameters is reduced by two when compared to the transmit mode design. The reflection phase computation as a function of five parameters in the rectangular patch array discussed previously is reduced to a computational problem with three parameters in the receive mode. Furthermore, if the beam peak is in the broadside direction, the receive mode design is polarization independent and the reflection phase computation is a function of two parameters only. For a square patch array, it is a function of the size, one parameter only, thus making it extremely simple.

Rengarajan, Sembiam↗

Implosion dynamics and K-shell x-ray generation in large diameter stainless steel wire array Z pinches with various nesting configurations

Nested stainless steel wire array variations were investigated on the 20 MA Z machine [R. B. Spielman et al., Phys. Plasmas 5, 2105 (1998)]. In order to reach experimentally observed electron temperatures near 3.8 keV and excite the K shell, these {approx}6.7 keV photon energy x-ray sources must be of large initial diameter (45-80 mm) which poses a concern for magnetic Rayleigh-Taylor instability growth. We discuss the implosion dynamics in these large diameter wire arrays, including an analysis of the ablation phase indicating that the prefill material is snowplowed at large radius. Nested array configurations with various mass and radius ratios are compared for instability mitigation and K-shell scaling. Degradation of the K-shell x-ray power and yield was observed for shots that did not have simultaneous implosion of the outer and inner wire arrays. Shots that were designed per this constraint exhibited K-shell yield scaling consistent with the model of J. W. Thornhill et al. [IEEE Trans. Plasma Sci. 34, 2377 (2006)] which had been benchmarked to single array results. This lends confidence to K-shell yield predictions using this model for future shots on the refurbished Z machine. Initial results employing a triple nested wire array to stabilize the large diameter implosion are also reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Construction of Fractal Order and Phase Transition with Rydberg Atoms

We propose the construction of a many-body phase of matter with fractal structure using arrays of Rydberg atoms. The degenerate low energy excited states of this phase form a self-similar fractal structure. This phase is analogous to the so-called “type-II fracton topological states.” The main challenge in realizing fractonlike models in standard condensed matter platforms is the creation of multispin interactions, since realistic systems are typically dominated by two-body interactions. In this work, we demonstrate that the van der Waals interaction and experimental tunability of Rydberg-based platforms enable the simulation of exotic phases of matter with fractal structures, and the study of a quantum phase transition involving a fractal ordered phase.

74 ATOMIC AND MOLECULAR PHYSICS↗

V-shaped resonators for addition of broad-area laser diode arrays

A system and method for addition of broad-area semiconductor laser diode arrays are described. The system can include an array of laser diodes, a V-shaped external cavity, and grating systems to provide feedback for phase-locking of the laser diode array. A V-shaped mirror used to couple the laser diode emissions along two optical paths can be a V-shaped prism mirror, a V-shaped stepped mirror or include multiple V-shaped micro-mirrors. The V-shaped external cavity can be a ring cavity. The system can include an external injection laser to further improve coherence and phase-locking.

47 OTHER INSTRUMENTATION↗

Extended-Range Passive RFID and Sensor Tags

Extended-range passive radio-frequency identification (RFID) tags and related sensor tags are undergoing development. A tag of this type incorporates a retroreflective antenna array, so that it reflects significantly more signal power back toward an interrogating radio transceiver than does a comparable passive RFID tag of prior design, which does not incorporate a retroreflective antenna array. Therefore, for a given amount of power radiated by the transmitter in the interrogating transceiver, a tag of this type can be interrogated at a distance greater than that of the comparable passive RFID or sensor tag of prior design. The retroreflective antenna array is, more specifically, a Van Atta array, named after its inventor and first published in a patent issued in 1959. In its simplest form, a Van Atta array comprises two antenna elements connected by a transmission line so that the signal received by each antenna element is reradiated by the other antenna element (see Figure 1). The phase relationships among the received and reradiated signals are such as to produce constructive interference of the reradiated signals; that is, to concentrate the reradiated signal power in a direction back toward the source. Hence, an RFID tag equipped with a Van Atta antenna array automatically tracks the interrogating transceiver. The effective gain of a Van Atta array is the same as that of a traditional phased antenna array having the same number of antenna elements. Additional pairs of antenna elements connected by equal-length transmission lines can be incorporated into a Van Atta array to increase its directionality. Like some RFID tags here-to-fore commercially available, an RFID or sensor tag of the present developmental type includes one-port surface-acoustic-wave (SAW) devices. In simplified terms, the mode of operation of a basic one-port SAW device as used heretofore in an RFID device is the following: An interrogating radio signal is converted, at an input end, from an electrical signal to an acoustic wave that propagates along a surface and encounters multiple reflectors suitably positioned along the surface. Upon returning to the input end, the reflected acoustic wave is re-converted to an electrical signal, which, in turn, is reradiated from an antenna. The distances between the reflectors in the SAW device and the corresponding times between reflections encode the identifying or sensory information onto the reradiated signal. The fundamental problem in the present development is how to combine a Van Atta antenna array (which is inherently a multiple-port device) and one or more one-port SAW device(s) into a single, compact, passive unit that can function as a retroreflective RFID tag. The solution is to use one or more hybrid, half-power 90 couplers. A basic unit of this type, shown in Figure 2, includes a half-power 90 hybrid coupler; two identical SAW devices (SAW1 and SAW2) connected to ports 3 and 4 of the coupler, respectively; and antenna elements connected to ports 1 and 2 of the coupler. Necessarily omitting details for the sake of brevity, it must suffice to report that the phase relationships among the coupler inputs and outputs are such as to couple the incident signal from the antenna elements to the SAW devices and couple the reflected signals from the SAW devices back to the antenna elements in the phase relationships required for a Van Atta array. Hence, the reradiated signal is automatically directed back toward the interrogating transceiver and contains identifying and/or sensory information encoded in time intervals between reflections.

Fink, Patrick W.↗