Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROXIMITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Andreev Reflection and Klein Tunneling in High-Temperature Superconductor-Graphene Junctions

Scattering processes in quantum materials emerge as resonances in electronic transport, including confined modes, Andreev states, and Yu-Shiba-Rusinov states. However, in most instances, these resonances are driven by a single scattering mechanism. Here, in this paper, we show the appearance of resonances due to the combination of two simultaneous scattering mechanisms, one from superconductivity and the other from graphene p-n junctions. These resonances stem from Andreev reflection and Klein tunneling that occur at two different interfaces of a hole-doped region of graphene formed at the boundary with superconducting graphene due to proximity effects from Bi 2 Sr 2 Ca 1 Cu 2 O 8+δ . The resonances persist with gating from p + -p and p-n configurations. The suppression of the oscillation amplitude above the bias energy which is comparable to the induced superconducting gap indicates the contribution from Andreev reflection. Our experimental measurements are supported by quantum transport calculations in such interfaces, leading to analogous resonances. Our results put forward a hybrid scattering mechanism in graphene–high-temperature superconductor heterojunctions of potential impact for graphene-based Josephson junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and magnetism in epitaxial Fe 1 + x VSb nanocomposite films

The combination of ferromagnetism and semiconducting behavior offers an avenue for realizing novel spintronics and spin-enhanced thermoelectrics. Here we demonstrate the synthesis of doped and nanocomposite half-Heusler Fe 1+x VSb films by molecular beam epitaxy. For dilute excess Fe (x < 0.1), we observe a decrease in the Hall electron concentration and no secondary phases in x-ray diffraction. Magnetotransport measurements suggest weak ferromagnetism that onsets at a temperature of T c ≈ 5 K. For higher Fe content (x > 0.1), ferromagnetic Fe nanostructures precipitate from the semiconducting FeVSb matrix. The Fe/FeVSb interfaces are epitaxial, as observed by transmission electron microscopy and x-ray diffraction. Further, magnetotransport measurements suggest proximity-induced magnetism in the FeVSb from the Fe/FeVSb interfaces, or superparamagnetically coupled Fe-rich clusters, at an onset temperature of T c ≈ 20 K.

36 MATERIALS SCIENCE↗

Boosting the Performance of Plug-and-Play Priors via Denoiser Scaling

Plug-and-play priors (PnP) is an image reconstruction framework that utilizes an image denoiser as an imaging prior. Unlike traditional regularized inversion, PnP does not require the prior to be expressible in the form of a regularization function. This flexibility enables PnP algorithms to exploit the most effective image denoisers, leading to their state-of-the-art performance in various imaging tasks. However, many powerful denoisers, such as the ones based on convolutional neural networks (CNNs), do not have tunable parameters that would allow controlling their influence within PnP. To address this issue, in this paper, we introduce a scaling parameter that adjusts the magnitude of the denoiser input and output. We theoretical justify the denoiser scaling from the perspectives of proximal optimization, statistical estimation, and consensus equilibrium. Finally, we provide numerical experiments demonstrating the ability of denoiser scaling to systematically improve the performance of PnP for denoising CNN priors that do not have explicitly tunable parameters.

Boosting↗

Microscale, printed LEDs for unusual lighting and display systems

Current technology development in light emitting diodes has enabled high efficiency operation, low energy consumption and lifetimes, thereby creating new possibilities in conventional display and lighting industry. Recent work is also creating more unusual uses in biomedicine and in sensing applications, where conformal contact over curvilinear surfaces is required. Here, ultrathin device geometries and optimized mechanical designs, including neutral mechanical plane layouts and serpentine interconnects, provide indicators and lighting modules with arbitrary shapes capable of integrated on nearly any type of substrates. Furthermore, biomedical devices such as light emitting suture threads, and glove-mounted optical proximity sensors demonstrate the versatility of this strategy and create great new opportunities.

42 ENGINEERING↗

Superconducting current in hybrid structures with an antiferromagnetic interlayer

It is shown experimentally that the superconducting current density in Nb/Au/Ca{sub 1-x}Sr{sub x}CuO{sub 2}/YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} hybrid superconducting heterostructures with a Ca{sub 1-x}Sr{sub x}CuO{sub 2} anti-ferromagnetic (AF) cuprate interlayer is anomalously high for interlayer thicknesses d{sub M} = 10-50 nm and the characteristic damping length for superconducting correlations is on the order of 10 nm. The experimental results are explained on the basis of theoretical analysis of a junction of two superconductors (S' and S) connected by a magnetic multilayer with the AF ordering of magnetization in the layers. It is shown that with such a magnetization ordering, anomalous proximity effect determined by the singlet component of the condensate wavefunction may take place. As a result, the critical currents in S'/I/AF/S and S'/I/N/S structures (I denotes an insulator, and N, the normal metal) may coincide in order of magnitude even when the thickness of the AF interlayer considerably exceeds the decay length of the condensate wavefunction in ferromagnetic layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron and spin transport in adiabatic quantum pumps based on graphene nanoribbons

The adiabatic quantum pump effect in double-barrier structures based on graphene nanoribbons has been analyzed numerically. The charge transmitted through the system in one cycle of variation of pumping potentials (barrier heights) has been calculated. This charge is shown to be quantized under certain conditions. The possibility of the generation of not only electron currents but also spin and purely spin ones is considered. In devices based on zigzag nanoribbons, the spin current emerges when taking into account their magnetic structure and applying a transverse electric field breaking the symmetry between the up and down spins. In devices based on armchair nanoribbons without any magnetic structure, this symmetry breaks when using a ferromagnetic insulator (deposited, for example, on the region between gates) through the proximity effect.

36 MATERIALS SCIENCE↗

Screening properties of multiply connected ferromagnet–superconductor hybrid structures

Superconducting phase transition temperature T{sub c} of a ferromagnet/superconductor (SF) hybrid structure consisting of a hollow superconducting (S) cylinder (shell) with the central part (core) filled with a ferromagnetic (F) metal has been analyzed on the basis of linearized Usadel equations. It has been shown that the proximity effect between the S and F metals, as well as the exchange interaction, may induce an inhomogeneous superconducting state with Δ ~ exp(iLθ + ipz), which is characterized by nonzero circulation of phase L and wavenumber p describing the Larkin–Ovchinnikov–Fulde–Ferrell (LOFF) instability along the cylinder axis. The transitions between the states with different values of L and p, which are accompanied by a nonmonotonic dependence of superconducting transition temperature T{sub c} and effective magnetic field penetration depth Λ into the SF structure on the characteristic size of the ferromagnetic region, have been investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced Magnetism and Anomalous Hall Transport through Two-Dimensional Tungsten Disulfide Interfaces

The magnetic proximity effect (MPE) has recently been explored to manipulate interfacial properties of two-dimensional (2D) transition metal dichalcogenide (TMD)/ferromagnet heterostructures for use in spintronics and valleytronics. However, a full understanding of the MPE and its temperature and magnetic field evolution in these systems is lacking. In this study, the MPE has been probed in Pt/WS 2 /BPIO (biphase iron oxide, Fe 3 O 4 and α-Fe 2 O 3 ) heterostructures through a comprehensive investigation of their magnetic and transport properties using magnetometry, four-probe resistivity, and anomalous Hall effect (AHE) measurements. Density functional theory (DFT) calculations are performed to complement the experimental findings. We found that the presence of monolayer WS 2 flakes reduces the magnetization of BPIO and hence the total magnetization of Pt/WS 2 /BPIO at T > ~120 K—the Verwey transition temperature of Fe 3 O 4 (T V ). However, an enhanced magnetization is achieved at T < T V . In the latter case, a comparative analysis of the transport properties of Pt/WS 2 /BPIO and Pt/BPIO from AHE measurements reveals ferromagnetic coupling at the WS 2 /BPIO interface. Our study forms the foundation for understanding MPE-mediated interfacial properties and paves a new pathway for designing 2D TMD/magnet heterostructures for applications in spintronics, opto-spincaloritronics, and valleytronics.

36 MATERIALS SCIENCE↗

(abstract) All Epitaxial Edge-geometry SNS Devices with Doped PBCO and YBCO Normal Layers

We will present our results on tapered-edge-geometry SNS weak link fabricated from c-axis oriented base-, counterelectrode and normal layers using a variety of processing conditions. To date, we have employed a variety of different normal materials (Co-doped YBCO, Y-doped PBCO, Ca-doped PBCO). We have been examining the junction fabrication process in detail and we will present our methods. In particular, we have been examining both epitaxial and non-epitaxial milling mask overlayers and we will present a comparison of both methods. These devices behave similar to the expectations of the resisively shunted junction model and conventional SNS proximity effect models but with some differences which will be discussed. We will present the detailed systematics of our junctions including device parameters versus temperature, rf and dc magnetic response for the various processing conditions.

epitaxial doped PBCO YBCO junction fabrication mil↗

Raven: An On-Orbit Relative Navigation Demonstration Using International Space Station Visiting Vehicles

Since the last Hubble Servicing Mission five years ago, the Satellite Servicing Capabilities Office (SSCO) at the NASA Goddard Space Flight Center (GSFC) has been focusing on maturing the technologies necessary to robotically service orbiting legacy assets-spacecraft not necessarily designed for in-flight service. Raven, SSCO's next orbital experiment to the International Space Station (ISS), is a real-time autonomous non-cooperative relative navigation system that will mature the estimation algorithms required for rendezvous and proximity operations for a satellite-servicing mission. Raven will fly as a hosted payload as part of the Space Test Program's STP-H5 mission, which will be mounted on an external ExPRESS Logistics Carrier (ELC) and will image the many visiting vehicles arriving and departing from the ISS as targets for observation. Raven will host multiple sensors: a visible camera with a variable field of view lens, a long-wave infrared camera, and a short-wave flash lidar. This sensor suite can be pointed via a two-axis gimbal to provide a wide field of regard to track the visiting vehicles as they make their approach. Various real-time vision processing algorithms will produce range, bearing, and six degree of freedom pose measurements that will be processed in a relative navigation filter to produce an optimal relative state estimate. In this overview paper, we will cover top-level requirements, experimental concept of operations, system design, and the status of Raven integration and test activities.

Rendezvous↗

Submarine record of volcanic island construction and collapse in the Lesser Antilles arc: First scientific drilling of submarine volcanic island landslides by IODPExpedition 340

IODP Expedition 340 successfully drilled a series of sites offshore Montserrat, Martinique and Dominica in the Lesser Antilles from March to April 2012. These are among the few drill sites gathered around volcanic islands, and the first scientific drilling of large and likely tsunamigenic volcanic island-arc landslide deposits. These cores provide evidence and tests of previous hypotheses for the composition and origin of those deposits. Sites U1394, U1399, and U1400 that penetrated landslide deposits recovered exclusively seafloor sediment, comprising mainly turbidites and hemipelagic deposits, and lacked debris avalanche deposits. This supports the concepts that i/ volcanic debris avalanches tend to stop at the slope break, and ii/ widespread and voluminous failures of preexisting low-gradient seafloor sediment can be triggered by initial emplacement of material from the volcano. Offshore Martinique (U1399 and 1400), the landslide deposits comprised blocks of parallel strata that were tilted or microfaulted, sometimes separated by intervals of homogenized sediment (intense shearing), while Site U1394 offshore Montserrat penetrated a flat-lying block of intact strata. The most likely mechanism for generating these large-scale seafloor sediment failures appears to be propagation of a decollement from proximal areas loaded and incised by a volcanic debris avalanche. These results have implications for the magnitude of tsunami generation. Under some conditions, volcanic island landslide deposits composed of mainly seafloor sediment will tend to form smaller magnitude tsunamis than equivalent volumes of subaerial block-rich mass flows rapidly entering water. Expedition 340 also successfully drilled sites to access the undisturbed record of eruption fallout layers intercalated with marine sediment which provide an outstanding high-resolution data set to analyze eruption and landslides cycles, improve understanding of magmatic evolution as well as offshore sedimentation processes.

58 GEOSCIENCES↗

Large earthquake processes in the northern Vanuatu subduction zone

Abstract The northern Vanuatu (formerly New Hebrides) subduction zone (11°S to 14°S) has experienced large shallow thrust earthquakes with M w > 7 in 1966 ( M S 7.9, 7.3), 1980 ( M w 7.5, 7.7), 1997 ( M w 7.7), 2009 ( M w 7.7, 7.8, 7.4), and 2013 ( M w 8.0). We analyze seismic data from the latter four earthquake sequences to quantify the rupture processes of these large earthquakes. The 7 October 2009 earthquakes occurred in close spatial proximity over about 1 h in the same region as the July 1980 doublet. Both sequences activated widespread seismicity along the northern Vanuatu subduction zone. The focal mechanisms indicate interplate thrusting, but there are differences in waveforms that establish that the events are not exact repeats. With an epicenter near the 1980 and 2009 events, the 1997 earthquake appears to have been a shallow intraslab rupture below the megathrust, with strong southward directivity favoring a steeply dipping plane. Some triggered interplate thrusting events occurred as part of this sequence. The 1966 doublet ruptured north of the 1980 and 2009 events and also produced widespread aftershock activity. The 2013 earthquake rupture propagated southward from the northern corner of the trench with shallow slip that generated a substantial tsunami. The repeated occurrence of large earthquake doublets along the northern Vanuatu subduction zone is remarkable considering the doublets likely involved overlapping, yet different combinations of asperities. The frequent occurrence of large doublet events and rapid aftershock expansion in this region indicate the presence of small, irregularly spaced asperities along the plate interface.

Cleveland, K. Michael↗

Cloud supersaturations from CCN spectra Hoppel minima

Abstract High‐resolution cloud condensation nucleus (CCN) spectral measurements in two aircraft field projects, Marine Stratus/Stratocumulus Experiment (MASE) and Ice in Clouds Experiment‐Tropical (ICE‐T), often showed bimodality that had previously been observed in submicrometer aerosol size distributions obtained by differential mobility analyzers. However, a great deal of spectral shape variability from very bimodal to very monomodal was observed in close proximity. Cloud supersaturation ( S ) estimates based on critical S , S c , at minimal CCN concentrations between two modes (Hoppel minima) were ascertained for 63% of 325 measured spectra. These cloud S were lower than effective S ( S eff ) determined by comparing ambient CCN spectra with nearby cloud droplet concentrations ( N c ). Averages for the polluted MASE stratus were 0.15 and 0.23% and for the cumulus clouds of ICE‐T 0.44 and 1.03%. This cloud S disagreement between the two methods might in part be due to the fact that Hoppel minima include the effects of cloud processing, which push CCN spectra toward lower S . Furthermore, there is less cloud processing by the smaller cloud droplets, which might be related to smaller droplets evaporating more readily. Significantly lower concentrations within the more bimodal spectra compared with the monomodal spectra indicated active physical processes: Brownian capture of interstitial CCN and droplet coalescence. Chemical cloud processing also contributed to bimodality, especially in MASE.

54 ENVIRONMENTAL SCIENCES↗

Observations of 14 CO 2 in ecosystem respiration from a temperate deciduous forest in Northern Wisconsin

We show that the 14 CO 2 composition of plant and soil respiration can be used to determine the residence time of photosynthetically fixed carbon before it is released back to the atmosphere. To estimate the residence time of actively cycled carbon in a temperate forest, we employed two approaches for estimating the Δ 14 CO 2 of ecosystem respiration (Δ 14 C-R eco ) at the Willow Creek AmeriFlux site in Northern Wisconsin, USA. Our first approach was to construct nighttime Keeling plots from subcanopy profiles of Δ 14 CO 2 and CO 2 , providing estimates of Δ 14 C-R eco of 121.7‰ in June and 42.0‰ in August 2012. These measurements are likely dominated by soil fluxes due to proximity to the ground level. Our second approach utilized samples taken over 20 months within the forest canopy and from 396 m above ground level at the nearby LEF NOAA tall tower site (Park Falls, WI). In this canopy-minus-background approach we employed a mixing model described by Miller and Tans (2003) for estimating isotopic sources by subtracting time-varying background conditions. For the period from May 2011 to December 2012 the estimated Δ 14 C-R eco using the Miller-Tans model was 76.8‰. Together, these Δ 14 C-R eco values represent mean R eco carbon ages of approximately 1–19 years. We also found that heterotrophic soil-respired Δ 14 C at Willow Creek was 5–38‰ higher (i.e., 1–10 years older) than predicted by the Carnegie-Ames-Stanford Approach global biosphere carbon model for the 1 × 1 pixel nearest to the site. Finally, this study provides much needed observational constraints of ecosystem carbon residence times, which are a major source of uncertainty in terrestrial carbon cycle models.

54 ENVIRONMENTAL SCIENCES↗

Ammonia and methane dairy emissions in the San Joaquin Valley of California from individual feedlot to regional scale

Agricultural ammonia (NH 3 ) emissions are highly uncertain, with high spatiotemporal variability and a lack of widespread in situ measurements. Regional NH 3 emission estimates using mass balance or emission ratio approaches are uncertain due to variable NH 3 sources and sinks as well as unknown plume correlations with other dairy source tracers. We characterize the spatial distributions of NH 3 and methane (CH 4 ) dairy plumes using in situ surface and airborne measurements in the Tulare dairy feedlot region of the San Joaquin Valley, California, during the NASA Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality 2013 field campaign. Surface NH 3 and CH 4 mixing ratios exhibit large variability with maxima localized downwind of individual dairy feedlots. The geometric mean NH 3 :CH 4 enhancement ratio derived from surface measurements is 0.15 ± 0.03 ppmv ppmv –1 . Individual dairy feedlots with spatially distinct NH 3 and CH 4 source pathways led to statistically significant correlations between NH 3 and CH 4 in 68% of the 69 downwind plumes sampled. At longer sampling distances, the NH 3 :CH 4 enhancement ratio decreases 20–30%, suggesting the potential for NH 3 deposition as a loss term for plumes within a few kilometers downwind of feedlots. Aircraft boundary layer transect measurements directly above surface mobile measurements in the dairy region show comparable gradients and geometric mean enhancement ratios within measurement uncertainties, even when including NH 3 partitioning to submicron particles. Individual NH 3 and CH 4 plumes sampled at close proximity where losses are minimal are not necessarily correlated due to lack of mixing and distinct source pathways. As a result, our analyses have important implications for constraining NH 3 sink and plume variability influences on regional NH 3 emission estimates and for improving NH 3 emission inventory spatial allocations.

54 ENVIRONMENTAL SCIENCES↗

Linking basin-scale and pore-scale gas hydrate distribution patterns in diffusion-dominated marine hydrate systems: DIFFUSION-DRIVEN HYDRATE GROWTH IN SANDS

The goal of this study is to computationally determine the potential distribution patterns of diffusion-driven methane hydrate accumulations in coarse-grained marine sediments. Diffusion of dissolved methane in marine gas hydrate systems has been proposed as a potential transport mechanism through which large concentrations of hydrate can preferentially accumulate in coarse-grained sediments over geologic time. Using one-dimensional compositional reservoir simulations, we examine hydrate distribution patterns at the scale of individual sand layers (1 to 20 m thick) that are deposited between microbially active fine-grained material buried through the gas hydrate stability zone (GHSZ). We then extrapolate to two- dimensional and basin-scale three-dimensional simulations, where we model dipping sands and multilayered systems. We find that properties of a sand layer including pore size distribution, layer thickness, dip, and proximity to other layers in multilayered systems all exert control on diffusive methane fluxes toward and within a sand, which in turn impact the distribution of hydrate throughout a sand unit. In all of these simulations, we incorporate data on physical properties and sand layer geometries from the Terrebonne Basin gas hydrate system in the Gulf of Mexico. We demonstrate that diffusion can generate high hydrate saturations (upward of 90%) at the edges of thin sands at shallow depths within the GHSZ, but that it is ineffective at producing high hydrate saturations throughout thick (greater than 10 m) sands buried deep within the GHSZ. As a result, we find that hydrate in fine-grained material can preserve high hydrate saturations in nearby thin sands with burial.

03 NATURAL GAS↗

A refined methodology for stress inversions of earthquake focal mechanisms: Refined Stress Inversion Methodology

We develop an improved methodology for reliable high-resolution inversions of focal mechanisms to background stress field orientation and stress ratio R in two or three dimensions. The earthquake catalog is declustered to remove events likely affected strongly by local stress interactions rather than reflecting the large-scale background stress field. The declustered data are discretized with the k-means algorithm into groups containing a number of focal mechanisms between a minimum number N min and 2N min . Synthetic tests indicate that N min ≈ 30 provides stable inversion results under different stress regimes and noise conditions when R ≈ 0.5, while N min ≈ 45 is needed for R near 0 or 1. Additional synthetic tests compare the performance of selecting the fault plane of each focal mechanism using (a) the plane with lowest misfit angle between the slip vector from the focal mechanism and shear traction from the stress tensor and (b) the plane with highest instability coefficient representing proximity to the optimally oriented fault for given stress field and friction coefficient. The instability criterion is found to provide more accurate inversion results under all tested stress regimes, stress ratios, and noise conditions. The refined inversion methodology combines selecting fault planes using the instability criterion iteratively with a damped simultaneous inversion of different focal mechanism groups. Results characterizing neighborhoods of discretized domains merged during the damped inversion provide high-resolution information independent of the discretization. Some aspects of the methodology are illustrated with focal mechanism data from the San Jacinto Fault Zone in Southern California.

58 GEOSCIENCES↗

Analysis of WRF extreme daily precipitation over Alaska using self‐organizing maps

Abstract We analyze daily precipitation extremes from simulations of a polar‐optimized version of the Weather Research and Forecasting (WRF) model. Simulations cover 19 years and use the Regional Arctic System Model (RASM) domain. We focus on Alaska because of its proximity to the Pacific and Arctic oceans; both provide large moisture fetch inland. Alaska's topography also has important impacts on orographically forced precipitation. We use self‐organizing maps (SOMs) to understand circulation characteristics conducive for extreme precipitation events. The SOM algorithm employs an artificial neural network that uses an unsupervised training process, which results in finding general patterns of circulation behavior. The SOM is trained with mean sea level pressure (MSLP) anomalies. Widespread extreme events, defined as at least 25 grid points experiencing 99th percentile precipitation, are examined using SOMs. Widespread extreme days are mapped onto the SOM of MSLP anomalies, indicating circulation patterns. SOMs aid in determining high‐frequency nodes, and hence, circulations are conducive to extremes. Multiple circulation patterns are responsible for extreme days, which are differentiated by where extreme events occur in Alaska. Additionally, several meteorological fields are composited for nodes accessed by extreme and nonextreme events to determine specific conditions necessary for a widespread extreme event. Individual and adjacent node composites produce more physically reasonable circulations as opposed to composites of all extremes, which include multiple synoptic regimes. Temporal evolution of extreme events is also traced through SOM space. Thus, this analysis lays the groundwork for diagnosing differences in atmospheric circulations and their associated widespread, extreme precipitation events.

Glisan, Justin M.↗