Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Connectivity and critical current density of in-situ processed MgB{sub 2} superconductors: Effect of excess Mg and non-carbon based additives

In a sequel to our previous paper (J. Appl. Phys. 113, 036908 (2013)), where we reported comprehensive analysis of inter-grain connectivity (A{sub F}), pinning, percolation threshold (P{sub c}), and anisotropy (γ) in a series of ex-situ processed MgB{sub 2}, we address the same issues in in-situ processed samples. MgB{sub 2} samples with stoichiometric composition, excess Mg (5 wt. %) and further 3 wt. % addition of various non-carbon based additives like nano-Ag, nano-Ni, and YBCO are synthesised by the in-situ route. Detailed investigations of X-ray diffraction, magnetization (M), and resistivity (ρ) as a function of temperature (T) and field (B) in the range 5–300 K and 0–8 T are carried out in all the samples. The resistive superconducting onset T{sub con} ∼ 38.6 ± 0.3 K and offset (where ρ goes to zero) T{sub c0} ∼ 38.1 ± 0.3 K of the samples stay nearly unchanged. The inter-grain connectivity (A{sub F}) of the samples varies between 11%–20%. All the additives result in a critical current density (J{sub c}) higher than the stoichiometric MgB{sub 2} sample, where the highest values (e.g., J{sub c}(1 T, 5 K) ∼ 1.2 × 10{sup 9} A/m{sup 2}) are observed for the sample with 5 wt. % excess Mg. The major findings based on quantitative analysis of ρ (T, B) and J{sub c} (B, T) data in all the samples are: (1) along with previously studied ex-situ samples, the J{sub c}(A{sub F}) shows a significant increase at A{sub F} ∼ 7%; (2) the irreversibility lines lie lower than the characteristic T{sub c0}(B) lines in the B-T phase diagram; (3) a universal core pinning (δl- and/or δT{sub c}- type) mechanism is revealed in the entire T range 5–30 K; and (4) typical values of P{sub c} ∼ 0.57 ± 0.04 is indicative of weak link networks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrodynamics of superconducting pnictide superlattices

It was recently shown that superlattices where layers of the 8% Co-doped BaFe{sub 2}As{sub 2} superconducting pnictide are intercalated with non superconducting ultrathin layers of either SrTiO{sub 3} or of oxygen-rich BaFe{sub 2}As{sub 2}, can be used to control flux pinning, thereby increasing critical fields and currents, without significantly affecting the critical temperature of the pristine superconducting material. However, little is known about the electron properties of these systems. Here, we investigate the electrodynamics of these superconducting pnictide superlattices in the normal and superconducting state by using infrared reflectivity, from THz to visible range. We find that multigap structure of these superlattices is preserved, whereas some significant changes are observed in their electronic structure with respect to those of the original pnictide. Our results suggest that possible attempts to further increase the flux pinning may lead to a breakdown of the pnictide superconducting properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetization jumps and exchange bias induced by a partially disordered antiferromagnetic state in (FeTiO{sub 3}){sub 0.9}-(Fe{sub 2}O{sub 3}){sub 0.1}

Magnetization jumps (MJs) and the exchange bias (EB) effect are simultaneously observed in the mixed-spin oxide (FeTiO{sub 3}){sub 0.9}-(Fe{sub 2}O{sub 3}){sub 0.1} at 2.0 K. Dc and ac susceptibility measurements confirm a reentrant spin glass phase with a partially disordered antiferromagnetic (PDA) state below the irreversibility temperature (T{sub ir} = 60 K). Antiferromagnetic (AFM) Fe{sup 3+} clusters are nested in AFM Fe{sup 2+} lattices forming a triangular lattice, in which 2/3 of the magnetic moments order antiferromagnetically with each other leaving the remaining 1/3 “confused.” This geometric frustration in the triangular lattice leads to a PDA state that is the ground state of the AFM triangular configuration. The PDA state, in the presence of a critical trigger field, evolves into a ferromagnetic (FM) state, and induces the AFM spins of the Fe{sup 2+} ions to enter a FM state, resulting in the MJs. Meanwhile, the FM spins of Fe{sup 2+} can serve as the pinned phase, and the AFM spins of Fe{sup 3+} can serve as the pinning phase, resulting in the EB effect. Thus, we point out that the PDA state is very likely to be at the origin of the MJs and the EB effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interface boundary conditions for dynamic magnetization and spin wave dynamics in a ferromagnetic layer with the interface Dzyaloshinskii-Moriya interaction

In this work, we derive the interface exchange boundary conditions for the classical linear dynamics of magnetization in ferromagnetic layers with the interface Dzyaloshinskii-Moriya interaction (IDMI). We show that IDMI leads to pinning of dynamic magnetization at the interface. An unusual peculiarity of the IDMI-based pinning is that its scales as the spin-wave wave number. We incorporate these boundary conditions into an existing numerical model for the dynamics of the Damon-Eshbach spin wave in ferromagnetic films. IDMI affects the dispersion and the frequency non-reciprocity of the travelling Damon-Eshbach spin wave. For a broad range of film thicknesses L and wave numbers, the results of the numerical simulations of the spin wave dispersion are in a good agreement with a simple analytical expression, which shows that the contribution of IDMI to the dispersion scales as 1/L, similarly to the effect of other types of interfacial anisotropy. Suggestions to experimentalists how to detect the presence of IDMI in a spin wave experiment are given.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-situ observation of domain wall motion in Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-PbTiO{sub 3} crystals

Various domain structures, including wave-like domains, mixed needle-like and laminar domains, typical embedded 90° and 180° domains, have been observed in unpoled rhombohedral, monoclinic, and tetragonal Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-PbTiO{sub 3} (PIN-PMN-PT) crystals by polarizing light microscope; while in poled tetragonal crystals, the parallel 180° domains were reversed and only vertical 90° domain walls were observed. For 0.24PIN-0.42PMN-0.34PT crystals with morphotropic phase boundary composition, the domain wall motion was in-situ observed as a function of applied electric field along crystallographic [100] direction. With increasing the electric field from 0 to 12 kV/cm, the rhombohedral (R) domains were found to change to monoclinic (M) domains and then to tetragonal (T) domains. The electric field-induced phase transition was also confirmed by X-ray diffraction and the temperature-dependent dielectric behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-scale investigation of point defects and hydrogen-solute atmospheres on the edge dislocation mobility in alpha iron

In this study, we present atomistic mechanisms of 1/2 [111](11{sup ¯}0) edge dislocation interactions with point defects (hydrogen and vacancies) and hydrogen solute atmospheres in body centered cubic (bcc) iron. In metals such as iron, increases in hydrogen concentration can increase dislocation mobility and/or cleavage-type decohesion. Here, we first investigate the dislocation mobility in the presence of various point defects, i.e., change in the frictional stress as the edge dislocation interacts with (a) vacancy, (b) substitutional hydrogen, (c) one substitutional and one interstitial hydrogen, (d) interstitial hydrogen, (e) vacancy and interstitial hydrogen, and (f) two interstitial hydrogen. Second, we examine the role of a hydrogen-solute atmosphere on the rate of local dislocation velocity. The edge dislocation simulation with a vacancy in the compression side of the dislocation and an interstitial hydrogen atom at the tension side exhibit the strongest mechanical response, suggesting a higher potential barrier and hence, the higher frictional stress (i.e., ∼83% higher than the pure iron Peierls stress). In the case of a dislocation interacting with a vacancy on the compressive side, the vacancy binds with the edge dislocation, resulting in an increase in the friction stress of about 28% when compared with the Peierls stress of an edge dislocation in pure iron. Furthermore, as the applied strain increases, the vacancy migrates through a dislocation transportation mechanism by attaining a velocity of the same order as the dislocation velocity. For the case of the edge dislocation interacting with interstitial hydrogen on the tension side, the hydrogen atom jumps through one layer perpendicular to the glide plane during the pinning-unpinning process. Finally, our simulation of dislocation interactions with hydrogen show first an increase in the local dislocation velocity followed by a pinning of the dislocation core in the atmosphere, resulting in resistance to dislocation motion as the dislocation moves though the hydrogen-solute atmospheres. With this systematic, atomistic study of the edge dislocation with various point defects, we show significant increase in obstacle strengths in addition to an increase in the local dislocation velocity during interaction with solute atmospheres. The results have implications for constitutive development and modeling of the hydrogen effect on dislocation mobility and deformation in metals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

First-principles study of structural, electronic, vibrational, dielectric and elastic properties of tetragonal Ba₂YTaO₆

We report first-principles study of structural, electronic, vibrational, dielectric, and elastic properties of Ba₂YTaO₆, a pinning material in high temperature superconductors (HTS), by using density functional theory. By using different exchange-correlation potentials, the accuracy of the calculated lattice constants of Ba₂YTaO₆ has been achieved with GGA-RPBE, since many important physical quantities crucially depend on change in volume. We have calculated the electronic band structure dispersion, total and partial density of states to study the band gap origin and found that Ba₂YTaO₆ is an insulator with a direct band gap of 3.50 eV. From Mulliken population and charge density studies, we conclude that Ba₂YTaO₆ have a mixed ionic-covalent character. Moreover, the vibrational properties, born effective charges, and the dielectric permittivity tensor have been calculated using linear response method. Vibrational spectrum determined through our calculations agrees well with the observed Raman spectrum, and allows assignment of symmetry labels to modes. We perform a detailed analysis of the contribution of the various infrared-active modes to the static dielectric constant to explain its anisotropy, while electronic dielectric tensor of Ba₂YTaO₆ is nearly isotropic, and found that static dielectric constant is in good agreement with experimental value. The six independent elastic constants were calculated and found that tetragonal Ba₂YTaO₆ is mechanically stable. Other elastic properties, including bulk modulus, shear modulus, Young's modulus, Poisson's ratio, and elastic anisotropy ratios are also investigated and found that Poisson's ratio and Young's modulus of Ba₂YTaO₆ are similar to that of other pinning materials in HTS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of critical current density in YBa{sub 2}Cu{sub 3}O{sub 7} films using a semiconductor ion implanter

An up-to-11-fold enhancement was observed in the in-magnetic-field critical current density (J{sub c}) in epitaxial YBa{sub 2}Cu{sub 3}O{sub 7} films on CeO{sub 2}-buffered SrTiO{sub 3} substrates by irradiation with 200- to 750-keV Si and 200-keV B ions. This enhancement indicates that ion beams in the range of 100 to 1000 keV, which are widely used for modifying the conductive properties of semiconducting materials, can significantly improve the vortex-pinning properties in second-generation superconducting wires. Also observed was a scaling relation between J{sub c} and the density of the vacancies (i.e., of Frenkel pairs) produced by the nuclear collisions between incident ions and target atoms, suggesting that this density is a key parameter in determining the magnitude of the J{sub c} enhancement. Also observed was an additional J{sub c} enhancement by a modification of the depth distribution of the vacancies, thus demonstrating the flexibility in controlling artificial pinning center (APC) properties in physical APC introduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The magnetic particle in a box: Analytic and micromagnetic analysis of probe-localized spin wave modes

The dipole field from a probe magnet can be used to localize a discrete spectrum of standing spin wave modes in a continuous ferromagnetic thin film without lithographic modification to the film. Obtaining the resonance field for a localized mode is not trivial due to the effect of the confined and inhomogeneous magnetization precession. We compare the results of micromagnetic and analytic methods to find the resonance field of localized modes in a ferromagnetic thin film, and investigate the accuracy of these methods by comparing with a numerical minimization technique that assumes Bessel function modes with pinned boundary conditions. We find that the micromagnetic technique, while computationally more intensive, reveals that the true magnetization profiles of localized modes are similar to Bessel functions with gradually decaying dynamic magnetization at the mode edges. We also find that an analytic solution, which is simple to implement and computationally much faster than other methods, accurately describes the resonance field of localized modes when exchange fields are negligible, and demonstrating the accessibility of localized mode analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deformation mechanism study of a hot rolled Zr-2.5Nb alloy by transmission electron microscopy. II. In situ transmission electron microscopy study of deformation mechanism change of a Zr-2.5Nb alloy upon heavy ion irradiation

The effect of heavy-ion irradiation on deformation mechanisms of a Zr-2.5Nb alloy was investigated by using the in situ transmission electron microscopy deformation technique. The gliding behavior of prismatic 〈a〉 dislocations has been dynamically observed before and after irradiation at room temperature and 300 °C. Irradiation induced loops were shown to strongly pin the gliding dislocations. Unpinning occurred while loops were incorporated into or eliminated by 〈a〉 dislocations. In the irradiated sample, loop depleted areas with a boundary parallel to the basal plane trace were found by post-mortem observation after room temperature deformation, supporting the possibility of basal channel formation in bulk neutron irradiated samples. Strong activity of pyramidal slip was also observed at both temperatures, which might be another important mechanism to induce plastic instability in irradiated zirconium alloys. Finally, (011{sup ¯}1)〈01{sup ¯}12〉 twinning was identified in the irradiated sample deformed at 300 °C.

36 MATERIALS SCIENCE↗

Effects of repetitive bending on the magnetoresistance of a flexible spin-valve

A positive magnetostrictive single layer (CoFe) and top-pinned spin-valve structure with positive magnetostrictive free (NiFe) and pinned (CoFe) layers were deposited on flexible polyethylene terephthalate film to investigate the changes in the magnetic properties in flexible environments, especially with a repetitive bending process. It was found that the stress, applied by repetitive bending, changes significantly the magnetic anisotropy of both layers in a single and spin-valve structure depending on the direction of applied stress. The changes in magnetic anisotropy were understood in terms of the inverse magnetostriction effect (the Villari effect) and the elastic recovery force from the flexibility of the polymer substrate. Repetitive bending with tensile stress transverse (or parallel) to the magnetic easy axis was found to enhance (or reduce) the magnetic anisotropy and, consequently, the magnetoresistance ratio of a spin-valve. The observed effects of bending stress in this study should be considered for the practical applications of electro-magnetic devices, especially magneto-striction sensor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An integrated wire harp and readout electronics inside vacuum

A wire harp is a well known instrument used in ion beam profile measurement and beam diagnostics. Till date, for beam instrumentation, the harp is placed inside the vacuum chamber or beam line in direct exposure to the beam profile to be measured, whereas the related readout electronics is placed outside somewhere at a convenient place. Here, a harp has been developed along with the readout electronics as an integrated part of it and both were placed inside the beam line vacuum (order of 10{sup −7} Torr) to make the system much simpler, easy to operate, and measure small beam current more accurately. The entire signal conversion and processing is done inside the vacuum unlike other systems; hence, the electronics is kept inside. This results in a lesser number (only 4 pin) of electrical connections (feedthrough) including power which otherwise would have required 32 feedthrough pins only for signal readout for a 13 × 13 (X × Y) channel harp. This paper describes a completely new approach to the design of a conventional beam harp widely used for beam instrumentation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dynamics of energy distribution in three channel alpha helix protein based on Davydov’s ansatz

An important aspect of many biological processes at molecular level is the transfer and storage mechanism of bioenergy released in the reaction of the hydrolysis of Adenosinetriphosphate (ATP) by biomacromolecule especially protein. Model of Soliton Davydov is a new break-through that could describe that mechanism. Here we have reformulated quantum mechanical the Davydov theory, using least action principle. Dynamical aspect of the model is analyzed by numerical calculation. We found two dynamical cases: the traveling and pinning soliton that we suggest they are related to the energy transfer and storage mechanism in the protein. Traveling and pinning soliton can be controlled by strength of coupling. In 3- channel approach, we found the breather phenomena in which its frequency is determined by interchannel coupling parameter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Native defects in Tl{sub 6}SI{sub 4}: Density functional calculations

Tl{sub 6}SI{sub 4} is a promising room-temperature semiconductor radiation detection material. Here, we report density functional calculations of native defects and dielectric properties of Tl{sub 6}SI{sub 4}. Formation energies and defect levels of native point defects and defect complexes are calculated. Donor-acceptor defect complexes are shown to be abundant in Tl{sub 6}SI{sub 4}. High resistivity can be obtained by Fermi level pinning by native donor and acceptor defects. Deep donors that are detrimental to electron transport are identified and methods to mitigate such problem are discussed. Furthermore, we show that mixed ionic-covalent character of Tl{sub 6}SI{sub 4} gives rise to enhanced Born effective charges and large static dielectric constant, which provides effective screening of charged defects and impurities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dependency of tunneling magneto-resistance on Fe insertion-layer thickness in Co{sub 2}Fe{sub 6}B{sub 2}/MgO-based magnetic tunneling junctions

For Co{sub 2}Fe{sub 6}B{sub 2}/MgO-based perpendicular magnetic tunneling junctions spin valves with [Co/Pd]{sub n}-synthetic-antiferromagnetic (SyAF) layers, the tunneling-magneto-resistance (TMR) ratio strongly depends on the nanoscale Fe insertion-layer thickness (t{sub Fe}) between the Co{sub 2}Fe{sub 6}B{sub 2} pinned layer and MgO tunneling barrier. The TMR ratio rapidly increased as t{sub Fe} increased up to 0.4 nm by improving the crystalline linearity of a MgO tunneling barrier and by suppressing the diffusion of Pd atoms from a [Co/Pd]{sub n}-SyAF. However, it abruptly decreased by further increasing t{sub Fe} in transferring interfacial-perpendicular magnetic anisotropy into the IMA characteristic of the Co{sub 2}Fe{sub 6}B{sub 2} pinned layer. Thus, the TMR ratio peaked at t{sub Fe} = 0.4 nm: i.e., 120% at 29 Ωμm{sup 2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bias-free lateral terahertz emitters—A simulation study

The design and performance of bias-free InN-based THz emitters that exploit lateral photocurrents is studied by means of numerical simulations. We use a drift-diffusion model with adjusted carrier temperatures and mobilities. The applicability of this approach is demonstrated by a comparison with results from Monte-Carlo simulations. We consider a simple but robust lateral emitter concept using metal stripes with two different thicknesses with one of them being thin enough to be transparent for THz radiation. This arrangement can be easily multiplexed and the efficiency of this concept has already been demonstrated by experiment for GaAs substrates. In the present study, we consider InN, which is known to be an efficient photo-Dember emitter because of its superior transport properties. Our main focus is on the impact of the emitter design on the emission efficiency assuming different operation principles. Both the lateral photo-Dember (LPD) effect and built-in lateral field effects are considered. The appropriate choice of the metal stripe and window geometry as well as the impact of surface Fermi level pinning are investigated in detail, and design guidelines for efficient large area emitters using multiplexed structures are provided. We find that InN LPD emitters do not suffer from Fermi level pinning at the InN surface. The optimum emission efficiency is found for LPD emitter structures having 200 nm wide illumination windows and mask stripes. Emitter structures in which lateral electric fields are induced by the metal mask contacts can have a considerably higher efficiency than pure LPD emitters. In the best case, the THz emission of such structures is increased by one order of magnitude. Their optimum window size is 1 μm without the necessity of a partially transparent set of mask stripes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bonding between graphene and MoS{sub 2} monolayers without and with Li intercalation

We performed density functional theory (DFT) calculations for a bi-layered heterostructure combining a graphene layer with a MoS{sub 2} layer with and without intercalated Li atoms. Our calculations demonstrate the importance of the van der Waals (vdW) interaction, which is crucial for forming stable bonding between the layers. Our DFT calculation correctly reproduces the linear dispersion, or Dirac cone, feature at the Fermi energy for the isolated graphene monolayer and the band gap for the MoS{sub 2} monolayer. For the combined graphene/MoS{sub 2} bi-layer, we observe interesting electronic structure and density of states (DOS) characteristics near the Fermi energy, showing both the gap like features of the MoS{sub 2} layer and in-gap states with linear dispersion contributed mostly by the graphene layer. Our calculated total DOS in this vdW heterostructure reveals that the graphene layer significantly contributes to pinning the Fermi energy at the center of the band gap of MoS{sub 2}. We also find that intercalating Li ions in between the layers of the graphene/MoS{sub 2} heterostructure enhances the binding energy through orbital hybridizations between cations (Li adatoms) and anions (graphene and MoS{sub 2} monolayers). Moreover, we calculate the dielectric function of the Li intercalated graphene/MoS{sub 2} heterostructure, the imaginary component of which can be directly compared with experimental measurements of optical conductivity in order to validate our theoretical prediction. We observe sharp features in the imaginary component of the dielectric function, which shows the presence of a Drude peak in the optical conductivity, and therefore metallicity in the lithiated graphene/MoS{sub 2} heterostructure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stable oscillation in spin torque oscillator excited by a small in-plane magnetic field

Theoretical conditions to excite self-oscillation in a spin torque oscillator consisting of a perpendicularly magnetized free layer and an in-plane magnetized pinned layer are investigated by analytically solving the Landau-Lifshitz-Gilbert equation. The analytical relation between the current and oscillation frequency is derived. It is found that a large amplitude oscillation can be excited by applying a small field pointing to the direction anti-parallel to the magnetization of the pinned layer. The validity of the analytical results is confirmed by comparing with numerical simulation, showing good agreement especially in a low current region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗