Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Studies on Structural and Dielectric Properties of ABi{sub 4}Ti{sub 4}O{sub 15} (A Ba, Sr and Pb) Ceramics

Bismuth Titanate based electroceramics of layered perovskite structures are technologically important materials for high temperature piezoelectric and ferroelectric applications, due to their high Curie temperature (675 deg. C), Stable piezoelectric response and excellent dielectric properties. The compounds ABi{sub 4}Ti{sub 4}O{sub 15} (A = Ba, Sr and Pb) belongs to Aurivillius family (n = 4) in which BaBi{sub 4}Ti{sub 4}O{sub 15} crystallizes in tetragonal I4/mmm space group, Sr Bi{sub 4}Ti{sub 4}O{sub 15} and PbBi{sub 4}Ti{sub 4}O{sub 15} crystallizes in orthorhombic space group A2{sub 1}am. In the present work ABi{sub 4}Ti{sub 4}O{sub 15} (A = Ba, Sr and Pb) ceramic samples are prepared through the solid state reaction by conventional mixed oxides by calcination at high temperature. Dielectric constant ({epsilon}'{sub r}) and Dielectric Loss (D) for all the compositions as a function of temperature measured from frequencies 100 Hz to 100 KHz using a HIOKI 3532-50 LCR meter. The dielectric constant increases gradually with an increase in temperature up to transition temperature (T{sub c,} K) and then decreases.

36 MATERIALS SCIENCE↗

Study Of Structural And Dielectric Properties Of Ni-Mg Ferrite Nanoparticles

Ferrite nanoparticles of basic composition Ni{sub 0.7}Mg{sub 0.3}Fe{sub 2-x}Al{sub x}O{sub 4}(0.0{<=}x{<=}0.5) were prepared through citrate gel method and characterized using XRD, TEM and dielectric spectroscopy techniques. The dielectric properties were studied as a function of frequency (42 Hz-5 MHz) at room temperature. The average particle size has been found between 8-17 nm. The dispersion in dielectric properties and ac conductivity ({sigma}{sub ac}), with frequency reveals that the dispersion is due to Maxwell-Wagner type of interfacial polarization in general and the hopping of charge between Fe{sup 2+} and Fe{sup 3+} as well as between Ni{sup 2+} and Ni{sup 3+} ions at B-sites. The dielectric loss tangent (tan {delta}) shows abnormal behavior for the compositions 0.3, 0.4 and 0.5 which has been explained in the light of Rezlescue model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The turbulent bremsstrahlung (plasma-maser) effect

Because of nonlinear interaction between particles and waves, energy conversion between waves of large frequency difference can occur without particle population inversion or resonant wave-wave interaction. The effect involves the nonresonant interaction of the plasma particles with a pair of plasma modes of large frequency difference, and wave energy is converted into particle energy. This effect can appear in laboratory as well as astrophysical plasmas and is important in determining the transport properties of weakly turbulent plasmas. Here, the most important aspects of the plasma-maser theory is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Propagation of terahertz waves in an atmospheric pressure microplasma with Epstein electron density profile

Propagation properties of terahertz (THz) waves in a bounded atmospheric-pressure microplasma (AMP) are analyzed in this study. A modified Epstein profile model is used to simulate the electron density distribution caused by the plasma sheaths. By introducing the dielectric constant of a Drude-Lorentz model and using the method of dividing the plasma into a series of subslabs with uniform electron density, the coefficients of power reflection, transmission, and absorption are derived for a bounded microplasma structure. The effects of size of microplasma, electron density profile, and collision frequency on the propagation of THz waves are analyzed numerically. The results indicate that the propagation of THz waves in AMPs depend greatly on the above three parameters. It is demonstrated that the THz wave can play an important role in AMPs diagnostics; meanwhile, the AMP can be used as a novel potential tool to control THz wave propagation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Defects in low-k organosilicate glass and their response to processing as measured with electron-spin resonance

Defect concentrations in low-k organosilicate glass films deposited on high-resistivity silicon were measured with electron-spin resonance. Bulk dangling bonds were detected. Both plasma exposure and ultraviolet exposure were used. During argon electron cyclotron resonance plasma exposure, ion and photon bombardment increased the measured defect concentrations. Ultraviolet lamp exposure was also shown to increase the defect concentrations. Dielectric samples with various dielectric constants were examined showing that as the value of the dielectric constant was lowered, the defect concentrations were shown to increase significantly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combined effects of bilayer structure and ion substitutions on bismuth ferrite thin films

To understanding the combined effects of bilayer structure and ion substitutions on electrical behavior of BiFeO{sub 3} thin films, the Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Zn{sub 0.10}O{sub 3}/Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Sn{sub 0.10}O{sub 3} bilayers with different thickness ratios were fabricated on SrRuO{sub 3}/Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrates by radio frequency sputtering. Their dielectric constant increases and the fatigue endurance becomes better with increasing Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Zn{sub 0.10}O{sub 3} thickness ratios. The bilayer with the thickness ratio of 210: 90 exhibits a high remanent polarization, and a better fatigue behavior is induced by higher driving electric fields and frequencies.

36 MATERIALS SCIENCE↗

Strong growth orientation dependence of strain relaxation in epitaxial (Ba,Sr)TiO{sub 3} films and the resulting dielectric properties

The growth orientation dependence of strain relaxation and the dielectric properties were investigated for (001)- and (111)-epitaxial (Ba,Sr)TiO{sub 3} films. The films were deposited on SrRuO{sub 3}/SrTiO{sub 3} and SrTiO{sub 3} substrates using rf magnetron sputtering. The residual strain was found to be remarkably different between the two orientations, although these lattice mismatches are identical; the strain relaxation of the (001)-epitaxial films is significantly slower than that of the (111)-epitaxial films and is promoted only when the growth rate is very low ({<=}5 nm/h). The observed orientation dependence is discussed with the surface energy for both growth orientations, which influences the growth mode of the films. Due to the large contrast of the strain in the (001)- and (111)-epitaxial films, the paraelectric to ferroelectric phase transition temperature of the (001)-epitaxial films is much higher than that of unstrained bulks, while the (111)-epitaxial films show a phase transition temperature corresponding to that of unstrained bulks regardless of the growth rates.

36 MATERIALS SCIENCE↗

Ion beam-assisted pulsed laser deposition of (Ba,Sr)(Ti,Zr)O{sub 3} films on Pt-Si substrates

Ion beam-assisted pulsed laser deposition with an Ar-oxygen ion mixture was used to prepare Ba{sub 0.6}Sr{sub 0.4}Ti{sub 0.7}Zr{sub 0.3}O{sub 3} (BSTZ) thin films on Pt-coated Si substrates. The ion beam with an anode voltage of 600 V was effective to reduce the thermal budget, i.e., to achieve similar crystallinity with approximately 100 deg. C lower deposition temperature compared to the cases without ionization. It was revealed that the dielectric properties (relative dielectric constant {epsilon}{sub r} and its electric field tunability), out-of-plane lattice parameter of (001)-oriented grains (a{sub 001}), and the existence of (110)-oriented grains are correlated with one another. Elongation of a{sub 001} was suppressed, resulting in large {epsilon}{sub r} values comparable with that of a ceramic bulk of the same composition, in the BSTZ films that contain (110)-oriented grains. Less volume of amorphous BSTZ region is supposed to be playing an important role for the bulklike properties of these BSTZ films.

36 MATERIALS SCIENCE↗

Magnetoelectric coupling study in multiferroic Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3} ceramics through small and large electric signal standard measurements

Multifunctional multiferroic materials such as the single phase compound Pb(Fe{sub 0.5}Nb{sub 0.5})O{sub 3} (PFN), where ferroelectric and antiferromagnetic order coexist, are very promising and have great interest from the academic and technological points of view. In this work, coupling of the ferroelectric and magnetic moments is reported. For this study, a combination of the small signal response using the impedance spectroscopy technique and the electromechanical resonance method with the large signal response through standard ferroelectric hysteresis measurement, has been used with and without an applied magnetic field. The measurements to determine the electrical properties of the ceramic were performed as functions of the bias and poling electric fields. A simultaneous analysis of the complex dielectric constant {epsilon}-tilde, impedance Z-tilde, electric modulus M-tilde, admittance Y-tilde, and the electromechanical parameters and coupling factors is presented. The results are correlated with a previous study of structural, morphological, small signal dielectric frequency-temperature response, and the ferroelectric hysteretic, magnetic and magnetodielectric behaviors. The observed shifts of the resonance and antiresonance frequency values can be associated with change of the ferroelectric domain size favored by the readjustment of the oxygen octahedron when the magnetic field is applied. From P-E hysteresis loops obtained without and with an external applied magnetic field, a dc magnetoelectric coupling effect with maximum value of 4 kV/cm T (400 mV/cm Oe) was obtained.

36 MATERIALS SCIENCE↗

Dielectric properties of aluminum silver alloy thin films in optical frequency range

The dielectric properties of direct current (dc) magnetron sputtering aluminum silver alloy films in optical frequency have been quantitatively studied by variable angle spectroscopic ellipsometry. The structure and surface topography of the alloy films were characterized using scanning probe microscopy and x-ray diffraction. The Drude-Lorentz model was used to simulate the dielectric function of Al-Ag alloy films. Meanwhile, the effective medium theory has been utilized for the treatment of surface roughness. We found that the interband transition around 1.5 eV can be shifted through a variable annealing temperature and a changeable silver percentage of Al-Ag alloys.

36 MATERIALS SCIENCE↗

A large polarization in Ce-modified bismuth ferrite thin films

Bi{sub 0.95}Ce{sub 0.05}FeO{sub 3} (BCFO) thin films were grown on SrRuO{sub 3}/TiO{sub 2}/SiO{sub 2}/Si(100) substrates via radio frequency sputtering. The BCFO thin film has a (111) orientation with a high phase purity. Improved dielectric behavior is observed for the BCFO thin film as compared with that of pure bismuth ferrite thin film. A large remanent polarization of 2P{sub r} {approx} 183.9 {mu}C/cm{sup 2} is induced in the BCFO thin film, owing to the (111) orientation and the introduction of Ce. The local phase decomposition induced by larger depolarization fields and the oxygen vacancies dominates the fatigue resistance of the BCFO thin film.

36 MATERIALS SCIENCE↗

Stopping power for a charged particle moving through three-dimensional nonideal finite-temperature electron gases

We investigate the interaction of a charged particle with nonideal 3D electron gases by using the quantum hydrodynamic (QHD) theory. The stopping power for a nonideal electron gas at a finite-temperature has been theoretically analyzed and numerically calculated. In our calculation, the impact of nonideality and temperature on stopping power is stressed and clearly presented. The QHD dielectric function is obtained and compared to random-phase approximation result. It is shown that the QHD theory can properly describe the stopping power for higher particle velocities greater than the Bohr velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-k (k=30) amorphous hafnium oxide films from high rate room temperature deposition

Amorphous hafnium oxide (HfO{sub x}) is deposited by sputtering while achieving a very high k{approx}30. Structural characterization suggests that the high k is a consequence of a previously unreported cubiclike short range order in the amorphous HfO{sub x} (cubic k{approx}30). The films also possess a high electrical resistivity of 10{sup 14} {Omega} cm, a breakdown strength of 3 MV cm{sup -1}, and an optical gap of 6.0 eV. Deposition at room temperature and a high deposition rate ({approx}25 nm min{sup -1}) makes these high-k amorphous HfO{sub x} films highly advantageous for plastic electronics and high throughput manufacturing.

36 MATERIALS SCIENCE↗

Controllable giant dielectric constant in AlO{sub x}/TiO{sub y} nanolaminates.

Dielectric materials exhibiting high dielectric constants play critical roles in a wide range of applications from microchip energy storage embedded capacitors for implantable biomedical devices to energy storage capacitors for a new generation of renewable energy generation/storage systems. Instead of searching for new materials, we demonstrate that giant dielectric constants can be achieved by integrating two simple oxides with low dielectric constants into nanolaminate structures. In addition, the obtained dielectric constant values are highly tunable by manipulating the sub-layer thicknesses of the component oxides to control the number of interfaces and oxygen redistribution. The work reported here opens a new pathway for the design and development of high dielectric constant materials based on the nanolaminate concept.

36 MATERIALS SCIENCE↗

Dielectric function and optical properties of quaternary AlInGaN alloys

The optical properties of quaternary Al{sub x}In{sub y}Ga{sub 1-x-y}N alloy films with 0.16<x<0.64 and 0.02<y<0.13 are presented. The (0001)-oriented AlInGaN layers were grown by metal-organic vapor phase epitaxy on thick GaN/sapphire templates. High-resolution x-ray diffraction measurements revealed the pseudomorphic growth of the AlInGaN films on the GaN buffer. Rutherford backscattering and wavelength-dispersive x-ray spectroscopy analysis were used in order to determine the composition of the alloys. The ordinary dielectric function (DF) of the AlInGaN samples was determined in the range of 1-10 eV by spectroscopic ellipsometry (SE) at room temperature (synchrotron radiation: BESSY II). The sharp onset of the imaginary part of the DF defines the direct absorption edge of the alloys. At higher photon energies, pronounced peaks are observed in the DF indicating a promising optical quality of the material. These features are correlated to the critical points of the band structure (van Hove singularities). An analytical model, which permits us to accurately describe the dielectric function (or optical constants) in the range of 1-10 eV, is also presented. The band-gap and high-energy interband transition values are obtained by fitting the experimental DF with the analytical model. The strain influence on the bandgap is evaluated by using the kxp formalism. Furthermore, an empirical expression is proposed which allows us to calculate the AlInGaN band-gap and high-energy inter-band transitions in the whole compositional range (x, y). The band-gap values obtained from the empirical expression are in good agreement with both the calculated ab initio and the experimental values determined by SE.

36 MATERIALS SCIENCE↗

Dielectric Studies on Swift Heavy Ions and Electron Irradiated Organic Single Crystal

Single crystals of 1-(4-methylphenyl)-3-(4,N,N-dimethylamino phenyl)-2-propen-1-one were irradiated with 72 MeV swift heavy ions of C-12 with different fluencies 5x10{sup 11}, 1x10{sup 12} and electrons with energy 8 MeV for a dose of 2.25 kGy. The changes in the dielectric properties of these crystals have been studied. The study shows that the dielectric constant increases first and then decreases with the increase of fluence. This variation has been discussed and possible explanations are given. The variation of dielectric loss and the ac conductivity indicates that there is some structural modification within the crystal due to irradiation. The electron irradiation induced ionic polarizibility within the crystal along the electron path, which is reflected in increase in dielectric constant and hence the conductivity.

36 MATERIALS SCIENCE↗

Dielectric Properties Of Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-PbTiO{sub 3} Solid Solution Synthesized By Solid State Reaction Route

Phase pure (1-x)Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-x PbTiO{sub 3} ceramics near morphotrophic phase boundary (x = 0.35) are prepared by conventional solid state reaction route, by adding 2 mol.% MgO. The dielectric properties of lead indium niobate-lead titanate ceramic are studied as a function of both temperature and frequency. For this composition the dielectric constant for 100 Hz increases from 1944 at room temperature to 1510 at Curie temperature(304 deg. C). The saturation polarization, measured at room temperature, is found to be 23.9 {mu}C/cm{sup 2} for 40 kV/cm.

36 MATERIALS SCIENCE↗