Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Thermal oxidative degradation reactions of perfluoroalklethers

The objective of this contract was to investigate the mechanisms operative in thermal and thermal oxidative degradation of Fomblin Z and hexafluoropropene oxide derived fluids and the effect of alloys and additives upon these processes. The nature of arrangements responsible for the inherent thermal oxidative instability of the Fomblin Z fluids has not been established. It was determined that this behavior was not associated with hydrogen end-groups or peroxy linkages. The degradation rate of these fluids at elevated temperatures in oxidizing atmospheres was found to be dependent on the surface/volume ratio. Once a limiting ratio was reached, a steady rate appeared to be attained. Based on elemental analysis and oxygen consumption data, -CF2OCF2CF2O-, not -CF2CF2O-, is one of the major arrangements present. The action of the M-50 and Ti(4 Al, 4 Mn) alloys was found to be much more drastic in the case of Fomblin Z fluids than that observed for the hexalfuoropropane oxide derived materials. The effectiveness of antioxidation/anticorrosion additives, P-3 and phospha-s-triazine, in the presence of metal alloys was very limited at 316 C; at 288 C the additives arrested almost completely the fluid degradation. The phospha-s-triazine appeared to be at least twice as effective as the P-3 compound; it also protected the coupon better. The Ti(4 Al, 4 Mn) alloy degraded the fluid mainly by chain scission processes; this took place to a much lesser degree with M-50.

Paciorek, K. L.↗

Oxygen vacancies at the surface of SrTiO{sub 3} thin films

The two-dimensional electron gas (2DEG) observed at the surface of oxide thin films and at the interface between two oxides has been widely discussed, but the mechanism responsible for this behavior is still not well understood. In this work, we study the properties of the SrTiO{sub 3} (001) surface and show that defects are necessary in order to explain this 2DEG. We study the properties of oxygen vacancies at the TiO{sub 2} and SrO terminated surface, and conclude they can explain the metallic behavior experimentally observed. There is a strong tendency for these vacancies to be localized at the surface, where the formation energy is less than 2.92 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dual roles of stepped surfaces: Catalytic initiators and stabilizers of oxygen-induced reconstructions

Understanding surface restructuring under reactive conditions is crucial for designing next-generation catalysts with enhanced activity and selectivity. Here, we employ in situ transmission electron microscopy to directly observe the dynamic behavior of Cu(100) and Cu(410) surfaces under both oxidizing and vacuum annealing conditions, revealing a complex interplay among surface crystallography, local oxygen coverage, Cu atom mobility, and step-edge reactivity. The stepped Cu(410) surface acts as an active site for O 2 dissociation, triggering the oscillatory transformation of the c(2 × 2)–O phase into the more stable (2$\sqrt2$ ×$\sqrt2$)R45°–O missing-row (MR) structure on the adjacent flat Cu(100) terrace. Under subsequent vacuum annealing, this same Cu(410) facet exhibits remarkable structural resilience, preserving the MR reconstruction and chemisorbed oxygen. In contrast, the Cu(100) surface undergoes reversible transitions from the MR structure back to the c(2 × 2)–O phase. These results highlight the critical role of surface morphology in directing both the formation and stability of oxygen-induced reconstructions, demonstrating that stepped surfaces serve dual roles as both catalytic initiators and structural stabilizers. Furthermore, this work offers atomic-level insights into the environment-responsive behavior of copper surfaces, establishing a mechanistic basis for designing Cu-based catalysts through facet-specific control of surface reactivity.

36 MATERIALS SCIENCE↗

Nanogranular SiO{sub 2} proton gated silicon layer transistor mimicking biological synapses

Silicon on insulator (SOI)-based transistors gated by nanogranular SiO{sub 2} proton conducting electrolytes were fabricated to mimic synapse behaviors. This SOI-based device has both top proton gate and bottom buried oxide gate. Electrical transfer properties of top proton gate show hysteresis curves different from those of bottom gate, and therefore, excitatory post-synaptic current and paired pulse facilitation (PPF) behavior of biological synapses are mimicked. Moreover, we noticed that PPF index can be effectively tuned by the spike interval applied on the top proton gate. Synaptic behaviors and functions, like short-term memory, and its properties are also experimentally demonstrated in our device. Such SOI-based electronic synapses are promising for building neuromorphic systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancing the pH sensitivity by laterally synergic modulation in dual-gate electric-double-layer transistors

The sensitivity of a standard ion-sensitive field-effect transistor is limited to be 59.2 mV/pH (Nernst limit) at room temperature. Here, a concept based on laterally synergic electric-double-layer (EDL) modulation is proposed in order to overcome the Nernst limit. Indium-zinc-oxide EDL transistors with two laterally coupled gates are fabricated, and the synergic modulation behaviors of the two asymmetric gates are investigated. A high sensitivity of ∼168 mV/pH is realized in the dual-gate operation mode. Laterally synergic modulation in oxide-based EDL transistors is interesting for high-performance bio-chemical sensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vapor-Phase Stabilization of Biomass Pyrolysis Vapors Using Mixed-Metal Oxide Catalysts

Mixed-metal oxides possess a wide range of tunability and show promise for catalytic stabilization of biomass pyrolysis products. For materials derived from layered double hydroxides, understanding the effect of divalent cation species and divalent/trivalent cation stoichiometric ratio on catalytic behavior is critical to their successful implementation. In this study, four mixed-metal oxide catalysts consisting of Al, Zn, and Mg in different stoichiometric ratios were synthesized and tested for ex-situ catalytic fast pyrolysis (CFP) using pine wood as feedstock. The catalytic activity and deactivation behavior of these catalysts were monitored in real-time using a lab-scale pyrolysis reactor and fixed catalyst bed coupled with a molecular beam mass spectrometer (MBMS), and data were analyzed by multivariate statistical approaches. In the comparison between Mg-Al and Zn-Al catalyst materials, we demonstrated that the Mg-Al materials possessed greater quantities of basic sites, which we attributed to their higher surface areas, and they produced upgraded pyrolysis vapors which contained less acids and more deoxygenated aromatic hydrocarbons such as toluene and xylene. However, detrimental impacts on carbon yields were realized via decarbonylation and decarboxylation reactions and coke formation. Given that the primary goals of catalytic upgrading of bio-oil are deoxygenation, reduction of acidity, and high carbon yield, these results highlight both promising catalytic effects of mixed-metal oxide materials and opportunities for improvement.

09 BIOMASS FUELS↗

Catalysis and the Nature of Mixed-metal Oxides at the Nanometer Level: Special Properties of MOx/TiO2(110) {M= V, W, Ce} Surfaces

To rationalize structure-reactivity relationships for mixed-metal oxide catalysts, well-defined systems are required. Studies involving the deposition of nanoparticles and clusters of VO{sub x}, CeO{sub x} and WO{sub x} on TiO{sub 2}(110) and other well-defined oxide surfaces have shown novel structures that have special chemical properties. Dimers of vanadia and ceria have been found on TiO{sub 2}(110), monomers of vanadia on CeO{sub 2}(111), and (WO{sub 3}){sub 3} clusters on TiO{sub 2}(110). The VO or WO groups present in VO{sub x}/TiO{sub 2}(110), VO{sub x}/CeO{sub 2}(111) and WO{sub x}/TiO{sub 2}(110) surfaces dislay a very high activity for the selective oxidation of alkanes and the dehydrogenation of alcohols. The non-typical coordination modes imposed by TiO{sub 2}(110) on ceria nanoparticles make possible the direct participation of this oxide in catalytic reactions and enhance the dispersion of metals on the titania substrate. Au/CeO{sub x}/TiO{sub 2}(110) surfaces display an extremely high catalytic activity for CO oxidation and the water-gas shift reaction. In general, the chemical behavior of the MOx/TiO{sub 2}(110) {l_brace}M = V, Ce or W{r_brace} surfaces reflects their unique structure at the nanometer level. These simple models can provide a conceptual framework for modifying or controlling the chemical properties of mixed-metal oxides and for engineering industrial catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Aluminum Oxide on the Performance of Ionic Liquid-Based Aluminum–Air Battery

The aluminum–air (or oxygen) battery has received intense attention in the past because of its excellent benefits such as low cost and high energy density, but due to the challenging issues such as hydrogen evolution and inactive oxide film formation on the Al surface, it could not be fully applied. In this study, 1-Ethyl 3-Methyl Imidazolium Chloride ([EmIm]Cl) and aluminum chloride (AlCl3) are applied to resolve the aforementioned issues. Ex situ component-level and in situ cell-level open circuit voltage (OCV) tests combined with the physics-based model analyses were conducted to investigate the electrochemical reaction behaviors of the Al–air cell. Especially, the effect of aluminum oxide formation on the anode- and cathode-side reactions were analyzed in detail. The oxide film formed at the Al surface strongly was found to significantly impede the electrochemical reaction at the surface, and the film growth was controlled by decreasing the surface tension by aggressive anions. In the cathode side, the aluminum oxide precipitated in the porous cathode electrode was found to decrease the porous reaction area and block reactant access into the reaction sites. The effects of O2 solubility in the electrolyte, initial porosity and thickness of the porous electrode are compared in detailed, and optimal thickness is suggested.

25 ENERGY STORAGE↗

Microstructure Evolution in Ion-Irradiated Oxidized Zircaloy-4 Studied with Synchrotron Radiation Microdiffraction and Transmission Electron Microscopy

The corrosion process (oxidation and hydriding) of zirconium alloy fuel cladding is one of the limiting factors on fuel rod lifetime, particularly for Zircaloy-4. The corrosion rate of this alloy shows indeed a great acceleration at high burnup in light water reactors (LWRs). Understanding the corrosion behavior under irradiation for this alloy is an important technological issue for the safety and efficiency of LWRs. In particular, understanding the effect of irradiation on the metal and oxide layers is a key parameter in the study of corrosion behavior of zirconium alloys. In this study, Zircaloy-4 samples underwent helium and proton ion irradiation up to 0.3 dpa, forming a uniform defect distribution up to 1 pm deep. Both as-received and precorroded samples were irradiated to compare the effect of metal irradiation to that of oxide layer irradiation. After irradiation, samples were corroded to study the impact of irradiation defects in the metal and in preexisting oxide layers on the formation of new oxide layers. Synchrotron X-ray microdiffraction and microfluorescence were used to follow the evolution of oxide crystallographic phases, texture, and stoichiometry both in the metal and in the oxide. In particular, the tetragonal oxide phase fraction, which has been known to play an important role in corrosion behavior, was mapped in both unirradiated and irradiated metals at the submicron scale and appeared to be significantly affected by irradiation. These observations, complemented with electron microscopy analyses on samples in carefully chosen areas of interest, were combined to fully characterize changes caused by irradiation in metal and oxide phases of both alloys.

ion-irradiation↗

Role of Catalyst Preparation on the Electrocatalytic Activity of Ni 1– x Fe x OOH for the Oxygen Evolution Reaction

Ni 1– x Fe x OOH thin films prepared via cathodic electrodeposition have been demonstrated to be highly active catalysts for the oxygen evolution reaction (OER) in basic media. Integration of these catalysts with light-absorbing semiconductors is required for photoelectrochemical fuel generation. However, the application of cathodic potentials required for typical electrochemical catalyst deposition limits the library of compatible photoanode materials. Sputter deposition of catalysts circumvents this limitation by enabling facile catalyst layering without cathodic potentials. In this work, we compare the structure and OER activity of sputter-deposited and electrodeposited Ni 1– x Fe x OOH thin films. Electrochemical cycling converts sputtered Ni 1-x Fe x metallic films to the desired oxides/(oxy)hydroxides. Both film preparation methods give catalysts with similar electrochemical behavior across all compositions. Additionally, OER activity is comparable between the deposition methods, with maximum activity for films with ~20% Fe content (320 mV overpotential at j = 10 mA cm -2 geometric). Electrochemical cycling to convert sputtered metallic Ni 1-x Fe x films to metal oxides/(oxy)hydroxides is found to lower the Fe/Ni ratio, while the electrodeposited films exhibit comparable Fe/Ni ratios before and after electrochemical cycling and characterization. Structurally, Fe is found to incorporate within the Ni(OH) 2 /NiOOH lattice for films formed through both sputter-deposition and electrodeposition. Layered films were also compared to codeposited 1:1 Fe/Ni films. It is found that, for layered films, an Fe top layer inhibits the electrochemical conversion of metallic Ni to Ni(OH) 2 /NiOOH, thus reducing the amount of Ni 1– x Fe x OOH OER-active phase formed. In contrast, migration of metals within Ni-on-top films occurs readily during electrochemical cycling, resulting in films that are structurally and electrochemically indistinguishable from codeposited Ni 1– x Fe x OOH. These findings enable direct application of Ni 1– x Fe x OOH sputtered films to a wider library of photoanodes for light-driven water-splitting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal–Organic Frameworks as a Tunable Platform to Deconvolute Stereoelectronic Effects on the Catalytic Activity of Thioanisole Oxidation

The local environment of a metal active site plays an important role in affecting catalytic activity and selectivity. In re-cent studies, tailoring the behavior of a molybdenum-based active site via modulation of the first coordination sphere has led to improved thioanisole oxidation performance, but disentangling electronic effects from steric influences that arise from these modifications is nontrivial, especially in heterogeneous systems. To this end, the tunability of metal–organic frameworks (MOFs) makes them promising scaffolds for controlling the coordination sphere of a heterogene-ous, catalytically-active metal site while offering additional, attractive features such as crystallinity and high porosity. Herein, we report a variety of MOF-supported Mo species, which were investigated for catalytic thioanisole oxidation to methyl phenyl sulfoxide and/or methyl phenyl sulfone using tert-butyl hydroperoxide (tBHP) as the oxidant. In particular, MOFs of contrasting node architectures were targeted, presenting a unique opportunity to investigate ste-reoelectronic control of Mo active sites in a systematic manner. A Zr 6 -based MOF, NU-1000, was employed along with its sulfated analog Zr 6 -based NU-1000-SO 4 to anchor a dioxymolybdenum species, which enabled examination of sup-port-mediated active site polarizability on catalytic performance. In addition, a MOF containing a mixed metal node, Mo-MFU-4l, was used to probe the stereoelectronic impact of an N-donor ligand environment on the catalytic activity of the transmetalated Mo center. Furthermore, characterization techniques including single crystal X-ray diffraction, were concomi-tantly used with reaction kinetic profiles to better comprehend the dynamics of different Mo active sites, thus correlat-ing structural change with activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anomalous magnetic behavior in the transition metal ions doped Cu{sub 2}O flower-like nanostructures

Cuprous oxide (Cu{sub 2}O) flower-like nanostructures doped with various metal ions i.e. Fe, Co, Ni and Mn have been synthesized by an organic phase solution method. The powder X-ray diffraction study clearly reveals them as single phase simple cubic cuprite lattice. Study of their magnetic properties have shown that these doped samples are ferromagnetic in nature; however, no such property was observed for the undoped Cu{sub 2}O sample. The magnitude of the ferromagnetic behavior was found to be dependent on the dopant metal ions amount, which increased consistently with its increase. As total magnetic moment contribution of the doped metal ions calculated was insignificant, it is believed to have originated from the induced magnetic moments at cation deficiency sites in the material, created possibly due to the disturbance of the crystal lattice by the dopant ions. The existence of the defects has been supported by photoluminescence spectra of the doped samples. -- Graphical abstract: Room temperature ferromagnetic behavior was observed in the Cu{sub 2}O nanoflowers doped with Fe, Co, Ni and Mn ions. Cation deficiencies formed due to dopant ions were possibly responsible for ferromagnetism. Display Omitted

36 MATERIALS SCIENCE↗

Tuning carrier density at complex oxide interface with metallic overlayer

We have systematically investigated the electronic transport properties of the LaAlO{sub 3}/SrTiO{sub 3} interfaces with several different metal capping layers. The sheet carrier density can be tuned in a wide range by the metallic overlayer without changing the carrier mobility. The sheet carrier density variation is found to be linearly dependent on the size of metal work function. This behavior is explained by the mechanism of the charge transfer between the oxide interface and the metal overlayer across the LaAlO{sub 3} layer. Our results confirm the existence of a built-in electric field in LaAlO{sub 3} film with an estimated value of 67.7 eV/Å. Since the metallic overlayer is essential for devices, the present phenomena must be considered for future applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tailoring the Selective Oxidation of Hydroxyl-Containing Compounds via Precisely Tuning the Hydrogen-Bond Strength of Catalyst H-Bond Acceptors

The unique performance of the enzyme is mainly achieved via weak interactions between the “outer coordination sphere” and the substrate. Inspired by this process, we developed 3D encapsulated-structure catalysts with hydrogen-bond engineering on the shell, which mimics the “outer coordination sphere” of an enzyme. Various hydrogen bond acceptors (C=O, S=O, and N–O groups) are imparted in the shell. Concentration-dependent 1H NMR, inverse-phase gas Chromatography (IGC) measurements, and DFT calculations underscore that the hydrogen bond strength between the acceptor groups and alcohol follows the order of C=O < S=O < N–O. The hydroxyl compound oxidation rate vs the hydrogen bond strength follows a volcano behavior, reminiscent of Sabatier’s principle. The performance variation among catalysts is attributed to the adsorption strength of the substrate. The proposed bioinspired design principle expands the scope of encapsulated catalysts, enabling fine regulation of catalytic activity through precise microenvironment control via weak interactions with substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effect of the Fin Shape and Thickness of the Buried Oxide on the DIBL Effect in an SOI FinFET

In this paper, we simulated the dependence of the effect of reducing the drain-induced barrier lowering on the thickness of a buried oxide layer in a finned (vertical) metal-oxide-semiconductor field effect transistor (FinFET) based on silicon-on-insulator technology. Three shapes of the fin with the rectangle, trapezoid, and triangle cross sections were considered. The drain-induced barrier lowering effect significantly depends on both the fin shape and the thickness of the buried oxide layer. The smallest drain-induced barrier lowering effect occurs when the thickness of the buried oxide layer is small for the fin of a triangular shape. This behavior of the drain-induced barrier lowering effect is strongly correlated with the behavior of the parasitic capacitance between a gate and a source.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fatigue Behavior of Coated Titanium Alloys

Advanced multi-component TiAlCrTaSiN-based multilayered coatings were developed and processed onto Ti-6Al-4V (Ti-6-4) and GammaMet PX (GMPX or TiAl) alloys by a magnetron-enhanced physical vapor deposition technique. The coatings have recently been in development with the goal of improving advanced titanium alloy, turbine engine component durability and oxidation-erosion resistance. In this work, the performance of the multi-component coating system (including the outer layer nitride based coating and inner TiAlCrSi oxidation barrier bond coat) was studied, and the coating's influence on the fatigue behavior of the titanium-based alloys were compared. Although the multi-component coating was initially optimized to improve the coating's high temperature oxidation and erosion resistance, the lower ductility nitride-based coating needs further work on microstructure or composition to improve its mechanical stress resistance and strain tolerance for use in cyclically loaded, turbine blade operating conditions. This is particularly true for GMPX and other γ-TiAl alloys because these intermetallic titanium alloys have limited ductility and are very sensitive to defects such as coating cracks. However, the inner layer TiAlCrSi-coating had better adhesion and ductility, and may be a suitable choice to improve the oxidation resistance of titanium alloys.

Oxidation Barrier Coatings↗

Interfacial structure and bonding mechanism of weld seams during porthole die extrusion of aluminum alloy profiles

Highlights: • Interfacial structures and bonding mechanisms of extrusion welds were studied. • Interfacial grain boundaries, amorphous layers and voids were found. • Bonding mechanisms in the absence/presence of a gas-pocket were proposed. • Voids closure, oxide films breaking and grain boundaries migration were discussed. - Abstract: Fine nanostructures of bonding interfaces of weld seams formed by porthole die extrusion in the absence/presence of a gas-pocket behind the bridge of the extrusion die were systematically studied to understand the underlying interfacial bonding mechanisms. Interfacial grain boundaries, nanoscale amorphous layers, and three kinds of new interfacial structures were found. Specifically, it was found that, in the absence of a gas-pocket behind the bridge, there are two distinctly different interfacial structures. For the first kind of bonding interface, interfacial grain boundaries exist in contact areas and micro-voids exist in non-contact areas. For the second kind of bonding interface, there are no interfacial grain boundaries in contact areas and only nanoscale micro-voids exist in non-contact areas. In the presence of a gas-pocket behind the bridge, nanoscale voids and amorphous layers exist at the bonding interface. It was also found that the formation of gas-pockets can be avoided by increasing the depth of the welding chamber, and the increase of the welding chamber's depth and extrusion speed also contributes to the volume reduction of micro-voids and the migration of grain boundaries at the bonding interface, so as to improve the welding quality of weld seams. Based on the experimental findings, two interfacial bonding mechanisms corresponding to the absence/presence of a gas-pocket are proposed. The specific behavior of micro-asperities contact, micro-voids closure, oxide films breaking and interfacial grain boundaries migration are described, and the solid-state bonding process during porthole die extrusion is revealed from the micro-nano scales.

77 NANOSCIENCE AND NANOTECHNOLOGY↗