Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Navigation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Alternative approach to multisensor navigation

An alternative to the Kalman filtering technique, based on logical rather than numerical techniques, is presented. It can be implemented on one or more microprocessors (with a fixed communications protocol between the individual microprocessors); requires only limited preprocessing of the input data; can have its constituent subsystem changed without major revision to the combiner as new or better navigation techniques, such as the global positioning system (GPS) or Loran-C, become available; and tolerates a wide variety of sensor, hardware, and software errors. The basic structure of the method and results of simulations of its performance in the presence of errors common to low-cost sensors (such as VOR or basic Omega) are presented, along with a discussion of possible extensions.

Cannon, M. J.↗

Analysis of estimation algorithms for autonomous navigation with TDRSS data

Estimation techniques for onboard orbit determination using Tracking and Data Relay Satellite System (TDRSS) data are investigated. The two user satellite orbits studied are similar to Landsat-D (near-circular, 700 kilometers altitude, near-polar inclination). The following estimation algorithms are identified as candidates for use in autonomous navigation: (1) the extended Kalman filter with process noise, (2) the EKF with consider parameters, (3) the sequential Kalman filter with consider parameters, and (4) the batch least-squares differential correction technique. The candidate estimators are evaluated with respect to their performance with both baseline and worst TDRSS measurement errors and tracking configurations.

Dunham, J.↗

An analysis of the adaptability of Loran-C to air navigation

The sources of position errors characteristics of the Loran-C navigation system were identified. Particular emphasis was given to their point on entry as well as their elimination. It is shown that the ratio of realized accuracy to theoretical accuracy of the Loran-C is highly receiver dependent.

Littlefield, J. A.↗

Navigation Using X-Ray Pulsars

Approximately one dozen X-ray pulsars are presently known which emit strong stable pulses with periods of 0.7 to approximately 1000 s. By comparing the arrival times of these pulses at a spacecraft and at the Earth (via an Earth orbiting satellite), a three dimensional position of the spacecraft can be determined. One day of data from a small onboard X-ray detector yields a three dimensional position accurate to approximately 150 km. This accuracy is independent of spacecraft distance from the Earth. Present techniques for determining the two spacecraft coordinates other than range measure angles and thus degrade with increasing spacecraft range. Thus navigation using X-ray pulsars will always be superior to present techniques in measuring these two coordinates for sufficiently distant spacecraft. At present, the break even point occurs near the orbit of Jupiter. The Crab pulsar can also be used to obtain one transverse coordinate with an accuracy of approximately 20 km.

Chester, T. J.↗

Tracking and Data Relay Satellite System (TDRSS) navigation with DSN radio metric data

The use of DSN radiometric data for enhancing the orbit determination capability for TDRS is examined. Results of a formal covariance analysis are presented which establish the nominal TDRS navigation performance and assess the performance improvement based on augmenting the nominal TDRS data strategy with radiometric data from DSN sites.

Ellis, J.↗

Terminal area automatic navigation, guidance, and control 1: Automatic rollout, turnoff, and taxis

A study developed for the TCV B-737, designed to apply existing navigation aids plus magnetic leader cable signals and develop breaking and reverse thrust guidance laws to provide for rapid automated rollout, turnoff, and taxi to reduce runway occupation time for a wide variety of landing conditions for conventional commercial-type aircraft, is described. Closed loop guidance laws for braking and reverse thrust are derived for rollout, turnoff, and taxi, as functions of the landing speed, the desired taxi speed and the distance to go. Brake limitations for wet runway conditions and reverse thrust limitations are taken into account to provide decision rules to avoid tire skid and to choose an alternate turnoff point, farther down the runway, to accommodate extreme landing conditions.

Pines, S.↗

Onboard navigation - The near-earth options

This paper summarizes anticipated onboard navigation accuracies and user system characteristics for near-earth spacecraft. Alternate onboard systems configurations using inputs from the Tracking and Data Relay Satellite System (TDRSS) and the DOD NAVSTAR Global Positioning System (GPS) are described. Initial simulation results indicate that TDRSS will provide accuracies of 100 meters or less, and GPS can permit user spacecraft orbit determination to within 10 meters. Specific GPS user equipment developments for Landsat-D and Shuttle are outlined, along with future low-cost versions of these systems.

Kurzhals, P. S.↗

Application of unconnected phase narrowband Delta VLBI to deep space navigation

Unconnected phase narrowband Delta VLBI data strategies are evaluated for enhancing deep space cruise navigation and for rapidly redetermining the spacecraft trajectory after a midcourse correction maneuver. Results of a covariance analysis study are presented for a Jupiter bound spacecraft based on a simulated data strategy consisting of daily 10 minute narrowband scans from two baselines augmented with conventional two way range and Doppler passes. For post-maneuver recovery, the narrowband strategy achieves a factor of two improvement in orbit determination performance. Cruise OD performance is also significantly enhanced due to the ability of the narrowband data to accurately sense the orientation of the orbital plane.

Ellis, J.↗

Use of Faraday-rotation data from beacon satellites to determine ionospheric corrections for interplanetary spacecraft navigation

Faraday-rotation data from the linearly polarized 137-MHz beacons of the ATS-1, SIRIO, and Kiku-2 geosynchronous satellites are used to determine the ionospheric corrections to the range and Doppler data for interplanetary spacecraft navigation. The JPL operates the Deep Space Network of tracking stations for NASA; these stations monitor Faraday rotation with dual orthogonal, linearly polarized antennas, Teledyne polarization tracking receivers, analog-to-digital converter/scanners, and other support equipment. Computer software examines the Faraday data, resolves the pi ambiguities, constructs a continuous Faraday-rotation profile and converts the profile to columnar zenith total electron content at the ionospheric reference point; a second program computes the line-of-sight ionospheric correction for each pass of the spacecraft over each tracking complex. Line-of-sight ionospheric electron content using mapped Faraday-rotation data is compared with that using dispersive Doppler data from the Voyager spacecraft; a difference of about 0.4 meters, or 5 x 10 to the 16th electrons/sq m is obtained. The technique of determining the electron content of interplanetary plasma by subtraction of the ionospheric contribution is demonstrated on the plasma torus surrounding the orbit of Io.

Royden, H. N.↗

Auxiliary subprograms for calculating the navigational parameters of artificial Earth satellites. FORTRAN IV

Subprograms for transforming coordinates and time, for determining the position of the Moon and Sun, and for calculating the atmosphere and disturbances, which are specified by anomalies of the Earth's gravitational field are described. The subprograms are written in FORTRAN IV and form a major part of the package of applied programs for calculating the navigational parameters of artificial Earth satellites.

Prokhorenko, V. I.↗

Field operations with cesium clocks in HF navigation systems

Networks of HF phase comparison marine navigation stations employing cesium clocks are discussed. The largest permanent network is in the Gulf of Mexico where some fourteen base stations are continuously active and others are activated as needed. These HF phase comparison systems, which operate on a single transmission path, require a clock on the mobile unit as well. Inventory consists of upwards of 70 clocks from two different manufacturers. The maintenance of this network as an operating system requires a coordinated effort involving clock preparation, clock environment control, station performance monitoring and field service.

Christy, E. H.↗

A Loran-C prototype navigation receiver for general aviation

The design, fabrication and evaluation of a prototype Loran-C receiver is described. Hardware, and microcomputer programming for addition of area navigation capability are reported. The receiver is an envelope processor, offering simplicity of RF processor circuitry.

Lilley, R. W.↗

Study of the global positioning system for maritime concepts/applications: Study of the feasibility of replacing maritime shipborne navigation systems with NAVSTAR

A geostationary reference satellite (REFSAT) that broadcasts every four seconds updated GPS satellite coordinates was developed. This procedure reduces the complexity of the GPS receiver. The economic and performance payoffs associated with replacing maritime stripborne navigation systems with NAVSTAR was quantified and the use of NAVSTAR for measurements of ocean currents in the broad ocean areas of the world was evaluated.

Winn, C. B.↗

A Loran-C prototype navigation receiver for general aviation

Prototype equipment was developed for flight evaluation which provides enroute navigation in both latitude-longitude and rho-theta coordinates. The nonprecision approach capabilities of this equipment was evaluated. The antenna/preamplifier coupler, the RF processor, tracking loop hardware, tracking loop software, and the video output are discussed. Laboratory and flight test results are evaluated.

Lilley, R. W.↗

Evaluation of Loran-C enroute navigation and non-precision approaches within the State of Vermont

Results obtained in completing 257 nonprecision approaches and 44 data flights are discussed. The flights were initiated in the summer months and extended through four seasons and practically all weather conditions typical of the northeastern U.S. A preliminary assessment of the available data indicates that Loran-C signals are suitable as a means of navigation during enroute, terminal, and nonprecision approach operations and that the performance exceeds the minimum accuracy criteria specified by the applicable FAA advisory circular. Enroute operations are found to remain within + or - 0.75 nm of the desired track, compared with the requirement of + or - 2.5 nm. Terminal operations remained within + or - 0.65 nm of the desired track, compared with the FAA circular's requirement of + or - 1.5 nm; the nonprecision final approach operations were within the limit of + or - 0.6 nm for all operations.

Mackenzie, F. D.↗

Flight evaluation of Loran-C for general aviation area navigation

This paper reports on a flight evaluation of Loran-C which was part of a long range study of area navigation systems for general aviation. Tests involved two different Loran-C receivers, 6 different aircraft, and a variety of antennas. Uncorrected position fixes were typically accurate to one quarter mile. With measured corrections, repeatability was good to within 200 ft. Signal reliability was 99.7%. The receiver was not sensitive to atmospheric noise. The time difference grid demonstrated a long term stability of 0.3 microsecond. Vertical whip and ADF E-field antennas were found suitable for airborne use. Loran-C was found satisfactory for instrument approaches to runways at general aviation airports where published latitude-longitude coordinates were available. Accuracy was further improved by using locally measured Loran-C time difference coordinates.

Hollister, W. M.↗

Aerocapture - Guidance, navigation, and control

Aerocapture is a concept for inserting a spacecraft into orbit about a target planet. The energy required for orbit insertion is obtained from natural resources present at or near the target body, thereby reducing the amount of propellant which must be carried onboard. Specifically, the transfer from a hyperbolic flyby trajectory to a desired bound orbit is effected by aerodynamic lift and drag forces acting on the spacecraft during controlled flight through the atmosphere of either the target planet or a nearby satellite. A survey is provided of the trajectory guidance, navigation, and control aspects of aerocapture, and a summary is given of the results of a number of preliminary studies concerning certain of these aspects. The investigation has additional significance in connection with the current interest in aeroassisted orbital transfer vehicles, which may be used in conjunction with the Space Shuttle.

Mease, K. D.↗

Deep Space Navigation with Noncoherent Tracking Data

Navigation capabilities of noncoherent tracking data are evaluated for interplanetary cruise phase and planetary (Venus) flyby orbit determination. Results of a formal covariance analysis are presented which show that a combination of one-way Doppler and delta DOR yields orbit accuracies comparable to conventional two-way Doppler tracking. For the interplanetary cruise phase, a tracking cycle consisting of a 3-hour Doppler pass and delta DOR (differential one-way range) from two baselines (one observation per overlap) acquired 3 times a month results in 100-km orbit determination accuracy. For reconstruction of a Venus flyby orbit, 10 days tracking at encounter consisting of continuous one-way Doppler and delta DOR sampled at one observation per overlap is sufficient to satisfy the accuracy requirements.

Ellis, J.↗