Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Models, Structural”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Simulation of Device Parameters of High Efficiency Multicrystalline Silicon Solar Cells

The results of the simulation of the reported experimental results of high efficiency multicrystalline silicon (mc-Si) solar cells, using PC1D software, are reported in this study. Results obtained by various groups have been incorporated and compared in this study. The highest efficiency reported so far for mc-Si solar cells is 20{center_dot}4% and 17-18% by research laboratories and commercial houses, respectively. The efficiency can be further enhanced if passivation characteristics on both the front and back surface are improved. The role of back surface recombination has become more significant in light of the use of thin mc-Si wafers by the solar cell industry. Based on the passivation characteristics and considering the understanding of the past three decades of studies, the authors have proposed and simulated a structure for mc-Si solar cells to improve the performance of the same. The results of our modeled structure of mc-Si solar cell show an efficiency of 21{center_dot}88% with short-circuit current density, J{sub sc} = 39{center_dot}39 mA/cm2, and open circuit voltage, V{sub oc} = 0{center_dot}666 V.

14 SOLAR ENERGY↗

Closing the loop: model-predictive control for a closed-circuit reverse osmosis system

This article presents a model-predictive controller (MPC) for the maximization of the energy efficiency of a closed-circuit desalination reverse osmosis (CCRO) system. CCRO is a process for producing drinking water that is based on a cyclic operation with the following two phases: (a) filtration and (b) drain. In this article, we test model predictive control for optimal control of this process. The most important features of our approach are as follows: (a) the selection of a model structure that enables reliable forecasts of the filtration phase (up to 3 h), (b) an on-line model calibration strategy that ensures model forecast reliability, and (c) the satisfaction of equipment safety and operational constraints on the selected setpoints. We challenge this through deliberate introduction of changes in the unmeasured feed concentration and the applied constraints. Our results indicate that frequent model parameter updates are critical to maintain model reliability for MPC purposes. In addition, we illustrate that parameter identifiability is not guaranteed and that deliberate variation in flow rates is necessary even though the process never operates in steady state. Finally, MPC can compute flow rate setpoints that maximize the energy efficiency of the CCRO process while satisfying the applicable equipment and safety constraints.

closed-circuit reverse osmosis↗

A comparison of two types of structural optimization procedures for satisfying flutter requirements

A comparison is made of results obtained from mathematical programming and optimality criteria procedures for the minimum-mass design of typical aircraft wing structures to satisfy prescribed flutter requirements. The mathematical programming method is based on an interior penalty function approach. A rigorous optimality criterion and an intuitive optimality criterion based on uniform strain energy density are considered. An intuitive resizing procedure is used for both optimality criterion solutions. All results are calculated using the same computer program, changing only the optimization procedure. Both high- and low-aspect-ratio wings are examined. Finite elements are used for structural modeling, and the generalized coordinates for the flutter solution are based on the natural vibration modes of the structure.

Haftka, R. T.↗

The Snowmelt-Runoff Model (SRM) user's manual

A manual to provide a means by which a user may apply the snowmelt runoff model (SRM) unaided is presented. Model structure, conditions of application, and data requirements, including remote sensing, are described. Guidance is given for determining various model variables and parameters. Possible sources of error are discussed and conversion of snowmelt runoff model (SRM) from the simulation mode to the operational forecasting mode is explained. A computer program is presented for running SRM is easily adaptable to most systems used by water resources agencies.

Martinec, J.↗

FLEXAN (version 2.0) user's guide

The FLEXAN (Flexible Animation) computer program, Version 2.0 is described. FLEXAN animates 3-D wireframe structural dynamics on the Evans and Sutherland PS300 graphics workstation with a VAX/VMS host computer. Animation options include: unconstrained vibrational modes, mode time histories (multiple modes), delta time histories (modal and/or nonmodal deformations), color time histories (elements of the structure change colors through time), and rotational time histories (parts of the structure rotate through time). Concurrent color, mode, delta, and rotation, time history animations are supported. FLEXAN does not model structures or calculate the dynamics of structures; it only animates data from other computer programs. FLEXAN was developed to aid in the study of the structural dynamics of spacecraft.

Stallcup, Scott S.↗

Analysis of virtual passive controllers for flexible space structures

The dynamics of flexible spacecraft are not usually well known before launch. This makes it important to develop controllers for such systems that can never be destabilized by perturbations in the structural model. Virtual passive controllers, or active vibration absorbers, possess this guaranteed stability property; they mimic a fictitious flexible structure attached to the true physical one. This report analyzes the properties of such controllers, and shows that disturbance absorption behavior can be naturally described in terms of a set of virtual zeros that they introduce into the closed-loop dynamics of the system. Based on this analysis, techniques are then derived for selecting the active vibration absorber internal parameters, i.e., the gain matrices of such controllers, so as to achieve specified control objectives. Finally, the effects on closed-loop stability of small delays in the feedback loop are investigated. Such delays would typically be introduced by a digital implementation of an active vibration absorber. It is shown that these delays only affect the real parts of the eigenvalues of a lightly-damped structure. Furthermore, it is only the high-frequency modes that are destabilized by delays; low-frequency modes are actually made more heavily damped. Eigenvalue perturbation methods are used to obtain accurate predictions of the critical delay at which a given system will become unstable; these methods also determine which mode is critical.

Williams, Trevor W.↗

MSC/NASTRAN Stress Analysis of Complete Models Subjected to Random and Quasi-Static Loads

Space payloads, such as those which fly on the Space Shuttle in Spacelab, are designed to withstand dynamic loads which consist of combined acoustic random loads and quasi-static acceleration loads. Methods for computing the payload stresses due to these loads are well known and appear in texts and NASA documents, but typically involve approximations such as the Miles' equation, as well as possible adjustments based on "modal participation factors." Alternatively, an existing capability in MSC/NASTRAN may be used to output exact root mean square [rms] stresses due to the random loads for any specified elements in the Finite Element Model. However, it is time consuming to use this methodology to obtain the rms stresses for the complete structural model and then combine them with the quasi-static loading induced stresses. Special processing was developed as described here to perform the stress analysis of all elements in the model using existing MSC/NASTRAN and MSC/PATRAN and UNIX utilities. Fail-safe and buckling analyses applications are also described.

Hampton, Roy W.↗

Reliability-Based Design Optimization of a Composite Airframe Component

A stochastic design optimization methodology (SDO) has been developed to design components of an airframe structure that can be made of metallic and composite materials. The design is obtained as a function of the risk level, or reliability, p. The design method treats uncertainties in load, strength, and material properties as distribution functions, which are defined with mean values and standard deviations. A design constraint or a failure mode is specified as a function of reliability p. Solution to stochastic optimization yields the weight of a structure as a function of reliability p. Optimum weight versus reliability p traced out an inverted-S-shaped graph. The center of the inverted-S graph corresponded to 50 percent (p = 0.5) probability of success. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure that corresponds to unity for reliability p (or p = 1). Weight can be reduced to a small value for the most failure-prone design with a reliability that approaches zero (p = 0). Reliability can be changed for different components of an airframe structure. For example, the landing gear can be designed for a very high reliability, whereas it can be reduced to a small extent for a raked wingtip. The SDO capability is obtained by combining three codes: (1) The MSC/Nastran code was the deterministic analysis tool, (2) The fast probabilistic integrator, or the FPI module of the NESSUS software, was the probabilistic calculator, and (3) NASA Glenn Research Center s optimization testbed CometBoards became the optimizer. The SDO capability requires a finite element structural model, a material model, a load model, and a design model. The stochastic optimization concept is illustrated considering an academic example and a real-life raked wingtip structure of the Boeing 767-400 extended range airliner made of metallic and composite materials.

Patnaik, Surya N.↗

Model-Based Prognostics

This tutorial will cover the basics of model-based prognostics, and include concepts such as modeling approaches, estimation and prediction algorithms, and how uncertainty is represented and quantified. Other topics covered will include structural model decomposition, system-level prognostics, prognostics of hybrid systems, and distributed prognostics. Several case studies, such as water recovery systems to the prediction of safety margins in the national airspace system will be used to explain different concepts of prognostics and demonstrate their application to real-world systems.

Roychoudhury, Indranil↗

An Observation-Driven Framework for Modeling Post-Fire Hydrologic Response: Evaluation for Two Central California Case Studies

In a warming climate, wildfires are becoming increasingly common, especially in semi-arid environments. Wildfires can disrupt forest ecosystems and induce changes to the land surface. Collectively, these impacts can alter the hydrologic response of a catchment following a fire, resulting in increased potential for surface runoff, reduced evapotranspiration, and, ultimately, a higher risk for flash flooding and mass wasting. The timescale of post-fire recovery of hydrological processes to return to pre-fire conditions is not well established due to the lack of ground measurements. Accurate characterization of the impacts of fire on hydrologic response is also challenging to simulate, given the complex interplay of various processes. Here, we present a generalized framework to quantify the impacts of wildfire on runoff generation. We consider the disturbances in the vegetation and soil as the two main factors contributing to post-fire floods. Using an ensemble modeling structure to account for parameter uncertainty, remotely sensed leaf area index (LAI) is assimilated into a land surface model (LSM) to simulate vegetation disturbance, and the maximum land surface saturation LSM parameter is decreased to parameterize the soil disturbance following observed fires. We consider the impacts of fire-induced changes to LAI and soil saturation on hydrologic states like runoff and evapotranspiration for two case studies. These case studies demonstrate the general applicability of hydrophobicity formulation to serve as a guideline for exploring the range of hydrologic responses post-fire.

Fire Hydrology↗

2007 Research and Engineering Annual Report

Selected research and technology activities at NASA Dryden Flight Research Center are summarized. These following activities exemplify the Center's varied and productive research efforts: Developing a Requirements Development Guide for an Automatic Ground Collision Avoidance System; Digital Terrain Data Compression and Rendering for Automatic Ground Collision Avoidance Systems; Nonlinear Flutter/Limit Cycle Oscillations Prediction Tool; Nonlinear System Identification Using Orthonormal Bases: Application to Aeroelastic/Aeroservoelastic Systems; Critical Aerodynamic Flow Feature Indicators: Towards Application with the Aerostructures Test Wing; Multidisciplinary Design, Analysis, and Optimization Tool Development Using a Genetic Algorithm; Structural Model Tuning Capability in an Object-Oriented Multidisciplinary Design, Analysis, and Optimization Tool; Extension of Ko Straight-Beam Displacement Theory to the Deformed Shape Predictions of Curved Structures; F-15B with Phoenix Missile and Pylon Assembly--Drag Force Estimation; Mass Property Testing of Phoenix Missile Hypersonic Testbed Hardware; ARMD Hypersonics Project Materials and Structures: Testing of Scramjet Thermal Protection System Concepts; High-Temperature Modal Survey of the Ruddervator Subcomponent Test Article; ARMD Hypersonics Project Materials and Structures: C/SiC Ruddervator Subcomponent Test and Analysis Task; Ground Vibration Testing and Model Correlation of the Phoenix Missile Hypersonic Testbed; Phoenix Missile Hypersonic Testbed: Performance Design and Analysis; Crew Exploration Vehicle Launch Abort System-Pad Abort-1 (PA-1) Flight Test; Testing the Orion (Crew Exploration Vehicle) Launch Abort System-Ascent Abort-1 (AA-1) Flight Test; SOFIA Flight-Test Flutter Prediction Methodology; SOFIA Closed-Door Aerodynamic Analyses; SOFIA Handling Qualities Evaluation for Closed-Door Operations; C-17 Support of IRAC Engine Model Development; Current Capabilities and Future Upgrade Plans of the C-17 Data Rack; Intelligent Data Mining Capabilities as Applied to Integrated Vehicle Health Management; STARS Flight Demonstration No. 2 IP Data Formatter; Space-Based Telemetry and Range Safety (STARS) Flight Demonstration No. 2 Range User Flight Test Results; Aerodynamic Effects of the Quiet Spike(tm) on an F-15B Aircraft; F-15 Intelligent Flight Controls-Increased Destabilization Failure; F-15 Integrated Resilient Aircraft Control (IRAC) Improved Adaptive Controller; Aeroelastic Analysis of the Ikhana/Fire Pod System; Ikhana: Western States Fire Missions Utilizing the Ames Research Center Fire Sensor; Ikhana: Fiber-Optic Wing Shape Sensors; Ikhana: ARTS III; SOFIA Closed-Door Flutter Envelope Flight Testing; F-15B Quiet Spike(TM) Aeroservoelastic Flight Test Data Analysis; and UAVSAR Platform Precision Autopilot Flight Results.

Stoliker, Patrick↗

New structure and spin state of iron-rich (Mg,Fe)SiO[subscript 3] post-perovskite

There was a discrepancy between the seismic tomography and the elastic property of MgSiO{sub 3} perovskite at near the D{double_prime} zone and core boundary. Since a discovery of post-perovskite (ppv) of MgSiO{sub 3}, many investigations have made to explain the presence of low seismic velocity of the lower mantle and D{double_prime} zone. However, precise experimental structure analysis of ppv-(Mg{sub 1-x}Fe{sub x})SiO{sub 3} has never been reported because of the experimental difficulty. Fe and Mg cation distribution and ordering in ppv-(Mg,Fe)SiO{sub 3} in consideration of spins states are significant subject in lower mantle electronic and magnetic states. The present experiment aims X-ray emission study and structure analysis by Rietveld profile fitting of ppv-(Mg{sub 0.6},Fe{sub 0.4})SiO{sub 3} by the precise powder diffraction measurement. Monte Carlo calculation proposed the reliable structures of iron-rich phase of ppv-(Mg,Fe)SiO{sub 3}: Pmmn, Pmma, and Cm2m and Cmcm proposed by. The best-fit structure model with the highest reliability in the Rietveld fitting of ppv-(Mg{sub 0.6}Fe{sub 0.4})SiO{sub 3} is the structure of space group Pmma, in which Fe and Mg occupy two different sites of M1 and M2: the site occupancies are (Fe{sub 0.25}Mg{sub 0.75}) in the larger M1 site and (Fe{sub 0.55}, Mg{sub 0.45}) in the smaller M2 site. The two-site model is consistence with the previous results of X-ray emission and X-ray Moessbauer experiments.

36 MATERIALS SCIENCE↗

High Fidelity Adaptively Refined CFD and Reduced Order Models of a High Aspect Ratio Aeroelastic Wing Wind Tunnel Model

Robust adaptive mesh refinement for transonic conditions is one of the most difficult challenges to advancing CFD usage for certification by analysis. Transonic fluid-structure interaction cases represent an even more difficult challenge for adaptive mesh refinement. Production aircraft furthermore have structural models that have gaps and discontinuities that make the interdomain transfer of loads and deflections difficult. This adds to the challenge of adaptive mesh refinement. An initial attempt to create an adaptive mesh refinement process that refines regions of high flow gradient based around the HeldenMesh software is presented. The method is applied to the Integrated Adaptive Wing Technology Maturation (IAWTM) configuration. That has developed an aspect ratio 13.5 wing aeroelastic wind-tunnel model for testing in the Transonic Dynamics Tunnel (TDT). The high levels of deformation of this wing make the adaptation of meshes for the static shape difficult and has necessitated some creativity in how to efficiently adapt meshes. A time-domain identification of the unsteady system based on flexible modes using the adapted meshes is performed.

Robert E. Bartels↗

Integrated Modeling for the Next Generation Space Telescope "Yardstick" Concept

The so-called NASA "Yardstick" design concept for the Next Generation Space Telescope presents unique challenges for systems-level analysis. Simulations that integrate controls, optics, thermal, and structural models are required to evaluate baseline performance, study design sensitivities, and perform design optimization. An integrated modeling approach was chosen using a combination of commercial off-the-shelf and "in-house" developed codes. The resulting capability provides a foundation for linear and non-linear analysis, using both the time and frequency-domain methods. It readily allows various combinations of design parameters and environmental loads to be evaluated directly in terms of key science-related metrics, in this case the scalar RMS (root mean square) line-of-sight and RMS wavefront errors. This presentation first addresses the development of the component, or discipline, models for the Yardstick design. It will then proceed to present the integration of the component models, using linear-systems approaches, in order to support two of the most critical baseline performance analyses: jitter and thermal-elastic stability of the optical telescope assembly (OTA). The results of the jitter analysis indicate that disturbances from the reaction wheels coupled with the lightly-damped and highly-flexible structure present significant challenges to the baseline line-of-sight control architecture. Vibration isolation will be required to meet jitter error requirements. The results of the thermal-elastic analysis indicate that the mirror segment displacements due to ground-to-orbit cool-down of the telescope are within the expected capture range of the segment rigid-body control actuators. This means we will be able to align and phase the primary mirror. However, the results for the analysis of the thermal transient response following an attitude maneuver (slew) show that this telescope design is not sufficiently stable, passively, to meet the wavefront error requirements. Structural re-design is one possibility; alternatively, active thermal control of the OTA may be considered. The Yardstick integrated models were successfully used to demonstrate the feasibility of two thermal control strategies.

Mosier, Gary E.↗

HLA-Clus: HLA class I clustering based on 3D structure

In a previous paper, we classified populated HLA class I alleles into supertypes and subtypes based on the similarity of 3D landscape of peptide binding grooves, using newly defined structure distance metric and hierarchical clustering approach. Compared to other approaches, our method achieves higher correlation with peptide binding specificity, intra-cluster similarity (cohesion), and robustness. Here we introduce HLA-Clus, a Python package for clustering HLA Class I alleles using the method we developed recently and describe additional features including a new nearest neighbor clustering method that facilitates clustering based on user-defined criteria. The HLA-Clus pipeline includes three stages: First, HLA Class I structural models are coarse grained and transformed into clouds of labeled points. Second, similarities between alleles are determined using a newly defined structure distance metric that accounts for spatial and physicochemical similarities. Finally, alleles are clustered via hierarchical or nearest-neighbor approaches. We also interfaced HLA-Clus with the peptide:HLA affinity predictor MHCnuggets. By using the nearest neighbor clustering method to select optimal allele-specific deep learning models in MHCnuggets, the average accuracy of peptide binding prediction of rare alleles was improved. The HLA-Clus package offers a solution for characterizing the peptide binding specificities of a large number of HLA alleles. This method can be applied in HLA functional studies, such as the development of peptide affinity predictors, disease association studies, and HLA matching for grafting. HLA-Clus is freely available at our GitHub repository (https://github.com/yshen25/HLA-Clus).

59 BASIC BIOLOGICAL SCIENCES↗

China's Building Energy Demand: Long-Term Implications from a Detailed Assessment

We present here a detailed, service-based model of China’s building energy use, nested in the GCAM (Global Change Assessment Model) integrated assessment framework. Using the model, we explore long-term pathways of China’s building energy use and identify opportunities of reducing greenhouse gas emissions. The inclusion of a structural model of building energy demands within an integrated assessment framework represents a major methodological advance. It allows for a structural understanding of the drivers of building energy consumption while simultaneously considering the other human and natural system interactions that influence changes in the global energy system and climate. We also explore a range of different scenarios to gain insights into how China’s building sector might evolve and what the implications might be for improved building energy technology and carbon policies. The analysis suggests that China’s building energy growth will not wane anytime soon, although technology improvement will put downward pressure on this growth. Also, regardless of the scenarios represented, the growth will involve the continued, rapid electrification of the buildings sector throughout the century, and this transition will be accelerated by the implementation of carbon policy.

Building energy modeling↗

Large scale nonlinear numerical optimal control for finite element models of flexible structures

This paper discusses the development of large scale numerical optimal control algorithms for nonlinear systems and their application to finite element models of structures. This work is based on our expansion of the optimal control algorithm (DDP) in the following steps: improvement of convergence for initial policies in non-convex regions, development of a numerically accurate penalty function method approach for constrained DDP problems, and parallel processing on supercomputers. The expanded constrained DDP algorithm was applied to the control of a four-bay, two dimensional truss with 12 soft members, which generates geometric nonlinearities. Using an explicit finite element model to describe the structural system requires 32 state variables and 10,000 time steps. Our numerical results indicate that for constrained or unconstrained structural problems with nonlinear dynamics, the results obtained by our expanded constrained DDP are significantly better than those obtained using linear-quadratic feedback control.

Shoemaker, Christine A.↗

Computer based analyses of the response of box type structures to random pressures.

Analysis of the vibration of the internal structure of a relatively simple flight vehicle structural model consisting of a multicellular box in which two parallel outer face plates (skins) are connected together by several internal plates (ribs) which are parallel to each other and normal to the face plates. Such a box is representative of a wing or stabilizer structure. Three representations of the structure were considered in the computation. The simplest model which can account for the coupling between the face plates and the ribs is a two-dimensional assembly of beams. A more realistic, yet still simple, three-dimensional model has been developed using the Rayleigh-Ritz method. The third computational method employed was the NASTRAN finite-element displacement method. The computational results are compared with experimental data.

Clarkson, B. L.↗