Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mission Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Mars Entry Instrumentation Flight Data and Mars 2020 Entry Environments

On February 18th, 2021, the Mars 2020 entry vehicle delivered the Perseverance rover to the surface of Mars. The entry vehicle carried a set of instrumentation installed on the heatshield and backshell to measure aerodynamic and aerothermal performance, named the Mars Entry, Descent, and Landing Instrumentation 2. This set of instrumentation included pressure transducers, thermocouples, heatflux sensors, and a radiometer, as well as a dedicated sensor support electronics system. All MEDLI2 hardware operated as expected during cruise and entry. MEDLI2 sensors gathered accurate pressure measurements in hypersonic through supersonic regimes to reconstruct vehicle attitude and atmospheric profiles. MEDLI2 on the heatshield sensors indicated that surface temperatures, caused by turbulent heating beginning 70 seconds after entry, remained at or below 1430 °C, while heatshield bondline temperatures rose less than 45 °C. Backshell surface TPS temperatures peaked at 630 °C, which was caused primarily by radiative heating measured by several separate sensors. The MEDLI2 temperature and pressure measurements enabled further detailed characterization of the Mars 2020 entry performance, and the flight dataset will provide a wealth of information for the EDL community and future mission designers.

thermal protection systems↗

What to Take? When to Make? How to Break Even? Avoid Mistakes in Microbial Biomanufacturing in Support of Human Near-to-Deep-Space Exploration

In this whitepaper, we call for the concept of biomanufacturing to be expanded and widely adopted as a support function of human Space-travel. To demonstrate the impact and value of this strategy, we identify the specific offworld scenarios where the concept is most applicable, as well as the vital inventories that can be made available thereby. This will serve to increase capabilities of human operations beyond Earth-orbit and allow for extended mission design through greater autonomy while minimizing risks through redundancy. To this end, we sketch the potential routes and systems to arrive at these goals, in the form of specialized microbial cell factories that can most meaningfully leverage the resources available along the journey. The strategic vision presented here relies heavily on Synthetic Biology as it integrates with major plans for In Situ Resource Utilization and highlights applications that engineered biology is uniquely suited to address. We finish by advocating for the research and development investments that need to be made in order to significantly increase readiness of these technologies over the coming decade. This dovetails with current efforts to return humans to the Moon with Mars on the horizon. Besides ensuring the feasibility and sustainability of crewed Space exploration and habitation, the advancement of these technologies may spawn a new scalable microgravity-based biotechnology industry that contributes to the creation of a circular economy on Earth.

Biomanufacturing↗

Prediction of Calcium Oxalate Stone Risk with Interventions

Introduction Mitigations intended to reduce bone mineral loss in-flight also influence the level of renal stone risk to astronauts. Extending a recent study completed by our group [1], we investigate the likely influence of combined fluid intake and Ca excretion mitigation strategies. Methods A computational biochemistry model representing CaOx crystal precipitation, growth, and agglomeration [2] is combined with a probabilistic analysis to predict the in-flight CaOx renal stone incidence risk ratio (IRR) relative to pre-flight values using 1517 astronaut 24-hour urine chemistries. The output of this simulation is used to assess the combined impact of controlling fluid intake and Ca excretion on maintaining IRR < 1.2 for > 95% of the population, a threshold determined from initial analysis of the model output compared to referent populations [1]. Results and Conclusions Figure 1 illustrates the simulated in-flight astronaut population (n=40000) with CaOx IRR > 1.2. The red lines indicate the known clinical risk boundary of each factor, and the white box is considered the area of high combined clinical risk. The simulation and identified risk threshold conform well to the expected clinical risk boundaries. The results, assuming insensible water losses equal or exceed 0.7 L/day, imply mitigations achieve risks similar to pre-flight levels when either Ca < 150 mg/day or fluid volume intake > 3.2 L/day individually, or combined Ca < 200 and fluid volume intake > 2.5 L/day. We continue to investigate similar compounded effects and look to apprise engineering trades by informing relative risk changes during mission design. References [1] D. A. Goodenow-Messman, S. A. Gokoglu, M. Kassemi, and J. Myers, Jerry G., “Characterization of Astronaut CaOx Renal Stone Incidence Rates to Quantify In-flight and Post-flight Relative Risk,” npj Microgravity, in review, 2021. [2] M. Kassemi and D. Thompson, “Prediction of renal crystalline size distributions in space using a PBE analytic model. 1. Effect of microgravity-induced biochemical alterations,” Am. J. Physiol. Physiol., vol. 311, no. 3, pp. F520–F530, Sep. 2016, doi: 10.1152/ajprenal.00401.2015.

Debra A Goodenow↗

Spectral Fidelity of Earth's Terrestrial and Aquatic Ecosystems

The Surface Biology and Geology (SBG) investigation will create global maps of spectral surface reflectance and emissivity at a cadence of 16 days or better, with coverage to address global questions about Earth's geology, cryosphere and ecosystems. The revolutionary potential poses a commensurate challenge: creating contiguous maps free from regional biases induced by atmosphere, observation geometry, or inversion error. This will require an accurate calibration with precise knowledge of each channel's spectral response. Here, we quantify the impact of spectral calibration on SBG's aquatic and terrestrial ecosystem objectives. We find that contemporary algorithms for ecosystem trait retrieval demand more accurate spectral calibration than historical missions. Errors due to drift or spatial nonuniformity in the wavelength calibration that have previously been considered acceptable can cause systematic errors larger than the instrument noise and of the same order as the variability SBG aims to measure. Moreover, their impact on atmospheric correction can induce climate-dependent systematic errors that thwart comparisons between ecosystems. These results underscore the importance of spectral response accuracy in SBG mission design.

imaging spectroscopy↗

Response of Ablative Thermal Protection Materials to Degradation in Low Earth Orbit –Characterization of Specimens from MISSE-13

The environment of low Earth orbit presents unique material interactions due to the presence of atomic oxygen and solar spectrum UV. A variety of degradation mechanisms can occur depending, inlarge part, on the specific material system involved. This talk will review the characterization of two ablative materials, PICA-D and HEEET, as well as relevant adhesive joints and coatings. PICA-D is a variant of the phenolic impregnated carbon ablator (PICA) and is the baseline thermal protection system (TPS) on Dragonfly and the lander for Mars Sample Return (MSR). HEEET is a 3D woven system from which MSR’s Earth entry TPS is derived. The samples for these materials were flown in orbit during the Materials International Space Station Experiment-13 (MISSE-13) which launched on March 6, 2020 and returned to Earth on January 13, 2021. Changes to surface microstructure and reflectivity will be presented along with tomographic analysis. The effect of differential erosion rates on the composites and the impacts of the orbit environment on coating performances will be discussed in the context of TPS performance and mission design aspects.

MISSE↗

Intellectual Property and Licensing in the Commercial Space Age

The commercial space industry is undergoing a paradigm shift from the time when governments and very large space companies dominated the industry. A confluence of laws allowing commercial space companies to operate in unprecedented ways, new technologies enabling new commercial space applications, and an influx of risk capital has drastically changed the space industry landscape. As small and medium-sized companies enter the commercial space realm, they will seek a competitive advantage, and universities and the NASA space centers are positioned to offer such advantages. The commercial space industry has recently become an active area of technology partnering and licensing, even for technologies that have experienced poor licensing performance in the past. The Jet Propulsion Laboratory is seeing unprecedented technology transfer activity in the areas of spacecraft navigation, mission design, space antennas, thrusters, radio occultation, and specialized satellites. Intellectual property rights and partnering play a crucial role in the ability of the private sector to invest in these technologies and to drive space technologies forward. Participants in this burgeoning field seek the most cutting-edge innovations to attain a competitive advantage, and it is crucial for those in the university and public sector to gain an understanding of the market forces that are driving the commercial space business.

Broderick, Daniel↗

Lambert’s Problem – A Geometric Approach

A fundamental problem in spacecraft mission design is to find a free flight path from one place to another in a chosen travel time. Lambert studied this problem for free flight in an inverse square central force field, and Lagrange produced a solution in 1778. Although this is an old problem, a new approach may be of some value. There are two steps to the new solution. First, find every ellipse with focus at the origin that intersects two circles both centered at the origin. Then select only those ellipses that have a specified angle between the intersection points of the ellipse with the inner and outer circles. Second, find the travel times between intersections for each ellipse. These are all the possible travel times from which one may choose. Standard solutions to Lambert’s problem can be found in references [1-4].

Easton, Robert↗

Lessons Learned in Remote Participant Concurrent Engineering Concept Development Studies

Team-X was born from a need to perform rapid space mission design for principal investigator-led competed proposals in the mid-1990s. Throughout the last 25 years, Team-X at the Jet Propulsion Laboratory has expanded its application of the collaborative, concurrent study approach into every facet necessary to win competed proposals. The COVID-19 pandemic of 2020 created an immediate and new constraint on these studies – the need to conduct them with remote participants, both on the client side requesting the study, but also on the provider side producing the study. This paper provides lessons learned from dozens of design studies run by Team-X at the Jet Propulsion Laboratory during the COVID-19 pandemic. These lessons span all aspects of the information infrastructure: the people, processes, procedures, methods, tools, and “facilities”. These lessons learned will have applicability post-pandemic, as they have shown how best to incorporate participants, both on the provider side, and on the client side, who cannot travel or otherwise be co-located during collaborative, concurrent study sessions.

Nash, Alfred↗

Scheduling the Mapping of a planet under geometrical constraints

Scheduling the coverage of a planet by scientific instruments on board spacecrafts under observational constraints is central in a significant number of current and future missions for the exploration of the solar system. In this paper, we describe the components and algorithms of a software used to study early-phase mission design or to schedule daily operations of currently in-flight spacecraft. The scheduling problem at hand is usually a large combinatorial problem. A discretization process is described and several ordering algorithms are designed and compared. Experiments show that high-quality schedules can be produced by approaches combining reasoning about rolling, coverage and priorities.

Wells, Christopher↗

Navigating Low-Energy Trajectories to Land on the Surface of Europa

The current interest in sending a probe to the surface of Europa in search of life demands not only efficient strategies in mission design, but also requires the capability of knowing the navigability of such types of trajectories. An initial search to find low-energy approach trajectories with a variety of topologies that are challenging to navigate is initially performed in the circular restricted three-body problem. These trajectories are subsequently converted to the ephemeris model and used for detailed navigation analysis. We explore several maneuver strategies and assess spacecraft state uncertainties at Europa arrival as well as fuel consumption.

McElrath, Tim↗

Challenges to Aboveground Biomass Prediction from Waveform Lidar

Accurate accounting of aboveground biomass density (AGBD) is crucial for carbon cycle, biodiversity, and climate change science. The Global Ecosystem Dynamics Investigation (GEDI), which maps global AGBD from waveform lidar, is the first of a new generation of Earth observation missions designed to improve carbon accounting. This paper explores the possibility that lidar waveforms may not be unique to AGBD—that forest stands with different AGBD may produce highly similar waveforms—and we hypothesize that non-uniqueness may contribute to the large uncertainties in AGBD predictions. Our analysis integrates simulated GEDI waveforms from 428 in situ stem maps with output from an individual-based forest gap model, which we use to generate a database of potential forest stands and simulate GEDI waveforms from those stands. We use this database to predict the AGBD of the 428 in situ stem maps via two different methods: a linear regression from waveform metrics, and a waveform-matching approach that accounts for waveform-AGBD non-uniqueness. We find that some in situ waveforms are more unique to AGBD than others, which notably impacts AGBD prediction uncertainty (7–411 Mg ha−1, average of 167 Mg ha−1). We also find that forest structure complexity may influence the non-uniqueness effect; stands with low structural complexity are more unique to AGBD than more mature stands with multiple cohorts and canopy layers. These findings suggest that the non-uniqueness phenomena may be introduced by the measuring characteristics of waveform lidar in combination with how forest structure manifests at small scales, and we discuss how this complexity may complicate uncertainty estimation in AGBD prediction. This analysis suggests a limit to the accuracy and precision of AGBD predictions from lidar waveforms seen in empirical studies, and underscores the need for further exploration of the relationships between lidar remote sensing measurements, forest structure, and AGBD.

GEDI↗

Updates to the Predictive Materials Modeling Software Tools

Updates on NASA's efforts to build predictive material models from the micro-scale to the macro-scale are presented. To complement the mission design cycle process and reduce the need for extensive testing, NASA is developing modeling and simulation tools that enable characterizing material properties and response to hot plasma experienced during atmospheric entry. The PuMA (microstructure analysis), PATO (macroscale material response), SPARTA (direct simulation Monte Carlo) and ARCHeS (arc heater modeling) codes are described. A range of applications, encompassing calculating effective material properties, study of high shear boundary layer flow over woven materials, new model of silicone-based coatings, new model of mechanical erosion, as well as approach to loose multi-physics coupling, are presented.

material modeling↗

Near Earth Asteroid Scout - Mission Update

After its deployment from NASA’s Space Launch System (SLS), the Near-Earth Asteroid (NEA) Scout mission will travel to and image an asteroid during a close flyby using an 86m^2 solar sail as its primary propulsion. Solar sails are large, mirror-like structures made of a lightweight material that reflects sunlight to propel the spacecraft. The continuous solar photon pressure provides thrust with no need for the heavy, expendable propellants used by conventional chemical and electric propulsion systems. Developed by NASA’s Marshall Space Flight Center (MSFC) and Jet Propulsion Laboratory (JPL), the NEA Scout is based on the industry-standard CubeSat form factor. The spacecraft measures 11 cm x 24 cm x 36 cm and weighs less than 14 kilograms. Following deployment from the Space Launch System (SLS), the solar sail will deploy, and the spacecraft will begin its 2.0 – 2.5-year journey. About one month before the asteroid flyby, NEA Scout will search for the target and start its Approach Phase using a combination of radio tracking and optical navigation and perform a relatively slow flyby (10-20 m/s) of the target. A summary of the mission, sailcraft, mission design, and its first several months of deep space operation will be described.

Near Earth Asteroid↗

Response of Ablative Thermal Protection Materials to Degradation in Low Earth Orbit – Characterization of Specimens from MISSE-13

The environment of low Earth orbit presents unique material interactions due to the presence of atomic oxygen and solar spectrum UV. A variety of degradation mechanisms can occur depending, in large part, on the specific material system involved. This talk will review the characterization of two ablative materials, PICA-D and HEEET, as well as relevant adhesive joints and coatings. PICA-D is a variant of the phenolic impregnated carbon ablator (PICA) and is the baseline thermal protection system (TPS) on Dragonfly and the lander for Mars Sample Return (MSR). HEEET is a 3D woven system from which MSR’s Earth entry TPS is derived. The samples for these materials were flown in orbit during the Materials International Space Station Experiment-13 (MISSE-13) which launched on March 6, 2020 and returned to Earth on January 13, 2021. Changes to surface microstructure and reflectivity will be presented along with tomographic analysis. The effect of differential erosion rates on the composites and the impacts of the orbit environment on coating performances will be discussed in the context of TPS performance and mission design aspects.

MISSE↗

Compass Concurrent Engineering Lessons Learned in Remote and Hybrid Environments

The Compass Team at NASA’s Glenn Research Center (GRC) is a concurrent engineering team which specializes in conceptual spacecraft mission designs. Detailed descriptions of the team, its history, and its operating model can be found in [1] and [2]. During the COVID-19 pandemic, the team was required to move to remote (virtual) operation from their in-person model for approximately 22 months. As the restrictions began to lift and team members were able to return in-person to the Compass Lab, the team moved into a hybrid mode of operation, with some participants still tying in remotely some or all of the time. This paper discusses many of the lessons learned from these experiences, highlighting improvements, outstanding challenges and the tools and methodologies used to address both. Throughout this discussion the terms “in-person”, “hybrid”, “virtual” and “remote” will be used. For the purposes of this paper, “in-person” will be understood to mean when team members are interacting simultaneously, physically within the Compass Lab. “Remote” or “virtual” will refer to when interactions are happening between people who are not co-located using only technology to interface. “Hybrid” will refer to when two or more participants are physically located in the Compass Lab and one or more participant(s) is participating remotely. Media richness is described as “a medium’s ability to communicate effectively based of four factors. They are the capacity for immediate feedback, the number of cues and channels it utilizes, the degree of personalization it affords, and its ability to communicate using natural language” [3]. This theory will be referenced and discussed in multiple of the following sections due to its relevance when choosing how to operate in remote and hybrid modes, as well as in making tool selections. The key to selecting the best mode of communication lays in how complicated the discussion is and the level of ambiguity involved. Not all conversations or interactions require media rich mediums. For example, providing information about which there is little to no ambiguity can easily be done in less rich methods - such as email. A conversation including high levels of ambiguity and/or complex information is better suited to a richer medium, such as in-person or a video call with shared screens.

Concurrent Engineering↗

In-space Servicing, Assembly, and Manufacturing (ISAM) State of Play 2022 Edition

The future of spaceflight will yield increasingly more ambitious missions to support civil, national security, and commercial space sectors. Achieving these ambitious missions is not feasible using the traditional paradigm of launching an integrated, fully functioning system on a single launch vehicle. For example, science and human exploration missions will desire payloads that are larger than any foreseeable launch vehicle fairing, national security missions will require persistent assets that are mobile and resilient, and commercial space missions will require cost-effective ways to update to the latest technology on orbit. In-space Servicing, Assembly, and Manufacturing (ISAM) can vastly expand the performance, availability, and lifetime of space systems compared to the traditional paradigm of launching an asset with no intent to ever touch it again. ISAM capabilities foster an ecosystem that changes the space operations paradigm, creating the foundation for sustainable exploration and serving as a multiplier for other capabilities like space logistics, power generation, and reusability. Previous achievements in ISAM have enabled ambitious human and robotic space missions. NASA’s International Space Station (ISS) operations and maintenance, servicing missions of the Hubble Space Telescope (HST), and Northrop Grumman’s Mission Extension Vehicle (MEV) demonstrate the dramatic operational missions that can be achieved using ISAM capabilities. Many current and upcoming flight demonstrations are advancing areas that will enable the next generation of civil, national security, and commercial space missions. This document describes the current state of ISAM missions, capabilities, and developments. Compiling and organizing the available ISAM capabilities will help mission designers incorporate ISAM technologies into their concepts, create the starting point for technology development plans and roadmaps, and provide technologists a survey of the field they are developing. This document divides the ISAM capabilities into 11 capability areas that describe the functions or activities that would be performed in space using ISAM. This version of the ISAM State of Play is part of a continuing journey to encourage the use of ISAM capabilities in space. Compiling and organizing the current state of ISAM provides a simple resource for those working in the ISAM ecosystem to ensure that the advancements being made build upon the investments of the past. The state of play is ever changing as new capabilities are developed, and this document will be periodically updated to ensure that it is relevant to those who need it in the future.

ISAM↗

Numerical Modelling of Sublimation Losses During Sample Handling Within the Light WAVE Lunar Water Prospecting Instrument

NASA’s focus of exploring the Moon’s south pole under the Artemis program has placed new emphasis on characterizing the quantity and distribution of water ice and other volatiles present within the Moon’s permanently shadowed regions (PSRs), first measured during the 2009 LCROSS mission. NASA’s VIPER rover is the first of a series of prospecting missions to characterize this water ice resource. NASA’s Johnson Space Center (JSC) has developed the Light Water Analysis and Volatiles Extraction (Light WAVE) instrument shown in Figure 1 for a follow-on prospecting mission, designed to be a rover payload for water ice prospecting at various depths and locations within PSRs. A key source of error for lunar water prospecting instruments, including Light WAVE, is the loss of water in an icy regolith sample to the lunar vacuum via sublimation due to heating above its ice-stable temperature. This abstract and conference presentation discuss a sublimation model for Light WAVE’s sample crucible using COMSOL Multiphysics to assess the sublimation losses that would occur between sample collection from an external drill and sealing the sample within Light WAVE’s boiler.

Lunar Polar Water↗

TPS to Enable a Uranus Orbiter Probe

Recent mission studies point to delivery of the probe either at Uranus or at Neptune will require 3-D Woven TPS, either the two layer HEEET or the single layer 3MDCP. Recent studies point to 3MDCP being more mass efficient. The 3MDCP capability being developed to support MSR EES is sufficient if the probe size is 1.25 m or less. If the prove diameter is larger than 1.25 m, a possibility then Dual layer HEEET which is scalable is at TRL 6 is certified and ready. It is possible to develop a seam approach that would allow 3MDCP and the mass savings could warrant development of a seam capability. Depending on the outcome of the planned Flagship mission study that Ames plans to support, Ames is already working on a concept that can be developed and demonstrated in the coming years. If in case Aerocapture is demonstrated through a Earth Flight Test and becomes part of the mission design for Uranus, this makes delivery of the probes from orbit easier. Whether the probe is to delivered from Orbit or not, still 3-D Woven (HEEET or 3MDCP) is the only TPS qualified to enable the Ice Giant in situ probes.

Matthew J Gasch↗