Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mechanism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Improving the mechanical properties of Zr-based bulk metallic glass by controlling the activation energy for β-relaxation through plastic deformation

The mechanism of plastic deformation in bulk metallic glasses (BMGs) is widely believed to be based on a shear transformation zone (STZ). This model assumes that a shear-induced atomic rearrangement occurs at local clusters that are a few to hundreds of atoms in size. It was recently postulated that the potential energy barrier for STZ activation, W{sub STZ}, calculated using the cooperative shear model, is equivalent to the activation energy for β-relaxation, E{sub β}. This result suggested that the fundamental process for STZ activation is the mechanically activated β-relaxation. Since the E{sub β} value and the glass transition temperature T{sub g} of BMGs have a linear relation, that is, because E{sub β} ≈ 26RT{sub g}, the composition of the BMG determines the ease with which the STZ can be activated. Enthalpy relaxation experiments revealed that the BMG Zr{sub 50}Cu{sub 40}Al{sub 10} when deformed by high-pressure torsion (HPT) has a lower E{sub β} of 101 kJ/mol. The HPT-processed samples accordingly exhibited tensile plastic elongation (0.34%) and marked decreases in their yield strength (330 MPa). These results suggest that mechanically induced structural defects (i.e., the free volume and the anti-free volume) effectively act to reduce W{sub STZ} and increase the number of STZs activated during tensile testing to accommodate the plastic strain without requiring a change in the composition of the BMG. Thus, this study shows quantitatively that mechanically induced structural defects can overcome the compositional limitations of E{sub β} (or W{sub STZ}) and result in improvements in the mechanical properties of the BMG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing the folded state and mechanical unfolding pathways of T4 lysozyme using all-atom and coarse-grained molecular simulation

The Bacteriophage T4 Lysozyme (T4L) is a prototype modular protein comprised of an N-terminal and a C-domain domain, which was extensively studied to understand the folding/unfolding mechanism of modular proteins. To offer detailed structural and dynamic insights to the folded-state stability and the mechanical unfolding behaviors of T4L, we have performed extensive equilibrium and steered molecular dynamics simulations of both the wild-type (WT) and a circular permutation (CP) variant of T4L using all-atom and coarse-grained force fields. Our all-atom and coarse-grained simulations of the folded state have consistently found greater stability of the C-domain than the N-domain in isolation, which is in agreement with past thermostatic studies of T4L. While the all-atom simulation cannot fully explain the mechanical unfolding behaviors of the WT and the CP variant observed in an optical tweezers study, the coarse-grained simulations based on the Go model or a modified elastic network model (mENM) are in qualitative agreement with the experimental finding of greater unfolding cooperativity in the WT than the CP variant. Interestingly, the two coarse-grained models predict different structural mechanisms for the observed change in cooperativity between the WT and the CP variant—while the Go model predicts minor modification of the unfolding pathways by circular permutation (i.e., preserving the general order that the N-domain unfolds before the C-domain), the mENM predicts a dramatic change in unfolding pathways (e.g., different order of N/C-domain unfolding in the WT and the CP variant). Based on our simulations, we have analyzed the limitations of and the key differences between these models and offered testable predictions for future experiments to resolve the structural mechanism for cooperative folding/unfolding of T4L.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetization mechanisms in ordered arrays of polycrystalline Fe{sub 100−x}Co{sub x} nanowires

Magnetization reversal processes and coercivity mechanisms in polycrystalline Fe{sub 100−x}Co{sub x} nanowire arrays, resulting from an AC electrodeposition process, are investigated. The array coercivity is described on the basis of polarization reversal mechanisms operating in individual wires, under the effect of inter-wire dipolar interactions described by a mean field approximation. For individual wires, a reversal mechanism involving the nucleation and further expansion of domain-wall like spin configuration is considered. The wires have a mean grain size larger than both the nanowire diameter and the exchange length, so localized and non-cooperative nucleation modes are considered. As the Co content increases, the alloy saturation polarization gradually decreases, but the coercive field and the relative remanence of the arrays increase, indicating that they are not controlled by the shape anisotropy in all the composition range. The coercive field dependence on the angle between the applied field and the wire long axis is not well described by reversal mechanisms involving nucleation and further displacement of neither vortex nor transverse ideal domain walls. On the contrary, the angular dependence of the coercive field observed at room temperature is well predicted by a model considering nucleation of inverse domains by localized curling, in regions smaller than the grain size, exhibiting quite small aspect ratios as compared to those of the entire nanowire. In arrays with higher Co contents, a transition from an initial (small angle) localized curling nucleation mechanism to another one, involving localized coherent rotation is observed at about π/4.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical dynamics simulations of the monohydrated OH{sup −}(H{sub 2}O) + CH{sub 3}I reaction. Atomic-level mechanisms and comparison with experiment

Direct dynamics simulations, with B97-1/ECP/d theory, were performed to study the role of microsolvation for the OH{sup −}(H{sub 2}O) + CH{sub 3}I reaction. The S{sub N}2 reaction dominates at all reactant collision energies, but at higher collision energies proton transfer to form CH{sub 2}I{sup −}, and to a lesser extent CH{sub 2}I{sup −} (H{sub 2}O), becomes important. The S{sub N}2 reaction occurs by direct rebound and stripping mechanisms, and 28 different indirect atomistic mechanisms, with the latter dominating. Important components of the indirect mechanisms are the roundabout and formation of S{sub N}2 and proton transfer pre-reaction complexes and intermediates, including [CH{sub 3}--I--OH]{sup −}. In contrast, for the unsolvated OH{sup −} + CH{sub 3}I S{sub N}2 reaction, there are only seven indirect atomistic mechanisms and the direct mechanisms dominate. Overall, the simulation results for the OH{sup −}(H{sub 2}O) + CH{sub 3}I S{sub N}2 reaction are in good agreement with experiment with respect to reaction rate constant, product branching ratio, etc. Differences between simulation and experiment are present for the S{sub N}2 velocity scattering angle at high collision energies and the proton transfer probability at low collision energies. Equilibrium solvation by the H{sub 2}O molecule is unimportant. The S{sub N}2 reaction is dominated by events in which H{sub 2}O leaves the reactive system as CH{sub 3}OH is formed or before CH{sub 3}OH formation. Formation of solvated products is unimportant and participation of the (H{sub 2}O)CH{sub 3}OH---I{sup −} post-reaction complex for the S{sub N}2 reaction is negligible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of SMAT on microstructural and mechanical properties of AA2024

In recent days surface mechanical attrition treatment (SMAT) had attracted the attention of researchers as it produces a nano-crystalline surface with improved mechanical properties. In the present study Al-4%Cu alloy used in automobile and aerospace application is subjected to surface mechanical attrition treatment using steel shots. The microstructural changes introduced on the surface of the Al alloy was investigated using Scanning Electron Microscopy (SEM). The secondary phases formed during the SMAT process is been investigated using EDX and XRD analysis. The effects of SMAT on the mechanical properties were analyzed using a tensile testing. The SMA treatment had resulted in severe plastic deformation of the surface, thereby yielded a nanocrystalline surface with a grain size of 30 to 50 nm. Further, it is also found that the SMAT produced ultra nanocrystalline particles of Cu{sub 2}Al dispersed uniformly into α-Al matrix. These microstructural changes had resulted in considerable change in the mechanical properties of these alloys. The tensile strength of these alloys had increased from ∼212 MPa to 303 MPa while the fracture toughness increased up to 28% in 10 minutes of SMAT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and heteroatom dictate the doping mechanism and thermoelectric properties of poly(alkyl-chalcogenophenes)

Heteroatom substitution can favorably alter electronic transport in conductive polymers to improve their thermoelectric performance. Here we report the spectroscopic, structural, and thermoelectric properties of poly(3–(3',7'-dimethyloctyl) chalcogenophenes) or P3RX doped with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ), where the heteroatom [X = thiophene (T), selenophene (Se), tellurophene (Te)], the doping methodology, and extent of doping are systematically varied. Spectroscopic measurements reveal that while all P3RX polymers are appreciably doped, the doping mechanism is inherently different. Poly(3-hexylthiophene) (P3HT, used as a control) and poly(3–(3',7'-dimethyloctyl)tellurophene) (P3RTe) are doped primarily via integer charge transfer (ICT), whereas poly(3–(3',7'-dimethyloctyl)selenophene) (P3RSe) and poly(3–(3',7'-dimethyloctyl)thiophene) (P3RT) are doped via charge transfer complex (CTC) mechanisms. Despite these differences, all polymers saturate with roughly the same number of F4TCNQ counterions (1 dopant per 4 to 6 heterocycles), reinforcing the idea that the extent of charge transfer varies with the doping mechanism. Grazing incidence wide-angle x-ray scattering measurements provide insight into the structural driving forces behind different doping mechanisms—P3RT and P3RSe have similar microstructures in which F4TCNQ intercalates between the π-stacked backbones resulting in CTC doping (localized carriers), while P3HT and P3RTe have microstructures in which F4TCNQ intercalates in the alkyl side chain region, giving rise to ICT doping (delocalized carriers). These structural and spectroscopic observations shed light on why P3HT and P3RTe obtain electrical conductivities ca. 3 S/cm, while P3RT and P3RSe have conductivities <10–3 S/cm under the same thin film processing conditions. Ultimately, this work quantifies the effects of heteroatom, microstructural ordering, extent of doping, and doping mechanism, thereby providing rational guidance for designing future thermoelectric polymer-dopant systems.

36 MATERIALS SCIENCE↗

Synergistic Effect of Diatomic Mo-B Site Confined in Graphene-Like C 2 N Enables Electrocatalytic Nitrogen Reduction via Novel Mechanism

Structural modulation of active site with atomic-level precision is of great importance to meet the activity and selectivity challenges that electrocatalysts are commonly facing. In this work, we have designed a metal (M) - nonmetal (NM) diatomic site embedded in graphene-like C 2 N (denoted as Mo-B@C 2 N), where electrocatalytic N 2 reduction reaction (eNRR) was thoroughly explored using density functional theory combined with computational hydrogen electrode method. Compared to M-M diatomic sites, Mo-B site can generate pronounced synergistic effect that led to eNRR proceeding via a novel quasi-dissociative reaction mechanism that has not been reported relative to the conventional enzymatic, consecutive, distal, and alternating associative mechanism. This newly uncovered mechanism in which N-N bond scission takes place immediately after the first proton-coupled electron transfer (PCET) step (i.e., *NH-*N + H + + e – ® *NH 2 *N) has demonstrated much advantage in PCET process over the four conventional mechanism in terms of thermodynamic barrier, except that the adsorption of side-on *N 2 seemed thermodynamically unfavorable (DG ads = 0.61eV). Our results have revealed that the activation of inert NºN triple bond is dominated by π*-backdonation mechanism as a consequence of charge transfers from both B and Mo site, and unexpectedly, from the substrate C 2 N itself as well. Moreover, the hybrid Mo-B diatomic site demonstrated superior performance over either Mo-Mo or B-B site for driving eNRR. Furthermore, our study could provide insight into the delicate relationships among atomic site, substrate and electrocatalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cyclophilin A catalyzes proline isomerization by an electrostatic handle mechanism

Proline isomerization is a ubiquitous process that plays a key role in the folding of proteins and in the regulation of their functions1-3. Different families of enzymes, known as peptidyl-prolyl isomerases (PPIases), catalyse this reaction, which involves the interconversion between the cis and trans isomers of the Nterminal amide bond of the amino acid proline2,3. A complete description of the mechanisms by which these enzymes function, however, has remained elusive. Here, we show that cyclophilin A, one of the most common PPIases4, provides a catalytic environment that acts on the substrate through an electrostatic lever mechanism. In this mechanism, the electrostatic field in the catalytic site turns the electric dipole associated with the carboxylic group of the amino acid preceding the proline in the substrate, thus causing the rotation of the peptide bond between the two residues. This mechanism resulted from the analysis of an ensemble of conformations populated by cyclophilin A during the enzymatic reaction using a combination of NMR measurements, molecular dynamics simulations and density functional theory calculations. We anticipate that this approach will be helpful in elucidating whether the electrostatic lever mechanism that we describe is common to other PPIases, and more generally to characterise other enzymatic processes.

Environmental Molecular Sciences Laboratory↗

FEEDBACK FROM CENTRAL BLACK HOLES IN ELLIPTICAL GALAXIES. II. CAN PURELY MECHANICAL ENERGY FEEDBACK MODELS WORK?

By using high-resolution one-dimensional hydrodynamical simulations, we investigate the effects of purely mechanical feedback from super massive black holes (SMBHs) in the evolution of elliptical galaxies for a broad range of feedback efficiencies and compare the results to four major observational constraints. In particular, we focus on (1) the central black hole to stellar mass ratio of the host galaxy, (2) the lifetime of the luminous quasar phase, (3) the mass of stars formed in the host galaxy within the last Gyr, and (4) the X-ray luminosity of the hot diffuse gas. As a result, we try to pin down the most successful range of mechanical feedback efficiencies. We find that while low feedback efficiencies result in too much growth of the SMBH, high efficiencies totally blow out the hot interstellar gas, and the models are characterized by very low thermal X-ray luminosity well below the observed range. The net lifetime of the quasar phase is strongly coupled to the mass ratio between SMBH and its host galaxy, while the X-ray luminosity is generally correlated to the recent star formation within the last Gyr. When considering the popularly adopted model of the constant feedback efficiency, the feedback energy deposited into the ambient medium should be more than 0.01% of the SMBH accretion energy to be consistent with the SMBH mass to stellar mass ratio in the local universe. Yet, the X-ray luminosity of the hot gas favors about 0.005% of the accretion energy as the mechanical active galactic nucleus (AGN) feedback energy. We conclude that the purely mechanical feedback mode is unlikely to be simultaneously compatible with all four observable tests, even allowing a broad range of feedback efficiencies, and that including both radiative and mechanical feedback together may be a solution to comply with the observational constraints. In addition to the adopted observational constraints, our simulations also show that the ratio of SMBH growth rate over its current mass and the density and temperature distribution of hot gas can be useful observable diagnostics for AGN feedback efficiencies.

79 ASTRONOMY AND ASTROPHYSICS↗

CONSTRAINTS ON JET FORMATION MECHANISMS WITH THE MOST ENERGETIC GIANT OUTBURSTS IN MS 0735+7421

Giant X-ray cavities lie in some active galactic nuclei (AGNs) locating in central galaxies of clusters, which are estimated to have stored 10{sup 55}-10{sup 62} erg of energy. Most of these cavities are thought to be inflated by jets of AGNs on a timescale of {approx}> 10{sup 7} years. The jets can be either powered by rotating black holes or the accretion disks surrounding black holes, or both. The observations of giant X-ray cavities can therefore be used to constrain jet formation mechanisms. In this work, we choose the most energetic cavity, MS 0735+7421, with stored energy {approx}10{sup 62} erg, to constrain the jet formation mechanisms and the evolution of the central massive black hole in this source. The bolometric luminosity of the AGN in this cavity is {approx}10{sup -5} L{sub Edd}, however, the mean power of the jet required to inflate the cavity is estimated as {approx}0.02L{sub Edd}, which implies that the source has previously experienced strong outbursts. During outbursts, the jet power and the mass accretion rate should be significantly higher than its present values. We construct an accretion disk model in which the angular momentum and energy carried away by jets are properly included to calculate the spin and mass evolution of the massive black hole. In our calculations, different jet formation mechanisms are employed, and we find that the jets generated with the Blandford-Znajek (BZ) mechanism are unable to produce the giant cavity with {approx}10{sup 62} erg in this source. Only the jets accelerated with a combination of the Blandford-Payne and BZ mechanisms can successfully inflate such a giant cavity if the magnetic pressure is close to equipartition with the total (radiation+gas) pressure of the accretion disk. For a dynamo-generated magnetic field in the disk, such an energetic giant cavity can be inflated by the magnetically driven jets only if the initial black hole spin parameter a{sub 0} {approx}> 0.95. Our calculations show that the final spin parameter a of the black hole is always {approx}0.9-0.998 for all the computational examples that can provide sufficient energy for the cavity of MS 0735+7421.

79 ASTRONOMY AND ASTROPHYSICS↗

STARS DO NOT EAT THEIR YOUNG MIGRATING PLANETS: EMPIRICAL CONSTRAINTS ON PLANET MIGRATION HALTING MECHANISMS

The discovery of ''hot Jupiters'' very close to their parent stars confirmed that Jovian planets migrate inward via several potential mechanisms. We present empirical constraints on planet migration halting mechanisms. We compute model density functions of close-in exoplanets in the orbital semi-major axis-stellar mass plane to represent planet migration that is halted via several mechanisms, including the interior 1:2 resonance with the magnetospheric disk truncation radius, the interior 1:2 resonance with the dust sublimation radius, and several scenarios for tidal halting. The models differ in the predicted power-law dependence of the exoplanet orbital semi-major axis as a function of stellar mass, and thus we also include a power-law model with the exponent as a free parameter. We use a Bayesian analysis to assess the model success in reproducing empirical distributions of confirmed exoplanets and Kepler candidates that orbit interior to 0.1 AU. Our results confirm a correlation of the halting distance with stellar mass. Tidal halting provides the best fit to the empirical distribution of confirmed Jovian exoplanets at a statistically robust level, consistent with the Kozai mechanism and the spin-orbit misalignment of a substantial fraction of hot Jupiters. We can rule out migration halting at the interior 1:2 resonances with the magnetospheric disk truncation radius and the interior 1:2 resonance with the dust disk sublimation radius, a uniform random distribution, and a distribution with no dependence on stellar mass. Note that our results do not rule out Type-II migration, but rather eliminate the role of a circumstellar disk in stopping exoplanet migration. For Kepler candidates, which have a more restricted range in stellar mass compared to confirmed planets, we are unable to discern between the tidal dissipation and magnetospheric disk truncation braking mechanisms at a statistically significant level. The power-law model favors exponents in the range of 0.38-0.9. This is larger than that predicted for tidal halting (0.23-0.33), which suggests that additional physics may be missing in the tidal halting theory.

79 ASTRONOMY AND ASTROPHYSICS↗

Development, construction and tests of the Mu2e electromagnetic calorimeter mechanical structures

The “muon-to-electron conversion” (Mu2e) experiment at Fermilab will search for the charged lepton flavour violating neutrino-less coherent conversion of a muon into an electron in the field of an aluminum nucleus. The observation of this process would be the unambiguous evidence of the existence of physics beyond the standard model. Mu2e detectors comprise a straw-tracker, an electromagnetic calorimeter and an external veto for cosmic rays. In particular, the calorimeter provides excellent electron identification, a fast calorimetric online trigger, and complementary information to aid pattern recognition and track reconstruction. The detector has been designed as a state-of-the-art crystal calorimeter and employs 1348 pure Cesium Iodide (CsI) crystals readout by UV-extended silicon photosensors and fast front-end and digitization electronics. A design consisting of two identical annular matrices (named “disks”) positioned at the relative distance of 70 cm downstream the aluminum target along the muon beamline satisfies the Mu2e physics requirements. The hostile Mu2e operational conditions, in terms of radiation levels (total expected ionizing dose of 12 krad and a neutron fluence of 5 × 10$^{10}$ n/cm$^{2}$ @ 1 MeV$_{eq}$ (Si)/y), magnetic field intensity (1 T) and vacuum level (10$^{-4}$ Torr) have posed tight constraints on scintillating materials, sensors, electronics and on the design of the detector mechanical structures and material choice. The support structure of each 674 crystal matrix is composed of an aluminum hollow ring and parts made of open-cell vacuum-compatible carbon fiber. The photosensors and front-end electronics for the readout of each crystal are inserted in a machined copper holder and make a unique mechanical unit. The resulting 674 mechanical units are supported by a machined plate of vacuum-compatible plastic material. The plate also integrates the cooling system made of a network of copper lines flowing a low temperature radiation-hard fluid and placed in thermal contact with the copper holders to constitute a low resistance thermal bridge. The data acquisition electronics are hosted in aluminum custom crates positioned on the external lateral surface of the disks. The crates also integrate the electronics cooling system as lines running in parallel to the front-end system. In this paper we report on the calorimeter mechanical structure design, the mechanical and thermal simulations that have determined the design technological choices, and the status of component production, quality assurance tests and plans for assembly at Fermilab.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterization of edge damage induced on REBCO superconducting tape by mechanical slitting

Abstract Rare-earth barium-copper-oxide (REBCO) superconductors are high-field superconductors fabricated in a tape geometry that can be utilized in magnet applications well in excess of 20 T. Due to the multilayer architecture of the tape, delamination is one cause of mechanical failure in REBCO tapes. During a mechanical slitting step in the manufacturing process, edge cracks can be introduced into the tape. These cracks are thought to be potential initiation sites for crack propagation in the tapes when subjected to stresses in the fabrication and operation of magnet systems. We sought to understand which layers were the mechanically weakest by locating the crack initiation layer and identifying the geometrical conditions of the slitter that promoted or suppressed crack formation. The described cracking was investigated by selectively etching and characterizing each layer with scanning electron microscopy, laser confocal microscopy, and digital image analysis. Our analysis showed that the average crack lengths in the REBCO, LaMnO 3 (LMO) and Al 2 O 3 layers were 34 μ m, 28 μ m, and 15 μ m, respectively. The total number of cracks measured in 30 mm of wire length was between 3000 and 5700 depending on the layer and their crack densities were 102 cracks mm −1 for REBCO, 108 cracks mm −1 for LMO, and 183 cracks mm −1 for Al 2 O 3 . These results indicated that there are separate crack initiation mechanisms for the REBCO and the LMO layers, as detailed in the paper. With a better understanding of the crack growth behavior exhibited by REBCO tapes, the fabrication process can be improved to provide a more mechanically stable and cost-effective superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TEM Approaches for Microstructure-Informed Prediction of Mechanical Properties in Structural Alloys

Predicting the mechanical performance of structural alloys from their evolving microstructure remains a major challenge in materials science, particularly for nuclear structural materials, where irradiation-induced defects span multiple types and length scales and interact through complex mechanisms. The dispersed barrier hardening (DBH) [1] and Friedel–Kroupa–Hirsch (FKH) [2,3] models have been widely used to evaluate the hardening contributions of individual obstacles and to estimate tensile strength from quantified microstructures; however, when multiple size-dependent obstacles coexist and evolve, predicting temperature-dependent tensile strength becomes significantly more complex, and a fully consistent hardening model is still lacking. Transmission electron microscopy (TEM) plays a central role in refining hardening models and enabling predictive assessments of tensile strength evolution by providing quantitative characterization of dislocations, irradiation-induced defects (e.g., dislocation loops and cavities), precipitates, and grain structure (Fig. 1.). These experimentally measured defect densities are incorporated into physically based hardening models with size- and shape- dependent obstacle strengths [4], using root-sum-square superposition for obstacles of comparable strength and linear superposition for dissimilar ones [5]. In addition, recent advances in TEM [6-8], including high-resolution imaging, 4D-STEM strain mapping, EDS/EELS elemental analysis, and flash-polishing-based TEM specimen preparation and extraction-replica methods (Fig. 2), further improve the accuracy of microstructural quantification. By comparison with prior studies as well as our own results, we show that when TEM-derived microstructural information is carefully integrated with physically grounded hardening models, yield strength (or irradiation-induced hardening) measured at room temperature can be predicted with good quantitative agreement across multiple alloy classes. In-situ TEM combined with high-temperature mechanical testing represents an important next step for refining hardening models by directly probing dislocation–obstacle interactions across varying irradiation doses and temperatures [9]. Because the barrier strength factor (α) depends on both temperature and obstacle size, it should not be treated as a constant fitting parameter; rather, it must be explicitly evaluated to achieve physically meaningful predictions of mechanical behaviour at operating temperatures. This presentation therefore discusses why all strengthening contributions (e.g., Peierls stress, solid-solution strengthening, voids, bubbles, dislocation loops, dislocation lines, and grain boundaries) must be considered collectively, why appropriate superposition methods are essential when obstacles possess different barrier strength factors, how hardness measurements can be meaningfully related to tensile properties, and how TEM-derived microstructural information can be systematically incorporated into hardening models. More broadly, it outlines a pathway toward microstructure-informed prediction of mechanical properties and supports the goal of establishing science-based tools for evaluating structural materials in extreme environments [10].

Lin, Yan-Ru [ORNL] (ORCID:0000000339991473)↗

2022 Prentice Award Lecture: Advancing Retinal Imaging and Visual Function in Patient Management and Disease Mechanisms

Patient-based research plays a key role in probing basic visual mechanisms. Less-well recognized is the role of patient-based retinal imaging and visual function studies in elucidating disease mechanisms, which are accelerated by advances in imaging and function techniques and are most powerful when combined with the results from histology and animal models. A patient's visual complaints can be one key to patient management, but human data are also key to understanding disease mechanisms. Unfortunately, pathological changes can be difficult to detect. Before advanced retinal imaging, the measurement of visual function indicated the presence of pathological changes that were undetectable with existing clinical examination. Over the past few decades, advances in retinal imaging have increasingly revealed the unseen. This has led to great strides in the management of many diseases, particularly diabetic retinopathy and macular edema, and age-related macular degeneration. It is likely widely accepted that patient-based research, as in clinical trials, led to such positive outcomes. Both visual function measures and advanced retinal imaging have clearly demonstrated differences among retinal diseases. Contrary to initial thinking, sight-threatening damage in diabetes occurs to the outer retina and not only to the inner retina. This has been clearly indicated in patient results but has only gradually entered the clinical classifications and understanding of disease etiology. There is strikingly different pathophysiology for age-related macular degeneration compared with photoreceptor and retinal pigment epithelial genetic defects, yet research models and even some treatments confuse these. It is important to recognize the role that patient-based research plays in probing basic visual mechanisms and elucidating disease mechanisms, combining these findings with the concepts from histology and animal models. Thus, this article combines sample instrumentation from my laboratory and progress in the fields of retinal imaging and visual function.

60 APPLIED LIFE SCIENCES↗

Multiple double-exchange mechanism by Mn{sup 2+} doping in manganite compounds

Double-exchange (DE) mechanisms in RE{sub 1-x}AE{sub x}MnO{sub 3} manganites (where RE is a trivalent rare-earth ion and AE is a divalent alkali-earth ion) relies on the strong exchange interaction between two Mn{sup 3+} and Mn{sup 4+} ions through interfiling oxygen 2p states. Nevertheless, the role of RE and AE ions has ever been considered ''silent'' with respect to the DE conducting mechanisms. Here we show that a new path for DE mechanism is indeed possible by partially replacing the RE-AE elements by Mn{sup 2+} ions, in La-deficient La{sub x}MnO{sub 3-{delta}} thin films. X-ray absorption spectroscopy demonstrated the relevant presence of Mn{sup 2+} ions, which is unambiguously proved to be substituted at La site by resonant inelastic x-ray scattering. Mn{sup 2+} is proved to be directly correlated with the enhanced magnetotransport properties because of an additional hopping mechanism trough interfiling Mn{sup 2+} ions. Such a scenario has been theoretically confirmed by calculations within the effective single-band model. The use of Mn{sup 2+} both as a doping element and an ion electronically involved in the conduction mechanism reveals an unconventional phenomenon in transport properties of manganites. More important, such a strategy might be also pursed in other strongly correlated materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of mechanical and electronic properties of bent monolayer transition metal dichalcogenides

The mechanical and electronic properties of transition metal dichalcogenide (TMD) monolayers corresponding to transition groups IV, VI, and X are explored under mechanical bending from first principles calculations using the strongly constrained and appropriately normed (SCAN) meta-GGA. SCAN provides an accurate description of the phase stability of the TMD monolayers. Our calculated lattice parameters and other structural parameters agree well with experiment. We find that bending stiffness (or flexural rigidity) increases as the transition metal group goes from IV to X to VI, with the exception of PdTe 2 . Variation in mechanical properties (local strain, physical thickness) and electronic properties (local charge density, band structure) with bending curvature is discussed. The local strain profile of these TMD monolayers under mechanical bending is highly nonuniform. The mechanical bending tunes not only the thickness of the TMD monolayers, but also the local charge distribution as well as the band structures, adding more functionalization options to these materials.

36 MATERIALS SCIENCE↗

Mechanisms of adsorbing hydrogen gas on metal decorated graphene

Hydrogen is a key player in global strategies to reduce greenhouse gas emissions. In order to make hydrogen a widely used fuel, we require more efficient methods of storing it than the current standard of pressurized cylinders. An alternative method is to adsorb H 2 in a material and avoid the use of high pressures. Among many potential materials, layered materials such as graphene present a practical advantage as they are lightweight. However, graphene and other 2D materials typically bind H 2 too weakly to store it at the typical operating conditions of a hydrogen fuel cell, meaning that high pressure would still be required. Modifying the material, for example by decorating graphene with adatoms, can strengthen the adsorption energy of H 2 molecules, but the underlying mechanisms are still not well understood. In this work, we systematically screen alkali and alkaline-earth metal decorated graphene sheets for the static thermodynamic adsorption of hydrogen gas from first principles and focus on the mechanisms of binding. We show that there are three mechanisms of adsorption on metal decorated graphene and each leads to distinctly different hydrogen adsorption structures. The three mechanisms can be described as weak van der Waals physisorption, metal adatom facilitated polarization, and Kubas adsorption. Among these mechanisms, we find that Kubas adsorption is easily perturbed by an external electric field, providing a way to tune H 2 adsorption. In conclusion, this work is foundational and builds our understanding of H 2 adsorption under idealized conditions.

36 MATERIALS SCIENCE↗