Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Epitaxial growth of (001)-oriented Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films on a-plane sapphire with an MgO/ZnO bridge layer

High quality (001)-oriented Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} (BST) thin films have been grown on a-plane sapphire (1120) by rf magnetron sputtering using a double bridge layer consisting of (0001)-oriented ZnO (50 nm) and (001)-oriented MgO (10 nm) prepared by plasma-assisted molecular beam epitaxy. X-ray diffraction revealed the formation of three sets of in-plane BST domains, offset from one another by 30 deg., which is consistent with the in-plane symmetry of the MgO layer observed by in situ reflective high electron energy diffraction. The in-plane epitaxial relationship of BST, MgO, and ZnO has been determined to be BST [110]//MgO [110]//ZnO [1120] and BST [110]/MgO [110]//ZnO [1100]. Capacitance-voltage measurements performed on BST coplanar interdigitated capacitor structures revealed a high dielectric tunability of up to 84% at 1 MHz.

36 MATERIALS SCIENCE↗

Electric-field tuning of the metal-insulator transition in ultrathin films of LaNiO{sub 3}

Epitaxial ultrathin films of the metallic perovskite LaNiO{sub 3} were grown on (001) SrTiO{sub 3} substrates using off-axis rf magnetron sputtering. The film structure was characterized and their electrical properties investigated. Films thinner than 8 unit cells display a metal-insulator transition at a thickness dependent characteristic temperature. Hall measurements revealed p-type conduction, which was confirmed by electric field-effect experiments. Large changes in the transport properties and the metal-insulator transition temperature were observed for the thinnest LaNiO{sub 3} films as the carrier density was electrostatically tuned.

36 MATERIALS SCIENCE↗

Enhancement in the photocatalytic nature of nitrogen-doped PVD-grown titanium dioxide thin films

Nitrogen-doped titanium dioxide semiconductor photocatalytic thin films have been deposited by unbalanced reactive magnetron physical vapor deposition on glass substrates for self-cleaning applications. In order to increase the photocatalytic efficiency of the titania coatings, it is important to enhance the catalysts absorption of light from the solar spectra. Bearing this fact in mind, a reduction in the titania semiconductor band-gap has been attempted by using nitrogen doping from a coreactive gas mixture of N{sub 2}:O{sub 2} during the titanium sputtering process. Rutherford backscattering spectroscopy was used in order to assess the composition of the titania thin films, whereas heavy-ion elastic recoil detection analysis granted the evaluation of the doping level of nitrogen. X-ray photoelectron spectroscopy provided valuable information about the cation-anion binding within the semiconductor lattice. The as-deposited thin films were mostly amorphous, however, after a thermal annealing in vacuum at 500 deg. C the crystalline polymorph anatase and rutile phases have been developed, yielding an enhancement in the crystallinity. Spectroscopic ellipsometry experiments enabled the determination the refractive index of the thin films as a function of the wavelength, while from the optical transmittance it was possible to estimate the semiconductor indirect band-gap of these coatings, which has been proven to decrease as the N-doping increases. The photocatalytic performance of the titania films has been characterized by the degradation rate of an organic reactive dye under UV/visible irradiation. It has been found that for a certain critical limit of 1.19 at. % of nitrogen doping in the titania anatase crystalline lattice enhances the photocatalytic behavior of the thin films and it is in accordance with the observed semiconductor band-gap narrowing to 3.18 eV. By doping the titania lattice with nitrogen, the photocatalytic activity is enhanced under both UV and visible light.

36 MATERIALS SCIENCE↗

Amorphous silicon as electron transport layer for colloidal semiconductor nanocrystals light emitting diode

We demonstrate the fabrication of light-emitting diodes (LEDs) made from all-inorganic colloidal semiconducting nanocrystals (NCs). The diode utilizes a sandwich structure formed by placing CdSe/CdS NCs between two layers of Si and Ag{sub x}O, which act as electron- and hole-transporting materials, respectively. The photoluminescence properties of NCs are rendered less dependent upon surface chemistry and chemical environment by growing a thick CdS shell. It also enhances stability of the NCs during the process of magnetron sputtering for silicon deposition. The resulting LED device exhibits a low turn-on voltage of 2.5 V and the maximum external quantum efficiency of nearly 0.08%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modulating microstructure and magnetic properties of BaFe{sub 12}O{sub 19} thin films by using Pt and yttria stabilized zirconia underlayers

The c-axis oriented barium ferrite thin films were prepared by radio frequency magnetron sputtering on silicon substrates with a metal underlayer Pt (111) as well as an oxide underlayer yttria stabilized zirconia (YSZ). Microstructural studies (scanning electron microscopy, atomic force microscopy, and magnetic force microscopy) showed that the magnetic grains in BaM film have a strong relationship with the grains in the underlayer. The Pt underlayer is more effective in forming micrometer-sized and multidomain magnetic grains, which have high saturation magnetization but small coercivity and remanence of the BaM film. On the contrary, the YSZ underlayer is favorable to obtain nanometer-sized and monodomain magnetic grains, which lead to a slight decrease in saturation magnetization but dramatically increase coercivity and remanence of the BaM film. Hence, with careful selection of underlayer, it is feasible to obtain suitable magnetic grain size and domain structure of BaM films to satisfy special requirements.

36 MATERIALS SCIENCE↗

Magnetic properties of graded A1/L1{sub 0} films obtained by heat treatment of FePt/CoPt multilayers

Structurally gradient layered A1/L1{sub 0} films are obtained by heat treatment of magnetron sputter deposited FePt(20 nm)/CoPt(x nm) bilayers where x=0-120 nm. The magnetic properties can be tuned by adjustment of the layer thicknesses and taking advantage of the different heat-treatment temperatures required for the ordering of the L1{sub 0} phase between FePt and CoPt.

36 MATERIALS SCIENCE↗

Mechanisms of lighting enhancement of Al nanoclusters-embedded Al-doped ZnO film in GaN-based light-emitting diodes

Aluminum (Al)-doped ZnO (AZO) films with embedded Al nanoclusters were proposed and utilized to enhance the light output power and maximum operation current of GaN-based light-emitting diodes (LEDs). The AZO films were sputtered using ZnO and Al targets in a magnetron cosputtering system. With Al dc power of 7 W and ZnO 100 W ac power, the electron concentration of 4.1x10{sup 20} cm{sup -3}, electron mobility of 16.2 cm{sup 2}/V s, and resistivity of 7.2x10{sup -4} {Omega} cm were obtained for the deposited AZO film annealed at 600 deg. C for 1 min in a N{sub 2} ambient. As verified by a high resolution transmission electron microscopy, the deposited AZO films with embedded Al nanoclusters were clearly observed. A 35% increase in light output power of the GaN-based LEDs with Al nanoclusters-embedded AZO films was realized compared with the conventional LEDs operated at 500 mA. It was verified experimentally that the various characteristics of GaN-based LEDs including the antireflection, light scattering, current spreading, and the light extraction efficiency in light emission could be significantly enhanced with the use of Al nanoclusters-embedded AZO films.

36 MATERIALS SCIENCE↗

Highly efficient blue organic light emitting device using indium-free transparent anode Ga:ZnO with scalability for large area coating

The availability of economically-produced and environmentally-stable transparent conductive oxide (TCO) coatings is critical for the development of a variety of electronic devices requiring transparent electrodes. Such devices include liquid crystal display pixels and organic light emitting diodes (OLEDs),[1, 2] solar cell applications,[3, 4] and electrically heated windows.[5, 6] The materials fulfilling these requirements are usually wide band gap inorganic transparent conductive oxides (TCOs). Tin-doped indium oxide, or ITO, has traditionally been used for electronic TCO applications because of its low resistivity, high work function and transparency. Due to the increasing cost and limited supply of indium and its tendency to migrate in to the device, there has been increasing research interest to substitute ITO with an indium-free material. A number of alternative metal oxides and doped oxides have been evaluated as TCO materials with varying degrees of success.[7, 8] Among these alternatives to ITO, gallium-doped zinc oxide (GZO) [2, 9] and aluminium-doped zinc oxide (AZO) [10, 11] have drawn particular attention. These materials have been demonstrated to have resistivities and transparencies approaching those of the best ITO, low toxicity, and much lower materials cost. Although AZO is attractive as a TCO electrode material, GZO features a greater resistance to oxidation as a result of gallium’s greater electronegativity compared to Submitted to 2 aluminum.[12, 13

14 SOLAR ENERGY↗

Compositional effects on the growth of Mg(M)O films

The influence of the composition on the crystallographic properties of deposited Mg(M)O (with M=Al, Cr, Ti, Y, and Zr) films is studied. For a flexible control of the composition, dual reactive magnetron sputtering was used as deposition technique. Two different approaches to predict the composition are discussed. The first is an experimental way based on the simple relationship between the deposition rate and the target-substrate distance. The second is a route using a Monte Carlo based particle trajectory code. Both methods require a minimal experimental input and enable the user to quickly predict the composition of complex thin films. Good control and flexibility allow us to study the compositional effects on the growth of Mg(M)O films. Pure MgO thin films were grown with a (111) preferential out-of-plane orientation. When adding M to MgO, two trends were noticed. The first trend is a change in the MgO lattice parameters compared to pure MgO. The second tendency is a decrease in the crystallinity of the MgO phase. The experimentally determined crystallographic properties are shown to be in correspondence with the predicted properties from molecular dynamics simulations.

36 MATERIALS SCIENCE↗

Magnetostrictive and structural properties of FeCoGa films

Fe{sub 81-x}Co{sub x}Ga{sub 19} (with x ranging from 0 to 19 at. % Co) films were made by the dc magnetron sputtering method. We have studied the structural (phases, texturing, and grain size D), magnetic (saturation magnetostriction {lambda}{sub S} and coercivity H{sub C}), mechanical (Young's modulus E{sub f} and hardness H{sub f}), and electrical (electrical resistivity {rho}) properties of these films. The main results are as follows: (i) all the films are (110) textured; (ii) the bct phase (with twinned grains) coexists with the bcc phase only in the case of x{<=}3 at. % Co; (iii) {lambda}{sub S} increases steadily from 42 to 86 ppm, as x increases from 0 to 19 at. % Co; and (iv) {rho} reaches the saturation limit, about 200 {mu}{Omega} cm, when 19{>=}x{>=}15 at. % Co. In conclusion, we report that the Fe{sub 62}Co{sub 19}Ga{sub 19} film has the optimal magnetic, mechanical, and electrical properties among all the FeCoGa films measured.

36 MATERIALS SCIENCE↗

Influence of multiple magnetic phases on the extrinsic damping of FeCo-SiO{sub 2} soft magnetic films

In order to investigate the high-frequency damping properties of the ferromagnetic film for the electromagnetic shielding applications, a series of (FeCo){sub 2x}/(Fe){sub x}/(SiO{sub 2}){sub 1-3x} nanogranular films with various volume fractions (x) were fabricated by alternate triple-target magnetron sputtering. The (FeCo){sub 0.50}/Fe{sub 0.25}/(SiO{sub 2}){sub 0.25} film shows excellent soft magnetic properties (4{pi}M{sub s{approx}}1.48 T, H{sub ce{approx}}4.3 Oe, {rho}{approx}4.3 {mu}{Omega} m). In both ferromagnetic resonance (FMR) and frequency-dependent permeability spectra measurements, two resonance peaks of the permeability for this film are obtained, which can be attributed to the complicated magnetic structure of FeCo and Fe phases in the film. This multiphase system makes an additional contribution to the extrinsic damping. As a result, the higher natural resonance frequency f for the film is up to 2.75 GHz with full width at half maximum of about 2.5 GHz for the imaginary part {mu}{sup ||}; meanwhile, the real part {mu}{sup /} is as high as 650 while f<1.3 GHz. These films could be novel candidates for the electromagnetic shielding applications.

36 MATERIALS SCIENCE↗

Study of metal/ZnO based thin film ultraviolet photodetectors: The effect of induced charges on the dynamics of photoconductivity relaxation

Ultraviolet photoconductivity relaxation in ZnO thin films deposited by rf magnetron sputtering are investigated. Effect of oxygen partial pressure in the reactive gas mixture and film thickness on the photoconductivity transients is studied. A different photodetector configuration comprising ZnO thin film with an ultrathin overlayer of metals like Cu, Al, Sn, Au, Cr, and Te was designed and tested. Photoresponse signal were found to be stronger (four to seven times) in these configurations than the pure ZnO thin films. Sn(30 nm)/ZnO sample exhibits highest responsivity of {approx}8.57 kV/W whereas Te(20 nm)/ZnO structure presents highest sensitivity of {approx}31.3x10{sup 3} compared to unloaded ZnO thin film. Enhancement in the photoresponse of ZnO thin films is attributed to the change in surface conductivity due to induced charge carriers at the interface because of the difference in work function and oxygen affinity values of metal overlayer with the underlying semiconducting layer. Charge carrier transfer from the metal layer to ZnO creates a surplus of electrons at the interface; a fraction of which are captured by the defect centers (traps) at the surface whereas the remaining one represents free carriers in the conduction band and are responsible for the enhanced photoconductivity.

36 MATERIALS SCIENCE↗

Influence of the matrix properties on the performances of Er-doped Si nanoclusters light emitting devices

We investigated the properties of light emitting devices whose active layer consists of Er-doped Si nanoclusters (nc) generated by thermal annealing of Er-doped SiO{sub x} layers prepared by magnetron cosputtering. Differently from a widely used technique such as plasma enhanced chemical vapor deposition, sputtering allows to synthesize Er-doped Si nc embedded in an almost stoichiometric oxide matrix, so as to deeply influence the electroluminescence properties of the devices. Relevant results include the need for an unexpected low Si excess for optimizing the device efficiency and, above all, the strong reduction of the influence of Auger de-excitation, which represents the main nonradiative path which limits the performances of such devices and their application in silicon nanophotonics.

36 MATERIALS SCIENCE↗

Thin Dielectric Films Containing Tb{sup 3+} Ions For Application In Thin Film Solar Cells

Thin transparent dielectric films containing Tb{sup 3+} are developed for application as spectral converters of the solar spectrum in thin film silicon solar cells. The results on the deposition and characterization of thin SiO{sub 2} and Al{sub 2}O{sub 3} films containing Tb{sup 3+} ions are presented. The films are prepared by RF magnetron co-sputtering, a well established technique for large area coatings. Photoluminescence (PL) is measured at room temperature, using the 488 nm line of an Ar laser and a nitrogen-cooled CCD camera attached to a monochromator. The dependence of the PL intensity on the concentration of Tb in the film is studied. It is found that the intensity exhibits a maximum at about 1 at.%. Annealing studies are performed on SiO{sub 2}:Tb with two different methods to improve the PL intensity. In both regimes of annealing, the best results for thin SiO{sub 2}:Tb films are obtained in the temperature range of 650-700 deg. C. After treatment at this temperature the Tb PL increases 2.5-3 times.

36 MATERIALS SCIENCE↗

W-doped anatase TiO{sub 2} transparent conductive oxide films: Theory and experiment

W-doped anatase TiO{sub 2} films were deposited on glass substrate by magnetron cosputtering. The minimum resistivity, 1.5x10{sup -2} {Omega} cm, for Ti{sub 1-x}W{sub x}O{sub 2} film (x=0.063) was obtained. X-ray photoelectron spectroscopy analysis shows W incorporated in the Ti lattice position is mostly in the W{sup 6+} state. Theoretical calculations based upon the density-functional theory were applied to analyze the electronic structure and conducting mechanism. The strong hybridization of Ti 3d states with W 5d states is the dominate factor to cause the shifting in Fermi level into conduction band. Our results suggest that tungsten is a favorable dopant to form TiO{sub 2}-based transparent conducting oxide materials.

36 MATERIALS SCIENCE↗

Postannealing effect on properties of hydrogenated amorphous Si(Mn) magnetic semiconductors

Postannealing effect was studied on films of hydrogenated amorphous silicon with Mn addition grown by magnetron cosputtering. Structural, magnetic, and electrical properties were investigated. We did not detect any second phases or clusters after annealing. Annealing enhances saturation magnetization, electrical conductivity, and carrier concentration by about 250%, 350%, and two orders of magnitude, respectively. Anomalous Hall effect was observed at 100 K, indicating ferromagnetism mediated by charge carriers. Moreover, the hydrogen concentration was determined by elastic recoil detection methods. The results revealed that there is no hydrogen effusion during annealing. The reason of property enhancement by annealing arises from the thermal energy to promote hydrogen diffusion; hence, a more homogeneous distribution and lessens defect density.

36 MATERIALS SCIENCE↗

A Study on the Structural Change of Al--N Co-Doped ZnO Thin Films

The co-doped ZnO thin film were deposited by DC magnetron sputtering on silicon (111) followed by annealing treatment at 200 deg. C to 600 deg. C for 1 hour in nitrogen and oxygen gas mixture. Structural investigation was carried out by atomic force microscopy (AFM), scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) and X--ray diffraction (XRD). Film roughness (r.m.s) and grain shape were found to be correlated with the annealing temperatures. SEM result has shown that its surface characteristics are strongly influenced by annealing temperatures.

36 MATERIALS SCIENCE↗

The Electrical Properties of Co-Doped ZnO Thin Films

Codoped ZnO thin films were prepared on silicon (111) substrates by cosputtering of aluminium rods and zinc target using DC magnetron sputtering followed by heat treatment at 400 deg. C for 1 hour at different ratios of oxygen and nitrogen gas. Results indicate that gas ratios influenced the film conduction properties, which had the lowest resistivity of 7.985x10{sup -3} cm{sup -3} and highest carrier concentration of 6.89x10{sup 21} cm{sup -3}.

36 MATERIALS SCIENCE↗