Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “JuMP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Northeastern Center for Chemical Energy Storage (NECCES)

The chemical reactions that occur in batteries are complex, spanning a wide range of time and length scales from atomic jumps to the entire battery structure. The NECCES team of experimentalists and theorists made use of, and developed new methodologies to determine how model compound electrodes function in real time, as batteries are cycled. The team determined that kinetic control of intercalation reactions (reactions in which the crystalline structure is maintained) can be achieved by control of the materials morphology and explains and allows for the high rates of many intercalation reactions where the fundamental properties might indicate poor behavior in a battery application. The small overvoltage required for kinetic control is technically effective and economically feasible. A wide range of state-of-the-art operando techniques was developed to study materials under realistic battery conditions, which are now available to the scientific community. The team also investigated the key reaction steps in conversion electrodes, where the crystal structure is destroyed on reaction with lithium and rebuilt on lithium removal. These so-called conversion reactions have in principle much higher capacities, but were found to form very reactive discharge products that reduce the overall energy efficiency on cycling. It was found that by mixing either the anion, as in FeOF, or the cation, as in Cu1-yFeyF2, the capacity on cycling could be improved. The fundamental understanding of the reactions occurring in electrode materials gained in this study will allow for the development of much improved battery systems for energy storage. This will benefit the public in longer lived electronics, higher electric vehicle ranges at lower costs, and improved grid storage that also enables renewable energy supplies such as wind and solar.

25 ENERGY STORAGE↗

Collaborative development of the EPICS Qt framework Phase I Final Report

At Lyncean, a private company spun-off from technology developed at the SLAC National Lab, we have been using EPICS for over a decade. EPICS is ubiquitous on our flagship product – the Compact Light Source. EPICS is not only used to control our laser and accelerator systems, but also to control our x-ray beamlines. The goal of this SBIR is for Lyncean Technologies to spearhead a worldwide collaborative effort for the development of control system tools for EPICS using the Qt framework, a C++-based coding environment that could serve as a competitive alternative to the Java-based Control System Studio (CSS). This grant's Phase I, not unlike a feasibility study, is designed for planning and scoping the preparatory work needed for Phase II or other funding opportunities. The three main objectives of this Phase I are (1) to become better acquainted with the existing EPICS Qt software and Qt framework in order to evaluate the best options for ongoing development, (2) to demonstrate that our engineers can lead the EPICS community and jump-start the Qt collaboration, and (3) to identify a scope for our future work with solicited feedback from the EPICS community. This Phase I report includes key technical findings. It clarifies the differences between the two apparently-competing EPICS Qt implementations, caQtDM and the QE Framework; it explains how to create python-bindings, and compares Qt graphical libraries. But this report is also a personal story that narrates the birth of a collaboration. Starting a collaboration is not the work of a single individual, but the work of many. Therefore this report is also an attempt to publicly give credit to many who supported the effort. The main take-away from this grant is the successful birth of an EPICS Qt collaboration, seeded with existing software from the PSI and the Australian Synchrotron. But a lot more needs to be done for the collaboration founders' vision to be realized, and for the collaboration to reach its full potential. To help define the scope of future work, a useful approach we have identified is user experience design (UXD) and is discussed herein.

43 PARTICLE ACCELERATORS↗

Investigating the Effect of Pyridine Vapor Treatment on Perovskite Solar Cells (Abstract for a General Audience)

Solar power is an important and increasingly widespread form of renewable energy. If you’ve ever seen solar panels on someone’s roof, they are probably made with crystalline silicon. However, the possibility of creating cheaper and more efficient solar cells motivates scientists to continue searching for alternative materials. Perovskites are one of the newest and most promising solar cell materials: they have seen incredible efficiency gains in just a few years, jumping from 3.8% in 2009 to over 20% in 2014. Even though there’s been progress in improving perovskite-based device efficiency, there are many fundamental aspects of perovskite formation that are still not fully understood. The overall aim of my research is to study these processes and help fill in some of the knowledge gaps.

14 SOLAR ENERGY↗

Threatened and Endangered Species Habitat Management Plan for Los Alamos National Laboratory

Los Alamos National Laboratory’s (LANL) Threatened and Endangered Species Habitat Management Plan (HMP) fulfills a commitment made to the U.S. Department of Energy (DOE) in the “Final Environmental Impact Statement for the Dual-Axis Radiographic Hydrodynamic Test Facility Mitigation Action Plan” (DOE 1996). The HMP received concurrence from the U.S. Fish and Wildlife Service (USFWS) in 1999 (USFWS consultation numbers 2-22-98-I-336 and 2-22-95-I-108). This 2015 update retains the management guidelines from the 1999 HMP for listed species, updates some descriptive information, and adds the New Mexico Meadow Jumping Mouse (Zapus hudsonius luteus) and Yellow-billed Cuckoo (Coccyzus americanus) which were federally listed in 2014 (Keller 2015: USFWS consultation number 02ENNM00- 2015-I-0538).

54 ENVIRONMENTAL SCIENCES↗

SNL/SRNL Joint Project on degradation of mechanical properties in structural metals and welds for GTS reservoirs.

This project was intended to enable SNL-CA to produce appropriate specimens of relevant stainless steels for testing and perform baseline testing of weld heat-affected zone and weld fusion zone. One of the key deliverables in this project was to establish a procedure for fracture testing stainless steel weld fusion zone and heat affected zones that were pre-charged with hydrogen. Following the establishment of the procedure, a round robin was planned between SNL-CA and SRNL to ensure testing consistency between laboratories. SNL-CA and SRNL would then develop a comprehensive test plan, which would include tritium exposures of several years at SRNL on samples delivered by SNL-CA. Testing would follow the procedures developed at SNL-CA. SRNL will also purchase tritium charging vessels to perform the tritium exposures. Although comprehensive understanding of isotope-induced fracture in GTS reservoir materials is a several year effort, the FY15 work would enabled us to jump-start the tests and initiate long-term tritium exposures to aid comprehensive future investigations. Development of a procedure and laboratory testing consistency between SNL-CA and SNRL ensures reliability in results as future evaluations are performed on aluminum alloys and potentially additively-manufactured components.

36 MATERIALS SCIENCE↗

Verification and Validation of a Coordinate Transformation Method in Axisymmetric Transient Magnetics.

We present a verification and validation analysis of a coordinate-transformation-based numerical solution method for the two-dimensional axisymmetric magnetic diffusion equation, implemented in the finite-element simulation code ALEGRA. The transformation, suggested by Melissen and Simkin, yields an equation set perfectly suited for linear finite elements and for problems with large jumps in material conductivity near the axis. The verification analysis examines transient magnetic diffusion in a rod or wire in a very low conductivity background by first deriving an approximate analytic solution using perturbation theory. This approach for generating a reference solution is shown to be not fully satisfactory. A specialized approach for manufacturing an exact solution is then used to demonstrate second-order convergence under spatial refinement and tem- poral refinement. For this new implementation, a significant improvement relative to previously available formulations is observed. Benefits in accuracy for computed current density and Joule heating are also demonstrated. The validation analysis examines the circuit-driven explosion of a copper wire using resistive magnetohydrodynamics modeling, in comparison to experimental tests. The new implementation matches the accuracy of the existing formulation, with both formulations capturing the experimental burst time and action to within approximately 2%.

97 MATHEMATICS AND COMPUTING↗

Efficient Adjoint Computation of Hybrid Systems of Differential Algebraic Equations with Applications in Power Systems

Sensitivity analysis is an important tool to describe power system dynamic behavior in response to parameter variations. It is a central component in preventive and corrective control applications. The existing approaches for sensitivity calculations, namely, finite-difference and forward sensitivity analysis, require a computational effort that increases linearly with the number of sensitivity parameters. In this work, we investigate, implement, and test a discrete adjoint sensitivity approach whose computational effort is effectively independent of the number of sensitivity parameters. The proposed approach is highly efficient for calculating trajectory sensitivities of larger systems and is consistent, within machine precision, with the function whose sensitivity we are seeking. This is an essential feature for use in optimization applications. Moreover, our approach includes a consistent treatment of systems with switching, such as DC exciters, by deriving and implementing the adjoint jump conditions that arise from state and time-dependent discontinuities. The accuracy and the computational efficiency of the proposed approach are demonstrated in comparison with the forward sensitivity analysis approach.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Intermetallic Strengthened Alumina-Forming Austenitic Steels for Energy Applications

In order to achieve energy conversion efficiencies of >50 % for steam turbines/boilers in power generation systems, the materials required must be strong, corrosion-resistant at high temperatures (>700°C), and economically viable. Austenitic steels strengthened with Laves phase and L1 2 precipitates, and alloyed with aluminum to improve oxidation resistance, are potential candidate materials for these applications. The creep resistance of these alloys is significantly improved through intermetallic strengthening (Laves-Fe 2 Nb + L1 2 -Ni 3 Al precipitates) without harmful effects on oxidation resistance. Microstructural and microchemical analyses of the recently developed alumina-forming austenitic (AFA) steels (Fe-14Cr-32Ni-3Nb-3Al-2Ti-based) indicated they are strengthened by Ni 3 Al(Ti) L1 2 , NiAl B 2 , Fe 2 Nb Laves phase and MC carbide precipitates. Different thermomechanical treatments (TMTs) were performed on these stainless steels in an attempt to further improve their mechanical properties. The thermo-mechanical processing produced nanocrystalline grains in AFA alloys and dramatically increased their yield strength at room temperature. Unfortunately, the TMTs didn’t increase the yield strengths of AFA alloys at ≥700ºC. At these temperatures, dislocation climb is the dominant mechanism for deformation of TMT alloys according to strain rate jump tests. After the characterization of aged AFA alloys, we found that the largest strengthening effect from L1 2 precipitates can be obtained by aging for less than 24 h. The coarsening behavior of the L1 2 precipitates was not influenced by carbon and boron additions. Failure analysis and post-mortem TEM analysis were performed to study the creep failure mechanisms of these AFA steels after creep tests. Though the Laves and B2-NiAl phase precipitated along the boundaries can improve the creep properties, cracks were still initiated and propagated along the boundaries, which suggests that the boundaries are still the weaker regions for causing fracture during creep, possibly due to the presence of a precipitatefree zone. The precipitate size distribution and kinetics of precipitate growth were quantified.

36 MATERIALS SCIENCE↗

Determination of the Economic Viability & Technical Feasibility of Commercial Jatropha Curcas Production for Generation of Jatropha oil as Bio-Fuel Feedstock from Wasteland: Final Technical Report on Life Cycle Impact Assessment of Jatropha Cultivation

Ever since it was demonstrated that Jatropha seed oil could be converted into a world class biodiesel and could run in unmodified stationary and mobile diesel engines with simultaneous reduction in emissions, it caught the attention of the world. The capability to grow this crop on wastelands added to its attractiveness. However, the single biggest challenge came in the form of the availability of adequate feed stock in the form of the Jatropha fruit. Adequacy of feed stock can only be possible if large plantations are cultivated and produce enough fruit. The people, world over, jumped into Jatropha cultivation without heeding to the need to first ensure quality germplasm and understand the agronomic requirements of the plants. As a result many plantations failed to give the required yield. CSIR-CSMCRI had been researching Jatropha and had an end-to-end approach, i.e., it developed the best technology to prepare biodiesel and also worked towards the practical problems that it envisaged to be important for raising Jatropha productivity. It focused only on cultivation on wastelands as this was the only practical strategy, given the limited arable land India has and the risk of food security for the burgeoning population. While working in this direction, the Institute zeroed-in on a few germplasm, which gave consistently higher seed yield over several years. These germplasm were clonally propagated in large numbers to be raised in experimental plantations at different geographical locations in India. Many agronomic practices were developed as a part of these different projects. It was at this juncture that General Motors and the U.S. Department of Energy joined hands with CSIR-CSMCRI to further the work on Jatropha. A center of expertise for Jatropha was established and work was initiated to further refine the understanding regarding the best practices. Efforts were to be made to generate primary data, hitherto unavailable for wastelands, on which life cycle assessment studies were to be performed as a part of the project.

09 BIOMASS FUELS↗

Computational Mechanics for Heterogeneous Materials

The subject of this work is the development of models for the numerical simulation of matter, momentum, and energy balance in heterogeneous materials. These are materials that consist of multiple phases or species or that are structured on some (perhaps many) scale(s). By computational mechanics we mean to refer generally to the standard type of modeling that is done at the level of macroscopic balance laws (mass, momentum, energy). We will refer to the flow or flux of these quantities in a generalized sense as transport. At issue here are the forms of the governing equations in these complex materials which are potentially strongly inhomogeneous below some correlation length scale and are yet homogeneous on larger length scales. The question then becomes one of how to model this behavior and what are the proper multi-scale equations to capture the transport mechanisms across scales. To address this we look to the area of generalized stochastic process that underlie the transport processes in homogeneous materials. The archetypal example being the relationship between a random walk or Brownian motion stochastic processes and the associated Fokker-Planck or diffusion equation. Here we are interested in how this classical setting changes when inhomogeneities or correlations in structure are introduced into the problem. Aspects of non-classical behavior need to be addressed, such as non-Fickian behavior of the mean-squared-displacement (MSD) and non-Gaussian behavior of the underlying probability distribution of jumps. We present an experimental technique and apparatus built to investigate some of these issues. We also discuss diffusive processes in inhomogeneous systems, and the role of the chemical potential in diffusion of hard spheres is considered. Also, the relevance to liquid metal solutions is considered. Finally we present an example of how inhomogeneities in material microstructure introduce fluctuations at the meso-scale for a thermal conduction problem. These fluctuations due to random microstructures also provide a means of characterizing the aleatory uncertainty in material properties at the mesoscale.

36 MATERIALS SCIENCE↗

What Do Owls, Salamanders, Flycatchers and Cuckoos Have In Common?

This is an article from the Los Alamos Living magazine. Los Alamos National Laboratory sits on a beautiful and unique landscape that provides important protected habitat to many species, including a few that are federally-listed as threatened or endangered. These species are the Jemez Mountains Salamander, the Mexican Spotted Owl, the Southwestern Willow Flycatcher, the Yellow-billed Cuckoo, and the New Mexico Meadow Jumping Mouse. Part of the job of the Laboratory's wildlife biologists is to survey for these species each year and determine what actions need to be taken if they are found.

59 BASIC BIOLOGICAL SCIENCES↗

Mississippi Renewable Energy and Energy Efficiency Report. A snap shot of related activities in the state of Mississippi

In recent years, due to concerns over national security from both economic and military standpoints, increased attention has been given to the production of renewable energy in order to reduce American dependence on foreign supplies of energy. These concerns, along with those related to the effect of fossil fuels on the environment, have served to heighten the enthusiasm for finding replacements for traditional energy sources, along with helping to highlight the need for energy efficiency in American homes and businesses. Throughout the nation, this has been exemplified in an increased entrepreneurial activity to produce liquid fuels, thermal energy and electricity from a vast range of sources such as plants, trees, bacteria, the sun, wind, waves and the Earth itself. Coupled with tax subsidies, loan guarantees, renewable fuel standards, and various other government incentives and legislative encouragements we have seen a big jump in the production of renewable energy in the United States in the last ten years. But we are just getting started!

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DESALINATION AND WATER TREATMENT RESEARCH AT SANDIA NATIONAL LABORATORIES.

Water is the backbone of our economy - safe and adequate supplies of water are vital for agriculture, industry, recreation, and human consumption. While our supply of water today is largely safe and adequate, we as a nation face increasing water supply challenges in the form of extended droughts, demand growth due to population increase, more stringent health-based regulation, and competing demands from a variety of users. To meet these challenges in the coming decades, water treatment technologies, including desalination, will contribute substantially to ensuring a safe, sustainable, affordable, and adequate water supply for the United States. This overview documents Sandia National Laboratories' (SNL, or Sandia) Water Treatment Program which focused on the development and demonstration of advanced water purification technologies as part of the larger Sandia Water Initiative. Projects under the Water Treatment Program include: (1) the development of desalination research roadmaps (2) our efforts to accelerate the commercialization of new desalination and water treatment technologies (known as the 'Jump-Start Program),' (3) long range (high risk, early stage) desalination research (known as the 'Long Range Research Program'), (4) treatment research projects under the Joint Water Reuse & Desalination Task Force, (5) the Arsenic Water Technology Partnership Program, (6) water treatment projects funded under the New Mexico Small Business Administration, (7) water treatment projects for the National Energy Technology Laboratory (NETL) and the National Renewable Energy Laboratory (NREL), (8) Sandia- developed contaminant-selective treatment technologies, and finally (9) current Laboratory Directed Research and Development (LDRD) funded desalination projects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytic Evolution of Singular Distribution Amplitudes in QCD

Distribution amplitudes (DAs) are the basic functions that contain information about the quark momentum. DAs are necessary to describe hard exclusive processes in quantum chromodynamics. We describe a method of analytic evolution of DAs that have singularities such as nonzero values at the end points of the support region, jumps at some points inside the support region and cusps. We illustrate the method by applying it to the evolution of a at (constant) DA, antisymmetric at DA, and then use the method for evolution of the two-photon generalized distribution amplitude. Our approach to DA evolution has advantages over the standard method of expansion in Gegenbauer polynomials [1, 2] and over a straightforward iteration of an initial distribution with evolution kernel. Expansion in Gegenbauer polynomials requires an infinite number of terms in order to accurately reproduce functions in the vicinity of singular points. Straightforward iteration of an initial distribution produces logarithmically divergent terms at each iteration. In our method the logarithmic singularities are summed from the start, which immediately produces a continuous curve. Afterwards, in order to get precise results, only one or two iterations are needed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Milestone Completion Report WBS 1.3.5.05 ECP/VTK-m FY17Q2 [MS-17/01] Better Dynamic Types Design SDA05-1

The FY17Q2 milestone of the ECP/VTK-m project, which is the first milestone, includes the completion of design documents for the introduction of virtual methods into the VTK-m framework. Specifically, the ability from within the code of a device (e.g. GPU or Xeon Phi) to jump to a virtual method specified at run time. This change will enable us to drastically reduce the compile time and the executable code size for the VTK-m library. Our first design introduced the idea of adding virtual functions to classes that are used during algorithm execution. (Virtual methods were previously banned from the so called execution environment.) The design was straightforward. VTK-m already has the generic concepts of an “array handle” that provides a uniform interface to memory of different structures and an “array portal” that provides generic access to said memory. These array handles and portals use C++ templating to adjust them to different memory structures. This composition provides a powerful ability to adapt to data sources, but requires knowing static types. The proposed design creates a template specialization of an array portal that decorates another array handle while hiding its type. In this way we can wrap any type of static array handle and then feed it to a single compiled instance of a function. The second design focused on the mechanics of implementing virtual methods on parallel devices with a focus on CUDA. Our initial experiments on CUDA showed a very large overhead for using virtual C++ classes with virtual methods, the standard approach. Instead, we are using an alternate method provided by C that uses function pointers. With the completion of this milestone, we are able to move to the implementation of objects with virtual (like) methods. The upshot will be much faster compile times and much smaller library/executable sizes.

97 MATHEMATICS AND COMPUTING↗

The FFAG return loop for the CBETA Energy Recovery Linac

The CBETA energy recovery linac uses a single xed eld alternating gradient (FFAG) beam line to return the beam for electron beams with four energies, ranging from 42 MeV to 150 MeV. To keep the beam line compact, the ends of the return line have a small radius of curvature, but the central part of the return line is straight. These are connected by transition lines that adiabatically change from one to the other. We rst describe the design or the arc cell. We then describe how a straight cell is created to be a good match to this arc cell. We then describe the design of the transition line between them. The design process makes use of eld maps for the desired magnets. Because we switch magnet types as we move from the arc, through the transition, and into the straight, there are discrete jumps in the elds that degrade the adiabaticity of the transition, and we describe corrections to manage that.

43 PARTICLE ACCELERATORS↗

Smart Matrix Development for Direct Carbonate Fuel Cell

FCE’s (FuelCell Energy, Inc.) SureSourceTM products based on high-temperature internal-reforming direct carbonate fuel cell (DFC®) technology are striving to meet growing worldwide demand for high-efficiency ultra-clean power for on-site electric and combined heat and power (CHP) generation. It promises ~20% higher energy conversion efficiency than existing technologies and its large-scale deployment would help to reduce GHG (Green House Gas) emission. In this program, FCE, teamed with University of Connecticut (UConn) and Illinois Institute of Technology (IIT), successfully developed an innovative electrolyte matrix (dubbed smart matrix since it promises higher power output, longer service life, and cost reduction gains concurrently) to enable the products to worldwide deployment. The electrolyte membrane (matrix) holds a very important key to fulfill these promises. The matrix, a porous microstructure consisting mainly of ultra-fine sub-micron α-LiAlO 2 powders sandwiched between two electrodes, immobilizes liquid electrolyte, isolates fuel from oxidant and facilitates ionic transport. However, faster coarsening of α-LiAlO 2 at the reducing anode side lowers capillary electrolyte-retention and eventually leads to matrix drying, limiting stack service life. This program, spanning over 3.5 years, successfully developed a high-yield cost-effective commercial-ready smart matrix with robust and stable fine-pore microstructure to enable the SureSource plants meeting DOE 2020 targets for CHP distributed generation fuel cell systems. Fundamental coarsening mechanism was established by investigating in detail the effects of electrolyte chemistry, powder morphology, powder purity, electrolyte chemistry, gas atmosphere and temperature. More stable powders with higher crystallinity, less surface disorder, less metastable impurities, less agglomeration and more uniform particle-size distribution have improved stability. FCE devised an innovative cost-effective additive approach to disrupt the fundamental coarsening process to enhance stability. The smart matrix design was validated in numerous long-term accelerated single cells and several 30kW technology stacks, many operated for >5,000 hours. Manufacturing process was successfully optimized to produce high-yield full-area (1 m 2 ) product-size smart matrices. Field deployment has been initiated. Successful development of this innovative smart matrix enables a quantum jump in useful life (100%) and power output (>20%). These improvements may project to >20% lower COE (Cost of Electricity) making the SureSource highly competitive with U.S. grid electricity cost leading to large-scale deployment, realizing the U.S. Government’s energy, environment, and economic agenda.

03 NATURAL GAS↗

Solar Market Pathways Final Report

The Solar Market Pathways program supported the development of successful and replicable solar deployment plans and strategies, and inspired and helped others across the country initiate or improve their own solar strategies based on lessons learned and promising practices. This report shares how the Institute for Sustainable Communities (ISC), as the national coordinator, created and fostered a strong peer network that enabled the transfer of ideas, peer support, and lessons learned between Solar Market Pathways projects. This network accelerated learning and allowed awardees to advance their innovations—building on each other’s successes and mistakes, and effectively streamlining resource use. Within this report, we document the project results and impacts of Solar Market Pathways, which are broad reaching and include jump-starting the community solar market in the Chicago region, creating comprehensive deployment plans in nascent markets in Duluth and Utah, facilitating regional market development in the northeast, and using solar+storage to build community resilience in cities like New York and San Francisco.

14 SOLAR ENERGY↗