Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ising”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Comparison of CME masses and kinetic energies near the Sun and in the inner heliosphere

Masses have now been determined for many of the CMEs observed in the inner heliosphere by the HELIOS 1 and 2 zodiacal light photometers. The speed of the brightest material of each CME has also been measured so that, for events having both mass and speed determinations, the kinetic energies of the CMEs are estimated. We compare the masses and kinetic energies of the individual CMEs measured in the inner heliosphere by HELIOS and near the Sun from observations by the SOLWIND (1979-1983) and SMM coronagraphs (1980). Where feasible we also compare the speeds of the same CMEs. We find that the HELIOS masses and energies tend to be somewhat larger by factors of 2-5 than those derived from the coronagraph data. We also compare the distribution of the masses and energies of the HELIOS and coronagraph CMEs over the solar cycle. These results provide an important baseline for observations of CMEs from coronagraphs, from the ISEE-3/ICE, WIND and Ulysses spacecraft and in the future from SOHO.

Webb, D. F.↗

Interplanetary space science data base and access/display tool on the NSSDC heliospheric CD-ROM

The National Space Science Data Center (NSSDC) has accumulated a rich archive of heliospheric, magnetospheric, and ionospheric data, as well as data from most other NASA-involved science disciplines. To facilitate access to and use of these data, NSSDC has begun to put selected data onto CD-ROM's. This paper describes one such CD-ROM, and the access and display software developed at NSSDC to support its use. The data on the CD-ROM consist primarily of hourly solar wind magnetic field and plasma data from many near-Earth spacecraft (OMNI) and deep space spacecraft (Voyagers, Pioneers, Helios, Pioneer Venus Orbiter). In addition, 5-minute resolution IMP-8 and ISEE-3 magnetic field and plasma data are also included. Data are stored in both ASCII and CDF formats.

Papitashvili, N. E.↗

Orientation and velocity dependence of the nonequilibrium partition coefficient

Monte Carlo simulations based on a Spin-1 Ising Model for binary alloys have been used to investigate the non-equilibrium partition coefficient (k(sub neq)) as a function of solid-liquid interface velocity and orientation. In simulations of Si with a second component k(sub neq) is greater in the [111] direction than the [100] direction in agreement with experimental results reported by Azlz et al. The simulated partition coefficient scales with the square of the step velocity divided by the diffusion coefficient of the secondary component in the liquid.

Beatty, K. M.↗

SPE OBOGS: On-board Oxygen Generating System

Regulations require oxygen usage by commercial airliners during check out and during certain aircraft configurations. This oxygen is drawn from a high pressure on-board cylinder storage system. In a typical aircraft, oxygen cylinder removal for oxygen ground servicing is conducted every 4 to 6 weeks. In the early 1990's, it was recognized that an on-board oxygen generating system (OBOGS) could provide an economic advantage for the airlines. An in-flight service evaluation (ISE) of the SPE-OBOGS by United Technologies Corporate is in the planning stage.

Smith, William F.↗

The Archive of the Amateur Observation Network of the International Halley Watch: Comet Giacobini-Zinner - Volume 1

The International Halley Watch (IHW) was organized for the purpose of gathering and archiving the most complete record of the apparition of a comet, Halley's Comet (1982i = 1986 III = 1P/Halley), ever compiled. The redirection of the International Sun-Earth Explorer 3 (ISEE-3) spacecraft, subsequently renamed the International Cometary Explorer (ICE), toward Comet Giacobini-Zinner (1984e = 1985 XIII = 21P/Giacobini-Zinner) prompted the initiation of a formal watch on that comet. All the data collected on P/Giacobini-Zinner and P/Halley have been published on CD-ROM in the Comet Halley Archive. This document contains a printed version of the archive data, collected by amateur astronomers, on these two comets. Volume 1 contains the Comet Giacobini-Zinner data archive and Volume 2 contains the Comet Halley archive. Both volumes include information on how to read the data in both archives, as well as a history of both comet watches (including the organizing of the network of astronomers and lessons learned from that experience).

Edberg, Stephen J.↗

The Archive of the Amateur Observation Network of the International Halley Watch: Comet Halley - Volume 2

The International Halley Watch (IHW) was organized for the purpose of gathering and archiving the most complete record of the apparition of a comet, Halley's Comet (1982i = 1986 III = 1P/Halley), ever compiled. The redirection of the International Sun-Earth Explorer 3 (ISEE-3) spacecraft, subsequently renamed the International Cometary Explorer (ICE), toward Comet Giacobini- Zinner (1984e = 1985 XIII = 21P/Giacobini-Zinner) prompted the initiation of a formal watch on that comet. All the data collected on P/Giacobini-Zinner and P/Halley have been published on CD-ROM in the Comet Halley Archive. This document contains a printed version of the archive data, collected by amateur astronomers, on these two comets. Volume 1 contains the Comet Giacobini-Zinner data archive and Volume 2 contains the Comet Halley archive. Both volumes include information on how to read the data in both archives, as well as a history of both comet watches (including the organizing of the network of astronomers and lessons learned from that experience).

Edberg, Stephen J.↗

The role of impulsive particle acceleration in magnetotail circulation

Recent results from investigations carried out using the active magnetospheric particle tracer explorer/ion release module (AMPTE/IRM) satellite and International Sun-Earth Explorer (ISEE) show that bursty, near-neutral sheet fast flows are an important part of the transport in the near-earth tail. The results related to such flows are reviewed, and information is presented on their relation to the average plasma sheet characteristics and substorms. The average ion density, temperature and flow variability in the quiet inner plasma sheet exhibit a spatial dependence which suggests a dependence on Bursty Bulk Flows (BBFs). The energy and flux transport in the tail is discussed and it is stated that BBFs are responsible for such transport. The tailward progression of activity is considered.

Angelopoulos, V.↗

Monte Carlo Simulation of the Rapid Crystallization of Bismuth-Doped Silicon

In this Letter we report Ising model simulations of the growth of alloys which predict quite different behavior near and far from equilibrium. Our simulations reproduce the phenomenon which has been termed 'solute trapping,' where concentrations of solute, which are far in excess of the equilibrium concentrations, are observed in the crystal after rapid crystallization. This phenomenon plays an important role in many processes which involve first order phase changes which take place under conditions far from equilibrium. The underlying physical basis for it has not been understood, but these Monte Carlo simulations provide a powerful means for investigating it.

Jackson, Kenneth A.↗

Composition Measurements at the Magnetopause and in the Plasma Mantle

This final report describes activities under NASA grant NAGW-4049 to Lockheed Missiles and Space Company. The report covers the entire period of the grant from 15 August 1994 to 31 January 1998. The original grant was for 3 years ending in August 1997; however the grant was extended 6 months to accomodate additional data analysis that added significantly to the scientific results. This is a grant under the NASA Supporting Research and Technology Program for the analysis and interpretation of the combined scientific data from the ISEE-1 Plasma Composition Experiment and the AMPTE/CCE Hot Plasma Composition Experiment. These combined data sets were used in a study of the Earth's magnetopause to develop a fundamental understanding of plasma entry and dynamics at the boundary and formation and maintenance of the low latitude boundary layer under a variety of solar wind and magnetospheric conditions and at a wide range of local times.

Gary, S. P.↗

First Test of Stochastic Growth Theory for Langmuir Waves in Earth's Foreshock

This paper presents the first test of whether stochastic growth theory (SGT) can explain the detailed characteristics of Langmuir-like waves in Earth's foreshock. A period with unusually constant solar wind magnetic field is analyzed. The observed distributions P(logE) of wave fields E for two intervals with relatively constant spacecraft location (DIFF) are shown to agree well with the fundamental prediction of SGT, that P(logE) is Gaussian in log E. This stochastic growth can be accounted for semi-quantitatively in terms of standard foreshock beam parameters and a model developed for interplanetary type III bursts. Averaged over the entire period with large variations in DIFF, the P(logE) distribution is a power-law with index approximately -1; this is interpreted in terms of convolution of intrinsic, spatially varying P(logE) distributions with a probability function describing ISEE's residence time at a given DIFF. Wave data from this interval thus provide good observational evidence that SGT can sometimes explain the clumping, burstiness, persistence, and highly variable fields of the foreshock Langmuir-like waves.

Cairns, Iver H.↗

Ion Acoustic Wave Frequencies and Onset Times During Type 3 Solar Radio Bursts

Conflicting interpretations exist for the low-frequency ion acoustic (S) waves often observed by ISEE 3 in association with intense Langmuir (L) waves in the source regions of type III solar radio bursts near 1 AU. Two indirect lines of observational evidence, as well as plasma theory, suggest they are produced by the electrostatic (ES) decay L yields L(PRIME) + S. However, contrary to theoretical predictions, an existing analysis of the wave frequencies instead favors the electromagnetic (EM) decays L yields T + S, where T denotes an EM wave near the plasma frequency. This conflict is addressed here by comparing the observed wave frequencies and onset times with theoretical predictions for the ES and EM decays, calculated using the time-variable electron beam and magnetic field orientation data, rather than the nominal values used previously. Field orientation effects and beam speed variations are shown analytically to produce factor-of-three effects, greater than the difference in wave frequencies predicted for the ES and EM decays; effects of similar magnitude occur in the events analyzed here. The S-wave signals are extracted by hand from a sawtooth noise background, greatly improving the association between S waves and intense L waves. Very good agreement exists between the time-varying predictions for the ES decay and the frequencies of most (but not all) wave bursts. The waves occur only after the ES decay becomes kinematically allowed, which is consistent with the ES decay proceeding and producing most of the observed signals. Good agreement exists between the EM decay's predictions and a significant fraction of the S-wave observations while the EM decay is kinematically allowed. The wave data are not consistent, however, with the EM decay being the dominant nonlinear process. Often the observed waves are sufficiently broadband to overlap simultaneously the frequency ranges predicted for the ES and EM decays. Coupling the dominance of the ES decay with this frequency overlap provides support for a previous suggestion that fundamental emission occurs when the EM decay is stimulated by the ES decay product waves. The periods in which the ES and EM decays produce observable S waves are consistent with the observed and (independently) predicted times of fundamental and harmonic radio emission. This supports interpretation of fundamental emission as stimulated EM decay and harmonic emission as the coalescence L + L(prime) yields T of beam-generated L waves and L(prime) waves produced by the ES decay, where T denotes an electromagnetic wave at twice the plasma frequency. Analysis of the electron beam data reveals that the time-varying beam speed is consistent with ballistic beam propagation with minimal energy loss, implying that the beam propagates in a state close to time- and volume-averaged marginal stability. This confirms a central tenet of the stochastic growth theory for type III bursts.

Cairns, Iver H.↗

Foreshock Langmuir Waves for Unusually Constant Solar Wind Conditions: Data and Implications for Foreshock Structure

Plasma wave data are compared with ISEE 1's position in the electron foreshock for an interval with unusually constant (but otherwise typical) solar wind magnetic field and plasma characteristics. For this period, temporal variations in the wave characteristics can be confidently separated from sweeping of the spatially varying foreshock back and forth across the spacecraft. The spacecraft's location, particularly the coordinate D(sub f) downstream from the foreshock boundary (often termed DIFF), is calculated by using three shock models and the observed solar wind magnetometer and plasma data. Scatterplots of the wave field versus D(sub f) are used to constrain viable shock models, to investigate the observed scatter in the wave fields at constant D(sub f), and to test the theoretical predictions of linear instability theory. The scatterplots confirm the abrupt onset of the foreshock waves near the upstream boundary, the narrow width in D(sub f) of the region with high fields, and the relatively slow falloff of the fields at large D(sub f), as seen in earlier studies, but with much smaller statistical scatter. The plots also show an offset of the high-field region from the foreshock boundary. It is shown that an adaptive, time-varying shock model with no free parameters, determined by the observed solar wind data and published shock crossings, is viable but that two alternative models are not. Foreshock wave studies can therefore remotely constrain the bow shock's location. The observed scatter in wave field at constant D(sub f) is shown to be real and to correspond to real temporal variations, not to unresolved changes in D(sub f). By comparing the wave data with a linear instability theory based on a published model for the electron beam it is found that the theory can account qualitatively and semiquantitatively for the abrupt onset of the waves near D(sub f) = 0, for the narrow width and offset of the high-field region, and for the decrease in wave intensity with increasing D(sub f). Quantitative differences between observations and theory remain, including large overprediction of the wave fields and the slower than predicted falloff at large D(sub f) of the wave fields. These differences, as well as the unresolved issue of the electron beam speed in the high-field region of the foreshock, are discussed. The intrinsic temporal variability of the wave fields, as well as their overprediction based on homogeneous plasma theory, are indicative of stochastic growth physics, which causes wave growth to be random and varying in sign, rather than secular.

Cairns, Iver H.↗

Magnetic flux in modeled magnetic clouds at 1 AU and some specific comparisons to associated photospheric flux

In order to better understand the solar origins of magnetic clouds, statistical distributions of the estimated axial magnetic flux of 30 magnetic clouds at 1 AU, separated according to their occurrence during the solar cycle, were obtained and a comparison was made of the magnetic flux of a magnetic cloud to the aggregate flux of apparently associated photospheric magnetic flux tubes, for some specific cases. The 30 magnetic clouds comprise 12 cases from WIND, and the remainder from IMP-8, earlier IMPs, the International Sun-Earth Explorer (ISEE) 3 and HELIOS. The total magnetic flux along the cloud axis was estimated using a constant alpha, cylindrical, force-free flux rope model to determine cloud diameter and axial magentic field strength. The distribution of magentic fluxes for the 30 clouds is shown to be in the form of a skewed Gaussian.

Lepping, R. P.↗

Research and Development of Rapid Design Systems for Aerospace Structure

This report describes the results of research activities associated with the development of rapid design systems for aerospace structures in support of the Intelligent Synthesis Environment (ISE). The specific subsystems investigated were the interface between model assembly and analysis; and, the high performance NASA GPS equation solver software system in the Windows NT environment on low cost high-performance PCs.

Schaeffer, Harry G.↗

Fine-Scale Filamentary Structure in Coronal Streamers

Doppler scintillation measurements of a coronal streamer lasting several solar rotations have been conducted by Ulysses in 1991 over a heliocentric distance range of 14-77 R(sub 0). By showing that the solar corona is filamentary, and that Doppler frequency is the radio counterpart of white-light eclipse pictures processed to enhance spatial gradients, it is demonstrated that Doppler scintillation measurements provide the high spatial resolution that has long eluded white-light coronagraph measurements. The region of enhanced scintillation, spanning an angular extent of 1.8 deg in heliographic longitude, coincides with the radially expanding streamer stalk and represents filamentary structure with scale sizes at least as small as 340 km (0.5 sec) when extrapolated to the Sun. Within the stalk of the streamer, the fine-scale structure corresponding to scale sizes in the range of 20-340 km at the Sun and associated with closed magnetic fields amounts to a few percent of the mean density, while outside the stalk, the fine-scale structure associated with open fields is an order of magnitude lower. Clustering of filamentary structure that takes place within the stalk of the streamer is suggestive of multiple current sheets. Comparison with ISEE 3 in situ plasma measurements shows that significant evolution resulting from dynamic interaction with increasing heliocentric distance takes place by the time streamers reach Earth orbit.

Woo, Richard↗

Improving Conceptual Design for Launch Vehicles

This report summarizes activities performed during the second year of a three year cooperative agreement between NASA - Langley Research Center and Georgia Tech. Year 1 of the project resulted in the creation of a new Cost and Business Assessment Model (CABAM) for estimating the economic performance of advanced reusable launch vehicles including non-recurring costs, recurring costs, and revenue. The current year (second year) activities were focused on the evaluation of automated, collaborative design frameworks (computation architectures or computational frameworks) for automating the design process in advanced space vehicle design. Consistent with NASA's new thrust area in developing and understanding Intelligent Synthesis Environments (ISE), the goals of this year's research efforts were to develop and apply computer integration techniques and near-term computational frameworks for conducting advanced space vehicle design. NASA - Langley (VAB) has taken a lead role in developing a web-based computing architectures within which the designer can interact with disciplinary analysis tools through a flexible web interface. The advantages of this approach are, 1) flexible access to the designer interface through a simple web browser (e.g. Netscape Navigator), 2) ability to include existing 'legacy' codes, and 3) ability to include distributed analysis tools running on remote computers. To date, VAB's internal emphasis has been on developing this test system for the planetary entry mission under the joint Integrated Design System (IDS) program with NASA - Ames and JPL. Georgia Tech's complementary goals this year were to: 1) Examine an alternate 'custom' computational architecture for the three-discipline IDS planetary entry problem to assess the advantages and disadvantages relative to the web-based approach.and 2) Develop and examine a web-based interface and framework for a typical launch vehicle design problem.

John R. Olds↗

Measuring the Chemical Potential of the Martian Regolith to Generate and Sustain Life

A critical component for identifying chemical biosignatures is the ability to assess in-situ the potential of an aqueous geochemical environment to generate and sustain life. On Mars or other solar bodies, in-situ chemical characterization could provide evidence as to whether the chemical composition of the regolith or evaporites in suspected ancient water bodies have been biologically influenced or possess the chemical parameters within which life may have existed, or may still exist. A variety of analytical techniques have been proposed for use in detecting and identify signatures of past or present life. These techniques fall into two groups; visual observation with instruments such as cameras or optical/atomic-force microscopes; or elemental chemical analysis with such instruments as X-ray fluorescence (XRF) and diffraction (XRD), a-proton backscatter (APX), y-ray, Mossbauer, Raman, IR, UV/VIS spectroscopies, gas chromatography (GC), or mass spectrometry (MS). Direct observation of an identifiable lifeform by the first set of instruments in a single sample is highly unlikely, especially for extinct organisms or on the surface. The later instruments can provide vital data as to the elemental mineralogy and geological history of the planet, but are highly inadequate for understanding the chemistry of the planet in terms of indigenous life or interactions with human explorers. Techniques such as XRD, XRF, and APX, provide elemental composition at high limits of detection. Some of this data can be extrapolated or interpolated to provide chemical parameters such as oxidation state or composition. Gas chromatography (GC) without standards and non-specific detectors, has little chance of identifying a mixture of unknown components. Combined with GC or by itself, mass spectrometry (MS) can provide identification of compounds, but in both cases the sample must be appropriately prepared for accurate and reliable analysis. Life as we know it, and probably identify it as such, requires an aqueous environment. Deciphering die chemical speciation of this aqueous environment is the key to recognizing therein the biosignatures of any extinct or present life forms. Identifying the soluble (ionic and nonionic) components by reacting a currently dormant environment can provide a "picture" of the thermodynamics and chemical components of a possibly bioactive environment. The only devices which can provide such information are electrochemical sensors based on the potentiometric ion selective electrodes (ISEs) and on dynamic techniques such as cyclic voltammetry (CV) and stripping voltammetry (SV). Such an array of devices can provide not only the chemical composition of a water-soluble Martian soil sample, but also several other vital chemical parameters such as pH, conductivity, redox potential, and dissolved gases. To address these issues we have been investigating the possible use of an electrochemically-based ion sensor array as a new integrated approach to quantitative analytical and chemometric electrochemical measurements. The sensor array will consist of specific and semispecific ion selective and amperometric transducers, which can simultaneously and continuously identify and semiquantitatively determine over 50 organic and inorganic analytes in water-based environments. Several individual sensors, based on the same principle, have been flight-tested and have been installed as part of the MECA instrumentation on the Mars 2001 Lander for in-situ analyses. However, the microfabrication, integration and multiplexing of such a large number of these sensors on a single substrate have not been previously attempted.

Kounaves, S. P.↗

The Mars Environmental Compatibility Assessment (MECA)

The Mars Environmental Compatibility Assessment (MECA) will evaluate the Martian environment for soil and dust-related hazards to human exploration as part of the Mars Surveyor Program 2001 Lander. Sponsored by the Human Exploration and Development of Space (HEDS) enterprise, MECA's goal is to evaluate potential geochemical and environmental hazards that may confront future martian explorers, and to guide HEDS scientists in the development of high fidelity Mars soil simulants. In addition to objectives related to human exploration, the MECA data set will be rich in information relevant to basic geology, paleoclimate, and exobiology issues. The integrated MECA payload contains a wet-chemistry laboratory, a microscopy station, an electrometer to characterize the electrostatics of the soil and its environment, and arrays of material patches to study the abrasive and adhesive properties of soil grains. MECA is allocated a mass of 10 kg and a peak power usage of 15 W within an enclosure of 35 x 25 x 15 cm (figures I and 2). The Wet Chemistry Laboratory (WCL) consists of four identical cells that will accept samples from surface and subsurface regions accessible to the Lander's robotic arm, mix them with water, and perform extensive analysis of the solution. Using an array of ion-specific electrodes (ISEs), cyclic voltammetry, and electrochemical techniques, the chemistry cells will wet soil samples for measurement of basic soil properties of pH, redox potential, and conductivity. Total dissolved material, as well as targeted ions will be detected to the ppm level, including important exobiological ions such as Na, K+, Ca++, Mg++, NH4+, Cl, S04-, HC03, as well as more toxic ions such as Cu++, Pb++, Cd++, Hg++, and C104-. MECA's microscopy station combines optical and atomic-force microscopy (AFM) to image dust and soil particles from millimeters to nanometers in size. Illumination by red, green, and blue LEDs is augmented by an ultraviolet LED intended to excite fluorescence in the sample. Substrates were chosen to allow experimental study of size distribution, adhesion, abrasion, hardness, color, shape, aggregation, magnetic and other properties. To aid in the detection of potentially dangerous quartz dust, an abrasion tool measures sample hardness relative to quartz and a hard glass (Zerodur).

Meloy, Thomas P.↗